aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c24
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c6
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/scx200_acb.c6
4 files changed, 21 insertions, 17 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index d6d58684712..85584a547c2 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -47,8 +47,8 @@
/* ----- global variables --------------------------------------------- */
static int bit_test; /* see if the line-setting functions work */
-module_param(bit_test, bool, 0);
-MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck");
+module_param(bit_test, int, S_IRUGO);
+MODULE_PARM_DESC(bit_test, "lines testing - 0 off; 1 report; 2 fail if stuck");
#ifdef DEBUG
static int i2c_debug = 1;
@@ -250,7 +250,9 @@ static int test_bus(struct i2c_adapter *i2c_adap)
sda = getsda(adap);
scl = (adap->getscl == NULL) ? 1 : getscl(adap);
if (!scl || !sda) {
- printk(KERN_WARNING "%s: bus seems to be busy\n", name);
+ printk(KERN_WARNING
+ "%s: bus seems to be busy (scl=%d, sda=%d)\n",
+ name, scl, sda);
goto bailout;
}
@@ -441,7 +443,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
acknak(i2c_adap, 0);
dev_err(&i2c_adap->dev, "readbytes: invalid "
"block length (%d)\n", inval);
- return -EREMOTEIO;
+ return -EPROTO;
}
/* The original count value accounts for the extra
bytes, that is, either 1 for a regular transaction,
@@ -470,7 +472,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
* reads, writes as well as 10bit-addresses.
* returns:
* 0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set
- * -x an error occurred (like: -EREMOTEIO if the device did not answer, or
+ * -x an error occurred (like: -ENXIO if the device did not answer, or
* -ETIMEDOUT, for example if the lines are stuck...)
*/
static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
@@ -493,14 +495,14 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at extended address code\n");
- return -EREMOTEIO;
+ return -ENXIO;
}
/* the remaining 8 bit address */
ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
dev_err(&i2c_adap->dev, "died at 2nd address code\n");
- return -EREMOTEIO;
+ return -ENXIO;
}
if (flags & I2C_M_RD) {
bit_dbg(3, &i2c_adap->dev, "emitting repeated "
@@ -512,7 +514,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at repeated address code\n");
- return -EREMOTEIO;
+ return -EIO;
}
}
} else { /* normal 7bit address */
@@ -570,7 +572,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
- ret = -EREMOTEIO;
+ ret = -EIO;
goto bailout;
}
} else {
@@ -581,7 +583,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
- ret = -EREMOTEIO;
+ ret = -EIO;
goto bailout;
}
}
@@ -624,7 +626,7 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap,
if (bit_test) {
ret = test_bus(adap);
- if (ret < 0)
+ if (bit_test >= 2 && ret < 0)
return -ENODEV;
}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 4ca9cf9cde7..beb9ffe2564 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -196,7 +196,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
} else {
dev_dbg(&i2c_adap->dev, "bus is not idle. status is "
"%#04x\n", state);
- return -EAGAIN;
+ return -EBUSY;
}
}
@@ -224,7 +224,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
}
curmsg = 0;
- ret = -EREMOTEIO;
+ ret = -EIO;
while (curmsg < num) {
state = pca_status(adap);
@@ -259,6 +259,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after SLA+W\n");
pca_stop(adap);
+ ret = -ENXIO;
goto out;
case 0x40: /* SLA+R has been transmitted; ACK has been received */
@@ -283,6 +284,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after SLA+R\n");
pca_stop(adap);
+ ret = -ENXIO;
goto out;
case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 646068e5100..d1fc5cf9aa4 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -789,7 +789,7 @@ config I2C_ACORN
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on ISA && BROKEN_ON_SMP
+ depends on ISA && HAS_IOPORT && BROKEN_ON_SMP
select I2C_ALGOPCF
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 986e5f62deb..91e349c884c 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -550,7 +550,7 @@ static int __devexit scx200_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_driver scx200_pci_drv = {
+static struct platform_driver scx200_pci_driver = {
.driver = {
.name = "cs5535-smb",
.owner = THIS_MODULE,
@@ -593,14 +593,14 @@ static int __init scx200_acb_init(void)
return 0;
/* No ISA devices; register the platform driver for PCI-based devices */
- return platform_driver_register(&scx200_pci_drv);
+ return platform_driver_register(&scx200_pci_driver);
}
static void __exit scx200_acb_cleanup(void)
{
struct scx200_acb_iface *iface;
- platform_driver_unregister(&scx200_pci_drv);
+ platform_driver_unregister(&scx200_pci_driver);
mutex_lock(&scx200_acb_list_mutex);
while ((iface = scx200_acb_list) != NULL) {
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-16 00:42:29 +0000