diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/gayle.c | 147 |
1 files changed, 82 insertions, 65 deletions
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c index b9e517de6a8..3feaa26410b 100644 --- a/drivers/ide/gayle.c +++ b/drivers/ide/gayle.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/zorro.h> #include <linux/module.h> +#include <linux/platform_device.h> #include <asm/setup.h> #include <asm/amigahw.h> @@ -24,15 +25,6 @@ /* - * Bases of the IDE interfaces - */ - -#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */ -#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */ - -#define GAYLE_IDEREG_SIZE 0x2000 - - /* * Offsets from one of the above bases */ @@ -68,20 +60,20 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); static int gayle_test_irq(ide_hwif_t *hwif) { - unsigned char ch; + unsigned char ch; - ch = z_readb(hwif->io_ports.irq_addr); - if (!(ch & GAYLE_IRQ_IDE)) - return 0; - return 1; + ch = z_readb(hwif->io_ports.irq_addr); + if (!(ch & GAYLE_IRQ_IDE)) + return 0; + return 1; } static void gayle_a1200_clear_irq(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; + ide_hwif_t *hwif = drive->hwif; - (void)z_readb(hwif->io_ports.status_addr); - z_writeb(0x7c, hwif->io_ports.irq_addr); + (void)z_readb(hwif->io_ports.status_addr); + z_writeb(0x7c, hwif->io_ports.irq_addr); } static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base, @@ -122,64 +114,89 @@ static const struct ide_port_info gayle_port_info = { * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */ -static int __init gayle_init(void) +static int __init amiga_gayle_ide_probe(struct platform_device *pdev) { - unsigned long phys_base, res_start, res_n; - unsigned long base, ctrlport, irqport; - int a4000, i, rc; - struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; - struct ide_port_info d = gayle_port_info; - - if (!MACH_IS_AMIGA) - return -ENODEV; - - if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) - goto found; - -#ifdef CONFIG_ZORRO - if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE, - NULL)) - goto found; -#endif - return -ENODEV; - -found: - printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", - a4000 ? 4000 : 1200, - ide_doubler ? ", IDE doubler" : ""); - - if (a4000) { - phys_base = GAYLE_BASE_4000; - irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000); - d.port_ops = &gayle_a4000_port_ops; - } else { - phys_base = GAYLE_BASE_1200; - irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200); - d.port_ops = &gayle_a1200_port_ops; + struct resource *res; + struct gayle_ide_platform_data *pdata; + unsigned long base, ctrlport, irqport; + unsigned int i; + int error; + struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; + struct ide_port_info d = gayle_port_info; + struct ide_host *host; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + if (!request_mem_region(res->start, resource_size(res), "IDE")) + return -EBUSY; + + pdata = pdev->dev.platform_data; + pr_info("ide: Gayle IDE controller (A%u style%s)\n", + pdata->explicit_ack ? 1200 : 4000, + ide_doubler ? ", IDE doubler" : ""); + + base = (unsigned long)ZTWO_VADDR(pdata->base); + ctrlport = 0; + irqport = (unsigned long)ZTWO_VADDR(pdata->irqport); + if (pdata->explicit_ack) + d.port_ops = &gayle_a1200_port_ops; + else + d.port_ops = &gayle_a4000_port_ops; + + for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) { + if (GAYLE_HAS_CONTROL_REG) + ctrlport = base + GAYLE_CONTROL; + + gayle_setup_ports(&hw[i], base, ctrlport, irqport); + hws[i] = &hw[i]; } - res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1); - res_n = GAYLE_IDEREG_SIZE; + error = ide_host_add(&d, hws, i, &host); + if (error) + goto out; - if (!request_mem_region(res_start, res_n, "IDE")) - return -EBUSY; + platform_set_drvdata(pdev, host); + return 0; - for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { - base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT); - ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0; +out: + release_mem_region(res->start, resource_size(res)); + return error; +} + +static int __exit amiga_gayle_ide_remove(struct platform_device *pdev) +{ + struct ide_host *host = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + ide_host_remove(host); + release_mem_region(res->start, resource_size(res)); + return 0; +} - gayle_setup_ports(&hw[i], base, ctrlport, irqport); +static struct platform_driver amiga_gayle_ide_driver = { + .remove = __exit_p(amiga_gayle_ide_remove), + .driver = { + .name = "amiga-gayle-ide", + .owner = THIS_MODULE, + }, +}; - hws[i] = &hw[i]; - } +static int __init amiga_gayle_ide_init(void) +{ + return platform_driver_probe(&amiga_gayle_ide_driver, + amiga_gayle_ide_probe); +} - rc = ide_host_add(&d, hws, i, NULL); - if (rc) - release_mem_region(res_start, res_n); +module_init(amiga_gayle_ide_init); - return rc; +static void __exit amiga_gayle_ide_exit(void) +{ + platform_driver_unregister(&amiga_gayle_ide_driver); } -module_init(gayle_init); +module_exit(amiga_gayle_ide_exit); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:amiga-gayle-ide"); |