diff options
Diffstat (limited to 'drivers/ide/pci/alim15x3.c')
| -rw-r--r-- | drivers/ide/pci/alim15x3.c | 80 |
1 files changed, 53 insertions, 27 deletions
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 27525ec2e19..ba0fb92b041 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/alim15x3.c Version 0.21 2007/02/03 + * linux/drivers/ide/pci/alim15x3.c Version 0.25 Jun 9 2007 * * Copyright (C) 1998-2000 Michel Aubry, Maintainer * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer @@ -10,6 +10,7 @@ * Copyright (C) 2002 Alan Cox <alan@redhat.com> * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> * * (U)DMA capable version of ali 1533/1543(C), 1535(D) * @@ -36,6 +37,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> +#include <linux/dmi.h> #include <asm/io.h> @@ -506,7 +508,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c u8 tmpbyte; struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); - pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision); + m5229_revision = dev->revision; isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); @@ -583,6 +585,35 @@ out: return 0; } +/* + * Cable special cases + */ + +static struct dmi_system_id cable_dmi_table[] = { + { + .ident = "HP Pavilion N5430", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"), + }, + }, + { } +}; + +static int ali_cable_override(struct pci_dev *pdev) +{ + /* Fujitsu P2000 */ + if (pdev->subsystem_vendor == 0x10CF && + pdev->subsystem_device == 0x10AF) + return 1; + + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + + return 0; +} + /** * ata66_ali15x3 - check for UDMA 66 support * @hwif: IDE interface @@ -594,37 +625,31 @@ out: * FIXME: frobs bits that are not defined on newer ALi devicea */ -static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif) +static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; - unsigned int ata66 = 0; - u8 cable_80_pin[2] = { 0, 0 }; - unsigned long flags; - u8 tmpbyte; + u8 cbl = ATA_CBL_PATA40, tmpbyte; local_irq_save(flags); if (m5229_revision >= 0xC2) { /* - * Ultra66 cable detection (from Host View) - * m5229, 0x4a, bit0: primary, bit1: secondary 80 pin - */ - pci_read_config_byte(dev, 0x4a, &tmpbyte); - /* - * 0x4a, bit0 is 0 => primary channel - * has 80-pin (from host view) - */ - if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1; - /* - * 0x4a, bit1 is 0 => secondary channel - * has 80-pin (from host view) - */ - if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1; - /* - * Allow ata66 if cable of current channel has 80 pins + * m5229 80-pin cable detection (from Host View) + * + * 0x4a bit0 is 0 => primary channel has 80-pin + * 0x4a bit1 is 0 => secondary channel has 80-pin + * + * Certain laptops use short but suitable cables + * and don't implement the detect logic. */ - ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0]; + if (ali_cable_override(dev)) + cbl = ATA_CBL_PATA40_SHORT; + else { + pci_read_config_byte(dev, 0x4a, &tmpbyte); + if ((tmpbyte & (1 << hwif->channel)) == 0) + cbl = ATA_CBL_PATA80; + } } else { /* * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 @@ -657,7 +682,7 @@ static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif) local_irq_restore(flags); - return(ata66); + return cbl; } /** @@ -708,8 +733,9 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) hwif->dma_setup = &ali15x3_dma_setup; if (!noautodma) hwif->autodma = 1; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_ali15x3(hwif); + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_ali15x3(hwif); } hwif->drives[0].autodma = hwif->autodma; hwif->drives[1].autodma = hwif->autodma; |