aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig18
-rw-r--r--drivers/ide/Makefile2
-rw-r--r--drivers/ide/ide-atapi.c248
-rw-r--r--drivers/ide/ide-cd.c99
-rw-r--r--drivers/ide/ide-cd.h12
-rw-r--r--drivers/ide/ide-floppy.c28
-rw-r--r--drivers/ide/ide-floppy_ioctl.c58
-rw-r--r--drivers/ide/ide-io.c282
-rw-r--r--drivers/ide/ide-ioctls.c3
-rw-r--r--drivers/ide/ide-park.c13
-rw-r--r--drivers/ide/ide-probe.c223
-rw-r--r--drivers/ide/ide-sysfs.c125
-rw-r--r--drivers/ide/ide-tape.c2
-rw-r--r--drivers/ide/ide.c72
-rw-r--r--drivers/ide/tx4938ide.c11
-rw-r--r--drivers/ide/tx4939ide.c43
16 files changed, 545 insertions, 694 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index c9f21e3d4ea..4ee85fcf9aa 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -137,6 +137,7 @@ config BLK_DEV_DELKIN
config BLK_DEV_IDECD
tristate "Include IDE/ATAPI CDROM support"
+ select IDE_ATAPI
---help---
If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
@@ -185,23 +186,6 @@ config BLK_DEV_IDETAPE
To compile this driver as a module, choose M here: the
module will be called ide-tape.
-config BLK_DEV_IDESCSI
- tristate "SCSI emulation support (DEPRECATED)"
- depends on SCSI
- select IDE_ATAPI
- ---help---
- WARNING: ide-scsi is no longer needed for cd writing applications!
- The 2.6 kernel supports direct writing to ide-cd, which eliminates
- the need for ide-scsi + the entire scsi stack just for writing a
- cd. The new method is more efficient in every way.
-
- This will provide SCSI host adapter emulation for IDE ATAPI devices,
- and will allow you to use a SCSI device driver instead of a native
- ATAPI driver.
-
- If both this SCSI emulation and native ATAPI support are compiled
- into the kernel, the native support will be used.
-
config BLK_DEV_IDEACPI
bool "IDE ACPI support"
depends on ACPI
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 177e3f8523e..410728992e6 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -5,7 +5,7 @@
EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o
+ ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o ide-sysfs.o
# core IDE code
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 4e58b9e7a58..e8688c0f864 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -3,6 +3,7 @@
*/
#include <linux/kernel.h>
+#include <linux/cdrom.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
@@ -14,6 +15,13 @@
#define debug_log(fmt, args...) do {} while (0)
#endif
+#define ATAPI_MIN_CDB_BYTES 12
+
+static inline int dev_is_idecd(ide_drive_t *drive)
+{
+ return drive->media == ide_cdrom || drive->media == ide_optical;
+}
+
/*
* Check whether we can support a device,
* based on the ATAPI IDENTIFY command results.
@@ -233,18 +241,49 @@ void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
}
EXPORT_SYMBOL_GPL(ide_retry_pc);
-int ide_scsi_expiry(ide_drive_t *drive)
+int ide_cd_expiry(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc = drive->pc;
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned long wait = 0;
- debug_log("%s called for %lu at %lu\n", __func__,
- pc->scsi_cmd->serial_number, jiffies);
+ debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
- pc->flags |= PC_FLAG_TIMEDOUT;
+ /*
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
+ */
+ switch (rq->cmd[0]) {
+ case GPCMD_BLANK:
+ case GPCMD_FORMAT_UNIT:
+ case GPCMD_RESERVE_RZONE_TRACK:
+ case GPCMD_CLOSE_TRACK:
+ case GPCMD_FLUSH_CACHE:
+ wait = ATAPI_WAIT_PC;
+ break;
+ default:
+ if (!(rq->cmd_flags & REQ_QUIET))
+ printk(KERN_INFO "cmd 0x%x timed out\n",
+ rq->cmd[0]);
+ wait = 0;
+ break;
+ }
+ return wait;
+}
+EXPORT_SYMBOL_GPL(ide_cd_expiry);
- return 0; /* we do not want the IDE subsystem to retry */
+int ide_cd_get_xferlen(struct request *rq)
+{
+ if (blk_fs_request(rq))
+ return 32768;
+ else if (blk_sense_request(rq) || blk_pc_request(rq) ||
+ rq->cmd_type == REQ_TYPE_ATA_PC)
+ return rq->data_len;
+ else
+ return 0;
}
-EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
/*
* This is the usual interrupt handler which will be called during a packet
@@ -258,21 +297,14 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
struct request *rq = hwif->hwgroup->rq;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
xfer_func_t *xferfunc;
- ide_expiry_t *expiry;
unsigned int timeout, temp;
u16 bcount;
- u8 stat, ireason, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI), dsc = 0;
+ u8 stat, ireason, dsc = 0;
debug_log("Enter %s - interrupt handler\n", __func__);
- if (scsi) {
- timeout = ide_scsi_get_timeout(pc);
- expiry = ide_scsi_expiry;
- } else {
- timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
- : WAIT_TAPE_CMD;
- expiry = NULL;
- }
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
if (pc->flags & PC_FLAG_TIMEDOUT) {
drive->pc_callback(drive, 0);
@@ -284,8 +316,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
if (hwif->dma_ops->dma_end(drive) ||
- (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) {
- if (drive->media == ide_floppy && !scsi)
+ (drive->media == ide_tape && (stat & ATA_ERR))) {
+ if (drive->media == ide_floppy)
printk(KERN_ERR "%s: DMA %s error\n",
drive->name, rq_data_dir(pc->rq)
? "write" : "read");
@@ -307,7 +339,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
local_irq_enable_in_hardirq();
- if (drive->media == ide_tape && !scsi &&
+ if (drive->media == ide_tape &&
(stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
stat &= ~ATA_ERR;
@@ -315,11 +347,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
/* Error detected */
debug_log("%s: I/O error\n", drive->name);
- if (drive->media != ide_tape || scsi) {
+ if (drive->media != ide_tape)
pc->rq->errors++;
- if (scsi)
- goto cmd_finished;
- }
if (rq->cmd[0] == REQUEST_SENSE) {
printk(KERN_ERR "%s: I/O error in request sense"
@@ -335,7 +364,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
/* queued, but not started */
return ide_stopped;
}
-cmd_finished:
pc->error = 0;
if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
@@ -382,25 +410,8 @@ cmd_finished:
"us more data than expected - "
"discarding data\n",
drive->name);
- if (scsi)
- temp = pc->buf_size - pc->xferred;
- else
- temp = 0;
- if (temp) {
- if (pc->sg)
- drive->pc_io_buffers(drive, pc,
- temp, 0);
- else
- tp_ops->input_data(drive, NULL,
- pc->cur_pos, temp);
- printk(KERN_ERR "%s: transferred %d of "
- "%d bytes\n",
- drive->name,
- temp, bcount);
- }
- pc->xferred += temp;
- pc->cur_pos += temp;
- ide_pad_transfer(drive, 0, bcount - temp);
+
+ ide_pad_transfer(drive, 0, bcount);
goto next_irq;
}
debug_log("The device wants to send us more data than "
@@ -410,14 +421,13 @@ cmd_finished:
} else
xferfunc = tp_ops->output_data;
- if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
- (drive->media == ide_tape && !scsi && pc->bh) ||
- (scsi && pc->sg)) {
+ if ((drive->media == ide_floppy && !pc->buf) ||
+ (drive->media == ide_tape && pc->bh)) {
int done = drive->pc_io_buffers(drive, pc, bcount,
!!(pc->flags & PC_FLAG_WRITING));
/* FIXME: don't do partial completions */
- if (drive->media == ide_floppy && !scsi)
+ if (drive->media == ide_floppy)
ide_end_request(drive, 1, done >> 9);
} else
xferfunc(drive, NULL, pc->cur_pos, bcount);
@@ -430,7 +440,7 @@ cmd_finished:
rq->cmd[0], bcount);
next_irq:
/* And set the interrupt handler again */
- ide_set_handler(drive, ide_pc_intr, timeout, expiry);
+ ide_set_handler(drive, ide_pc_intr, timeout, NULL);
return ide_started;
}
@@ -479,11 +489,12 @@ static int ide_delayed_transfer_pc(ide_drive_t *drive)
static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc = drive->pc;
+ struct ide_atapi_pc *uninitialized_var(pc);
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
ide_expiry_t *expiry;
unsigned int timeout;
+ int cmd_len;
ide_startstop_t startstop;
u8 ireason;
@@ -493,101 +504,124 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
return startstop;
}
- ireason = ide_read_ireason(drive);
- if (drive->media == ide_tape &&
- (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
- ireason = ide_wait_ireason(drive, ireason);
-
- if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
- printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
- "a packet command\n", drive->name);
- return ide_do_reset(drive);
+ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 1;
}
- /*
- * If necessary schedule the packet transfer to occur 'timeout'
- * miliseconds later in ide_delayed_transfer_pc() after the device
- * says it's ready for a packet.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = drive->pc_delay;
- expiry = &ide_delayed_transfer_pc;
+ if (dev_is_idecd(drive)) {
+ /* ATAPI commands get padded out to 12 bytes minimum */
+ cmd_len = COMMAND_SIZE(rq->cmd[0]);
+ if (cmd_len < ATAPI_MIN_CDB_BYTES)
+ cmd_len = ATAPI_MIN_CDB_BYTES;
+
+ timeout = rq->timeout;
+ expiry = ide_cd_expiry;
} else {
- if (drive->dev_flags & IDE_DFLAG_SCSI) {
- timeout = ide_scsi_get_timeout(pc);
- expiry = ide_scsi_expiry;
+ pc = drive->pc;
+
+ cmd_len = ATAPI_MIN_CDB_BYTES;
+
+ /*
+ * If necessary schedule the packet transfer to occur 'timeout'
+ * miliseconds later in ide_delayed_transfer_pc() after the
+ * device says it's ready for a packet.
+ */
+ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
+ timeout = drive->pc_delay;
+ expiry = &ide_delayed_transfer_pc;
} else {
timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
: WAIT_TAPE_CMD;
expiry = NULL;
}
+
+ ireason = ide_read_ireason(drive);
+ if (drive->media == ide_tape)
+ ireason = ide_wait_ireason(drive, ireason);
+
+ if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
+ printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
+ "a packet command\n", drive->name);
+
+ return ide_do_reset(drive);
+ }
}
/* Set the interrupt routine */
ide_set_handler(drive, ide_pc_intr, timeout, expiry);
/* Begin DMA, if necessary */
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
+ if (dev_is_idecd(drive)) {
+ if (drive->dma)
+ hwif->dma_ops->dma_start(drive);
+ } else {
+ if (pc->flags & PC_FLAG_DMA_OK) {
+ pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
+ hwif->dma_ops->dma_start(drive);
+ }
}
/* Send the actual packet */
if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
- hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12);
+ hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
return ide_started;
}
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
- ide_expiry_t *expiry)
+ide_startstop_t ide_issue_pc(ide_drive_t *drive)
{
- struct ide_atapi_pc *pc = drive->pc;
+ struct ide_atapi_pc *pc;
ide_hwif_t *hwif = drive->hwif;
+ ide_expiry_t *expiry = NULL;
+ unsigned int timeout;
u32 tf_flags;
u16 bcount;
- u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
+ if (dev_is_idecd(drive)) {
+ tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ bcount = ide_cd_get_xferlen(hwif->hwgroup->rq);
+ expiry = ide_cd_expiry;
+ timeout = ATAPI_WAIT_PC;
- /* Request to transfer the entire buffer at once */
- if (drive->media == ide_tape && scsi == 0)
- bcount = pc->req_xfer;
- else
- bcount = min(pc->req_xfer, 63 * 1024);
+ if (drive->dma)
+ drive->dma = !hwif->dma_ops->dma_setup(drive);
+ } else {
+ pc = drive->pc;
- if (pc->flags & PC_FLAG_DMA_ERROR) {
- pc->flags &= ~PC_FLAG_DMA_ERROR;
- ide_dma_off(drive);
- }
+ /* We haven't transferred any data yet */
+ pc->xferred = 0;
+ pc->cur_pos = pc->buf;
- if ((pc->flags & PC_FLAG_DMA_OK) &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
- if (scsi)
- hwif->sg_mapped = 1;
- drive->dma = !hwif->dma_ops->dma_setup(drive);
- if (scsi)
- hwif->sg_mapped = 0;
- }
+ tf_flags = IDE_TFLAG_OUT_DEVICE;
+ bcount = ((drive->media == ide_tape) ?
+ pc->req_xfer :
+ min(pc->req_xfer, 63 * 1024));
- if (!drive->dma)
- pc->flags &= ~PC_FLAG_DMA_OK;
+ if (pc->flags & PC_FLAG_DMA_ERROR) {
+ pc->flags &= ~PC_FLAG_DMA_ERROR;
+ ide_dma_off(drive);
+ }
- if (scsi)
- tf_flags = 0;
- else if (drive->media == ide_cdrom || drive->media == ide_optical)
- tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
- else
- tf_flags = IDE_TFLAG_OUT_DEVICE;
+ if ((pc->flags & PC_FLAG_DMA_OK) &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA))
+ drive->dma = !hwif->dma_ops->dma_setup(drive);
+
+ if (!drive->dma)
+ pc->flags &= ~PC_FLAG_DMA_OK;
+
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
+ }
ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
+ if (drive->dma)
+ drive->waiting_for_dma = 0;
ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
- timeout, NULL);
+ timeout, expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 5daa4dd1b01..1a7410f8824 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -53,14 +53,6 @@
#include "ide-cd.h"
-#define IDECD_DEBUG_LOG 1
-
-#if IDECD_DEBUG_LOG
-#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
-#else
-#define ide_debug_log(lvl, fmt, args...) do {} while (0)
-#endif
-
static DEFINE_MUTEX(idecd_ref_mutex);
static void ide_cd_release(struct kref *);
@@ -519,37 +511,8 @@ end_request:
return 1;
}
-static int cdrom_timer_expiry(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned long wait = 0;
-
- ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
- rq->cmd[0]);
-
- /*
- * Some commands are *slow* and normally take a long time to complete.
- * Usually we can use the ATAPI "disconnect" to bypass this, but not all
- * commands/drives support that. Let ide_timer_expiry keep polling us
- * for these.
- */
- switch (rq->cmd[0]) {
- case GPCMD_BLANK:
- case GPCMD_FORMAT_UNIT:
- case GPCMD_RESERVE_RZONE_TRACK:
- case GPCMD_CLOSE_TRACK:
- case GPCMD_FLUSH_CACHE:
- wait = ATAPI_WAIT_PC;
- break;
- default:
- if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO PFX "cmd 0x%x timed out\n",
- rq->cmd[0]);
- wait = 0;
- break;
- }
- return wait;
-}
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
+static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
/*
* Set up the device registers for transferring a packet command on DEV,
@@ -559,11 +522,13 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
* called when the interrupt from the drive arrives. Otherwise, HANDLER
* will be called immediately after the drive is prepared for the transfer.
*/
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
- int xferlen,
- ide_handler_t *handler)
+static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->hwgroup->rq;
+ int xferlen;
+
+ xferlen = ide_cd_get_xferlen(rq);
ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
@@ -581,13 +546,14 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
drive->waiting_for_dma = 0;
/* packet command */
- ide_execute_command(drive, ATA_CMD_PACKET, handler,
- ATAPI_WAIT_PC, cdrom_timer_expiry);
+ ide_execute_command(drive, ATA_CMD_PACKET,
+ cdrom_transfer_packet_command,
+ ATAPI_WAIT_PC, ide_cd_expiry);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
- return (*handler) (drive);
+ return cdrom_transfer_packet_command(drive);
}
}
@@ -598,11 +564,10 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
* there's data ready.
*/
#define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
- struct request *rq,
- ide_handler_t *handler)
+static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->hwgroup->rq;
int cmd_len;
ide_startstop_t startstop;
@@ -629,7 +594,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
}
/* arm the interrupt handler */
- ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
+ ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
cmd_len = COMMAND_SIZE(rq->cmd[0]);
@@ -717,8 +682,6 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
return 1;
}
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
struct request *rq)
{
@@ -761,20 +724,6 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
}
/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->hwgroup->rq;
-
- /* send the command to the drive and return */
- return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
-}
-
-/*
* Fix up a possibly partially-processed request so that we can start it over
* entirely, or even put it back on the request queue.
*/
@@ -1096,7 +1045,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
} else {
timeout = ATAPI_WAIT_PC;
if (!blk_fs_request(rq))
- expiry = cdrom_timer_expiry;
+ expiry = ide_cd_expiry;
}
ide_set_handler(drive, cdrom_newpc_intr, timeout, expiry);
@@ -1163,13 +1112,6 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
return ide_started;
}
-static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
-
- return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
-}
-
static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
@@ -1214,18 +1156,12 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
sector_t block)
{
- ide_handler_t *fn;
- int xferlen;
-
ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, "
"rq->cmd_type: 0x%x, block: %llu\n",
__func__, rq->cmd[0], rq->cmd_type,
(unsigned long long)block);
if (blk_fs_request(rq)) {
- xferlen = 32768;
- fn = cdrom_start_rw_cont;
-
if (cdrom_start_rw(drive, rq) == ide_stopped)
return ide_stopped;
@@ -1233,9 +1169,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_stopped;
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
- xferlen = rq->data_len;
- fn = cdrom_do_newpc_cont;
-
if (!rq->timeout)
rq->timeout = ATAPI_WAIT_PC;
@@ -1250,7 +1183,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_stopped;
}
- return cdrom_start_packet_command(drive, xferlen, fn);
+ return cdrom_start_packet_command(drive);
}
/*
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index d5ce3362dbd..bf676b26218 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -8,10 +8,14 @@
#include <linux/cdrom.h>
#include <asm/byteorder.h>
-/*
- * typical timeout for packet command
- */
-#define ATAPI_WAIT_PC (60 * HZ)
+#define IDECD_DEBUG_LOG 0
+
+#if IDECD_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#else
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
+#endif
+
#define ATAPI_WAIT_WRITE_BUSY (10 * HZ)
/************************************************************************/
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index aeb1ad782f5..0a48e2dc53a 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -197,7 +197,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -342,38 +342,38 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
* Look at the flexible disk page parameters. We ignore the CHS capacity
* parameters and use the LBA parameters instead.
*/
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
+static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
- struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
- if (ide_queue_pc_tail(drive, disk, &pc)) {
+ if (ide_queue_pc_tail(drive, disk, pc)) {
printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
- if (pc.buf[3] & 0x80)
+ if (pc->buf[3] & 0x80)
drive->dev_flags |= IDE_DFLAG_WP;
else
drive->dev_flags &= ~IDE_DFLAG_WP;
set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
- page = &pc.buf[8];
+ page = &pc->buf[8];
- transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]);
- sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]);
- cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]);
- rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]);
- heads = pc.buf[8 + 4];
- sectors = pc.buf[8 + 5];
+ transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
+ sector_size = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
+ cyls = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
+ rpm = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
+ heads = pc->buf[8 + 4];
+ sectors = pc->buf[8 + 5];
capacity = cyls * heads * sectors * sector_size;
@@ -499,7 +499,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
/* Clik! disk does not support get_flexible_disk_page */
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
- (void) ide_floppy_get_flexible_disk_page(drive);
+ (void) ide_floppy_get_flexible_disk_page(drive, &pc);
return rc;
}
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 2bc51ff73fe..8f8be854603 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -31,10 +31,11 @@
* On exit we set nformats to the number of records we've actually initialized.
*/
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_capacities(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
int __user *argp;
@@ -45,13 +46,13 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_array_size <= 0)
return -EINVAL;
- ide_floppy_create_read_capacity_cmd(&pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
+ ide_floppy_create_read_capacity_cmd(pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return -EIO;
}
- header_len = pc.buf[3];
+ header_len = pc->buf[3];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
u_index = 0;
@@ -68,8 +69,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
if (u_index >= u_array_size)
break; /* User-supplied buffer too small */
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+ blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]);
+ length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]);
if (put_user(blocks, argp))
return -EFAULT;
@@ -111,29 +112,28 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
pc->flags |= PC_FLAG_WRITING;
}
-static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
+static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
drive->atapi_flags &= ~IDE_AFLAG_SRFP;
- ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
- pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+ ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
+ pc->flags |= PC_FLAG_SUPPRESS_ERROR;
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
return 1;
- if (pc.buf[8 + 2] & 0x40)
+ if (pc->buf[8 + 2] & 0x40)
drive->atapi_flags |= IDE_AFLAG_SRFP;
return 0;
}
-static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
int blocks, length, flags, err = 0;
if (floppy->openers > 1) {
@@ -166,10 +166,10 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
goto out;
}
- (void)ide_floppy_get_sfrp_bit(drive);
- ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags);
+ ide_floppy_get_sfrp_bit(drive, pc);
+ ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
err = -EIO;
out:
@@ -188,15 +188,16 @@ out:
* the dsc bit, and return either 0 or 65536.
*/
-static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_progress(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
+ int __user *arg)
{
struct ide_disk_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
int progress_indication = 0x10000;
if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- ide_create_request_sense_cmd(drive, &pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ ide_create_request_sense_cmd(drive, pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, pc))
return -EIO;
if (floppy->sense_key == 2 &&
@@ -241,20 +242,21 @@ static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
return 0;
}
-static int ide_floppy_format_ioctl(ide_drive_t *drive, fmode_t mode,
- unsigned int cmd, void __user *argp)
+static int ide_floppy_format_ioctl(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ fmode_t mode, unsigned int cmd,
+ void __user *argp)
{
switch (cmd) {
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
return 0;
case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, argp);
+ return ide_floppy_get_format_capacities(drive, pc, argp);
case IDEFLOPPY_IOCTL_FORMAT_START:
if (!(mode & FMODE_WRITE))
return -EPERM;
- return ide_floppy_format_unit(drive, (int __user *)argp);
+ return ide_floppy_format_unit(drive, pc, (int __user *)argp);
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return ide_floppy_get_format_progress(drive, argp);
+ return ide_floppy_get_format_progress(drive, pc, argp);
default:
return -ENOTTY;
}
@@ -270,7 +272,7 @@ int ide_floppy_ioctl(ide_drive_t *drive, struct block_device *bdev,
if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
return ide_floppy_lockdoor(drive, &pc, arg, cmd);
- err = ide_floppy_format_ioctl(drive, mode, cmd, argp);
+ err = ide_floppy_format_ioctl(drive, &pc, mode, cmd, argp);
if (err != -ENOTTY)
return err;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index ecacc008fda..1c36a8e83d3 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -426,9 +426,6 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
- if (hwif->sg_mapped) /* needed by ide-scsi */
- return;
-
if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
} else {
@@ -667,85 +664,10 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
drive->sleep = timeout + jiffies;
drive->dev_flags |= IDE_DFLAG_SLEEPING;
}
-
EXPORT_SYMBOL(ide_stall_queue);
-#define WAKEUP(drive) ((drive)->service_start + 2 * (drive)->service_time)
-
-/**
- * choose_drive - select a drive to service
- * @hwgroup: hardware group to select on
- *
- * choose_drive() selects the next drive which will be serviced.
- * This is necessary because the IDE layer can't issue commands
- * to both drives on the same cable, unlike SCSI.
- */
-
-static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup)
-{
- ide_drive_t *drive, *best;
-
-repeat:
- best = NULL;
- drive = hwgroup->drive;
-
- /*
- * drive is doing pre-flush, ordered write, post-flush sequence. even
- * though that is 3 requests, it must be seen as a single transaction.
- * we must not preempt this drive until that is complete
- */
- if (blk_queue_flushing(drive->queue)) {
- /*
- * small race where queue could get replugged during
- * the 3-request flush cycle, just yank the plug since
- * we want it to finish asap
- */
- blk_remove_plug(drive->queue);
- return drive;
- }
-
- do {
- u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
- u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
-
- if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
- !elv_queue_empty(drive->queue)) {
- if (best == NULL ||
- (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
- (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
- if (!blk_queue_plugged(drive->queue))
- best = drive;
- }
- }
- } while ((drive = drive->next) != hwgroup->drive);
-
- if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
- (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
- best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
- long t = (signed long)(WAKEUP(best) - jiffies);
- if (t >= WAIT_MIN_SLEEP) {
- /*
- * We *may* have some time to spare, but first let's see if
- * someone can potentially benefit from our nice mood today..
- */
- drive = best->next;
- do {
- if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
- && time_before(jiffies - best->service_time, WAKEUP(drive))
- && time_before(WAKEUP(drive), jiffies + t))
- {
- ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP));
- goto repeat;
- }
- } while ((drive = drive->next) != best);
- }
- }
- return best;
-}
-
/*
* Issue a new request to a drive from hwgroup
- * Caller must have already done spin_lock_irqsave(&hwgroup->lock, ..);
*
* A hwgroup is a serialized group of IDE interfaces. Usually there is
* exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
@@ -757,8 +679,7 @@ repeat:
* possibly along with many other devices. This is especially common in
* PCI-based systems with off-board IDE controller cards.
*
- * The IDE driver uses a per-hwgroup spinlock to protect
- * access to the request queues, and to protect the hwgroup->busy flag.
+ * The IDE driver uses a per-hwgroup lock to protect the hwgroup->busy flag.
*
* The first thread into the driver for a particular hwgroup sets the
* hwgroup->busy flag to indicate that this hwgroup is now active,
@@ -778,69 +699,41 @@ repeat:
* the driver. This makes the driver much more friendlier to shared IRQs
* than previous designs, while remaining 100% (?) SMP safe and capable.
*/
-static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
+void do_ide_request(struct request_queue *q)
{
- ide_drive_t *drive;
- ide_hwif_t *hwif;
+ ide_drive_t *drive = q->queuedata;
+ ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
struct request *rq;
ide_startstop_t startstop;
- int loops = 0;
-
- /* caller must own hwgroup->lock */
- BUG_ON(!irqs_disabled());
-
- while (!hwgroup->busy) {
- hwgroup->busy = 1;
- /* for atari only */
- ide_get_lock(ide_intr, hwgroup);
- drive = choose_drive(hwgroup);
- if (drive == NULL) {
- int sleeping = 0;
- unsigned long sleep = 0; /* shut up, gcc */
- hwgroup->rq = NULL;
- drive = hwgroup->drive;
- do {
- if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
- (sleeping == 0 ||
- time_before(drive->sleep, sleep))) {
- sleeping = 1;
- sleep = drive->sleep;
- }
- } while ((drive = drive->next) != hwgroup->drive);
- if (sleeping) {
+
+ /*
+ * drive is doing pre-flush, ordered write, post-flush sequence. even
+ * though that is 3 requests, it must be seen as a single transaction.
+ * we must not preempt this drive until that is complete
+ */
+ if (blk_queue_flushing(q))
/*
- * Take a short snooze, and then wake up this hwgroup again.
- * This gives other hwgroups on the same a chance to
- * play fairly with us, just in case there are big differences
- * in relative throughputs.. don't want to hog the cpu too much.
+ * small race where queue could get replugged during
+ * the 3-request flush cycle, just yank the plug since
+ * we want it to finish asap
*/
- if (time_before(sleep, jiffies + WAIT_MIN_SLEEP))
- sleep = jiffies + WAIT_MIN_SLEEP;
-#if 1
- if (timer_pending(&hwgroup->timer))
- printk(KERN_CRIT "ide_set_handler: timer already active\n");
-#endif
- /* so that ide_timer_expiry knows what to do */
- hwgroup->sleeping = 1;
- hwgroup->req_gen_timer = hwgroup->req_gen;
- mod_timer(&hwgroup->timer, sleep);
- /* we purposely leave hwgroup->busy==1
- * while sleeping */
- } else {
- /* Ugly, but how can we sleep for the lock
- * otherwise? perhaps from tq_disk?
- */
+ blk_remove_plug(q);
- /* for atari only */
- ide_release_lock();
- hwgroup->busy = 0;
- }
+ spin_unlock_irq(q->queue_lock);
+ spin_lock_irq(&hwgroup->lock);
+
+ if (!ide_lock_hwgroup(hwgroup)) {
+repeat:
+ hwgroup->rq = NULL;
- /* no more work for this hwgroup (for now) */
- return;
+ if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
+ if (time_before(drive->sleep, jiffies)) {
+ ide_unlock_hwgroup(hwgroup);
+ goto plug_device;
+ }
}
- again:
- hwif = HWIF(drive);
+
if (hwif != hwgroup->hwif) {
/*
* set nIEN for previous hwif, drives in the
@@ -852,16 +745,20 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
hwgroup->hwif = hwif;
hwgroup->drive = drive;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
- drive->service_start = jiffies;
+ spin_unlock_irq(&hwgroup->lock);
+ spin_lock_irq(q->queue_lock);
/*
* we know that the queue isn't empty, but this can happen
* if the q->prep_rq_fn() decides to kill a request
*/
rq = elv_next_request(drive->queue);
+ spin_unlock_irq(q->queue_lock);
+ spin_lock_irq(&hwgroup->lock);
+
if (!rq) {
- hwgroup->busy = 0;
- break;
+ ide_unlock_hwgroup(hwgroup);
+ goto out;
}
/*
@@ -876,53 +773,36 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
* though. I hope that doesn't happen too much, hopefully not
* unless the subdriver triggers such a thing in its own PM
* state machine.
- *
- * We count how many times we loop here to make sure we service
- * all drives in the hwgroup without looping for ever
*/
if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
blk_pm_request(rq) == 0 &&
(rq->cmd_flags & REQ_PREEMPT) == 0) {
- drive = drive->next ? drive->next : hwgroup->drive;
- if (loops++ < 4 && !blk_queue_plugged(drive->queue))
- goto again;
- /* We clear busy, there should be no pending ATA command at this point. */
- hwgroup->busy = 0;
- break;
+ /* there should be no pending command at this point */
+ ide_unlock_hwgroup(hwgroup);
+ goto plug_device;
}
hwgroup->rq = rq;
- /*
- * Some systems have trouble with IDE IRQs arriving while
- * the driver is still setting things up. So, here we disable
- * the IRQ used by this interface while the request is being started.
- * This may look bad at first, but pretty much the same thing
- * happens anyway when any interrupt comes in, IDE or otherwise
- * -- the kernel masks the IRQ while it is being handled.
- */
- if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
- disable_irq_nosync(hwif->irq);
- spin_unlock(&hwgroup->lock);
- local_irq_enable_in_hardirq();
- /* allow other IRQs while we start this request */
+ spin_unlock_irq(&hwgroup->lock);
startstop = start_request(drive, rq);
spin_lock_irq(&hwgroup->lock);
- if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
- enable_irq(hwif->irq);
+
if (startstop == ide_stopped)
- hwgroup->busy = 0;
- }
-}
+ goto repeat;
+ } else
+ goto plug_device;
+out:
+ spin_unlock_irq(&hwgroup->lock);
+ spin_lock_irq(q->queue_lock);
+ return;
-/*
- * Passes the stuff to ide_do_request
- */
-void do_ide_request(struct request_queue *q)
-{
- ide_drive_t *drive = q->queuedata;
+plug_device:
+ spin_unlock_irq(&hwgroup->lock);
+ spin_lock_irq(q->queue_lock);
- ide_do_request(HWGROUP(drive), IDE_NO_IRQ);
+ if (!elv_queue_empty(q))
+ blk_plug_device(q);
}
/*
@@ -983,6 +863,17 @@ out:
return ret;
}
+static void ide_plug_device(ide_drive_t *drive)
+{
+ struct request_queue *q = drive->queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (!elv_queue_empty(q))
+ blk_plug_device(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
/**
* ide_timer_expiry - handle lack of an IDE interrupt
* @data: timer callback magic (hwgroup)
@@ -1000,10 +891,12 @@ out:
void ide_timer_expiry (unsigned long data)
{
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data;
+ ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
ide_expiry_t *expiry;
unsigned long flags;
unsigned long wait = -1;
+ int plug_device = 0;
spin_lock_irqsave(&hwgroup->lock, flags);
@@ -1015,22 +908,15 @@ void ide_timer_expiry (unsigned long data)
* or we were "sleeping" to give other devices a chance.
* Either way, we don't really want to complain about anything.
*/
- if (hwgroup->sleeping) {
- hwgroup->sleeping = 0;
- hwgroup->busy = 0;
- }
} else {
- ide_drive_t *drive = hwgroup->drive;
+ drive = hwgroup->drive;
if (!drive) {
printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
hwgroup->handler = NULL;
} else {
ide_hwif_t *hwif;
ide_startstop_t startstop = ide_stopped;
- if (!hwgroup->busy) {
- hwgroup->busy = 1; /* paranoia */
- printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name);
- }
+
if ((expiry = hwgroup->expiry) != NULL) {
/* continue */
if ((wait = expiry(drive)) > 0) {
@@ -1071,15 +957,18 @@ void ide_timer_expiry (unsigned long data)
ide_error(drive, "irq timeout",
hwif->tp_ops->read_status(hwif));
}
- drive->service_time = jiffies - drive->service_start;
spin_lock_irq(&hwgroup->lock);
enable_irq(hwif->irq);
- if (startstop == ide_stopped)
- hwgroup->busy = 0;
+ if (startstop == ide_stopped) {
+ ide_unlock_hwgroup(hwgroup);
+ plug_device = 1;
+ }
}
}
- ide_do_request(hwgroup, IDE_NO_IRQ);
spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+ if (plug_device)
+ ide_plug_device(drive);
}
/**
@@ -1173,10 +1062,11 @@ irqreturn_t ide_intr (int irq, void *dev_id)
unsigned long flags;
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
ide_hwif_t *hwif = hwgroup->hwif;
- ide_drive_t *drive;
+ ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
ide_startstop_t startstop;
irqreturn_t irq_ret = IRQ_NONE;
+ int plug_device = 0;
spin_lock_irqsave(&hwgroup->lock, flags);
@@ -1241,10 +1131,6 @@ irqreturn_t ide_intr (int irq, void *dev_id)
*/
goto out;
- if (!hwgroup->busy) {
- hwgroup->busy = 1; /* paranoia */
- printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
- }
hwgroup->handler = NULL;
hwgroup->req_gen++;
del_timer(&hwgroup->timer);
@@ -1267,20 +1153,22 @@ irqreturn_t ide_intr (int irq, void *dev_id)
* same irq as is currently being serviced here, and Linux
* won't allow another of the same (on any CPU) until we return.
*/
- drive->service_time = jiffies - drive->service_start;
if (startstop == ide_stopped) {
if (hwgroup->handler == NULL) { /* paranoia */
- hwgroup->busy = 0;
- ide_do_request(hwgroup, hwif->irq);
- } else {
- printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler "
- "on exit\n", drive->name);
- }
+ ide_unlock_hwgroup(hwgroup);
+ plug_device = 1;
+ } else
+ printk(KERN_ERR "%s: %s: huh? expected NULL handler "
+ "on exit\n", __func__, drive->name);
}
out_handled:
irq_ret = IRQ_HANDLED;
out:
spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+ if (plug_device)
+ ide_plug_device(drive);
+
return irq_ret;
}
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 28232c64c34..1be263eb9c0 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -95,8 +95,7 @@ static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
return -EPERM;
if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
- (drive->media != ide_tape ||
- (drive->dev_flags & IDE_DFLAG_SCSI)))
+ (drive->media != ide_tape))
return -EPERM;
if ((arg >> IDE_NICE_DSC_OVERLAP) & 1)
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
index 63d01c55f86..678454ac248 100644
--- a/drivers/ide/ide-park.c
+++ b/drivers/ide/ide-park.c
@@ -16,16 +16,19 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
spin_lock_irq(&hwgroup->lock);
if (drive->dev_flags & IDE_DFLAG_PARKED) {
int reset_timer = time_before(timeout, drive->sleep);
+ int start_queue = 0;
drive->sleep = timeout;
wake_up_all(&ide_park_wq);
- if (reset_timer && hwgroup->sleeping &&
- del_timer(&hwgroup->timer)) {
- hwgroup->sleeping = 0;
- hwgroup->busy = 0;
+ if (reset_timer && del_timer(&hwgroup->timer))
+ start_queue = 1;
+ spin_unlock_irq(&hwgroup->lock);
+
+ if (start_queue) {
+ spin_lock_irq(q->queue_lock);
blk_start_queueing(q);
+ spin_unlock_irq(q->queue_lock);
}
- spin_unlock_irq(&hwgroup->lock);
return;
}
spin_unlock_irq(&hwgroup->lock);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index a64ec259f3d..c5adb7b9c5b 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -101,6 +101,82 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
}
}
+static void ide_classify_ata_dev(ide_drive_t *drive)
+{
+ u16 *id = drive->id;
+ char *m = (char *)&id[ATA_ID_PROD];
+ int is_cfa = ata_id_is_cfa(id);
+
+ /* CF devices are *not* removable in Linux definition of the term */
+ if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+
+ drive->media = ide_disk;
+
+ if (!ata_id_has_unload(drive->id))
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+
+ printk(KERN_INFO "%s: %s, %s DISK drive\n", drive->name, m,
+ is_cfa ? "CFA" : "ATA");
+}
+
+static void ide_classify_atapi_dev(ide_drive_t *drive)
+{
+ u16 *id = drive->id;
+ char *m = (char *)&id[ATA_ID_PROD];
+ u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
+
+ printk(KERN_INFO "%s: %s, ATAPI ", drive->name, m);
+ switch (type) {
+ case ide_floppy:
+ if (!strstr(m, "CD-ROM")) {
+ if (!strstr(m, "oppy") &&
+ !strstr(m, "poyp") &&
+ !strstr(m, "ZIP"))
+ printk(KERN_CONT "cdrom or floppy?, assuming ");
+ if (drive->media != ide_cdrom) {
+ printk(KERN_CONT "FLOPPY");
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+ break;
+ }
+ }
+ /* Early cdrom models used zero */
+ type = ide_cdrom;
+ case ide_cdrom:
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+#ifdef CONFIG_PPC
+ /* kludge for Apple PowerBook internal zip */
+ if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
+ printk(KERN_CONT "FLOPPY");
+ type = ide_floppy;
+ break;
+ }
+#endif
+ printk(KERN_CONT "CD/DVD-ROM");
+ break;
+ case ide_tape:
+ printk(KERN_CONT "TAPE");
+ break;
+ case ide_optical:
+ printk(KERN_CONT "OPTICAL");
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
+ break;
+ default:
+ printk(KERN_CONT "UNKNOWN (type %d)", type);
+ break;
+ }
+
+ printk(KERN_CONT " drive\n");
+ drive->media = type;
+ /* an ATAPI device ignores DRDY */
+ drive->ready_stat = 0;
+ if (ata_id_cdb_intr(id))
+ drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
+ drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
+ /* we don't do head unloading on ATAPI devices */
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+}
+
/**
* do_identify - identify a drive
* @drive: drive to identify
@@ -117,7 +193,7 @@ static void do_identify(ide_drive_t *drive, u8 cmd)
u16 *id = drive->id;
char *m = (char *)&id[ATA_ID_PROD];
unsigned long flags;
- int bswap = 1, is_cfa;
+ int bswap = 1;
/* local CPU only; some systems need this */
local_irq_save(flags);
@@ -154,91 +230,23 @@ static void do_identify(ide_drive_t *drive, u8 cmd)
if (strstr(m, "E X A B Y T E N E S T"))
goto err_misc;
- printk(KERN_INFO "%s: %s, ", drive->name, m);
-
drive->dev_flags |= IDE_DFLAG_PRESENT;
drive->dev_flags &= ~IDE_DFLAG_DEAD;
/*
* Check for an ATAPI device
*/
- if (cmd == ATA_CMD_ID_ATAPI) {
- u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
-
- printk(KERN_CONT "ATAPI ");
- switch (type) {
- case ide_floppy:
- if (!strstr(m, "CD-ROM")) {
- if (!strstr(m, "oppy") &&
- !strstr(m, "poyp") &&
- !strstr(m, "ZIP"))
- printk(KERN_CONT "cdrom or floppy?, assuming ");
- if (drive->media != ide_cdrom) {
- printk(KERN_CONT "FLOPPY");
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
- break;
- }
- }
- /* Early cdrom models used zero */
- type = ide_cdrom;
- case ide_cdrom:
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-#ifdef CONFIG_PPC
- /* kludge for Apple PowerBook internal zip */
- if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
- printk(KERN_CONT "FLOPPY");
- type = ide_floppy;
- break;
- }
-#endif
- printk(KERN_CONT "CD/DVD-ROM");
- break;
- case ide_tape:
- printk(KERN_CONT "TAPE");
- break;
- case ide_optical:
- printk(KERN_CONT "OPTICAL");
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
- break;
- default:
- printk(KERN_CONT "UNKNOWN (type %d)", type);
- break;
- }
- printk(KERN_CONT " drive\n");
- drive->media = type;
- /* an ATAPI device ignores DRDY */
- drive->ready_stat = 0;
- if (ata_id_cdb_intr(id))
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
- drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
- /* we don't do head unloading on ATAPI devices */
- drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
- return;
- }
-
+ if (cmd == ATA_CMD_ID_ATAPI)
+ ide_classify_atapi_dev(drive);
+ else
/*
* Not an ATAPI device: looks like a "regular" hard disk
*/
-
- is_cfa = ata_id_is_cfa(id);
-
- /* CF devices are *not* removable in Linux definition of the term */
- if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
- drive->dev_flags |= IDE_DFLAG_REMOVABLE;
-
- drive->media = ide_disk;
-
- if (!ata_id_has_unload(drive->id))
- drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
-
- printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA");
-
+ ide_classify_ata_dev(drive);
return;
-
err_misc:
kfree(id);
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
- return;
}
/**
@@ -641,14 +649,9 @@ static int ide_register_port(ide_hwif_t *hwif)
/* register with global device tree */
dev_set_name(&hwif->gendev, hwif->name);
hwif->gendev.driver_data = hwif;
- if (hwif->gendev.parent == NULL) {
- if (hwif->dev)
- hwif->gendev.parent = hwif->dev;
- else
- /* Would like to do = &device_legacy */
- hwif->gendev.parent = NULL;
- }
+ hwif->gendev.parent = hwif->dev;
hwif->gendev.release = hwif_release_dev;
+
ret = device_register(&hwif->gendev);
if (ret < 0) {
printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
@@ -878,8 +881,7 @@ static int ide_init_queue(ide_drive_t *drive)
* do not.
*/
- q = blk_init_queue_node(do_ide_request, &hwif->hwgroup->lock,
- hwif_to_node(hwif));
+ q = blk_init_queue_node(do_ide_request, NULL, hwif_to_node(hwif));
if (!q)
return 1;
@@ -1139,8 +1141,6 @@ static struct kobject *ata_probe(dev_t dev, int *part, void *data)
if (drive->media == ide_disk)
request_module("ide-disk");
- if (drive->dev_flags & IDE_DFLAG_SCSI)
- request_module("ide-scsi");
if (drive->media == ide_cdrom || drive->media == ide_optical)
request_module("ide-cd");
if (drive->media == ide_tape)
@@ -1417,58 +1417,6 @@ static void ide_port_cable_detect(ide_hwif_t *hwif)
}
}
-static ssize_t store_delete_devices(struct device *portdev,
- struct device_attribute *attr,
- const char *buf, size_t n)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- if (strncmp(buf, "1", n))
- return -EINVAL;
-
- ide_port_unregister_devices(hwif);
-
- return n;
-};
-
-static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
-
-static ssize_t store_scan(struct device *portdev,
- struct device_attribute *attr,
- const char *buf, size_t n)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- if (strncmp(buf, "1", n))
- return -EINVAL;
-
- ide_port_unregister_devices(hwif);
- ide_port_scan(hwif);
-
- return n;
-};
-
-static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
-
-static struct device_attribute *ide_port_attrs[] = {
- &dev_attr_delete_devices,
- &dev_attr_scan,
- NULL
-};
-
-static int ide_sysfs_register_port(ide_hwif_t *hwif)
-{
- int i, uninitialized_var(rc);
-
- for (i = 0; ide_port_attrs[i]; i++) {
- rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
- if (rc)
- break;
- }
-
- return rc;
-}
-
static unsigned int ide_indexes;
/**
@@ -1655,9 +1603,6 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
if (hwif == NULL)
continue;
- if (hwif->chipset == ide_unknown)
- hwif->chipset = ide_generic;
-
if (hwif->present)
hwif_register_devices(hwif);
}
diff --git a/drivers/ide/ide-sysfs.c b/drivers/ide/ide-sysfs.c
new file mode 100644
index 00000000000..883ffacaf45
--- /dev/null
+++ b/drivers/ide/ide-sysfs.c
@@ -0,0 +1,125 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+
+char *ide_media_string(ide_drive_t *drive)
+{
+ switch (drive->media) {
+ case ide_disk:
+ return "disk";
+ case ide_cdrom:
+ return "cdrom";
+ case ide_tape:
+ return "tape";
+ case ide_floppy:
+ return "floppy";
+ case ide_optical:
+ return "optical";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static ssize_t media_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", ide_media_string(drive));
+}
+
+static ssize_t drivename_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", drive->name);
+}
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "ide:m-%s\n", ide_media_string(drive));
+}
+
+static ssize_t model_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
+}
+
+static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
+}
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
+}
+
+struct device_attribute ide_dev_attrs[] = {
+ __ATTR_RO(media),
+ __ATTR_RO(drivename),
+ __ATTR_RO(modalias),
+ __ATTR_RO(model),
+ __ATTR_RO(firmware),
+ __ATTR(serial, 0400, serial_show, NULL),
+ __ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
+ __ATTR_NULL
+};
+
+static ssize_t store_delete_devices(struct device *portdev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ if (strncmp(buf, "1", n))
+ return -EINVAL;
+
+ ide_port_unregister_devices(hwif);
+
+ return n;
+};
+
+static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
+
+static ssize_t store_scan(struct device *portdev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ if (strncmp(buf, "1", n))
+ return -EINVAL;
+
+ ide_port_unregister_devices(hwif);
+ ide_port_scan(hwif);
+
+ return n;
+};
+
+static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
+
+static struct device_attribute *ide_port_attrs[] = {
+ &dev_attr_delete_devices,
+ &dev_attr_scan,
+ NULL
+};
+
+int ide_sysfs_register_port(ide_hwif_t *hwif)
+{
+ int i, uninitialized_var(rc);
+
+ for (i = 0; ide_port_attrs[i]; i++) {
+ rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
+ if (rc)
+ break;
+ }
+
+ return rc;
+}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a2d470eb2b5..5d2aa22cd6e 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -694,7 +694,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive);
}
/* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index f0f09f702e9..46a2d4ca812 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -440,81 +440,13 @@ static int ide_bus_match(struct device *dev, struct device_driver *drv)
return 1;
}
-static char *media_string(ide_drive_t *drive)
-{
- switch (drive->media) {
- case ide_disk:
- return "disk";
- case ide_cdrom:
- return "cdrom";
- case ide_tape:
- return "tape";
- case ide_floppy:
- return "floppy";
- case ide_optical:
- return "optical";
- default:
- return "UNKNOWN";
- }
-}
-
-static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", media_string(drive));
-}
-
-static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", drive->name);
-}
-
-static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "ide:m-%s\n", media_string(drive));
-}
-
-static ssize_t model_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
-}
-
-static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
-}
-
-static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- ide_drive_t *drive = to_ide_device(dev);
- return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
-}
-
-static struct device_attribute ide_dev_attrs[] = {
- __ATTR_RO(media),
- __ATTR_RO(drivename),
- __ATTR_RO(modalias),
- __ATTR_RO(model),
- __ATTR_RO(firmware),
- __ATTR(serial, 0400, serial_show, NULL),
- __ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
- __ATTR_NULL
-};
-
static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
{
ide_drive_t *drive = to_ide_device(dev);
- add_uevent_var(env, "MEDIA=%s", media_string(drive));
+ add_uevent_var(env, "MEDIA=%s", ide_media_string(drive));
add_uevent_var(env, "DRIVENAME=%s", drive->name);
- add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
+ add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive));
return 0;
}
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index 13b63e7fa35..b4ef218072c 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -216,16 +216,17 @@ static const struct ide_tp_ops tx4938ide_tp_ops = {
#endif /* __BIG_ENDIAN */
static const struct ide_port_ops tx4938ide_port_ops = {
- .set_pio_mode = tx4938ide_set_pio_mode,
+ .set_pio_mode = tx4938ide_set_pio_mode,
};
static const struct ide_port_info tx4938ide_port_info __initdata = {
- .port_ops = &tx4938ide_port_ops,
+ .port_ops = &tx4938ide_port_ops,
#ifdef __BIG_ENDIAN
- .tp_ops = &tx4938ide_tp_ops,
+ .tp_ops = &tx4938ide_tp_ops,
#endif
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO5,
+ .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO5,
+ .chipset = ide_generic,
};
static int __init tx4938ide_probe(struct platform_device *pdev)
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 97cd9e0f66f..4a8c5a21bd4 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -623,33 +623,34 @@ static const struct ide_tp_ops tx4939ide_tp_ops = {
#endif /* __LITTLE_ENDIAN */
static const struct ide_port_ops tx4939ide_port_ops = {
- .set_pio_mode = tx4939ide_set_pio_mode,
- .set_dma_mode = tx4939ide_set_dma_mode,
- .clear_irq = tx4939ide_clear_irq,
- .cable_detect = tx4939ide_cable_detect,
+ .set_pio_mode = tx4939ide_set_pio_mode,
+ .set_dma_mode = tx4939ide_set_dma_mode,
+ .clear_irq = tx4939ide_clear_irq,
+ .cable_detect = tx4939ide_cable_detect,
};
static const struct ide_dma_ops tx4939ide_dma_ops = {
- .dma_host_set = tx4939ide_dma_host_set,
- .dma_setup = tx4939ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = tx4939ide_dma_end,
- .dma_test_irq = tx4939ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
+ .dma_host_set = tx4939ide_dma_host_set,
+ .dma_setup = tx4939ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = tx4939ide_dma_end,
+ .dma_test_irq = tx4939ide_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
};
static const struct ide_port_info tx4939ide_port_info __initdata = {
- .init_hwif = tx4939ide_init_hwif,
- .init_dma = tx4939ide_init_dma,
- .port_ops = &tx4939ide_port_ops,
- .dma_ops = &tx4939ide_dma_ops,
- .tp_ops = &tx4939ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
+ .init_hwif = tx4939ide_init_hwif,
+ .init_dma = tx4939ide_init_dma,
+ .port_ops = &tx4939ide_port_ops,
+ .dma_ops = &tx4939ide_dma_ops,
+ .tp_ops = &tx4939ide_tp_ops,
+ .host_flags = IDE_HFLAG_MMIO,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .chipset = ide_generic,
};
static int __init tx4939ide_probe(struct platform_device *pdev)
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-23 12:27:13 +0000