diff options
Diffstat (limited to 'drivers/ide/ide-cd.h')
| -rw-r--r-- | drivers/ide/ide-cd.h | 62 |
1 files changed, 32 insertions, 30 deletions
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 9d88b1a7ffe..c19aa23255d 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -54,34 +54,34 @@ #define ATAPI_CAPABILITIES_PAGE_SIZE (8 + 20) #define ATAPI_CAPABILITIES_PAGE_PAD_SIZE 4 -/* Configuration flags. These describe the capabilities of the drive. - They generally do not change after initialization, unless we learn - more about the drive from stuff failing. */ -struct ide_cd_config_flags { - __u8 drq_interrupt : 1; /* Device sends an interrupt when ready - for a packet command. */ - __u8 no_doorlock : 1; /* Drive cannot lock the door. */ - __u8 no_eject : 1; /* Drive cannot eject the disc. */ - __u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */ - __u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */ - __u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */ - __u8 limit_nframes : 1; /* Drive does not provide data in - multiples of SECTOR_SIZE when more - than one interrupt is needed. */ - __u8 seeking : 1; /* Seeking in progress */ - __u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */ - byte max_speed; /* Max speed of the drive */ -}; - -/* State flags. These give information about the current state of the - drive, and will change during normal operation. */ -struct ide_cd_state_flags { - __u8 media_changed : 1; /* Driver has noticed a media change. */ - __u8 toc_valid : 1; /* Saved TOC information is current. */ - __u8 door_locked : 1; /* We think that the drive door is locked. */ - __u8 writing : 1; /* the drive is currently writing */ - __u8 reserved : 4; - byte current_speed; /* Current speed of the drive */ +enum { + /* Device sends an interrupt when ready for a packet command. */ + IDE_CD_FLAG_DRQ_INTERRUPT = (1 << 0), + /* Drive cannot lock the door. */ + IDE_CD_FLAG_NO_DOORLOCK = (1 << 1), + /* Drive cannot eject the disc. */ + IDE_CD_FLAG_NO_EJECT = (1 << 2), + /* Drive is a pre-1.2 NEC 260 drive. */ + IDE_CD_FLAG_NEC260 = (1 << 3), + /* TOC addresses are in BCD. */ + IDE_CD_FLAG_TOCADDR_AS_BCD = (1 << 4), + /* TOC track numbers are in BCD. */ + IDE_CD_FLAG_TOCTRACKS_AS_BCD = (1 << 5), + /* + * Drive does not provide data in multiples of SECTOR_SIZE + * when more than one interrupt is needed. + */ + IDE_CD_FLAG_LIMIT_NFRAMES = (1 << 6), + /* Seeking in progress. */ + IDE_CD_FLAG_SEEKING = (1 << 7), + /* Driver has noticed a media change. */ + IDE_CD_FLAG_MEDIA_CHANGED = (1 << 8), + /* Saved TOC information is current. */ + IDE_CD_FLAG_TOC_VALID = (1 << 9), + /* We think that the drive door is locked. */ + IDE_CD_FLAG_DOOR_LOCKED = (1 << 10), + /* SET_CD_SPEED command is unsupported. */ + IDE_CD_FLAG_NO_SPEED_SELECT = (1 << 11), }; /* Structure of a MSF cdrom address. */ @@ -153,8 +153,10 @@ struct cdrom_info { unsigned long last_block; unsigned long start_seek; - struct ide_cd_config_flags config_flags; - struct ide_cd_state_flags state_flags; + unsigned int cd_flags; + + u8 max_speed; /* Max speed of the drive. */ + u8 current_speed; /* Current speed of the drive. */ /* Per-device info needed by cdrom.c generic driver. */ struct cdrom_device_info devinfo; |