diff options
Diffstat (limited to 'drivers/i2c')
63 files changed, 2133 insertions, 1506 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5f13c62e64b..5a3bb3d738d 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -49,7 +49,6 @@ config I2C_CHARDEV config I2C_MUX tristate "I2C bus multiplexing support" - depends on EXPERIMENTAL help Say Y here if you want the I2C core to support the ability to handle multiplexed I2C bus topologies, by presenting each diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 7f0b8321974..fad22b0bb5b 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -608,7 +608,7 @@ bailout: static u32 bit_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + return I2C_FUNC_I2C | I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index d2c5095deea..b4aaa1bd672 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -133,7 +133,7 @@ config I2C_PIIX4 ATI IXP300 ATI IXP400 ATI SB600 - ATI SB700 + ATI SB700/SP5100 ATI SB800 AMD Hudson-2 Serverworks OSB4 @@ -143,6 +143,10 @@ config I2C_PIIX4 Serverworks HT-1100 SMSC Victory66 + Some AMD chipsets contain two PIIX4-compatible SMBus + controllers. This driver will attempt to use both controllers + on the SB700/SP5100, if they have been initialized by the BIOS. + This driver can also be built as a module. If so, the module will be called i2c-piix4. @@ -351,7 +355,7 @@ config I2C_DAVINCI For details please see http://www.ti.com/davinci config I2C_DESIGNWARE_PLATFORM - tristate "Synopsys DesignWare Platfrom" + tristate "Synopsys DesignWare Platform" depends on HAVE_CLK help If you say yes to this option, support will be included for the @@ -445,20 +449,6 @@ config I2C_IOP3XX This driver can also be built as a module. If so, the module will be called i2c-iop3xx. -config I2C_IXP2000 - tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" - depends on ARCH_IXP2000 - select I2C_ALGOBIT - help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based - system and are using GPIO lines for an I2C bus. - - This support is also available as a module. If so, the module - will be called i2c-ixp2000. - - This driver is deprecated and will be dropped soon. Use i2c-gpio - instead. - config I2C_MPC tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" depends on PPC @@ -472,7 +462,7 @@ config I2C_MPC config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL + depends on (MV64X60 || PLAT_ORION) help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. @@ -483,6 +473,7 @@ config I2C_MV64XXX config I2C_MXS tristate "Freescale i.MX28 I2C interface" depends on SOC_IMX28 + select STMP_DEVICE help Say Y here if you want to use the I2C bus controller on the Freescale i.MX28 processors. @@ -492,10 +483,11 @@ config I2C_MXS config I2C_NOMADIK tristate "ST-Ericsson Nomadik/Ux500 I2C Controller" - depends on PLAT_NOMADIK + depends on ARM_AMBA help If you say yes to this option, support will be included for the - I2C interface from ST-Ericsson's Nomadik and Ux500 architectures. + I2C interface from ST-Ericsson's Nomadik and Ux500 architectures, + as well as the STA2X11 PCIe I/O HUB. config I2C_NUC900 tristate "NUC900 I2C Driver" diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 569567b0d02..ce3c2be7fb4 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o -obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_MXS) += i2c-mxs.o diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index e66d248fc12..125cd8e0ad2 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -531,15 +531,7 @@ static struct pci_driver ali1535_driver = { .remove = __devexit_p(ali1535_remove), }; -static int __init i2c_ali1535_init(void) -{ - return pci_register_driver(&ali1535_driver); -} - -static void __exit i2c_ali1535_exit(void) -{ - pci_unregister_driver(&ali1535_driver); -} +module_pci_driver(ali1535_driver); MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " @@ -547,6 +539,3 @@ MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "and Dan Eaton <dan.eaton@rocketlogix.com>"); MODULE_DESCRIPTION("ALI1535 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_ali1535_init); -module_exit(i2c_ali1535_exit); diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 47ae0091e02..e02d9f86c6a 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -431,18 +431,6 @@ static struct pci_driver ali1563_pci_driver = { .remove = __devexit_p(ali1563_remove), }; -static int __init ali1563_init(void) -{ - return pci_register_driver(&ali1563_pci_driver); -} - -module_init(ali1563_init); - -static void __exit ali1563_exit(void) -{ - pci_unregister_driver(&ali1563_pci_driver); -} - -module_exit(ali1563_exit); +module_pci_driver(ali1563_pci_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 087ea9caa74..ce8d26d053a 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -513,21 +513,10 @@ static struct pci_driver ali15x3_driver = { .remove = __devexit_p(ali15x3_remove), }; -static int __init i2c_ali15x3_init(void) -{ - return pci_register_driver(&ali15x3_driver); -} - -static void __exit i2c_ali15x3_exit(void) -{ - pci_unregister_driver(&ali15x3_driver); -} +module_pci_driver(ali15x3_driver); MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("ALI15X3 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_ali15x3_init); -module_exit(i2c_ali15x3_exit); diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index eb778bf15c1..304aa03b57b 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -410,21 +410,10 @@ static struct pci_driver amd756_driver = { .remove = __devexit_p(amd756_remove), }; -static int __init amd756_init(void) -{ - return pci_register_driver(&amd756_driver); -} - -static void __exit amd756_exit(void) -{ - pci_unregister_driver(&amd756_driver); -} +module_pci_driver(amd756_driver); MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>"); MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(amd756_smbus); - -module_init(amd756_init) -module_exit(amd756_exit) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index e5ac53b99b0..0919ac1d99a 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -491,15 +491,4 @@ static struct pci_driver amd8111_driver = { .remove = __devexit_p(amd8111_remove), }; -static int __init i2c_amd8111_init(void) -{ - return pci_register_driver(&amd8111_driver); -} - -static void __exit i2c_amd8111_exit(void) -{ - pci_unregister_driver(&amd8111_driver); -} - -module_init(i2c_amd8111_init); -module_exit(i2c_amd8111_exit); +module_pci_driver(amd8111_driver); diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 1679deef9c8..e24484beef0 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -279,30 +279,31 @@ static int __devexit at91_i2c_remove(struct platform_device *pdev) /* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */ -static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg) +static int at91_i2c_suspend(struct device *dev) { clk_disable(twi_clk); return 0; } -static int at91_i2c_resume(struct platform_device *pdev) +static int at91_i2c_resume(struct device *dev) { return clk_enable(twi_clk); } +static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume); +#define AT91_I2C_PM (&at91_i2c_pm) + #else -#define at91_i2c_suspend NULL -#define at91_i2c_resume NULL +#define AT91_I2C_PM NULL #endif static struct platform_driver at91_i2c_driver = { .probe = at91_i2c_probe, .remove = __devexit_p(at91_i2c_remove), - .suspend = at91_i2c_suspend, - .resume = at91_i2c_resume, .driver = { .name = "at91_i2c", .owner = THIS_MODULE, + .pm = AT91_I2C_PM, }, }; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index cdb59e5b23f..0cf780fd6ef 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -25,6 +25,7 @@ #include <asm/blackfin.h> #include <asm/portmux.h> #include <asm/irq.h> +#include <asm/bfin_twi.h> /* SMBus mode*/ #define TWI_I2C_MODE_STANDARD 1 @@ -32,56 +33,6 @@ #define TWI_I2C_MODE_COMBINED 3 #define TWI_I2C_MODE_REPEAT 4 -struct bfin_twi_iface { - int irq; - spinlock_t lock; - char read_write; - u8 command; - u8 *transPtr; - int readNum; - int writeNum; - int cur_mode; - int manual_stop; - int result; - struct i2c_adapter adap; - struct completion complete; - struct i2c_msg *pmsg; - int msg_num; - int cur_msg; - u16 saved_clkdiv; - u16 saved_control; - void __iomem *regs_base; -}; - - -#define DEFINE_TWI_REG(reg, off) \ -static inline u16 read_##reg(struct bfin_twi_iface *iface) \ - { return bfin_read16(iface->regs_base + (off)); } \ -static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \ - { bfin_write16(iface->regs_base + (off), v); } - -DEFINE_TWI_REG(CLKDIV, 0x00) -DEFINE_TWI_REG(CONTROL, 0x04) -DEFINE_TWI_REG(SLAVE_CTL, 0x08) -DEFINE_TWI_REG(SLAVE_STAT, 0x0C) -DEFINE_TWI_REG(SLAVE_ADDR, 0x10) -DEFINE_TWI_REG(MASTER_CTL, 0x14) -DEFINE_TWI_REG(MASTER_STAT, 0x18) -DEFINE_TWI_REG(MASTER_ADDR, 0x1C) -DEFINE_TWI_REG(INT_STAT, 0x20) -DEFINE_TWI_REG(INT_MASK, 0x24) -DEFINE_TWI_REG(FIFO_CTL, 0x28) -DEFINE_TWI_REG(FIFO_STAT, 0x2C) -DEFINE_TWI_REG(XMT_DATA8, 0x80) -DEFINE_TWI_REG(XMT_DATA16, 0x84) -DEFINE_TWI_REG(RCV_DATA8, 0x88) -DEFINE_TWI_REG(RCV_DATA16, 0x8C) - -static const u16 pin_req[2][3] = { - {P_TWI0_SCL, P_TWI0_SDA, 0}, - {P_TWI1_SCL, P_TWI1_SDA, 0}, -}; - static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, unsigned short twi_int_status) { @@ -99,7 +50,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, */ else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | MDIR | RSTART); + read_MASTER_CTL(iface) | MDIR); else if (iface->manual_stop) write_MASTER_CTL(iface, read_MASTER_CTL(iface) | STOP); @@ -107,10 +58,10 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, iface->cur_msg + 1 < iface->msg_num) { if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | RSTART | MDIR); + read_MASTER_CTL(iface) | MDIR); else write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) | RSTART) & ~MDIR); + read_MASTER_CTL(iface) & ~MDIR); } } if (twi_int_status & RCVSERV) { @@ -130,17 +81,25 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, } iface->transPtr++; iface->readNum--; - } else if (iface->manual_stop) { - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | STOP); - } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg + 1 < iface->msg_num) { - if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | RSTART | MDIR); - else + } + + if (iface->readNum == 0) { + if (iface->manual_stop) { + /* Temporary workaround to avoid possible bus stall - + * Flush FIFO before issuing the STOP condition + */ + read_RCV_DATA16(iface); write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) | RSTART) & ~MDIR); + read_MASTER_CTL(iface) | STOP); + } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && + iface->cur_msg + 1 < iface->msg_num) { + if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | MDIR); + else + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & ~MDIR); + } } } if (twi_int_status & MERR) { @@ -193,7 +152,8 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, return; } if (twi_int_status & MCOMP) { - if ((read_MASTER_CTL(iface) & MEN) == 0 && + if (twi_int_status & (XMTSERV | RCVSERV) && + (read_MASTER_CTL(iface) & MEN) == 0 && (iface->cur_mode == TWI_I2C_MODE_REPEAT || iface->cur_mode == TWI_I2C_MODE_COMBINED)) { iface->result = -1; @@ -221,7 +181,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, write_MASTER_CTL(iface, read_MASTER_CTL(iface) & ~RSTART); } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg+1 < iface->msg_num) { + iface->cur_msg + 1 < iface->msg_num) { iface->cur_msg++; iface->transPtr = iface->pmsg[iface->cur_msg].buf; iface->writeNum = iface->readNum = @@ -241,27 +201,29 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, } } - if (iface->pmsg[iface->cur_msg].len <= 255) - write_MASTER_CTL(iface, + if (iface->pmsg[iface->cur_msg].len <= 255) { + write_MASTER_CTL(iface, (read_MASTER_CTL(iface) & (~(0xff << 6))) | - (iface->pmsg[iface->cur_msg].len << 6)); - else { + (iface->pmsg[iface->cur_msg].len << 6)); + iface->manual_stop = 0; + } else { write_MASTER_CTL(iface, (read_MASTER_CTL(iface) | (0xff << 6))); iface->manual_stop = 1; } - /* remove restart bit and enable master receive */ - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & ~RSTART); + /* remove restart bit before last message */ + if (iface->cur_msg + 1 == iface->msg_num) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & ~RSTART); } else { iface->result = 1; write_INT_MASK(iface, 0); write_MASTER_CTL(iface, 0); } + complete(&iface->complete); } - complete(&iface->complete); } /* Interrupt handler */ @@ -298,8 +260,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, if (!(read_CONTROL(iface) & TWI_ENA)) return -ENXIO; - while (read_MASTER_STAT(iface) & BUSBUSY) - yield(); + if (read_MASTER_STAT(iface) & BUSBUSY) + return -EAGAIN; iface->pmsg = msgs; iface->msg_num = num; @@ -311,7 +273,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, return -EINVAL; } - iface->cur_mode = TWI_I2C_MODE_REPEAT; + if (iface->msg_num > 1) + iface->cur_mode = TWI_I2C_MODE_REPEAT; iface->manual_stop = 0; iface->transPtr = pmsg->buf; iface->writeNum = iface->readNum = pmsg->len; @@ -356,6 +319,7 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, /* Master enable */ write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | + (iface->msg_num > 1 ? RSTART : 0) | ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); SSYNC(); @@ -398,8 +362,8 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr, if (!(read_CONTROL(iface) & TWI_ENA)) return -ENXIO; - while (read_MASTER_STAT(iface) & BUSBUSY) - yield(); + |