aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Makefile1
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-i801.c11
-rw-r--r--drivers/i2c/busses/i2c-mxs.c186
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c9
-rw-r--r--drivers/i2c/busses/i2c-tegra.c2
-rw-r--r--drivers/i2c/i2c-stub.c (renamed from drivers/i2c/busses/i2c-stub.c)66
-rw-r--r--drivers/i2c/muxes/i2c-mux-pinctrl.c2
9 files changed, 63 insertions, 216 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index beee6b2d361..1722f50f247 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
+obj-$(CONFIG_I2C_STUB) += i2c-stub.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core.o := -Wno-deprecated-declarations
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 65dd599a026..e9df4612b7e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -81,7 +81,6 @@ config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
- select GPIOLIB if I2C_MUX
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 2d33d62952c..395b516ffa0 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -85,7 +85,6 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
-obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 37793156bd9..6abc00d5988 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -82,7 +82,8 @@
#include <linux/wait.h>
#include <linux/err.h>
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
@@ -192,7 +193,8 @@ struct i801_priv {
int len;
u8 *data;
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
@@ -921,7 +923,8 @@ static void __init input_apanel_init(void) {}
static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
@@ -1059,7 +1062,7 @@ static unsigned int __devinit i801_get_adapter_class(struct i801_priv *priv)
id = dmi_first_match(mux_dmi_table);
if (id) {
- /* Remove from branch classes from trunk */
+ /* Remove branch classes from trunk */
mux_config = id->driver_data;
for (i = 0; i < mux_config->n_values; i++)
class &= ~mux_config->classes[i];
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 1f58197062c..286ca191782 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -1,7 +1,7 @@
/*
* Freescale MXS I2C bus driver
*
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
*
* based on a (non-working) driver which was:
*
@@ -35,10 +35,6 @@
#define DRIVER_NAME "mxs-i2c"
-static bool use_pioqueue;
-module_param(use_pioqueue, bool, 0);
-MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
-
#define MXS_I2C_CTRL0 (0x00)
#define MXS_I2C_CTRL0_SET (0x04)
@@ -75,23 +71,6 @@ MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
MXS_I2C_CTRL1_SLAVE_IRQ)
-#define MXS_I2C_QUEUECTRL (0x60)
-#define MXS_I2C_QUEUECTRL_SET (0x64)
-#define MXS_I2C_QUEUECTRL_CLR (0x68)
-
-#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20
-#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04
-
-#define MXS_I2C_QUEUESTAT (0x70)
-#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
-#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
-
-#define MXS_I2C_QUEUECMD (0x80)
-
-#define MXS_I2C_QUEUEDATA (0x90)
-
-#define MXS_I2C_DATA (0xa0)
-
#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \
MXS_I2C_CTRL0_PRE_SEND_START | \
@@ -153,7 +132,6 @@ struct mxs_i2c_dev {
const struct mxs_i2c_speed_config *speed;
/* DMA support components */
- bool dma_mode;
int dma_channel;
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
@@ -172,99 +150,6 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
- if (i2c->dma_mode)
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
- else
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
-}
-
-static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
- int flags)
-{
- u32 data;
-
- writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD);
-
- data = (addr << 1) | I2C_SMBUS_READ;
- writel(data, i2c->regs + MXS_I2C_DATA);
-
- data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-}
-
-static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
- u8 addr, u8 *buf, int len, int flags)
-{
- u32 data;
- int i, shifts_left;
-
- data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-
- /*
- * We have to copy the slave address (u8) and buffer (arbitrary number
- * of u8) into the data register (u32). To achieve that, the u8 are put
- * into the MSBs of 'data' which is then shifted for the next u8. When
- * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
- * looks like this:
- *
- * 3 2 1 0
- * 10987654|32109876|54321098|76543210
- * --------+--------+--------+--------
- * buffer+2|buffer+1|buffer+0|slave_addr
- */
-
- data = ((addr << 1) | I2C_SMBUS_WRITE) << 24;
-
- for (i = 0; i < len; i++) {
- data >>= 8;
- data |= buf[i] << 24;
- if ((i & 3) == 2)
- writel(data, i2c->regs + MXS_I2C_DATA);
- }
-
- /* Write out the remaining bytes if any */
- shifts_left = 24 - (i & 3) * 8;
- if (shifts_left)
- writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA);
-}
-
-/*
- * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the
- * rd_threshold to 1). Couldn't get this to work, though.
- */
-static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-
- while (readl(i2c->regs + MXS_I2C_QUEUESTAT)
- & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cond_resched();
- }
-
- return 0;
-}
-
-static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
-{
- u32 uninitialized_var(data);
- int i;
-
- for (i = 0; i < len; i++) {
- if ((i & 3) == 0) {
- if (mxs_i2c_wait_for_data(i2c))
- return -ETIMEDOUT;
- data = readl(i2c->regs + MXS_I2C_QUEUEDATA);
- }
- buf[i] = data & 0xff;
- data >>= 8;
- }
-
- return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@@ -432,39 +317,17 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
init_completion(&i2c->cmd_complete);
i2c->cmd_err = 0;
- if (i2c->dma_mode) {
- ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
- if (ret)
- return ret;
- } else {
- if (msg->flags & I2C_M_RD) {
- mxs_i2c_pioq_setup_read(i2c, msg->addr,
- msg->len, flags);
- } else {
- mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf,
- msg->len, flags);
- }
-
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
- }
+ ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
+ if (ret)
+ return ret;
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
if (ret == 0)
goto timeout;
- if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) {
- ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
- if (ret)
- goto timeout;
- }
-
if (i2c->cmd_err == -ENXIO)
mxs_i2c_reset(i2c);
- else
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
@@ -472,8 +335,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
- if (i2c->dma_mode)
- mxs_i2c_dma_finish(i2c);
+ mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
return -ETIMEDOUT;
}
@@ -502,7 +364,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
- bool is_last_cmd;
if (!stat)
return IRQ_NONE;
@@ -515,14 +376,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
i2c->cmd_err = -EIO;
- if (!i2c->dma_mode) {
- is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
- MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
-
- if (is_last_cmd || i2c->cmd_err)
- complete(&i2c->cmd_complete);
- }
-
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
@@ -556,23 +409,14 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
int ret;
/*
- * The MXS I2C DMA mode is prefered and enabled by default.
- * The PIO mode is still supported, but should be used only
- * for debuging purposes etc.
- */
- i2c->dma_mode = !use_pioqueue;
- if (!i2c->dma_mode)
- dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n");
-
- /*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
*/
ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
&i2c->dma_channel);
if (ret) {
- dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n");
- i2c->dma_mode = 0;
+ dev_err(dev, "Failed to get DMA channel!\n");
+ return -ENODEV;
}
ret = of_property_read_u32(node, "clock-frequency", &speed);
@@ -634,15 +478,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
}
/* Setup the DMA */
- if (i2c->dma_mode) {
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- i2c->dma_data.chan_irq = dmairq;
- i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
- if (!i2c->dmach) {
- dev_err(dev, "Failed to request dma\n");
- return -ENODEV;
- }
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ i2c->dma_data.chan_irq = dmairq;
+ i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+ if (!i2c->dmach) {
+ dev_err(dev, "Failed to request dma\n");
+ return -ENODEV;
}
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 698d7acb0f0..02c3115a2df 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -644,7 +644,11 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
pm_runtime_get_sync(&dev->adev->dev);
- clk_enable(dev->clk);
+ status = clk_prepare_enable(dev->clk);
+ if (status) {
+ dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
+ goto out_clk;
+ }
status = init_hw(dev);
if (status)
@@ -671,7 +675,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
}
out:
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
+out_clk:
pm_runtime_put_sync(&dev->adev->dev);
dev->busy = false;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index f981ac4e678..dcea77bf6f5 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -742,7 +742,7 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev)
}
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
- tegra_i2c_isr, 0, pdev->name, i2c_dev);
+ tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
return ret;
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/i2c-stub.c
index b1b3447942c..d0a9c590c3c 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -2,7 +2,7 @@
i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007, 2012 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -51,8 +51,8 @@ struct stub_chip {
static struct stub_chip *stub_chips;
/* Return negative errno on error. */
-static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size, union i2c_smbus_data * data)
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+ char read_write, u8 command, int size, union i2c_smbus_data *data)
{
s32 ret;
int i, len;
@@ -78,14 +78,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
chip->pointer = command;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "wrote 0x%02x.\n",
- addr, command);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+ addr, command);
} else {
data->byte = chip->words[chip->pointer++] & 0xff;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "read 0x%02x.\n",
- addr, data->byte);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, read 0x%02x.\n",
+ addr, data->byte);
}
ret = 0;
@@ -95,14 +95,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] &= 0xff00;
chip->words[command] |= data->byte;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "wrote 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
} else {
data->byte = chip->words[command] & 0xff;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "read 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
}
chip->pointer = command + 1;
@@ -112,14 +112,14 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] = data->word;
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "wrote 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
} else {
data->word = chip->words[command];
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "read 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
}
ret = 0;
@@ -132,17 +132,17 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
chip->words[command + i] &= 0xff00;
chip->words[command + i] |= data->block[1 + i];
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "wrote %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+ addr, len, command);
} else {
for (i = 0; i < len; i++) {
data->block[1 + i] =
chip->words[command + i] & 0xff;
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "read %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
+ addr, len, command);
}
ret = 0;
@@ -179,25 +179,24 @@ static int __init i2c_stub_init(void)
int i, ret;
if (!chip_addr[0]) {
- printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
+ pr_err("i2c-stub: Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
- printk(KERN_ERR "i2c-stub: Invalid chip address "
- "0x%02x\n", chip_addr[i]);
+ pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+ chip_addr[i]);
return -EINVAL;
}
- printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
- chip_addr[i]);
+ pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
if (!stub_chips) {
- printk(KERN_ERR "i2c-stub: Out of memory\n");
+ pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
@@ -219,4 +218,3 @@ MODULE_LICENSE("GPL");
module_init(i2c_stub_init);
module_exit(i2c_stub_exit);
-
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index 5f097f309b9..7fa5b24b16d 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -169,7 +169,7 @@ static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev)
mux->busses = devm_kzalloc(&pdev->dev,
sizeof(mux->busses) * mux->pdata->bus_count,
GFP_KERNEL);
- if (!mux->states) {
+ if (!mux->busses) {
dev_err(&pdev->dev, "Cannot allocate busses\n");
ret = -ENOMEM;
goto err;
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-30 21:26:54 +0000