diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-davinci.c | 57 |
1 files changed, 53 insertions, 4 deletions
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 352b4e7bdd9..2222c87876b 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -37,6 +37,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/cpufreq.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/i2c.h> @@ -44,6 +45,7 @@ /* ----- global defines ----------------------------------------------- */ #define DAVINCI_I2C_TIMEOUT (1*HZ) +#define DAVINCI_I2C_MAX_TRIES 2 #define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_AAS | \ DAVINCI_I2C_IMR_SCD | \ DAVINCI_I2C_IMR_ARDY | \ @@ -131,6 +133,44 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg) return __raw_readw(i2c_dev->base + reg); } +/* Generate a pulse on the i2c clock pin. */ +static void generic_i2c_clock_pulse(unsigned int scl_pin) +{ + u16 i; + + if (scl_pin) { + /* Send high and low on the SCL line */ + for (i = 0; i < 9; i++) { + gpio_set_value(scl_pin, 0); + udelay(20); + gpio_set_value(scl_pin, 1); + udelay(20); + } + } +} + +/* This routine does i2c bus recovery as specified in the + * i2c protocol Rev. 03 section 3.16 titled "Bus clear" + */ +static void i2c_recover_bus(struct davinci_i2c_dev *dev) +{ + u32 flag = 0; + struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; + + dev_err(dev->dev, "initiating i2c bus recovery\n"); + /* Send NACK to the slave */ + flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); + flag |= DAVINCI_I2C_MDR_NACK; + /* write the data into mode register */ + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); + if (pdata) + generic_i2c_clock_pulse(pdata->scl_pin); + /* Send STOP */ + flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); + flag |= DAVINCI_I2C_MDR_STP; + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); +} + static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, int val) { @@ -236,14 +276,22 @@ static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev, char allow_sleep) { unsigned long timeout; + static u16 to_cnt; timeout = jiffies + dev->adapter.timeout; while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB) { - if (time_after(jiffies, timeout)) { - dev_warn(dev->dev, - "timeout waiting for bus ready\n"); - return -ETIMEDOUT; + if (to_cnt <= DAVINCI_I2C_MAX_TRIES) { + if (time_after(jiffies, timeout)) { + dev_warn(dev->dev, + "timeout waiting for bus ready\n"); + to_cnt++; + return -ETIMEDOUT; + } else { + to_cnt = 0; + i2c_recover_bus(dev); + i2c_davinci_init(dev); + } } if (allow_sleep) schedule_timeout(1); @@ -327,6 +375,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) dev->adapter.timeout); if (r == 0) { dev_err(dev->dev, "controller timed out\n"); + i2c_recover_bus(dev); i2c_davinci_init(dev); dev->buf_len = 0; return -ETIMEDOUT; |