aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c2
-rw-r--r--drivers/i2c/algos/i2c-algo-sibyte.c2
-rw-r--r--drivers/i2c/busses/Kconfig15
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c6
-rw-r--r--drivers/i2c/busses/i2c-ali1563.c6
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c9
-rw-r--r--drivers/i2c/busses/i2c-amd756-s4882.c10
-rw-r--r--drivers/i2c/busses/i2c-amd756.c7
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c15
-rw-r--r--drivers/i2c/busses/i2c-elektor.c138
-rw-r--r--drivers/i2c/busses/i2c-i801.c60
-rw-r--r--drivers/i2c/busses/i2c-i810.c1
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c3
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c45
-rw-r--r--drivers/i2c/busses/i2c-isa.c2
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c33
-rw-r--r--drivers/i2c/busses/i2c-ixp4xx.c33
-rw-r--r--drivers/i2c/busses/i2c-keywest.c5
-rw-r--r--drivers/i2c/busses/i2c-mpc.c28
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c30
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c15
-rw-r--r--drivers/i2c/busses/i2c-parport.c11
-rw-r--r--drivers/i2c/busses/i2c-piix4.c12
-rw-r--r--drivers/i2c/busses/i2c-pmac-smu.c315
-rw-r--r--drivers/i2c/busses/i2c-prosavage.c9
-rw-r--r--drivers/i2c/busses/i2c-pxa.c26
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c80
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c9
-rw-r--r--drivers/i2c/busses/i2c-sis630.c8
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c7
-rw-r--r--drivers/i2c/busses/i2c-via.c6
-rw-r--r--drivers/i2c/busses/i2c-viapro.c279
-rw-r--r--drivers/i2c/busses/scx200_acb.c3
-rw-r--r--drivers/i2c/chips/Kconfig9
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/ds1337.c7
-rw-r--r--drivers/i2c/chips/ds1374.c7
-rw-r--r--drivers/i2c/chips/eeprom.c9
-rw-r--r--drivers/i2c/chips/isp1301_omap.c22
-rw-r--r--drivers/i2c/chips/m41t00.c4
-rw-r--r--drivers/i2c/chips/max6875.c6
-rw-r--r--drivers/i2c/chips/pca9539.c3
-rw-r--r--drivers/i2c/chips/pcf8574.c5
-rw-r--r--drivers/i2c/chips/pcf8591.c5
-rw-r--r--drivers/i2c/chips/rtc8564.c5
-rw-r--r--drivers/i2c/chips/tps65010.c3
-rw-r--r--drivers/i2c/chips/x1205.c698
-rw-r--r--drivers/i2c/i2c-core.c199
-rw-r--r--drivers/i2c/i2c-dev.c18
50 files changed, 1603 insertions, 629 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index beb10edfe9c..82946acab4c 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -34,7 +34,7 @@
#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
-static int i2c_debug=0;
+static int i2c_debug;
#define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val)
#define pca_inw(adap, reg) adap->read_byte(adap, reg)
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 8ed5ad12552..938848ae162 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -42,7 +42,7 @@
/* module parameters:
*/
-static int bit_scan=0; /* have a look at what's hanging 'round */
+static int bit_scan; /* have a look at what's hanging 'round */
static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8334496a7e0..4010fe92e72 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -135,11 +135,12 @@ config I2C_I810
help
If you say yes to this option, support will be included for the Intel
810/815 family of mainboard I2C interfaces. Specifically, the
- following versions of the chipset is supported:
+ following versions of the chipset are supported:
i810AA
i810AB
i810E
i815
+ i845G
This driver can also be built as a module. If so, the module
will be called i2c-i810.
@@ -245,6 +246,18 @@ config I2C_KEYWEST
This support is also available as a module. If so, the module
will be called i2c-keywest.
+config I2C_PMAC_SMU
+ tristate "Powermac SMU I2C interface"
+ depends on I2C && PMAC_SMU
+ help
+ This supports the use of the I2C interface in the SMU
+ chip on recent Apple machines like the iMac G5. It is used
+ among others by the thermal control driver for those machines.
+ Say Y if you have such a machine.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-pmac-smu.
+
config I2C_MPC
tristate "MPC107/824x/85xx/52xx"
depends on I2C && PPC32
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 980b3e98367..f1df00f66c6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o
+obj-$(CONFIG_I2C_PMAC_SMU) += i2c-pmac-smu.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f021acd2674..3eb47890db4 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -134,7 +134,7 @@
/* -> Read = 1 */
#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */
-
+static struct pci_driver ali1535_driver;
static unsigned short ali1535_smba;
static DECLARE_MUTEX(i2c_ali1535_sem);
@@ -162,7 +162,8 @@ static int ali1535_setup(struct pci_dev *dev)
goto exit;
}
- if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) {
+ if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+ ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
ali1535_smba);
goto exit;
@@ -480,7 +481,6 @@ static struct i2c_adapter ali1535_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id ali1535_ids[] = {
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 86947504aea..e6f63208fc4 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -60,6 +60,7 @@
#define HST_CNTL2_SIZEMASK 0x38
+static struct pci_driver ali1563_pci_driver;
static unsigned short ali1563_smba;
static int ali1563_transaction(struct i2c_adapter * a, int size)
@@ -350,7 +351,8 @@ static int __devinit ali1563_setup(struct pci_dev * dev)
dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
goto Err;
}
- if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) {
+ if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name)) {
dev_warn(&dev->dev,"Could not allocate I/O space");
goto Err;
}
@@ -406,7 +408,7 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = {
MODULE_DEVICE_TABLE (pci, ali1563_id_table);
static struct pci_driver ali1563_pci_driver = {
- .name = "ali1563_i2c",
+ .name = "ali1563_smbus",
.id_table = ali1563_id_table,
.probe = ali1563_probe,
.remove = __devexit_p(ali1563_remove),
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b3f50bff39a..7a5c0941dbc 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -125,12 +125,13 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the i2c controller");
-static unsigned short ali15x3_smba = 0;
+static struct pci_driver ali15x3_driver;
+static unsigned short ali15x3_smba;
static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
{
@@ -166,7 +167,8 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
if(force_addr)
ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
- if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) {
+ if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+ ali15x3_driver.name)) {
dev_err(&ALI15X3_dev->dev,
"ALI15X3_smb region 0x%x already in use!\n",
ali15x3_smba);
@@ -470,7 +472,6 @@ static struct i2c_adapter ali15x3_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id ali15x3_ids[] = {
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 4e553e8c5cb..56c7d987590 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -169,12 +169,12 @@ static int __init amd756_s4882_init(void)
init_MUTEX(&amd756_lock);
/* Define the 5 virtual adapters and algorithms structures */
- if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter),
+ if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
GFP_KERNEL))) {
error = -ENOMEM;
goto ERROR1;
}
- if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm),
+ if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm),
GFP_KERNEL))) {
error = -ENOMEM;
goto ERROR2;
@@ -245,10 +245,8 @@ static void __exit amd756_s4882_exit(void)
kfree(s4882_adapter);
s4882_adapter = NULL;
}
- if (s4882_algo) {
- kfree(s4882_algo);
- s4882_algo = NULL;
- }
+ kfree(s4882_algo);
+ s4882_algo = NULL;
/* Restore physical bus */
if (i2c_add_adapter(&amd756_smbus))
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6ad0603384b..1750dedaf4b 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -85,8 +85,8 @@
#define AMD756_PROCESS_CALL 0x04
#define AMD756_BLOCK_DATA 0x05
-
-static unsigned short amd756_ioport = 0;
+static struct pci_driver amd756_driver;
+static unsigned short amd756_ioport;
/*
SMBUS event = I/O 28-29 bit 11
@@ -303,7 +303,6 @@ struct i2c_adapter amd756_smbus = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
@@ -365,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev,
amd756_ioport += SMB_ADDR_OFFSET;
}
- if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
+ if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
amd756_ioport);
return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 45ea24ba14d..e5ef560e686 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -30,6 +30,8 @@ struct amd_smbus {
int size;
};
+static struct pci_driver amd8111_driver;
+
/*
* AMD PCI control registers definitions.
*/
@@ -242,7 +244,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- protocol |= pec;
len = min_t(u8, data->block[0], 31);
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
@@ -252,13 +253,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
read_write = I2C_SMBUS_READ;
break;
- case I2C_SMBUS_WORD_DATA_PEC:
- case I2C_SMBUS_BLOCK_DATA_PEC:
- case I2C_SMBUS_PROC_CALL_PEC:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
- return -1;
-
default:
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -343,16 +337,15 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_
if (~pci_resource_flags(dev, 0) & IORESOURCE_IO)
return -ENODEV;
- smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL);
+ smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
if (!smbus)
return -ENOMEM;
- memset(smbus, 0, sizeof(struct amd_smbus));
smbus->dev = dev;
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
- if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0"))
+ if (!request_region(smbus->base, smbus->size, amd8111_driver.name))
goto out_kfree;
smbus->adapter.owner = THIS_MODULE;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 6930b660e50..59f8308c235 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
for Alpha Processor Inc. UP-2000(+) boards */
#include <linux/kernel.h>
@@ -46,12 +46,14 @@
#define DEFAULT_BASE 0x330
static int base;
+static u8 __iomem *base_iomem;
+
static int irq;
static int clock = 0x1c;
static int own = 0x55;
static int mmapped;
-/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
+/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
this module in real supports only one device, due to missing arguments
in some functions, called from the algo-pcf module. Sometimes it's
need to be rewriten - but for now just remove this for simpler reading */
@@ -60,40 +62,33 @@ static wait_queue_head_t pcf_wait;
static int pcf_pending;
static spinlock_t lock;
+static struct i2c_adapter pcf_isa_ops;
+
/* ----- local functions ---------------------------------------------- */
static void pcf_isa_setbyte(void *data, int ctl, int val)
{
- int address = ctl ? (base + 1) : base;
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
/* enable irq if any specified for serial operation */
if (ctl && irq && (val & I2C_PCF_ESO)) {
val |= I2C_PCF_ENI;
}
- pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
-
- switch (mmapped) {
- case 0: /* regular I/O */
- outb(val, address);
- break;
- case 2: /* double mapped I/O needed for UP2000 board,
- I don't know why this... */
- writeb(val, (void *)address);
- /* fall */
- case 1: /* memory mapped I/O */
- writeb(val, (void *)address);
- break;
- }
+ pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val);
+ iowrite8(val, address);
+#ifdef __alpha__
+ /* API UP2000 needs some hardware fudging to make the write stick */
+ iowrite8(val, address);
+#endif
}
static int pcf_isa_getbyte(void *data, int ctl)
{
- int address = ctl ? (base + 1) : base;
- int val = mmapped ? readb((void *)address) : inb(address);
-
- pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+ int val = ioread8(address);
+ pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val);
return (val);
}
@@ -149,16 +144,40 @@ static int pcf_isa_init(void)
{
spin_lock_init(&lock);
if (!mmapped) {
- if (!request_region(base, 2, "i2c (isa bus adapter)")) {
- printk(KERN_ERR
- "i2c-elektor: requested I/O region (0x%X:2) "
- "is in use.\n", base);
+ if (!request_region(base, 2, pcf_isa_ops.name)) {
+ printk(KERN_ERR "%s: requested I/O region (%#x:2) is "
+ "in use\n", pcf_isa_ops.name, base);
+ return -ENODEV;
+ }
+ base_iomem = ioport_map(base, 2);
+ if (!base_iomem) {
+ printk(KERN_ERR "%s: remap of I/O region %#x failed\n",
+ pcf_isa_ops.name, base);
+ release_region(base, 2);
+ return -ENODEV;
+ }
+ } else {
+ if (!request_mem_region(base, 2, pcf_isa_ops.name)) {
+ printk(KERN_ERR "%s: requested memory region (%#x:2) "
+ "is in use\n", pcf_isa_ops.name, base);
+ return -ENODEV;
+ }
+ base_iomem = ioremap(base, 2);
+ if (base_iomem == NULL) {
+ printk(KERN_ERR "%s: remap of memory region %#x "
+ "failed\n", pcf_isa_ops.name, base);
+ release_mem_region(base, 2);
return -ENODEV;
}
}
+ pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base,
+ base_iomem);
+
if (irq > 0) {
- if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
- printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
+ if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name,
+ NULL) < 0) {
+ printk(KERN_ERR "%s: Request irq%d failed\n",
+ pcf_isa_ops.name, irq);
irq = 0;
} else
enable_irq(irq);
@@ -186,47 +205,49 @@ static struct i2c_adapter pcf_isa_ops = {
.class = I2C_CLASS_HWMON,
.id = I2C_HW_P_ELEK,
.algo_data = &pcf_isa_data,
- .name = "PCF8584 ISA adapter",
+ .name = "i2c-elektor",
};
-static int __init i2c_pcfisa_init(void)
+static int __init i2c_pcfisa_init(void)
{
#ifdef __alpha__
- /* check to see we have memory mapped PCF8584 connected to the
+ /* check to see we have memory mapped PCF8584 connected to the
Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
if (base == 0) {
struct pci_dev *cy693_dev;
-
- cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
+
+ cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
PCI_DEVICE_ID_CONTAQ_82C693, NULL);
if (cy693_dev) {
- char config;
+ unsigned char config;
/* yeap, we've found cypress, let's check config */
if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
-
- pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config);
+
+ pr_debug("%s: found cy82c693, config "
+ "register 0x47 = 0x%02x\n",
+ pcf_isa_ops.name, config);
/* UP2000 board has this register set to 0xe1,
- but the most significant bit as seems can be
+ but the most significant bit as seems can be
reset during the proper initialisation
- sequence if guys from API decides to do that
- (so, we can even enable Tsunami Pchip
- window for the upper 1 Gb) */
+ sequence if guys from API decides to do that
+ (so, we can even enable Tsunami Pchip
+ window for the upper 1 Gb) */
/* so just check for ROMCS at 0xe0000,
- ROMCS enabled for writes
+ ROMCS enabled for writes
and external XD Bus buffer in use. */
if ((config & 0x7f) == 0x61) {
/* seems to be UP2000 like board */
base = 0xe0000;
- /* I don't know why we need to
- write twice */
- mmapped = 2;
- /* UP2000 drives ISA with
+ mmapped = 1;
+ /* UP2000 drives ISA with
8.25 MHz (PCI/4) clock
(this can be read from cypress) */
clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
- printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n");
+ pr_info("%s: found API UP2000 like "
+ "board, will probe PCF8584 "
+ "later\n", pcf_isa_ops.name);
}
}
pci_dev_put(cy693_dev);
@@ -236,12 +257,11 @@ static int __init i2c_pcfisa_init(void)
/* sanity checks for mmapped I/O */
if (mmapped && base < 0xc8000) {
- printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
+ printk(KERN_ERR "%s: incorrect base address (%#x) specified "
+ "for mmapped I/O\n", pcf_isa_ops.name, base);
return -ENODEV;
}
- printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n");
-
if (base == 0) {
base = DEFAULT_BASE;
}
@@ -251,8 +271,8 @@ static int __init i2c_pcfisa_init(void)
return -ENODEV;
if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
goto fail;
-
- printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base);
+
+ dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base);
return 0;
@@ -262,8 +282,13 @@ static int __init i2c_pcfisa_init(void)
free_irq(irq, NULL);
}
- if (!mmapped)
- release_region(base , 2);
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
+ release_region(base, 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
return -ENODEV;
}
@@ -276,8 +301,13 @@ static void i2c_pcfisa_exit(void)
free_irq(irq, NULL);
}
- if (!mmapped)
- release_region(base , 2);
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
+ release_region(base, 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
}
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 709beab7660..ac3eafa8aac 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,10 +52,6 @@
#include <linux/i2c.h>
#include <asm/io.h>
-#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC
-#define HAVE_PEC
-#endif
-
/* I801 SMBus address offsets */
#define SMBHSTSTS (0 + i801_smba)
#define SMBHSTCNT (2 + i801_smba)
@@ -106,10 +102,11 @@ MODULE_PARM_DESC(force_addr,
"EXTREMELY DANGEROUS!");
static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data,
- char read_write, int command);
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command, int hwpec);
static unsigned short i801_smba;
+static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
@@ -143,7 +140,7 @@ static int i801_setup(struct pci_dev *dev)
}
}
- if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) {
+ if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
i801_smba);
error_return = -EBUSY;
@@ -252,7 +249,7 @@ static int i801_transaction(void)
/* All-inclusive block transaction function */
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command)
+ int command, int hwpec)
{
int i, len;
int smbcmd;
@@ -391,8 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
goto END;
}
-#ifdef HAVE_PEC
- if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
+ if (hwpec) {
/* wait for INTR bit as advised by Intel */
timeout = 0;
do {
@@ -406,7 +402,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
}
outb_p(temp, SMBHSTSTS);
}
-#endif
result = 0;
END:
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
@@ -421,14 +416,13 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
{
- int hwpec = 0;
+ int hwpec;
int block = 0;
int ret, xact = 0;
-#ifdef HAVE_PEC
- if(isich4)
- hwpec = (flags & I2C_CLIENT_PEC) != 0;
-#endif
+ hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+ && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
@@ -463,11 +457,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_I2C_BLOCK_DATA:
-#ifdef HAVE_PEC
- case I2C_SMBUS_BLOCK_DATA_PEC:
- if(hwpec && size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
-#endif
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
outb_p(command, SMBHSTCMD);
@@ -479,27 +468,18 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
return -1;
}
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(1, SMBAUXCTL); /* enable HW PEC */
- }
-#endif
+ if (hwpec)
+ outb_p(1, SMBAUXCTL); /* enable hardware PEC */
+
if(block)
- ret = i801_block_transaction(data, read_write, size);
+ ret = i801_block_transaction(data, read_write, size, hwpec);
else {
outb_p(xact | ENABLE_INT9, SMBHSTCNT);
ret = i801_transaction();
}
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(0, SMBAUXCTL);
- }
-#endif
+ if (hwpec)
+ outb_p(0, SMBAUXCTL); /* disable hardware PEC */
if(block)
return ret;
@@ -526,12 +506,7 @@ static u32 i801_func(struct i2c_adapter *adapter)
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
-#ifdef HAVE_PEC
- | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC |
- I2C_FUNC_SMBUS_HWPEC_CALC
- : 0)
-#endif
- ;
+ | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
}
static struct i2c_algorithm smbus_algorithm = {
@@ -543,7 +518,6 @@ static struct i2c_adapter i801_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id i801_ids[] = {
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index 0ff7016e062..748be30f2ba 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -32,6 +32,7 @@
i810AB 7123
i810E 7125
i815 1132
+ i845G 2562
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index a3ed9590f02..1a587253d71 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -672,13 +672,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){
printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
ocp->def->index);
- if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
+ if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
ocp->def->index);
return -ENOMEM;
}
- memset(dev, 0, sizeof(*dev));
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 7bd9102db70..1414851a17b 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -11,7 +11,7 @@
*
* Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
*
- * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
* Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
*
* Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
@@ -35,7 +35,7 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <asm/io.h>
@@ -43,7 +43,7 @@
#include "i2c-iop3xx.h"
/* global unit counter */
-static int i2c_id = 0;
+static int i2c_id;
static inline unsigned char
iic_cook_addr(struct i2c_msg *msg)
@@ -184,7 +184,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
do {
interrupted = wait_event_interruptible_timeout (
iop3xx_adap->waitq,
- (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
+ (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
1 * HZ;
);
if ((rc = iop3xx_i2c_error(sr)) < 0) {
@@ -405,10 +405,9 @@ static struct i2c_algorithm iop3xx_i2c_algo = {
};
static int
-iop3xx_i2c_remove(struct device *device)
+iop3xx_i2c_remove(struct platform_device *pdev)
{
- struct platform_device *pdev = to_platform_device(device);
- struct i2c_adapter *padapter = dev_get_drvdata(&pdev->dev);
+ struct i2c_adapter *padapter = platform_get_drvdata(pdev);
struct i2c_algo_iop3xx_data *adapter_data =
(struct i2c_algo_iop3xx_data *)padapter->algo_data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -426,33 +425,30 @@ iop3xx_i2c_remove(struct device *device)
kfree(adapter_data);
kfree(padapter);
- dev_set_drvdata(&pdev->dev, NULL);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
static int
-iop3xx_i2c_probe(struct device *dev)
+iop3xx_i2c_probe(struct platform_device *pdev)
{
- struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
int ret;
struct i2c_adapter *new_adapter;
struct i2c_algo_iop3xx_data *adapter_data;
- new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
if (!new_adapter) {
ret = -ENOMEM;
goto out;
}
- memset((void*)new_adapter, 0, sizeof(*new_adapter));
- adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
+ adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
if (!adapter_data) {
ret = -ENOMEM;
goto free_adapter;
}
- memset((void*)adapter_data, 0, sizeof(*adapter_data));
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -474,9 +470,10 @@ iop3xx_i2c_probe(struct device *dev)
goto release_region;
}
- res = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0,
+ ret = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0,
pdev->name, adapter_data);
- if (res) {
+
+ if (ret) {
ret = -EIO;
goto unmap;
}
@@ -500,7 +497,7 @@ iop3xx_i2c_probe(struct device *dev)
iop3xx_i2c_set_slave_addr(adapter_data);
iop3xx_i2c_enable(adapter_data);
- dev_set_drvdata(&pdev->dev, new_adapter);
+ platform_set_drvdata(pdev, new_adapter);
new_adapter->algo_data = adapter_data;
i2c_add_adapter(new_adapter);
@@ -524,23 +521,25 @@ out:
}
-static struct device_driver iop3xx_i2c_driver = {
- .name = "IOP3xx-I2C",
- .bus = &platform_bus_type,
+static struct platform_driver iop3xx_i2c_driver = {
.probe = iop3xx_i2c_probe,
- .remove = iop3xx_i2c_remove
+ .remove = iop3xx_i2c_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "IOP3xx-I2C",
+ },
};
static int __init
i2c_iop3xx_init (void)
{
- return driver_register(&iop3xx_i2c_driver);
+ return platform_driver_register(&iop3xx_i2c_driver);
}
static void __exit
i2c_iop3xx_exit (void)
{
- driver_unregister(&iop3xx_i2c_driver);
+ platform_driver_unregister(&iop3xx_i2c_driver);
return;
}
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index bdc6806dafa..03672c9ca40 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -38,6 +38,7 @@
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
static u32 isa_func(struct i2c_adapter *adapter);
@@ -92,6 +93,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver)
/* Add the driver to the list of i2c drivers in the driver core */
driver->driver.name = driver->name;
+ driver->driver.owner = driver->owner;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_isa_device_probe;
driver->driver.remove = i2c_isa_device_remove;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 1956af382cd..cd6f45d186a 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -28,7 +28,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
@@ -84,12 +84,11 @@ struct ixp2000_i2c_data {
struct i2c_algo_bit_data algo_data;
};
-static int ixp2000_i2c_remove(struct device *dev)
+static int ixp2000_i2c_remove(struct platform_device *plat_dev)
{
- struct platform_device *plat_dev = to_platform_device(dev);
- struct ixp2000_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev);
+ struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev);
- dev_set_drvdata(&plat_dev->dev, NULL);
+ platform_set_drvdata(plat_dev, NULL);
i2c_bit_del_bus(&drv_data->adapter);
@@ -98,17 +97,15 @@ static int ixp2000_i2c_remove(struct device *dev)
return 0;
}
-static int ixp2000_i2c_probe(struct device *dev)
+static int ixp2000_i2c_probe(struct platform_device *plat_dev)
{
int err;
- struct platform_device *plat_dev = to_platform_device(dev);
struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp2000_i2c_data *drv_data =
- kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
+ kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- memzero(drv_data, sizeof(*drv_data));
drv_data->gpio_pins = gpio;
drv_data->algo_data.data = gpio;
@@ -121,6 +118,8 @@ static int ixp2000_i2c_probe(struct device *dev)
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP2000,
+ strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
+ I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data,
drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -131,31 +130,33 @@ static int ixp2000_i2c_probe(struct device *dev)
gpio_line_set(gpio->sda_pin, 0);
if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
- dev_err(dev, "Could not install, error %d\n", err);
+ dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
kfree(drv_data);
return err;
}
- dev_set_drvdata(&plat_dev->dev, drv_data);
+ platform_set_drvdata(plat_dev, drv_data);
return 0;
}
-static struct device_driver ixp2000_i2c_driver = {
- .name = "IXP2000-I2C",
- .bus = &platform_bus_type,
+static struct platform_driver ixp2000_i2c_driver = {
.probe = ixp2000_i2c_probe,
.remove = ixp2000_i2c_remove,
+ .driver = {
+ .name = "IXP2000-I2C",
+ .owner = THIS_MODULE,
+ },
};
static int __init ixp2000_i2c_init(void)
{
- return driver_register(&ixp2000_i2c_driver);
+ return platform_driver_register(&ixp2000_i2c_driver);
}
static void __exit ixp2000_i2c_exit(void)
{
- driver_unregister(&ixp2000_i2c_driver);
+ platform_driver_unregister(&ixp2000_i2c_driver);
}
module_init(ixp2000_i2c_init);
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index f6f5ca31fdb..e422d8b2d4d 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -28,7 +28,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
@@ -85,12 +85,11 @@ struct ixp4xx_i2c_data {
struct i2c_algo_bit_data algo_data;
};
-static int ixp4xx_i2c_remove(struct device *dev)
+static int ixp4xx_i2c_remove(struct platform_device *plat_dev)
{
- struct platform_device *plat_dev = to_platform_device(dev);
- struct ixp4xx_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev);
+ struct ixp4xx_i2c_data *drv_data = platform_get_drvdata(plat_dev);
- dev_set_drvdata(&plat_dev->dev, NULL);
+ platform_set_drvdata(plat_dev, NULL);
i2c_bit_del_bus(&drv_data->adapter);
@@ -99,18 +98,16 @@ static int ixp4xx_i2c_remove(struct device *dev)
return 0;
}
-static int ixp4xx_i2c_probe(struct device *dev)
+static int ixp4xx_i2c_probe(struct platform_device *plat_dev)
{
int err;
- struct platform_device *plat_dev = to_platform_device(dev);
struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp4xx_i2c_data *drv_data =
- kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
+ kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
if(!drv_data)
return -ENOMEM;
- memzero(drv_data, sizeof(struct ixp4xx_i2c_data));
drv_data->gpio_pins = gpio;
/*
@@ -129,6 +126,8 @@ static int ixp4xx_i2c_probe(struct device *dev)
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP4XX;
+ strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
+ I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data;
drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -139,32 +138,34 @@ static int ixp4xx_i2c_probe(struct device *dev)
gpio_line_set(gpio->sda_pin, 0);
if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) {
- printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id);
+ printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id);
kfree(drv_data);
return err;
}
- dev_set_drvdata(&plat_dev->dev, drv_data);
+ platform_set_drvdata(plat_dev, drv_data);
return 0;
}
-static struct device_driver ixp4xx_i2c_driver = {
- .name = "IXP4XX-I2C",
- .bus = &platform_bus_type,
+static struct platform_driver ixp4xx_i2c_driver = {
.probe = ixp4xx_i2c_probe,
.remove = ixp4xx_i2c_remove,
+ .driver = {
+ .name = "IXP4XX-I2C",
+ .owner = THIS_MODULE,
+ },
};
static int __init ixp4xx_i2c_init(void)
{
- return driver_register(&ixp4xx_i2c_driver);
+ return platform_driver_register(&ixp4xx_i2c_driver);
}
static void __exit ixp4xx_i2c_exit(void)
{
- driver_unregister(&ixp4xx_i2c_driver);
+ platform_driver_unregister(&ixp4xx_i2c_driver);
}
module_init(ixp4xx_i2c_init);
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index eff5896ce86..d61f748278f 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -535,13 +535,12 @@ create_iface(struct device_node *np, struct device *dev)
tsize = sizeof(struct keywest_iface) +
(sizeof(struct keywest_chan) + 4) * nchan;
- iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL);
+ iface = kzalloc(tsize, GFP_KERNEL);
if (iface == NULL) {
printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
pmac_low_i2c_unlock(np);
return -ENOMEM;
}
- memset(iface, 0, tsize);
spin_lock_init(&iface->lock);
init_completion(&iface->complete);
iface->node = of_node_get(np);
@@ -716,6 +715,7 @@ static struct of_device_id i2c_keywest_match[] =
static struct macio_driver i2c_keywest_macio_driver =
{
+ .owner = THIS_MODULE,
.name = "i2c-keywest",
.match_table = i2c_keywest_match,
.probe = create_iface_macio,
@@ -724,6 +724,7 @@ static struct macio_driver i2c_keywest_macio_driver =
static struct of_platform_driver i2c_keywest_of_platform_driver =
{
+ .owner = THIS_MODULE,
.name = "i2c-keywest",
.match_table = i2c_keywest_match,
.probe = create_iface_of_platform,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f065583ddcf..5ccd338a9dc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -19,6 +19,8 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
+
#include <asm/io.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
@@ -286,20 +288,18 @@ static struct i2c_adapter mpc_ops = {
.retries = 1
};
-static int fsl_i2c_probe(struct device *device)
+static int fsl_i2c_probe(struct platform_device *pdev)
{
int result = 0;
struct mpc_i2c *i2c;
- struct platform_device *pdev = to_platform_device(device);
struct fsl_i2c_platform_data *pdata;
struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
- if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+ if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) {
return -ENOMEM;
}
- memset(i2c, 0, sizeof(*i2c));
i2c->irq = platform_get_irq(pdev, 0);
i2c->flags = pdata->device_flags;
@@ -322,7 +322,7 @@ static int fsl_i2c_probe(struct device *device)
}
mpc_i2c_setclock(i2c);
- dev_set_drvdata(device, i2c);
+ platform_set_drvdata(pdev, i2c);
i2c->adap = mpc_ops;
i2c_set_adapdata(&i2c->adap, i2c);
@@ -344,12 +344,12 @@ static int fsl_i2c_probe(struct device *device)
return result;
};
-static int fsl_i2c_remove(struct device *device)
+static int fsl_i2c_remove(struct platform_device *pdev)
{
- struct mpc_i2c *i2c = dev_get_drvdata(device);
+ struct mpc_i2c *i2c = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c->adap);
- dev_set_drvdata(device, NULL);
+ platform_set_drvdata(pdev, NULL);
if (i2c->irq != 0)
free_irq(i2c->irq, i2c);
@@ -360,21 +360,23 @@ static int fsl_i2c_remove(struct device *device)
};
/* Structure for a device driver */
-static struct device_driver fsl_i2c_driver = {
- .name = "fsl-i2c",
- .bus = &platform_bus_type,
+static struct platform_driver fsl_i2c_driver = {
.probe = fsl_i2c_probe,
.remove = fsl_i2c_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "fsl-i2c",
+ },
};
static int __init fsl_i2c_init(void)
{
- return driver_register(&fsl_i2c_driver);
+ return platform_driver_register(&fsl_i2c_driver);
}
static void __exit fsl_i2c_exit(void)
{
- driver_unregister(&fsl_i2c_driver);
+ platform_driver_unregister(&fsl_i2c_driver);
}
module_init(fsl_i2c_init);
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 99abca45fec..afd7634e5cc 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -17,6 +17,8 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
#include <asm/io.h>
/* Register defines */
@@ -490,23 +492,19 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
}
static int __devinit
-mv64xxx_i2c_probe(struct device *dev)
+mv64xxx_i2c_probe(struct platform_device *pd)
{
- struct platform_device *pd = to_platform_device(dev);
struct mv64xxx_i2c_data *drv_data;
- struct mv64xxx_i2c_pdata *pdata = dev->platform_data;
+ struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data;
int rc;
if ((pd->id != 0) || !pdata)
return -ENODEV;
- drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
-
+ drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data));
-
if (mv64xxx_i2c_map_regs(pd, drv_data)) {
rc = -ENODEV;
goto exit_kfree;
@@ -527,7 +525,7 @@ mv64xxx_i2c_probe(struct device *dev)
drv_data->adapter.class = I2C_CLASS_HWMON;
drv_data->adapter.timeout = pdata->timeout;
drv_data->adapter.retries = pdata->retries;
- dev_set_drvdata(dev, drv_data);
+ platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
@@ -556,9 +554,9 @@ mv64xxx_i2c_probe(struct device *dev)
}
static int __devexit
-mv64xxx_i2c_remove(struct device *dev)
+mv64xxx_i2c_remove(struct platform_device *dev)
{
- struct mv64xxx_i2c_data *drv_data = dev_get_drvdata(dev);
+ struct mv64xxx_i2c_data *drv_data = platform_get_drvdata(dev);
int rc;
rc = i2c_del_adapter(&drv_data->adapter);
@@ -569,23 +567,25 @@ mv64xxx_i2c_remove(struct device *dev)
return rc;
}
-static struct device_driver mv64xxx_i2c_driver = {
- .name = MV64XXX_I2C_CTLR_NAME,
- .bus = &platform_bus_type,
+static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
.remove = mv64xxx_i2c_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = MV64XXX_I2C_CTLR_NAME,
+ },
};
static int __init
mv64xxx_i2c_init(void)
{
- return driver_register(&mv64xxx_i2c_driver);
+ return platform_driver_register(&mv64xxx_i2c_driver);
}
static void __exit
mv64xxx_i2c_exit(void)
{
- driver_unregister(&mv64xxx_i2c_driver);
+ platform_driver_unregister(&mv64xxx_i2c_driver);
}
module_init(mv64xxx_i2c_init);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index fe9c0f42a2b..4d18e6e5f15 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -97,6 +97,7 @@ struct nforce2_smbus {
#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
#define NVIDIA_SMB_PRTCL_PEC 0x80
+static struct pci_driver nforce2_driver;
static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
@@ -113,7 +114,6 @@ static struct i2c_adapter nforce2_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
/* Return -1 on error. See smbus.h for more information */
@@ -188,13 +188,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
return -1;
- case I2C_SMBUS_WORD_DATA_PEC:
- case I2C_SMBUS_BLOCK_DATA_PEC:
- case I2C_SMBUS_PROC_CALL_PEC:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
- return -1;
-
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -285,7 +278,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
smbus->base = iobase & 0xfffc;
smbus->size = 8;
- if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+ if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
smbus->base, smbus->base+smbus->size-1, name);
return -1;
@@ -313,10 +306,8 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
int res1, res2;
/* we support 2 SMBus adapters */
- if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
- GFP_KERNEL)))
+ if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL)))
return -ENOMEM;
- memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
pci_set_drvdata(dev, smbuses);
/* SMBus adapter 1 */
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 71a2502fe06..2854d858fc9 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -155,12 +155,11 @@ static void i2c_parport_attach (struct parport *port)
{
struct i2c_par *adapter;
- adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL);
+ adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
if (adapter == NULL) {
- printk(KERN_ERR "i2c-parport: Failed to kmalloc\n");
+ printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
return;
}
- memset(adapter, 0x00, sizeof(struct i2c_par));
pr_debug("i2c-parport: attaching to %s\n", port->name);
adapter->pdev = parport_register_device(port, "i2c-parport",
@@ -232,7 +231,7 @@ static void i2c_parport_detach (struct parport *port)
}
}
-static struct parport_driver i2c_driver = {
+static struct parport_driver i2c_parport_driver = {
.name = "i2c-parport",
.attach = i2c_parport_attach,
.detach = i2c_parport_detach,
@@ -250,12 +249,12 @@ static int __init i2c_parport_init(void)
type = 0;
}
- return parport_register_driver(&i2c_driver);
+ return parport_register_driver(&i2c_parport_driver);
}
static void __exit i2c_parport_exit(void)
{
- parport_unregister_driver(&i2c_driver);
+ parport_unregister_driver(&i2c_parport_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 6d48a4da7be..692f4734548 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -90,13 +90,13 @@ struct sd {
/* If force is set to anything different from 0, we forcibly enable the
PIIX4. DANGEROUS! */
-static int force = 0;
+static int force;
module_param (force, int, 0);
MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
/* If force_addr is set to anything different from 0, we forcibly enable
the PIIX4 at the given address. VERY DANGEROUS! */
-static int force_addr = 0;
+static int force_addr;
module_param (force_addr, int, 0);
MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
@@ -104,14 +104,15 @@ MODULE_PARM_DESC(force_addr,
/* If fix_hstcfg is set to anything different from 0, we reset one of the
registers to be a valid value. */
-static int fix_hstcfg = 0;
+static int fix_hstcfg;
module_param (fix_hstcfg, int, 0);
MODULE_PARM_DESC(fix_hstcfg,
"Fix config register. Needed on some boards (Force CPCI735).");
static int piix4_transaction(void);
-static unsigned short piix4_smba = 0;
+static unsigned short piix4_smba;
+static struct pci_driver piix4_driver;
static struct i2c_adapter piix4_adapter;
static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
@@ -157,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
}
}
- if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+ if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
piix4_smba);
return -ENODEV;
@@ -407,7 +408,6 @@ static struct i2c_adapter piix4_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id piix4_ids[] = {
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
new file mode 100644
index 00000000000..bfefe7f7a53
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pmac-smu.c
@@ -0,0 +1,315 @@
+/*
+ i2c Support for Apple SMU Controller
+
+ Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+ <benh@kernel.crashing.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/smu.h>
+
+static int probe;
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's SMU");
+MODULE_LICENSE("GPL");
+module_param(probe, bool, 0);
+
+
+/* Physical interface */
+struct smu_iface
+{
+ struct i2c_adapter adapter;
+ struct completion complete;
+ u32 busid;
+};
+
+static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
+{
+ struct smu_iface *iface = misc;
+ complete(&iface->complete);
+}
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 smu_smbus_xfer( struct i2c_adapter* adap,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int size,
+ union i2c_smbus_data* data)
+{
+ struct smu_iface *iface = i2c_get_adapdata(adap);
+ struct smu_i2c_cmd cmd;
+ int rc = 0;
+ int read = (read_write == I2C_SMBUS_READ);
+
+ cmd.info.bus = iface->busid;
+ cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
+
+ /* Prepare datas & select mode */
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+ cmd.info.datalen = 0;
+ break;
+ case I2C_SMBUS_BYTE:
+ cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+ cmd.info.datalen = 1;
+ if (!read)
+ cmd.info.data[0] = data->byte;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = 1;
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ if (!read)
+ cmd.info.data[0] = data->byte;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = 2;
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ if (!read) {
+ cmd.info.data[0] = data->byte & 0xff;
+ cmd.info.data[1] = (data->byte >> 8) & 0xff;
+ }
+ break;
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = data->block[0] + 1;
+ if (cmd.info.datalen > 6)
+ return -EINVAL;
+ if (!read)
+ memcpy(cmd.info.data, data->block, cmd.info.datalen);
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = data->block[0];
+ if (cmd.info.datalen > 7)
+ return -EINVAL;
+ if (!read)
+ memcpy(cmd.info.data, &data->block[1],
+ cmd.info.datalen);
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Turn a standardsub read into a combined mode access */
+ if (read_write == I2C_SMBUS_READ &&
+ cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
+ cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
+
+ /* Finish filling command and submit it */
+ cmd.done = smu_i2c_done;
+ cmd.misc = iface;
+ rc = smu_queue_i2c(&cmd);
+ if (rc < 0)
+ return rc;
+ wait_for_completion(&iface->complete);
+ rc = cmd.status;
+
+ if (!read || rc < 0)
+ return rc;
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = cmd.info.data[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ data->word = ((u16)cmd.info.data[1]) << 8;
+ data->word |= cmd.info.data[0];
+ break;
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
+ break;
+ }
+
+ return rc;
+}
+
+static u32
+smu_smbus_func(struct i2c_adapter * adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm smu_algorithm = {
+ .smbus_xfer = smu_smbus_xfer,
+ .functionality = smu_smbus_func,
+};
+
+static int create_iface(struct device_node *np, struct device *dev)
+{
+ struct smu_iface* iface;
+ u32 *reg, busid;
+ int rc;
+
+ reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
+ return -ENXIO;
+ }
+ busid = *reg;
+
+ iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
+ if (iface == NULL) {
+ printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
+ return -ENOMEM;
+ }
+ init_completion(&iface->complete);
+ iface->busid = busid;
+
+ dev_set_drvdata(dev, iface);
+
+ sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
+ iface->adapter.algo = &smu_algorithm;
+ iface->adapter.algo_data = NULL;
+ iface->adapter.client_register = NULL;
+ iface->adapter.client_unregister = NULL;
+ i2c_set_adapdata(&iface->adapter, iface);
+ iface->adapter.dev.parent = dev;
+
+ rc = i2c_add_adapter(&iface->adapter);
+ if (rc) {
+ printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
+ "failed\n", iface->adapter.name);
+ i2c_set_adapdata(&iface->adapter, NULL);
+ }
+
+ if (probe) {
+ unsigned char addr;
+ printk("Probe: ");
+ for (addr = 0x00; addr <= 0x7f; addr++) {
+ if (i2c_smbus_xfer(&iface->adapter,addr,
+ 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+ printk("%02x ", addr);
+ }
+ printk("\n");
+ }
+
+ printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
+
+ return 0;
+}
+
+static int dispose_iface(struct device *dev)
+{
+ struct smu_iface *iface = dev_get_drvdata(dev);
+ int rc;
+
+ rc = i2c_del_adapter(&iface->adapter);
+ i2c_set_adapdata(&iface->adapter, NULL);
+ /* We aren't that prepared to deal with this... */
+ if (rc)
+ printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
+ iface->adapter.name);
+ dev_set_drvdata(dev, NULL);
+ kfree(iface);
+
+ return 0;
+}
+
+
+static int create_iface_of_platform(struct of_device* dev,
+ const struct of_device_id *match)
+{
+ return create_iface(dev->node, &dev->dev);
+}
+
+
+static int dispose_iface_of_platform(struct of_device* dev)
+{
+ return dispose_iface(&dev->dev);
+}
+
+
+static struct of_device_id i2c_smu_match[] =
+{
+ {
+ .compatible = "smu-i2c",
+ },
+ {},
+};
+static struct of_platform_driver i2c_smu_of_platform_driver =
+{
+ .name = "i2c-smu",
+ .match_table = i2c_smu_match,
+ .probe = create_iface_of_platform,
+ .remove = dispose_iface_of_platform
+};
+
+
+static int __init i2c_pmac_smu_init(void)
+{
+ of_register_driver(&i2c_smu_of_platform_driver);
+ return 0;
+}
+
+
+static void __exit i2c_pmac_smu_cleanup(void)
+{
+ of_unregister_driver(&i2c_smu_of_platform_driver);
+}
+
+module_init(i2c_pmac_smu_init);
+module_exit(i2c_pmac_smu_cleanup);
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 83fd16d61ce..9479525892e 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -83,11 +83,6 @@ struct s_i2c_chip {
/*
* i2c configuration
*/
-#ifndef I2C_HW_B_S3VIA
-#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
-#endif
-
-/* delays */
#define CYCLE_DELAY 10
#define TIMEOUT (HZ / 2)
@@ -241,14 +236,12 @@ static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_devic
struct s_i2c_chip *chip;
struct s_i2c_bus *bus;
- pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
+ pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
if (chip == NULL) {
return -ENOMEM;
}
- memset(chip, 0, sizeof(struct s_i2c_chip));
-
base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
len = dev->resource[0].end - base + 1;
chip->mmio = ioremap_nocache(base, len);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 44b595d90a4..70f7ab829d3 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -30,6 +30,7 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/i2c-pxa.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -935,10 +936,10 @@ static struct pxa_i2c i2c_pxa = {
},
};
-static int i2c_pxa_probe(struct device *dev)
+static int i2c_pxa_probe(struct platform_device *dev)
{
struct pxa_i2c *i2c = &i2c_pxa;
- struct i2c_pxa_platform_data *plat = dev->platform_data;
+ struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
int ret;
#ifdef CONFIG_PXA27x
@@ -967,7 +968,7 @@ static int i2c_pxa_probe(struct device *dev)
i2c_pxa_reset(i2c);
i2c->adap.algo_data = i2c;
- i2c->adap.dev.parent = dev;
+ i2c->adap.dev.parent = &dev->dev;
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
@@ -975,7 +976,7 @@ static int i2c_pxa_probe(struct device *dev)
goto err_irq;
}
- dev_set_drvdata(dev, i2c);
+ platform_set_drvdata(dev, i2c);
#ifdef CONFIG_I2C_PXA_SLAVE
printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n",
@@ -992,11 +993,11 @@ static int i2c_pxa_probe(struct device *dev)
return ret;
}
-static int i2c_pxa_remove(struct device *dev)
+static int i2c_pxa_remove(struct platform_device *dev)
{
- struct pxa_i2c *i2c = dev_get_drvdata(dev);
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
- dev_set_drvdata(dev, NULL);
+ platform_set_drvdata(dev, NULL);
i2c_del_adapter(&i2c->adap);
free_irq(IRQ_I2C, i2c);
@@ -1005,21 +1006,22 @@ static int i2c_pxa_remove(struct device *dev)
return 0;
}
-static struct device_driver i2c_pxa_driver = {
- .name = "pxa2xx-i2c",
- .bus = &platform_bus_type,
+static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
.remove = i2c_pxa_remove,
+ .driver = {
+ .name = "pxa2xx-i2c",
+ },
};
static int __init i2c_adap_pxa_init(void)
{
- return driver_register(&i2c_pxa_driver);
+ return platform_driver_register(&i2c_pxa_driver);
}
static void i2c_adap_pxa_exit(void)
{
- return driver_unregister(&i2c_pxa_driver);
+ return platform_driver_unregister(&i2c_pxa_driver);
}
module_init(i2c_adap_pxa_init);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 73a092fb0e7..58cfd3111ef 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -33,7 +33,7 @@
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -760,24 +760,23 @@ static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
* called by the bus driver when a suitable device is found
*/
-static int s3c24xx_i2c_probe(struct device *dev)
+static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
- struct platform_device *pdev = to_platform_device(dev);
struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
struct resource *res;
int ret;
/* find the clock and enable it */
- i2c->dev = dev;
- i2c->clk = clk_get(dev, "i2c");
+ i2c->dev = &pdev->dev;
+ i2c->clk = clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c->clk)) {
- dev_err(dev, "cannot get clock\n");
+ dev_err(&pdev->dev, "cannot get clock\n");
ret = -ENOENT;
goto out;
}
- dev_dbg(dev, "clock source %p\n", i2c->clk);
+ dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
clk_use(i2c->clk);
clk_enable(i2c->clk);
@@ -786,7 +785,7 @@ static int s3c24xx_i2c_probe(struct device *dev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
- dev_err(dev, "cannot find IO resource\n");
+ dev_err(&pdev->dev, "cannot find IO resource\n");
ret = -ENOENT;
goto out;
}
@@ -795,7 +794,7 @@ static int s3c24xx_i2c_probe(struct device *dev)
pdev->name);
if (i2c->ioarea == NULL) {
- dev_err(dev, "cannot request IO\n");
+ dev_err(&pdev->dev, "cannot request IO\n");
ret = -ENXIO;
goto out;
}
@@ -803,17 +802,17 @@ static int s3c24xx_i2c_probe(struct device *dev)
i2c->regs = ioremap(res->start, (res->end-res->start)+1);
if (i2c->regs == NULL) {
- dev_err(dev, "cannot map IO\n");
+ dev_err(&pdev->dev, "cannot map IO\n");
ret = -ENXIO;
goto out;
}
- dev_dbg(dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
+ dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
/* setup info block for the i2c core */
i2c->adap.algo_data = i2c;
- i2c->adap.dev.parent = dev;
+ i2c->adap.dev.parent = &pdev->dev;
/* initialise the i2c controller */
@@ -827,7 +826,7 @@ static int s3c24xx_i2c_probe(struct device *dev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res == NULL) {
- dev_err(dev, "cannot find IRQ\n");
+ dev_err(&pdev->dev, "cannot find IRQ\n");
ret = -ENOENT;
goto out;
}
@@ -836,23 +835,23 @@ static int s3c24xx_i2c_probe(struct device *dev)
pdev->name, i2c);
if (ret != 0) {
- dev_err(dev, "cannot claim IRQ\n");
+ dev_err(&pdev->dev, "cannot claim IRQ\n");
goto out;
}
i2c->irq = res;
- dev_dbg(dev, "irq resource %p (%ld)\n", res, res->start);
+ dev_dbg(&pdev->dev, "irq resource %p (%ld)\n", res, res->start);
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
- dev_err(dev, "failed to add bus to i2c core\n");
+ dev_err(&pdev->dev, "failed to add bus to i2c core\n");
goto out;
}
- dev_set_drvdata(dev, i2c);
+ platform_set_drvdata(pdev, i2c);
- dev_info(dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
+ dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id);
out:
if (ret < 0)
@@ -866,27 +865,25 @@ static int s3c24xx_i2c_probe(struct device *dev)
* called when device is removed from the bus
*/
-static int s3c24xx_i2c_remove(struct device *dev)
+static int s3c24xx_i2c_remove(struct platform_device *pdev)
{
- struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
+ struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
if (i2c != NULL) {
s3c24xx_i2c_free(i2c);
- dev_set_drvdata(dev, NULL);
+ platform_set_drvdata(pdev, NULL);
}
return 0;
}
#ifdef CONFIG_PM
-static int s3c24xx_i2c_resume(struct device *dev, u32 level)
+static int s3c24xx_i2c_resume(struct platform_device *dev)
{
- struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
-
- if (i2c != NULL && level == RESUME_ENABLE) {
- dev_dbg(dev, "resume: level %d\n", level);
+ struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+
+ if (i2c != NULL)
s3c24xx_i2c_init(i2c);
- }
return 0;
}
@@ -897,37 +894,44 @@ static int s3c24xx_i2c_resume(struct device *dev, u32 level)
/* device driver for platform bus bits */
-static struct device_driver s3c2410_i2c_driver = {
- .name = "s3c2410-i2c",
- .bus = &platform_bus_type,
+static struct platform_driver s3c2410_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.resume = s3c24xx_i2c_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c2410-i2c",
+ },
};
-static struct device_driver s3c2440_i2c_driver = {
- .name = "s3c2440-i2c",
- .bus = &platform_bus_type,
+static struct platform_driver s3c2440_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
.resume = s3c24xx_i2c_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c2440-i2c",
+ },
};
static int __init i2c_adap_s3c_init(void)
{
int ret;
- ret = driver_register(&s3c2410_i2c_driver);
- if (ret == 0)
- ret = driver_register(&s3c2440_i2c_driver);
+ ret = platform_driver_register(&s3c2410_i2c_driver);
+ if (ret == 0) {
+ ret = platform_driver_register(&s3c2440_i2c_driver);
+ if (ret)
+ platform_driver_unregister(&s3c2410_i2c_driver);
+ }
return ret;
}
static void __exit i2c_adap_s3c_exit(void)
{
- driver_unregister(&s3c2410_i2c_driver);
- driver_unregister(&s3c2440_i2c_driver);
+ platform_driver_unregister(&s3c2410_i2c_driver);
+ platform_driver_unregister(&s3c2440_i2c_driver);
}
module_init(i2c_adap_s3c_init);
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 080318d6f54..b57ab74d23e 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -123,11 +123,12 @@ static int blacklist[] = {
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
-static unsigned short sis5595_base = 0;
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
static u8 sis5595_read(u8 reg)
{
@@ -172,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
/* NB: We grab just the two SMBus registers here, but this may still
* interfere with ACPI :-( */
- if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) {
+ if (!request_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name)) {
dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
return -ENODEV;
@@ -364,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis5595_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .name = "unset",
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 86f0f448fa0..acb75e28241 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -92,6 +92,8 @@
#define SIS630_PCALL 0x04
#define SIS630_BLOCK_DATA 0x05
+static struct pci_driver sis630_driver;
+
/* insmod parameters */
static int high_clock;
static int force;
@@ -101,7 +103,7 @@ module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
/* acpi base address */
-static unsigned short acpi_base = 0;
+static unsigned short acpi_base;
/* supported chips */
static int supported[] = {
@@ -432,7 +434,8 @@ static int sis630_setup(struct pci_dev *sis630_dev)
dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) {
+ if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ sis630_driver.name)) {
dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
goto exit;
@@ -455,7 +458,6 @@ static struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .name = "unset",
.algo = &smbus_algorithm,
};
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index ead2ff3cf60..3024907cdaf 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -82,8 +82,9 @@
#define SIS96x_PROC_CALL 0x04
#define SIS96x_BLOCK_DATA 0x05
+static struct pci_driver sis96x_driver;
static struct i2c_adapter sis96x_adapter;
-static u16 sis96x_smbus_base = 0;
+static u16 sis96x_smbus_base;
static inline u8 sis96x_read(u8 reg)
{
@@ -257,7 +258,6 @@ static struct i2c_adapter sis96x_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id sis96x_ids[] = {
@@ -294,7 +294,8 @@ static int __devinit sis96x_probe(struct pci_dev *dev,
sis96x_smbus_base);
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) {
+ if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
+ sis96x_driver.name)) {
dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
"already in use!\n", sis96x_smbus_base,
sis96x_smbus_base + SMB_IOSIZE - 1);
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 040b8abeabb..484bbacfce6 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -43,9 +43,9 @@
/* io-region reservation */
#define IOSPACE 0x06
-#define IOTEXT "via-i2c"
-static u16 pm_io_base = 0;
+static struct pci_driver vt586b_driver;
+static u16 pm_io_base;
/*
It does not appear from the datasheet that the GPIO pins are
@@ -130,7 +130,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i
pci_read_config_word(dev, base, &pm_io_base);
pm_io_base &= (0xff << 8);
- if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) {
+ if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) {
dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE);
return -ENODEV;
}
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 99d209e0485..47e52bf2c5e 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -1,9 +1,10 @@
/*
i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
- Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -21,15 +22,19 @@
*/
/*
- Supports Via devices:
- 82C596A/B (0x3050)
- 82C596B (0x3051)
- 82C686A/B
- 8231
- 8233
- 8233A (0x3147 and 0x3177)
- 8235
- 8237
+ Supports the following VIA south bridges:
+
+ Chip name PCI ID REV I2C block
+ VT82C596A 0x3050 no
+ VT82C596B 0x3051 no
+ VT82C686A 0x3057 0x30 no
+ VT82C686B 0x3057 0x40 yes
+ VT8231 0x8235 no?
+ VT8233 0x3074 yes
+ VT8233A 0x3147 yes?
+ VT8235 0x3177 yes
+ VT8237R 0x3227 yes
+
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -38,7 +43,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
-#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -46,48 +50,37 @@
static struct pci_dev *vt596_pdev;
-#define SMBBA1 0x90
-#define SMBBA2 0x80
-#define SMBBA3 0xD0
+#define SMBBA1 0x90
+#define SMBBA2 0x80
+#define SMBBA3 0xD0
/* SMBus address offsets */
static unsigned short vt596_smba;
#define SMBHSTSTS (vt596_smba + 0)
-#define SMBHSLVSTS (vt596_smba + 1)
#define SMBHSTCNT (vt596_smba + 2)
#define SMBHSTCMD (vt596_smba + 3)
#define SMBHSTADD (vt596_smba + 4)
#define SMBHSTDAT0 (vt596_smba + 5)
#define SMBHSTDAT1 (vt596_smba + 6)
#define SMBBLKDAT (vt596_smba + 7)
-#define SMBSLVCNT (vt596_smba + 8)
-#define SMBSHDWCMD (vt596_smba + 9)
-#define SMBSLVEVT (vt596_smba + 0xA)
-#define SMBSLVDAT (vt596_smba + 0xC)
/* PCI Address Constants */
/* SMBus data in configuration space can be found in two places,
- We try to select the better one*/
-
-static unsigned short smb_cf_hstcfg = 0xD2;
+ We try to select the better one */
-#define SMBHSTCFG (smb_cf_hstcfg)
-#define SMBSLVC (smb_cf_hstcfg + 1)
-#define SMBSHDW1 (smb_cf_hstcfg + 2)
-#define SMBSHDW2 (smb_cf_hstcfg + 3)
-#define SMBREV (smb_cf_hstcfg + 4)
+static unsigned short SMBHSTCFG = 0xD2;
/* Other settings */
#define MAX_TIMEOUT 500
-#define ENABLE_INT9 0
/* VT82C596 constants */
-#define VT596_QUICK 0x00
-#define VT596_BYTE 0x04
-#define VT596_BYTE_DATA 0x08
-#define VT596_WORD_DATA 0x0C
-#define VT596_BLOCK_DATA 0x14
+#define VT596_QUICK 0x00
+#define VT596_BYTE 0x04
+#define VT596_BYTE_DATA 0x08
+#define VT596_WORD_DATA 0x0C
+#define VT596_BLOCK_DATA 0x14
+#define VT596_I2C_BLOCK_DATA 0x34
/* If force is set to anything different from 0, we forcibly enable the
@@ -105,40 +98,64 @@ MODULE_PARM_DESC(force_addr,
"EXTREMELY DANGEROUS!");
+static struct pci_driver vt596_driver;
static struct i2c_adapter vt596_adapter;
-/* Another internally used function */
-static int vt596_transaction(void)
+#define FEATURE_I2CBLOCK (1<<0)
+static unsigned int vt596_features;
+
+#ifdef DEBUG
+static void vt596_dump_regs(const char *msg, u8 size)
+{
+ dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
+ "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
+ inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+ inb_p(SMBHSTDAT1));
+
+ if (size == VT596_BLOCK_DATA
+ || size == VT596_I2C_BLOCK_DATA) {
+ int i;
+
+ dev_dbg(&vt596_adapter.dev, "BLK=");
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("\n");
+ dev_dbg(&vt596_adapter.dev, " ");
+ for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("%02x\n", inb_p(SMBBLKDAT));
+ }
+}
+#else
+static inline void vt596_dump_regs(const char *msg, u8 size) { }
+#endif
+
+/* Return -1 on error, 0 on success */
+static int vt596_transaction(u8 size)
{
int temp;
int result = 0;
int timeout = 0;
- dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
+ vt596_dump_regs("Transaction (pre)", size);
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
- "Resetting...\n", temp);
-
+ "Resetting...\n", temp);
+
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
-
+ dev_err(&vt596_adapter.dev, "SMBus reset failed! "
+ "(0x%02x)\n", temp);
return -1;
- } else {
- dev_dbg(&vt596_adapter.dev, "Successfull!\n");
}
}
- /* start the transaction by setting bit 6 */
- outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+ /* Start the transaction by setting bit 6 */
+ outb_p(0x40 | size, SMBHSTCNT);
- /* We will always wait for a fraction of a second!
- I don't know if VIA needs this, Intel did */
+ /* We will always wait for a fraction of a second */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
@@ -147,77 +164,63 @@ static int vt596_transaction(void)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+ dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
if (temp & 0x10) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+ dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+ size);
}
if (temp & 0x08) {
result = -1;
- dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
- "locked until next hard\nreset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ dev_err(&vt596_adapter.dev, "SMBus collision!\n");
}
if (temp & 0x04) {
+ int read = inb_p(SMBHSTADD) & 0x01;
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+ /* The quick and receive byte commands are used to probe
+ for chips, so errors are expected, and we don't want
+ to frighten the user. */
+ if (!((size == VT596_QUICK && !read) ||
+ (size == VT596_BYTE && read)))
+ dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+ /* Resetting status register */
+ if (temp & 0x1F)
outb_p(temp, SMBHSTSTS);
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_warn(&vt596_adapter.dev, "Failed reset at end "
- "of transaction (%02x)\n", temp);
- }
- }
- dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
+ vt596_dump_regs("Transaction (post)", size);
+
return result;
}
-/* Return -1 on error. */
+/* Return -1 on error, 0 on success */
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data)
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
{
- int i, len;
+ int i;
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_info(&vt596_adapter.dev,
- "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
size = VT596_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = VT596_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0);
size = VT596_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
@@ -225,28 +228,33 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
}
size = VT596_WORD_DATA;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (!(vt596_features & FEATURE_I2CBLOCK))
+ goto exit_unsupported;
+ if (read_write == I2C_SMBUS_READ)
+ outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+ /* Fall through */
case I2C_SMBUS_BLOCK_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 0)
- len = 0;
+ u8 len = data->block[0];
if (len > I2C_SMBUS_BLOCK_MAX)
len = I2C_SMBUS_BLOCK_MAX;
outb_p(len, SMBHSTDAT0);
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
outb_p(data->block[i], SMBBLKDAT);
}
- size = VT596_BLOCK_DATA;
+ size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
+ VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
break;
+ default:
+ goto exit_unsupported;
}
- outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+ outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
- if (vt596_transaction()) /* Error in transaction */
+ if (vt596_transaction(size)) /* Error in transaction */
return -1;
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
@@ -254,35 +262,39 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
switch (size) {
case VT596_BYTE:
- /* Where is the result put? I assume here it is in
- * SMBHSTDAT0 but it might just as well be in the
- * SMBHSTCMD. No clue in the docs
- */
- data->byte = inb_p(SMBHSTDAT0);
- break;
case VT596_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
break;
case VT596_WORD_DATA:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
break;
+ case VT596_I2C_BLOCK_DATA:
case VT596_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
break;
}
return 0;
+
+exit_unsupported:
+ dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+ size);
+ return -1;
}
static u32 vt596_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
+
+ if (vt596_features & FEATURE_I2CBLOCK)
+ func |= I2C_FUNC_SMBUS_I2C_BLOCK;
+ return func;
}
static struct i2c_algorithm smbus_algorithm = {
@@ -294,7 +306,6 @@ static struct i2c_adapter vt596_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static int __devinit vt596_probe(struct pci_dev *pdev,
@@ -302,7 +313,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
{
unsigned char temp;
int error = -ENODEV;
-
+
/* Determine the address of the SMBus areas */
if (force_addr) {
vt596_smba = force_addr & 0xfff0;
@@ -311,12 +322,12 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
}
if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
- !(vt596_smba & 0x1)) {
+ !(vt596_smba & 0x0001)) {
/* try 2nd address and config reg. for 596 */
if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
- (vt596_smba & 0x1)) {
- smb_cf_hstcfg = 0x84;
+ (vt596_smba & 0x0001)) {
+ SMBHSTCFG = 0x84;
} else {
/* no matches at all */
dev_err(&pdev->dev, "Cannot configure "
@@ -333,10 +344,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
return -ENODEV;
}
- found:
- if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+found:
+ if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
- vt596_smba);
+ vt596_smba);
return -ENODEV;
}
@@ -348,16 +359,16 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
pci_write_config_word(pdev, id->driver_data, vt596_smba);
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
- "address 0x%04x!\n", vt596_smba);
- } else if ((temp & 1) == 0) {
+ "address 0x%04x!\n", vt596_smba);
+ } else if (!(temp & 0x01)) {
if (force) {
- /* NOTE: This assumes I/O space and other allocations
- * WERE done by the Bios! Don't complain if your
- * hardware does weird things after enabling this.
- * :') Check for Bios updates before resorting to
+ /* NOTE: This assumes I/O space and other allocations
+ * WERE done by the Bios! Don't complain if your
+ * hardware does weird things after enabling this.
+ * :') Check for Bios updates before resorting to
* this.
*/
- pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_info(&pdev->dev, "Enabling SMBus device\n");
} else {
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
@@ -367,22 +378,28 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
}
}
- if ((temp & 0x0E) == 8)
- dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
- else if ((temp & 0x0E) == 0)
- dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
- "(or code out of date)!\n");
-
- pci_read_config_byte(pdev, SMBREV, &temp);
- dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8235:
+ case PCI_DEVICE_ID_VIA_8233A:
+ case PCI_DEVICE_ID_VIA_8233_0:
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ case PCI_DEVICE_ID_VIA_82C686_4:
+ /* The VT82C686B (rev 0x40) does support I2C block
+ transactions, but the VT82C686A (rev 0x30) doesn't */
+ if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
+ && temp >= 0x40)
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ }
+
vt596_adapter.dev.parent = &pdev->dev;
snprintf(vt596_adapter.name, I2C_NAME_SIZE,
- "SMBus Via Pro adapter at %04x", vt596_smba);
-
+ "SMBus Via Pro adapter at %04x", vt596_smba);
+
vt596_pdev = pci_dev_get(pdev);
if (i2c_add_adapter(&vt596_adapter)) {
pci_dev_put(vt596_pdev);
@@ -395,7 +412,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
*/
return -ENODEV;
- release_region:
+release_region:
release_region(vt596_smba, 8);
return error;
}
@@ -420,7 +437,7 @@ static struct pci_device_id vt596_ids[] = {
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, vt596_ids);
+MODULE_DEVICE_TABLE(pci, vt596_ids);
static struct pci_driver vt596_driver = {
.name = "vt596_smbus",
@@ -445,9 +462,9 @@ static void __exit i2c_vt596_exit(void)
}
}
-MODULE_AUTHOR(
- "Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
+ "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
+ "Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index a1d580e0536..d3478e08452 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -442,14 +442,13 @@ static int __init scx200_acb_create(int base, int index)
int rc = 0;
char description[64];
- iface = kmalloc(sizeof(*iface), GFP_KERNEL);
+ iface = kzalloc(sizeof(*iface), GFP_KERNEL);
if (!iface) {
printk(KERN_ERR NAME ": can't allocate memory\n");
rc = -ENOMEM;
goto errout;
}
- memset(iface, 0, sizeof(*iface));
adapter = &iface->adapter;
i2c_set_adapdata(adapter, iface);
snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 6bd44a44cd2..f9fae28f561 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,4 +126,13 @@ config SENSORS_MAX6875
This driver can also be built as a module. If so, the module
will be called max6875.
+config RTC_X1205_I2C
+ tristate "Xicor X1205 RTC chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Xicor X1205 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called x1205.
+
endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index a876dd42b86..46178b57b1f 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 9d3175c0339..02682fb794c 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -164,9 +164,9 @@ static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
buf[1] = BIN2BCD(dt->tm_sec);
buf[2] = BIN2BCD(dt->tm_min);
buf[3] = BIN2BCD(dt->tm_hour);
- buf[4] = BIN2BCD(dt->tm_wday) + 1;
+ buf[4] = BIN2BCD(dt->tm_wday + 1);
buf[5] = BIN2BCD(dt->tm_mday);
- buf[6] = BIN2BCD(dt->tm_mon) + 1;
+ buf[6] = BIN2BCD(dt->tm_mon + 1);
val = dt->tm_year;
if (val >= 100) {
val -= 100;
@@ -243,11 +243,10 @@ static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind)
I2C_FUNC_I2C))
goto exit;
- if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct ds1337_data));
INIT_LIST_HEAD(&data->list);
/* The common I2C client data is placed right before the
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 0936327a946..da488b735ab 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -167,7 +167,8 @@ static void ds1374_set_tlet(ulong arg)
static ulong new_time;
-DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
+static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet,
+ (ulong) & new_time);
int ds1374_set_rtc_time(ulong nowtime)
{
@@ -193,13 +194,11 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
struct i2c_client *client;
int rc;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- memset(client, 0, sizeof(struct i2c_client));
strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
- client->flags = I2C_DF_NOTIFY;
client->addr = addr;
client->adapter = adap;
client->driver = &ds1374_driver;
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index d58403a4790..4baf573fa04 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -88,8 +88,8 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice)
dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX)
- if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX)
+ for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX)
+ if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX)
goto exit;
} else {
if (i2c_smbus_write_byte(client, slice << 5)) {
@@ -155,7 +155,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter)
}
/* This function is called by i2c_probe */
-int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
+static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct eeprom_data *data;
@@ -171,11 +171,10 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
| I2C_FUNC_SMBUS_BYTE))
goto exit;
- if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct eeprom_data));
new_client = &data->client;
memset(data->data, 0xff, EEPROM_SIZE);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 8ee56d4b389..d2a100d7783 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -27,7 +27,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/usb_ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb.h>
@@ -873,25 +873,27 @@ static int otg_init(struct isp1301 *isp)
return 0;
}
-static int otg_probe(struct device *dev)
+static int otg_probe(struct platform_device *dev)
{
// struct omap_usb_config *config = dev->platform_data;
- otg_dev = to_platform_device(dev);
+ otg_dev = dev;
return 0;
}
-static int otg_remove(struct device *dev)
+static int otg_remove(struct platform_device *dev)
{
otg_dev = 0;
return 0;
}
-struct device_driver omap_otg_driver = {
- .name = "omap_otg",
- .bus = &platform_bus_type,
+struct platform_driver omap_otg_driver = {
.probe = otg_probe,
- .remove = otg_remove,
+ .remove = otg_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "omap_otg",
+ },
};
static int otg_bind(struct isp1301 *isp)
@@ -901,7 +903,7 @@ static int otg_bind(struct isp1301 *isp)
if (otg_dev)
return -EBUSY;
- status = driver_register(&omap_otg_driver);
+ status = platform_driver_register(&omap_otg_driver);
if (status < 0)
return status;
@@ -912,7 +914,7 @@ static int otg_bind(struct isp1301 *isp)
status = -ENODEV;
if (status < 0)
- driver_unregister(&omap_otg_driver);
+ platform_driver_unregister(&omap_otg_driver);
return status;
}
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 3f14528a52a..3df309ae44a 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -174,13 +174,11 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
struct i2c_client *client;
int rc;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- memset(client, 0, sizeof(struct i2c_client));
strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
- client->flags = I2C_DF_NOTIFY;
client->addr = addr;
client->adapter = adap;
client->driver = &m41t00_driver;
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 9e1aeb69abf..b376a006883 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -179,16 +179,14 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
if (address & 1)
return 0;
- if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL)))
+ if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM;
- memset(data, 0, sizeof(struct max6875_data));
/* A fake client is created on the odd address */
- if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+ if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_kfree1;
}
- memset(fake_client, 0, sizeof(struct i2c_client));
/* Init real i2c_client */
real_client = &data->client;
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 225577fdda4..59a93034622 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -122,11 +122,10 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pca9539_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 6525743ff9f..c323c2de236 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -115,7 +115,7 @@ static int pcf8574_attach_adapter(struct i2c_adapter *adapter)
}
/* This function is called by i2c_probe */
-int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct pcf8574_data *data;
@@ -127,11 +127,10 @@ int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pcf8574_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 80f1df9a450..ce420a67560 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -166,7 +166,7 @@ static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
}
/* This function is called by i2c_probe */
-int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct pcf8591_data *data;
@@ -178,11 +178,10 @@ int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pcf8591_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
index 0b5385c892b..916cdc1af23 100644
--- a/drivers/i2c/chips/rtc8564.c
+++ b/drivers/i2c/chips/rtc8564.c
@@ -148,17 +148,16 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind)
{addr, I2C_M_RD, 2, data}
};
- d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
+ d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto done;
}
- memset(d, 0, sizeof(struct rtc8564_data));
new_client = &d->client;
strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
i2c_set_clientdata(new_client, d);
- new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY;
+ new_client->flags = I2C_CLIENT_ALLOW_USE;
new_client->addr = addr;
new_client->adapter = adap;
new_client->driver = &rtc8564_driver;
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 280e9638c0f..280dd7a45db 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -500,11 +500,10 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
return 0;
}
- tps = kmalloc(sizeof *tps, GFP_KERNEL);
+ tps = kzalloc(sizeof *tps, GFP_KERNEL);
if (!tps)
return 0;
- memset(tps, 0, sizeof *tps);
init_MUTEX(&tps->lock);
INIT_WORK(&tps->work, tps65010_work, tps);
tps->irq = -1;
diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c
new file mode 100644
index 00000000000..7da366cdc18
--- /dev/null
+++ b/drivers/i2c/chips/x1205.c
@@ -0,0 +1,698 @@
+/*
+ * x1205.c - An i2c driver for the Xicor X1205 RTC
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * please send all reports to:
+ * kas11 at tampabay dot rr dot com
+ * a dot zummo at towertech dot it
+ *
+ * based on the other drivers in this same directory.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/list.h>
+
+#include <linux/x1205.h>
+
+#define DRV_VERSION "0.9.9"
+
+/* Addresses to scan: none. This chip is located at
+ * 0x6f and uses a two bytes register addressing.
+ * Two bytes need to be written to read a single register,
+ * while most other chips just require one and take the second
+ * one as the data to be written. To prevent corrupting
+ * unknown chips, the user must explicitely set the probe parameter.
+ */
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD;
+I2C_CLIENT_MODULE_PARM(hctosys,
+ "Set the system time from the hardware clock upon initialization");
+
+/* offsets into CCR area */
+
+#define CCR_SEC 0
+#define CCR_MIN 1
+#define CCR_HOUR 2
+#define CCR_MDAY 3
+#define CCR_MONTH 4
+#define CCR_YEAR 5
+#define CCR_WDAY 6
+#define CCR_Y2K 7
+
+#define X1205_REG_SR 0x3F /* status register */
+#define X1205_REG_Y2K 0x37
+#define X1205_REG_DW 0x36
+#define X1205_REG_YR 0x35
+#define X1205_REG_MO 0x34
+#define X1205_REG_DT 0x33
+#define X1205_REG_HR 0x32
+#define X1205_REG_MN 0x31
+#define X1205_REG_SC 0x30
+#define X1205_REG_DTR 0x13
+#define X1205_REG_ATR 0x12
+#define X1205_REG_INT 0x11
+#define X1205_REG_0 0x10
+#define X1205_REG_Y2K1 0x0F
+#define X1205_REG_DWA1 0x0E
+#define X1205_REG_YRA1 0x0D
+#define X1205_REG_MOA1 0x0C
+#define X1205_REG_DTA1 0x0B
+#define X1205_REG_HRA1 0x0A
+#define X1205_REG_MNA1 0x09
+#define X1205_REG_SCA1 0x08
+#define X1205_REG_Y2K0 0x07
+#define X1205_REG_DWA0 0x06
+#define X1205_REG_YRA0 0x05
+#define X1205_REG_MOA0 0x04
+#define X1205_REG_DTA0 0x03
+#define X1205_REG_HRA0 0x02
+#define X1205_REG_MNA0 0x01
+#define X1205_REG_SCA0 0x00
+
+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
+
+#define X1205_SR_RTCF 0x01 /* Clock failure */
+#define X1205_SR_WEL 0x02 /* Write Enable Latch */
+#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+
+#define X1205_DTR_DTR0 0x01
+#define X1205_DTR_DTR1 0x02
+#define X1205_DTR_DTR2 0x04
+
+#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+
+/* Prototypes */
+static int x1205_attach(struct i2c_adapter *adapter);
+static int x1205_detach(struct i2c_client *client);
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+ void *arg);
+
+static struct i2c_driver x1205_driver = {
+ .owner = THIS_MODULE,
+ .name = "x1205",
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = &x1205_attach,
+ .detach_client = &x1205_detach,
+};
+
+struct x1205_data {
+ struct i2c_client client;
+ struct list_head list;
+ unsigned int epoch;
+};
+
+static const unsigned char days_in_mo[] =
+ { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+static LIST_HEAD(x1205_clients);
+
+/* Workaround until the I2C subsytem will allow to send
+ * commands to a specific client. This function will send the command
+ * to the first client.
+ */
+int x1205_do_command(unsigned int cmd, void *arg)
+{
+ struct list_head *walk;
+ struct list_head *tmp;
+ struct x1205_data *data;
+
+ list_for_each_safe(walk, tmp, &x1205_clients) {
+ data = list_entry(walk, struct x1205_data, list);
+ return x1205_command(&data->client, cmd, arg);
+ }
+
+ return -ENODEV;
+}
+
+#define is_leap(year) \
+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+/* make sure the rtc_time values are in bounds */
+static int x1205_validate_tm(struct rtc_time *tm)
+{
+ int year = tm->tm_year + 1900;
+
+ if ((tm->tm_year < 70) || (tm->tm_year > 255))
+ return -EINVAL;
+
+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
+ return -EINVAL;
+
+ if (tm->tm_mday > days_in_mo[tm->tm_mon]
+ + ((tm->tm_mon == 1) && is_leap(year)))
+ return -EINVAL;
+
+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * In the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
+ u8 reg_base)
+{
+ unsigned char dt_addr[2] = { 0, reg_base };
+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
+
+ unsigned char buf[8], sr;
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &sr }, /* read status */
+ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 8, buf }, /* read date */
+ };
+
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ /* read status register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ /* check for battery failure */
+ if (sr & X1205_SR_RTCF) {
+ dev_warn(&client->dev,
+ "Clock had a power failure, you must set the date.\n");
+ return -EINVAL;
+ }
+
+ /* read date registers */
+ if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev,
+ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+ __FUNCTION__,
+ buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
+ data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
+ tm->tm_wday = buf[CCR_WDAY];
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+ int datetoo, u8 reg_base)
+{
+ int i, err, xfer;
+
+ unsigned char buf[8];
+
+ static const unsigned char wel[3] = { 0, X1205_REG_SR,
+ X1205_SR_WEL };
+
+ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
+ X1205_SR_WEL | X1205_SR_RWEL };
+
+ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
+
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ /* check if all values in the tm struct are correct */
+ if ((err = x1205_validate_tm(tm)) < 0)
+ return err;
+
+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
+
+ /* set hour and 24hr bit */
+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
+
+ /* should we also set the date? */
+ if (datetoo) {
+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+ /* month, 0 - 11 */
+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
+
+ /* year, since 1900 */
+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
+ buf[CCR_WDAY] = tm->tm_wday & 0x07;
+ buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
+ }
+
+ /* this sequence is required to unlock the chip */
+ xfer = i2c_master_send(client, wel, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ xfer = i2c_master_send(client, rwel, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ /* write register's data */
+ for (i = 0; i < (datetoo ? 8 : 3); i++) {
+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+
+ xfer = i2c_master_send(client, rdata, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: xfer=%d addr=%02x, data=%02x\n",
+ __FUNCTION__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+ };
+
+ /* disable further writes */
+ xfer = i2c_master_send(client, diswe, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
+{
+ unsigned char dtr;
+ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
+ };
+
+ /* read dtr register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+
+ *trim = 0;
+
+ if (dtr & X1205_DTR_DTR0)
+ *trim += 20;
+
+ if (dtr & X1205_DTR_DTR1)
+ *trim += 10;
+
+ if (dtr & X1205_DTR_DTR2)
+ *trim = -*trim;
+
+ return 0;
+}
+
+static int x1205_get_atrim(struct i2c_client *client, int *trim)
+{
+ s8 atr;
+ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
+ };
+
+ /* read atr register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+
+ /* atr is a two's complement value on 6 bits,
+ * perform sign extension. The formula is
+ * Catr = (atr * 0.25pF) + 11.00pF.
+ */
+ if (atr & 0x20)
+ atr |= 0xC0;
+
+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+
+ *trim = (atr * 250) + 11000;
+
+ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
+
+ return 0;
+}
+
+static int x1205_hctosys(struct i2c_client *client)
+{
+ int err;
+
+ struct rtc_time tm;
+ struct timespec tv;
+
+ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
+
+ if (err) {
+ dev_err(&client->dev,
+ "Unable to set the system clock\n");
+ return err;
+ }
+
+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+ * whether it stores the most close value or the value with partial
+ * seconds truncated. However, it is important that we use it to store
+ * the truncated value. This is because otherwise it is necessary,
+ * in an rtc sync function, to read both xtime.tv_sec and
+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+ * of >32bits is not possible. So storing the most close value would
+ * slow down the sync API. So here we have the truncated value and
+ * the best guess is to add 0.5s.
+ */
+
+ tv.tv_nsec = NSEC_PER_SEC >> 1;
+
+ /* WARNING: this is not the C library 'mktime' call, it is a built in
+ * inline function from include/linux/time.h. It expects (requires)
+ * the month to be in the range 1-12
+ */
+
+ tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour,
+ tm.tm_min, tm.tm_sec);
+
+ do_settimeofday(&tv);
+
+ dev_info(&client->dev,
+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
+ tm.tm_year + 1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour, tm.tm_min,
+ tm.tm_sec);
+
+ return 0;
+}
+
+struct x1205_limit
+{
+ unsigned char reg;
+ unsigned char mask;
+ unsigned char min;
+ unsigned char max;
+};
+
+static int x1205_validate_client(struct i2c_client *client)
+{
+ int i, xfer;
+
+ /* Probe array. We will read the register at the specified
+ * address and check if the given bits are zero.
+ */
+ static const unsigned char probe_zero_pattern[] = {
+ /* register, mask */
+ X1205_REG_SR, 0x18,
+ X1205_REG_DTR, 0xF8,
+ X1205_REG_ATR, 0xC0,
+ X1205_REG_INT, 0x18,
+ X1205_REG_0, 0xFF,
+ };
+
+ static const struct x1205_limit probe_limits_pattern[] = {
+ /* register, mask, min, max */
+ { X1205_REG_Y2K, 0xFF, 19, 20 },
+ { X1205_REG_DW, 0xFF, 0, 6 },
+ { X1205_REG_YR, 0xFF, 0, 99 },
+ { X1205_REG_MO, 0xFF, 0, 12 },
+ { X1205_REG_DT, 0xFF, 0, 31 },
+ { X1205_REG_HR, 0x7F, 0, 23 },
+ { X1205_REG_MN, 0xFF, 0, 59 },
+ { X1205_REG_SC, 0xFF, 0, 59 },
+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
+ };
+
+ /* check that registers have bits a 0 where expected */
+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
+ unsigned char buf;
+
+ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
+
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 2, addr },
+ { client->addr, I2C_M_RD, 1, &buf },
+ };
+
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+ if (xfer != 2) {
+ dev_err(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+ if ((buf & probe_zero_pattern[i+1]) != 0) {
+ dev_err(&client->adapter->dev,
+ "%s: register=%02x, zero pattern=%d, value=%x\n",
+ __FUNCTION__, addr[1], i, buf);
+
+ return -ENODEV;
+ }
+ }
+
+ /* check limits (only registers with bcd values) */
+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
+ unsigned char reg, value;
+
+ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
+
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 2, addr },
+ { client->addr, I2C_M_RD, 1, &reg },
+ };
+
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+
+ if (xfer != 2) {
+ dev_err(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
+
+ if (value > probe_limits_pattern[i].max ||
+ value < probe_limits_pattern[i].min) {
+ dev_dbg(&client->adapter->dev,
+ "%s: register=%x, lim pattern=%d, value=%d\n",
+ __FUNCTION__, addr[1], i, value);
+
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static int x1205_attach(struct i2c_adapter *adapter)
+{
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+ return i2c_probe(adapter, &addr_data, x1205_probe);
+}
+
+int x1205_direct_attach(int adapter_id,
+ struct i2c_client_address_data *address_data)
+{
+ int err;
+ struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
+
+ if (adapter) {
+ err = i2c_probe(adapter,
+ address_data, x1205_probe);
+
+ i2c_put_adapter(adapter);
+
+ return err;
+ }
+
+ return -ENODEV;
+}
+
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct x1205_data *data;
+
+ int err = 0;
+
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ /* Initialize our structures */
+ data->epoch = 2000;
+
+ client = &data->client;
+ client->addr = address;
+ client->driver = &x1205_driver;
+ client->adapter = adapter;
+
+ strlcpy(client->name, "x1205", I2C_NAME_SIZE);
+
+ i2c_set_clientdata(client, data);
+
+ /* Verify the chip is really an X1205 */
+ if (kind < 0) {
+ if (x1205_validate_client(client) < 0) {
+ err = -ENODEV;
+ goto exit_kfree;
+ }
+ }
+
+ /* Inform the i2c layer */
+ if ((err = i2c_attach_client(client)))
+ goto exit_kfree;
+
+ list_add(&data->list, &x1205_clients);
+
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ /* If requested, set the system time */
+ if (hctosys)
+ x1205_hctosys(client);
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+
+exit:
+ return err;
+}
+
+static int x1205_detach(struct i2c_client *client)
+{
+ int err;
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ list_del(&data->list);
+
+ kfree(data);
+
+ return 0;
+}
+
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+ void *param)
+{
+ if (param == NULL)
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
+
+ switch (cmd) {
+ case X1205_CMD_GETDATETIME:
+ return x1205_get_datetime(client, param, X1205_CCR_BASE);
+
+ case X1205_CMD_SETTIME:
+ return x1205_set_datetime(client, param, 0,
+ X1205_CCR_BASE);
+
+ case X1205_CMD_SETDATETIME:
+ return x1205_set_datetime(client, param, 1,
+ X1205_CCR_BASE);
+
+ case X1205_CMD_GETALARM:
+ return x1205_get_datetime(client, param, X1205_ALM0_BASE);
+
+ case X1205_CMD_SETALARM:
+ return x1205_set_datetime(client, param, 1,
+ X1205_ALM0_BASE);
+
+ case X1205_CMD_GETDTRIM:
+ return x1205_get_dtrim(client, param);
+
+ case X1205_CMD_GETATRIM:
+ return x1205_get_atrim(client, param);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int __init x1205_init(void)
+{
+ return i2c_add_driver(&x1205_driver);
+}
+
+static void __exit x1205_exit(void)
+{
+ i2c_del_driver(&x1205_driver);
+}
+
+MODULE_AUTHOR(
+ "Karen Spearel <kas11@tampabay.rr.com>, "
+ "Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+EXPORT_SYMBOL_GPL(x1205_do_command);
+EXPORT_SYMBOL_GPL(x1205_direct_attach);
+
+module_init(x1205_init);
+module_exit(x1205_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index dda472e5e8b..82ea1b7ec91 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -19,7 +19,8 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
- SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> */
+ SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ Jean Delvare <khali@linux-fr.org> */
#include <linux/module.h>
#include <linux/kernel.h>
@@ -29,6 +30,7 @@
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/seq_file.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
@@ -48,7 +50,7 @@ static int i2c_bus_suspend(struct device * dev, pm_message_t state)
int rc = 0;
if (dev->driver && dev->driver->suspend)
- rc = dev->driver->suspend(dev,state,0);
+ rc = dev->driver->suspend(dev, state);
return rc;
}
@@ -57,7 +59,7 @@ static int i2c_bus_resume(struct device * dev)
int rc = 0;
if (dev->driver && dev->driver->resume)
- rc = dev->driver->resume(dev,0);
+ rc = dev->driver->resume(dev);
return rc;
}
@@ -85,6 +87,7 @@ void i2c_adapter_dev_release(struct device *dev)
}
struct device_driver i2c_adapter_driver = {
+ .owner = THIS_MODULE,
.name = "i2c_adapter",
.bus = &i2c_bus_type,
.probe = i2c_device_probe,
@@ -98,6 +101,7 @@ static void i2c_adapter_class_dev_release(struct class_device *dev)
}
struct class i2c_adapter_class = {
+ .owner = THIS_MODULE,
.name = "i2c-adapter",
.release = &i2c_adapter_class_dev_release,
};
@@ -291,6 +295,7 @@ int i2c_add_driver(struct i2c_driver *driver)
down(&core_lists);
/* add the driver to the list of i2c drivers in the driver core */
+ driver->driver.owner = driver->owner;
driver->driver.name = driver->name;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_device_probe;
@@ -706,10 +711,6 @@ int i2c_probe(struct i2c_adapter *adapter,
int i, err;
int adap_id = i2c_adapter_id(adapter);
- /* Forget it if we can't probe using SMBUS_QUICK */
- if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
- return -1;
-
/* Force entries are done first, and are not affected by ignore
entries */
if (address_data->forces) {
@@ -736,6 +737,17 @@ int i2c_probe(struct i2c_adapter *adapter,
}
}
+ /* Stop here if we can't use SMBUS_QUICK */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+ if (address_data->probe[0] == I2C_CLIENT_END
+ && address_data->normal_i2c[0] == I2C_CLIENT_END)
+ return 0;
+
+ dev_warn(&adapter->dev, "SMBus Quick command not supported, "
+ "can't probe for chips\n");
+ return -1;
+ }
+
/* Probe entries are done second, and are not affected by ignore
entries either */
for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -820,101 +832,44 @@ crc8(u16 data)
return (u8)(data >> 8);
}
-/* CRC over count bytes in the first array plus the bytes in the rest
- array if it is non-null. rest[0] is the (length of rest) - 1
- and is included. */
-static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest)
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
{
int i;
for(i = 0; i < count; i++)
- crc = crc8((crc ^ first[i]) << 8);
- if(rest != NULL)
- for(i = 0; i <= rest[0]; i++)
- crc = crc8((crc ^ rest[i]) << 8);
+ crc = crc8((crc ^ p[i]) << 8);
return crc;
}
-static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest)
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
{
- return i2c_smbus_partial_pec(0, count, first, rest);
+ /* The address will be sent first */
+ u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD);
+ pec = i2c_smbus_pec(pec, &addr, 1);
+
+ /* The data buffer follows */
+ return i2c_smbus_pec(pec, msg->buf, msg->len);
}
-/* Returns new "size" (transaction type)
- Note that we convert byte to byte_data and byte_data to word_data
- rather than invent new xxx_PEC transactions. */
-static int i2c_smbus_add_pec(u16 addr, u8 command, int size,
- union i2c_smbus_data *data)
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
{
- u8 buf[3];
-
- buf[0] = addr << 1;
- buf[1] = command;
- switch(size) {
- case I2C_SMBUS_BYTE:
- data->byte = i2c_smbus_pec(2, buf, NULL);
- size = I2C_SMBUS_BYTE_DATA;
- break;
- case I2C_SMBUS_BYTE_DATA:
- buf[2] = data->byte;
- data->word = buf[2] ||
- (i2c_smbus_pec(3, buf, NULL) << 8);
- size = I2C_SMBUS_WORD_DATA;
- break;
- case I2C_SMBUS_WORD_DATA:
- /* unsupported */
- break;
- case I2C_SMBUS_BLOCK_DATA:
- data->block[data->block[0] + 1] =
- i2c_smbus_pec(2, buf, data->block);
- size = I2C_SMBUS_BLOCK_DATA_PEC;
- break;
- }
- return size;
+ msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+ msg->len++;
}
-static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
- union i2c_smbus_data *data)
+/* Return <0 on CRC error
+ If there was a write before this read (most cases) we need to take the
+ partial CRC from the write part into account.
+ Note that this function does modify the message (we need to decrease the
+ message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
{
- u8 buf[3], rpec, cpec;
+ u8 rpec = msg->buf[--msg->len];
+ cpec = i2c_smbus_msg_pec(cpec, msg);
- buf[1] = command;
- switch(size) {
- case I2C_SMBUS_BYTE_DATA:
- buf[0] = (addr << 1) | 1;
- cpec = i2c_smbus_pec(2, buf, NULL);
- rpec = data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- buf[0] = (addr << 1) | 1;
- buf[2] = data->word & 0xff;
- cpec = i2c_smbus_pec(3, buf, NULL);
- rpec = data->word >> 8;
- break;
- case I2C_SMBUS_WORD_DATA_PEC:
- /* unsupported */
- cpec = rpec = 0;
- break;
- case I2C_SMBUS_PROC_CALL_PEC:
- /* unsupported */
- cpec = rpec = 0;
- break;
- case I2C_SMBUS_BLOCK_DATA_PEC:
- buf[0] = (addr << 1);
- buf[2] = (addr << 1) | 1;
- cpec = i2c_smbus_pec(3, buf, data->block);
- rpec = data->block[data->block[0] + 1];
- break;
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- buf[0] = (addr << 1) | 1;
- rpec = i2c_smbus_partial_pec(partial, 1,
- buf, data->block);
- cpec = data->block[data->block[0] + 1];
- break;
- default:
- cpec = rpec = 0;
- break;
- }
if (rpec != cpec) {
pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
rpec, cpec);
@@ -941,9 +896,8 @@ s32 i2c_smbus_read_byte(struct i2c_client *client)
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
{
- union i2c_smbus_data data; /* only for PEC */
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
}
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
@@ -1026,13 +980,14 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
need to use only one message; when reading, we need two. We initialize
most things with sane defaults, to keep the code below somewhat
simpler. */
- unsigned char msgbuf0[34];
- unsigned char msgbuf1[34];
+ unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+ unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
+ u8 partial_pec = 0;
msgbuf0[0] = command;
switch(size) {
@@ -1075,7 +1030,6 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
msgbuf0[2] = (data->word >> 8) & 0xff;
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_DATA_PEC:
if (read_write == I2C_SMBUS_READ) {
dev_err(&adapter->dev, "Block read not supported "
"under I2C emulation!\n");
@@ -1088,23 +1042,20 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
data->block[0]);
return -1;
}
- if(size == I2C_SMBUS_BLOCK_DATA_PEC)
- (msg[0].len)++;
- for (i = 1; i <= msg[0].len; i++)
+ for (i = 1; i < msg[0].len; i++)
msgbuf0[i] = data->block[i-1];
}
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
dev_dbg(&adapter->dev, "Block process call not supported "
"under I2C emulation!\n");
return -1;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
- msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX;
+ msg[1].len = I2C_SMBUS_BLOCK_MAX;
} else {
msg[0].len = data->block[0] + 1;
- if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) {
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with "
"invalid block write size (%d)\n",
data->block[0]);
@@ -1120,9 +1071,30 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
return -1;
}
+ i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA);
+ if (i) {
+ /* Compute PEC if first message is a write */
+ if (!(msg[0].flags & I2C_M_RD)) {
+ if (num == 1) /* Write only */
+ i2c_smbus_add_pec(&msg[0]);
+ else /* Write followed by read */
+ partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+ }
+ /* Ask for PEC if last message is a read */
+ if (msg[num-1].flags & I2C_M_RD)
+ msg[num-1].len++;
+ }
+
if (i2c_transfer(adapter, msg, num) < 0)
return -1;
+ /* Check PEC if last message is a read */
+ if (i && (msg[num-1].flags & I2C_M_RD)) {
+ if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0)
+ return -1;
+ }
+
if (read_write == I2C_SMBUS_READ)
switch(size) {
case I2C_SMBUS_BYTE:
@@ -1137,8 +1109,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
/* fixed at 32 for now */
- data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX;
- for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
data->block[i+1] = msgbuf1[i];
break;
}
@@ -1151,28 +1123,8 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
union i2c_smbus_data * data)
{
s32 res;
- int swpec = 0;
- u8 partial = 0;
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
- if((flags & I2C_CLIENT_PEC) &&
- !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) {
- swpec = 1;
- if(read_write == I2C_SMBUS_READ &&
- size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
- else if(size == I2C_SMBUS_PROC_CALL)
- size = I2C_SMBUS_PROC_CALL_PEC;
- else if(size == I2C_SMBUS_BLOCK_PROC_CALL) {
- i2c_smbus_add_pec(addr, command,
- I2C_SMBUS_BLOCK_DATA, data);
- partial = data->block[data->block[0] + 1];
- size = I2C_SMBUS_BLOCK_PROC_CALL_PEC;
- } else if(read_write == I2C_SMBUS_WRITE &&
- size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- size = i2c_smbus_add_pec(addr, command, size, data);
- }
if (adapter->algo->smbus_xfer) {
down(&adapter->bus_lock);
@@ -1183,13 +1135,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command,size,data);
- if(res >= 0 && swpec &&
- size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA &&
- (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC ||
- size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) {
- if(i2c_smbus_check_pec(addr, command, size, partial, data))
- return -1;
- }
return res;
}
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index aa7a4fadef6..8af0bd1424d 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -26,18 +26,15 @@
/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
-/* The devfs code is contributed by Philipp Matthias Hahn
- <pmhahn@titan.lahn.de> */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
static struct i2c_client i2cdev_client_template;
@@ -80,10 +77,9 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
{
struct i2c_dev *i2c_dev;
- i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL);
+ i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev)
return ERR_PTR(-ENOMEM);
- memset(i2c_dev, 0x00, sizeof(*i2c_dev));
spin_lock(&i2c_dev_array_lock);
if (i2c_dev_array[adap->nr]) {
@@ -177,8 +173,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file,
int i,datasize,res;
unsigned long funcs;
- dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n",
- iminor(inode),cmd, arg);
+ dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
+ cmd, arg);
switch ( cmd ) {
case I2C_SLAVE:
@@ -432,8 +428,6 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap)
if (IS_ERR(i2c_dev))
return PTR_ERR(i2c_dev);
- devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor),
- S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor);
pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
adap->name, i2c_dev->minor);
@@ -466,7 +460,6 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap)
return -ENODEV;
init_completion(&i2c_dev->released);
- devfs_remove("i2c/%d", i2c_dev->minor);
return_i2c_dev(i2c_dev);
class_device_unregister(&i2c_dev->class_dev);
wait_for_completion(&i2c_dev->released);
@@ -522,8 +515,6 @@ static int __init i2c_dev_init(void)
if (res)
goto out_unreg_class;
- devfs_mk_dir("i2c");
-
return 0;
out_unreg_class:
@@ -539,7 +530,6 @@ static void __exit i2c_dev_exit(void)
{
i2c_del_driver(&i2cdev_driver);
class_unregister(&i2c_dev_class);
- devfs_remove("i2c");
unregister_chrdev(I2C_MAJOR,"i2c");
}