aboutsummaryrefslogtreecommitdiff
path: root/drivers/ieee1394/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ieee1394/Kconfig')
-rw-r--r--drivers/ieee1394/Kconfig182
1 files changed, 0 insertions, 182 deletions
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
deleted file mode 100644
index e02096cf7d9..00000000000
--- a/drivers/ieee1394/Kconfig
+++ /dev/null
@@ -1,182 +0,0 @@
-config IEEE1394
- tristate "Legacy alternative FireWire driver stack"
- depends on PCI || BROKEN
- help
- IEEE 1394 describes a high performance serial bus, which is also
- known as FireWire(tm) or i.Link(tm) and is used for connecting all
- sorts of devices (most notably digital video cameras) to your
- computer.
-
- If you have FireWire hardware and want to use it, say Y here. This
- is the core support only, you will also need to select a driver for
- your IEEE 1394 adapter.
-
- To compile this driver as a module, say M here: the module will be
- called ieee1394.
-
- NOTE:
- ieee1394 is superseded by the newer firewire-core driver. See
- http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
- further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_OHCI1394
- tristate "OHCI-1394 controllers"
- depends on PCI && IEEE1394
- help
- Enable this driver if you have an IEEE 1394 controller based on the
- OHCI-1394 specification. The current driver is only tested with OHCI
- chipsets made by Texas Instruments and NEC. Most third-party vendors
- use one of these chipsets. It should work with any OHCI-1394
- compliant card, however.
-
- To compile this driver as a module, say M here: the module will be
- called ohci1394.
-
- NOTE:
- ohci1394 is superseded by the newer firewire-ohci driver. See
- http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
- further information on how to switch to the new FireWire drivers.
-
- If you want to install firewire-ohci and ohci1394 together, you
- should configure them only as modules and blacklist the driver(s)
- which you don't want to have auto-loaded. Add either
-
- blacklist ohci1394
- blacklist video1394
- blacklist dv1394
- or
- blacklist firewire-ohci
-
- to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
- depending on your distribution.
-
-comment "PCILynx controller requires I2C"
- depends on IEEE1394 && I2C=n
-
-config IEEE1394_PCILYNX
- tristate "PCILynx controller"
- depends on PCI && IEEE1394 && I2C
- select I2C_ALGOBIT
- help
- Say Y here if you have an IEEE-1394 controller with the Texas
- Instruments PCILynx chip. Note: this driver is written for revision
- 2 of this chip and may not work with revision 0.
-
- To compile this driver as a module, say M here: the module will be
- called pcilynx.
-
- Only some old and now very rare PCI and CardBus cards and
- PowerMacs G3 B&W contain the PCILynx controller. Therefore
- almost everybody can say N here.
-
-comment "SBP-2 support (for storage devices) requires SCSI"
- depends on IEEE1394 && SCSI=n
-
-config IEEE1394_SBP2
- tristate "Storage devices (SBP-2 protocol)"
- depends on IEEE1394 && SCSI
- help
- This option enables you to use SBP-2 devices connected to an IEEE
- 1394 bus. SBP-2 devices include storage devices like harddisks and
- DVD drives, also some other FireWire devices like scanners.
-
- You should also enable support for disks, CD-ROMs, etc. in the SCSI
- configuration section.
-
- To compile this driver as a module, say M here: the module will be
- called sbp2.
-
- NOTE:
- sbp2 is superseded by the newer firewire-sbp2 driver. See
- http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
- further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_SBP2_PHYS_DMA
- bool "Enable replacement for physical DMA in SBP2"
- depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL
- help
- This builds sbp2 for use with non-OHCI host adapters which do not
- support physical DMA or for when ohci1394 is run with phys_dma=0.
- Physical DMA is data movement without assistance of the drivers'
- interrupt handlers. This option includes the interrupt handlers
- that are required in absence of this hardware feature.
-
- This option is buggy and currently broken on some architectures.
- If unsure, say N.
-
-config IEEE1394_ETH1394_ROM_ENTRY
- depends on IEEE1394
- bool
- default n
-
-config IEEE1394_ETH1394
- tristate "IP networking over 1394 (experimental)"
- depends on IEEE1394 && EXPERIMENTAL && INET
- select IEEE1394_ETH1394_ROM_ENTRY
- help
- This driver implements a functional majority of RFC 2734: IPv4 over
- 1394. It will provide IP connectivity with implementations of RFC
- 2734 found on other operating systems. It will not communicate with
- older versions of this driver found in stock kernels prior to 2.6.3.
- This driver is still considered experimental. It does not yet support
- MCAP, therefore multicast support is significantly limited.
-
- The module is called eth1394 although it does not emulate Ethernet.
-
- NOTE:
- eth1394 is superseded by the newer firewire-net driver. See
- http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
- further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_RAWIO
- tristate "raw1394 userspace interface"
- depends on IEEE1394
- help
- This option adds support for the raw1394 device file which enables
- direct communication of user programs with IEEE 1394 devices
- (isochronous and asynchronous). Almost all application programs
- which access FireWire require this option.
-
- To compile this driver as a module, say M here: the module will be
- called raw1394.
-
- NOTE:
- raw1394 is superseded by the newer firewire-core driver. See
- http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
- further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_VIDEO1394
- tristate "video1394 userspace interface"
- depends on IEEE1394 && IEEE1394_OHCI1394
- help
- This option adds support for the video1394 device files which enable
- isochronous communication of user programs with IEEE 1394 devices,
- especially video capture or export. This interface is used by all
- libdc1394 based programs and by several other programs, in addition to
- the raw1394 interface. It is generally not required for DV capture.
-
- To compile this driver as a module, say M here: the module will be
- called video1394.
-
- NOTE:
- video1394 is superseded by the newer firewire-core driver. See
- http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for
- further information on how to switch to the new FireWire drivers.
-
-config IEEE1394_DV1394
- tristate "dv1394 userspace interface (deprecated)"
- depends on IEEE1394 && IEEE1394_OHCI1394
- help
- The dv1394 driver is unsupported and may be removed from Linux in a
- future release. Its functionality is now provided by either
- raw1394 or firewire-core together with libraries such as libiec61883.
-
-config IEEE1394_VERBOSEDEBUG
- bool "Excessive debugging output"
- depends on IEEE1394
- help
- If you say Y here, you will get very verbose debugging logs from the
- ieee1394 drivers, including sent and received packet headers. This
- will quickly result in large amounts of data sent to the system log.
-
- Say Y if you really need the debugging output. Everyone else says N.