diff options
Diffstat (limited to 'drivers/i2c')
51 files changed, 1154 insertions, 498 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index beb10edfe9c..82946acab4c 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -34,7 +34,7 @@ #define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0) #define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0) -static int i2c_debug=0; +static int i2c_debug; #define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val) #define pca_inw(adap, reg) adap->read_byte(adap, reg) diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c index 8ed5ad12552..938848ae162 100644 --- a/drivers/i2c/algos/i2c-algo-sibyte.c +++ b/drivers/i2c/algos/i2c-algo-sibyte.c @@ -42,7 +42,7 @@ /* module parameters: */ -static int bit_scan=0; /* have a look at what's hanging 'round */ +static int bit_scan; /* have a look at what's hanging 'round */ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3badfec75b1..4010fe92e72 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -135,11 +135,12 @@ config I2C_I810 help If you say yes to this option, support will be included for the Intel 810/815 family of mainboard I2C interfaces. Specifically, the - following versions of the chipset is supported: + following versions of the chipset are supported: i810AA i810AB i810E i815 + i845G This driver can also be built as a module. If so, the module will be called i2c-i810. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f021acd2674..ba90f5140af 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -134,7 +134,7 @@ /* -> Read = 1 */ #define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */ - +static struct pci_driver ali1535_driver; static unsigned short ali1535_smba; static DECLARE_MUTEX(i2c_ali1535_sem); @@ -162,7 +162,8 @@ static int ali1535_setup(struct pci_dev *dev) goto exit; } - if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) { + if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, + ali1535_driver.name)) { dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", ali1535_smba); goto exit; @@ -480,7 +481,6 @@ static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali1535_ids[] = { @@ -513,6 +513,7 @@ static void __devexit ali1535_remove(struct pci_dev *dev) } static struct pci_driver ali1535_driver = { + .owner = THIS_MODULE, .name = "ali1535_smbus", .id_table = ali1535_ids, .probe = ali1535_probe, diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 86947504aea..f1a62d89242 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -60,6 +60,7 @@ #define HST_CNTL2_SIZEMASK 0x38 +static struct pci_driver ali1563_pci_driver; static unsigned short ali1563_smba; static int ali1563_transaction(struct i2c_adapter * a, int size) @@ -350,7 +351,8 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } - if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) { + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, + ali1563_pci_driver.name)) { dev_warn(&dev->dev,"Could not allocate I/O space"); goto Err; } @@ -406,7 +408,8 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = { MODULE_DEVICE_TABLE (pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { - .name = "ali1563_i2c", + .owner = THIS_MODULE, + .name = "ali1563_smbus", .id_table = ali1563_id_table, .probe = ali1563_probe, .remove = __devexit_p(ali1563_remove), diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index b3f50bff39a..400b08ed429 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -125,12 +125,13 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short ali15x3_smba = 0; +static struct pci_driver ali15x3_driver; +static unsigned short ali15x3_smba; static int ali15x3_setup(struct pci_dev *ALI15X3_dev) { @@ -166,7 +167,8 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev) if(force_addr) ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1); - if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) { + if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, + ali15x3_driver.name)) { dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region 0x%x already in use!\n", ali15x3_smba); @@ -470,7 +472,6 @@ static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali15x3_ids[] = { @@ -503,6 +504,7 @@ static void __devexit ali15x3_remove(struct pci_dev *dev) } static struct pci_driver ali15x3_driver = { + .owner = THIS_MODULE, .name = "ali15x3_smbus", .id_table = ali15x3_ids, .probe = ali15x3_probe, diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 4e553e8c5cb..f51ab652300 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -169,12 +169,12 @@ static int __init amd756_s4882_init(void) init_MUTEX(&amd756_lock); /* Define the 5 virtual adapters and algorithms structures */ - if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter), + if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL))) { error = -ENOMEM; goto ERROR1; } - if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm), + if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL))) { error = -ENOMEM; goto ERROR2; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 6ad0603384b..de035d137c3 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -85,8 +85,8 @@ #define AMD756_PROCESS_CALL 0x04 #define AMD756_BLOCK_DATA 0x05 - -static unsigned short amd756_ioport = 0; +static struct pci_driver amd756_driver; +static unsigned short amd756_ioport; /* SMBUS event = I/O 28-29 bit 11 @@ -303,7 +303,6 @@ struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; @@ -365,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, amd756_ioport += SMB_ADDR_OFFSET; } - if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) { + if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", amd756_ioport); return -ENODEV; @@ -402,6 +401,7 @@ static void __devexit amd756_remove(struct pci_dev *dev) } static struct pci_driver amd756_driver = { + .owner = THIS_MODULE, .name = "amd756_smbus", .id_table = amd756_ids, .probe = amd756_probe, diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 45ea24ba14d..f3b79a68dbe 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -30,6 +30,8 @@ struct amd_smbus { int size; }; +static struct pci_driver amd8111_driver; + /* * AMD PCI control registers definitions. */ @@ -242,7 +244,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl break; case I2C_SMBUS_BLOCK_PROC_CALL: - protocol |= pec; len = min_t(u8, data->block[0], 31); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); @@ -252,13 +253,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl read_write = I2C_SMBUS_READ; break; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -343,16 +337,15 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) return -ENODEV; - smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL); + smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); if (!smbus) return -ENOMEM; - memset(smbus, 0, sizeof(struct amd_smbus)); smbus->dev = dev; smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0")) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) goto out_kfree; smbus->adapter.owner = THIS_MODULE; @@ -391,6 +384,7 @@ static void __devexit amd8111_remove(struct pci_dev *dev) } static struct pci_driver amd8111_driver = { + .owner = THIS_MODULE, .name = "amd8111_smbus2", .id_table = amd8111_ids, .probe = amd8111_probe, diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 6930b660e50..59f8308c235 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -22,7 +22,7 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even Frodo Looijaard <frodol@dds.nl> */ -/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of +/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of for Alpha Processor Inc. UP-2000(+) boards */ #include <linux/kernel.h> @@ -46,12 +46,14 @@ #define DEFAULT_BASE 0x330 static int base; +static u8 __iomem *base_iomem; + static int irq; static int clock = 0x1c; static int own = 0x55; static int mmapped; -/* vdovikin: removed static struct i2c_pcf_isa gpi; code - +/* vdovikin: removed static struct i2c_pcf_isa gpi; code - this module in real supports only one device, due to missing arguments in some functions, called from the algo-pcf module. Sometimes it's need to be rewriten - but for now just remove this for simpler reading */ @@ -60,40 +62,33 @@ static wait_queue_head_t pcf_wait; static int pcf_pending; static spinlock_t lock; +static struct i2c_adapter pcf_isa_ops; + /* ----- local functions ---------------------------------------------- */ static void pcf_isa_setbyte(void *data, int ctl, int val) { - int address = ctl ? (base + 1) : base; + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; /* enable irq if any specified for serial operation */ if (ctl && irq && (val & I2C_PCF_ESO)) { val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255); - - switch (mmapped) { - case 0: /* regular I/O */ - outb(val, address); - break; - case 2: /* double mapped I/O needed for UP2000 board, - I don't know why this... */ - writeb(val, (void *)address); - /* fall */ - case 1: /* memory mapped I/O */ - writeb(val, (void *)address); - break; - } + pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val); + iowrite8(val, address); +#ifdef __alpha__ + /* API UP2000 needs some hardware fudging to make the write stick */ + iowrite8(val, address); +#endif } static int pcf_isa_getbyte(void *data, int ctl) { - int address = ctl ? (base + 1) : base; - int val = mmapped ? readb((void *)address) : inb(address); - - pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val); + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; + int val = ioread8(address); + pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val); return (val); } @@ -149,16 +144,40 @@ static int pcf_isa_init(void) { spin_lock_init(&lock); if (!mmapped) { - if (!request_region(base, 2, "i2c (isa bus adapter)")) { - printk(KERN_ERR - "i2c-elektor: requested I/O region (0x%X:2) " - "is in use.\n", base); + if (!request_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested I/O region (%#x:2) is " + "in use\n", pcf_isa_ops.name, base); + return -ENODEV; + } + base_iomem = ioport_map(base, 2); + if (!base_iomem) { + printk(KERN_ERR "%s: remap of I/O region %#x failed\n", + pcf_isa_ops.name, base); + release_region(base, 2); + return -ENODEV; + } + } else { + if (!request_mem_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested memory region (%#x:2) " + "is in use\n", pcf_isa_ops.name, base); + return -ENODEV; + } + base_iomem = ioremap(base, 2); + if (base_iomem == NULL) { + printk(KERN_ERR "%s: remap of memory region %#x " + "failed\n", pcf_isa_ops.name, base); + release_mem_region(base, 2); return -ENODEV; } } + pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base, + base_iomem); + if (irq > 0) { - if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { - printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); + if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name, + NULL) < 0) { + printk(KERN_ERR "%s: Request irq%d failed\n", + pcf_isa_ops.name, irq); irq = 0; } else enable_irq(irq); @@ -186,47 +205,49 @@ static struct i2c_adapter pcf_isa_ops = { .class = I2C_CLASS_HWMON, .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, - .name = "PCF8584 ISA adapter", + .name = "i2c-elektor", }; -static int __init i2c_pcfisa_init(void) +static int __init i2c_pcfisa_init(void) { #ifdef __alpha__ - /* check to see we have memory mapped PCF8584 connected to the + /* check to see we have memory mapped PCF8584 connected to the Cypress cy82c693 PCI-ISA bridge as on UP2000 board */ if (base == 0) { struct pci_dev *cy693_dev; - - cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, + + cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { - char config; + unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { - - pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config); + + pr_debug("%s: found cy82c693, config " + "register 0x47 = 0x%02x\n", + pcf_isa_ops.name, config); /* UP2000 board has this register set to 0xe1, - but the most significant bit as seems can be + but the most significant bit as seems can be reset during the proper initialisation - sequence if guys from API decides to do that - (so, we can even enable Tsunami Pchip - window for the upper 1 Gb) */ + sequence if guys from API decides to do that + (so, we can even enable Tsunami Pchip + window for the upper 1 Gb) */ /* so just check for ROMCS at 0xe0000, - ROMCS enabled for writes + ROMCS enabled for writes and external XD Bus buffer in use. */ if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; - /* I don't know why we need to - write twice */ - mmapped = 2; - /* UP2000 drives ISA with + mmapped = 1; + /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ clock = I2C_PCF_CLK | I2C_PCF_TRNS90; - printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n"); + pr_info("%s: found API UP2000 like " + "board, will probe PCF8584 " + "later\n", pcf_isa_ops.name); } } pci_dev_put(cy693_dev); @@ -236,12 +257,11 @@ static int __init i2c_pcfisa_init(void) /* sanity checks for mmapped I/O */ if (mmapped && base < 0xc8000) { - printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base); + printk(KERN_ERR "%s: incorrect base address (%#x) specified " + "for mmapped I/O\n", pcf_isa_ops.name, base); return -ENODEV; } - printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n"); - if (base == 0) { base = DEFAULT_BASE; } @@ -251,8 +271,8 @@ static int __init i2c_pcfisa_init(void) return -ENODEV; if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) goto fail; - - printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base); + + dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base); return 0; @@ -262,8 +282,13 @@ static int __init i2c_pcfisa_init(void) free_irq(irq, NULL); } - if (!mmapped) - release_region(base , 2); + if (!mmapped) { + ioport_unmap(base_iomem); + release_region(base, 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } return -ENODEV; } @@ -276,8 +301,13 @@ static void i2c_pcfisa_exit(void) free_irq(irq, NULL); } - if (!mmapped) - release_region(base , 2); + if (!mmapped) { + ioport_unmap(base_iomem); + release_region(base, 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } } MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index e0cb3b0f92f..1b5354e24bf 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -155,6 +155,7 @@ static void __devexit hydra_remove(struct pci_dev *dev) static struct pci_driver hydra_driver = { + .owner = THIS_MODULE, .name = "hydra_smbus", .id_table = hydra_ids, .probe = hydra_probe, diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 709beab7660..4f63195069d 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,10 +52,6 @@ #include <linux/i2c.h> #include <asm/io.h> -#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC -#define HAVE_PEC -#endif - /* I801 SMBus address offsets */ #define SMBHSTSTS (0 + i801_smba) #define SMBHSTCNT (2 + i801_smba) @@ -106,10 +102,11 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); static int i801_transaction(void); -static int i801_block_transaction(union i2c_smbus_data *data, - char read_write, int command); +static int i801_block_transaction(union i2c_smbus_data *data, char read_write, + int command, int hwpec); static unsigned short i801_smba; +static struct pci_driver i801_driver; static struct pci_dev *I801_dev; static int isich4; @@ -143,7 +140,7 @@ static int i801_setup(struct pci_dev *dev) } } - if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) { + if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) { dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n", i801_smba); error_return = -EBUSY; @@ -252,7 +249,7 @@ static int i801_transaction(void) /* All-inclusive block transaction function */ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, - int command) + int command, int hwpec) { int i, len; int smbcmd; @@ -391,8 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } -#ifdef HAVE_PEC - if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { + if (hwpec) { /* wait for INTR bit as advised by Intel */ timeout = 0; do { @@ -406,7 +402,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } outb_p(temp, SMBHSTSTS); } -#endif result = 0; END: if (command == I2C_SMBUS_I2C_BLOCK_DATA) { @@ -421,14 +416,13 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { - int hwpec = 0; + int hwpec; int block = 0; int ret, xact = 0; -#ifdef HAVE_PEC - if(isich4) - hwpec = (flags & I2C_CLIENT_PEC) != 0; -#endif + hwpec = isich4 && (flags & I2C_CLIENT_PEC) + && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA; switch (size) { case I2C_SMBUS_QUICK: @@ -463,11 +457,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: -#ifdef HAVE_PEC - case I2C_SMBUS_BLOCK_DATA_PEC: - if(hwpec && size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; -#endif outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); @@ -479,27 +468,18 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } -#ifdef HAVE_PEC - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(1, SMBAUXCTL); /* enable HW PEC */ - } -#endif + if (hwpec) + outb_p(1, SMBAUXCTL); /* enable hardware PEC */ + if(block) - ret = i801_block_transaction(data, read_write, size); + ret = i801_block_transaction(data, read_write, size, hwpec); else { outb_p(xact | ENABLE_INT9, SMBHSTCNT); ret = i801_transaction(); } -#ifdef HAVE_PEC - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(0, SMBAUXCTL); - } -#endif + if (hwpec) + outb_p(0, SMBAUXCTL); /* disable hardware PEC */ if(block) return ret; @@ -526,12 +506,7 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK -#ifdef HAVE_PEC - | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | - I2C_FUNC_SMBUS_HWPEC_CALC - : 0) -#endif - ; + | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0); } static struct i2c_algorithm smbus_algorithm = { @@ -543,7 +518,6 @@ static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id i801_ids[] = { @@ -586,6 +560,7 @@ static void __devexit i801_remove(struct pci_dev *dev) } static struct pci_driver i801_driver = { + .owner = THIS_MODULE, .name = "i801_smbus", .id_table = i801_ids, .probe = i801_probe, diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 0ff7016e062..52bc30593bd 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -32,6 +32,7 @@ i810AB 7123 i810E 7125 i815 1132 + i845G 2562 */ #include <linux/kernel.h> @@ -232,6 +233,7 @@ static void __devexit i810_remove(struct pci_dev *dev) } static struct pci_driver i810_driver = { + .owner = THIS_MODULE, .name = "i810_smbus", .id_table = i810_ids, .probe = i810_probe, diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index a3ed9590f02..1a587253d71 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -672,13 +672,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){ printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", ocp->def->index); - if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){ + if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", ocp->def->index); return -ENOMEM; } - memset(dev, 0, sizeof(*dev)); dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 7bd9102db70..9888fae1f37 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -43,7 +43,7 @@ #include "i2c-iop3xx.h" /* global unit counter */ -static int i2c_id = 0; +static int i2c_id; static inline unsigned char iic_cook_addr(struct i2c_msg *msg) @@ -440,19 +440,17 @@ iop3xx_i2c_probe(struct device *dev) struct i2c_adapter *new_adapter; struct i2c_algo_iop3xx_data *adapter_data; - new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); if (!new_adapter) { ret = -ENOMEM; goto out; } - memset((void*)new_adapter, 0, sizeof(*new_adapter)); - adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); + adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); if (!adapter_data) { ret = -ENOMEM; goto free_adapter; } - memset((void*)adapter_data, 0, sizeof(*adapter_data)); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -525,6 +523,7 @@ out: static struct device_driver iop3xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IOP3xx-I2C", .bus = &platform_bus_type, .probe = iop3xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index bdc6806dafa..4fdc0241160 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -92,6 +92,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver) /* Add the driver to the list of i2c drivers in the driver core */ driver->driver.name = driver->name; + driver->driver.owner = driver->owner; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_isa_device_probe; driver->driver.remove = i2c_isa_device_remove; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 1956af382cd..42016ee6ef1 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -36,6 +36,8 @@ #include <asm/hardware.h> /* Pick up IXP2000-specific bits */ #include <asm/arch/gpio.h> +static struct device_driver ixp2000_i2c_driver; + static inline int ixp2000_scl_pin(void *data) { return ((struct ixp2000_i2c_pins*)data)->scl_pin; @@ -104,11 +106,10 @@ static int ixp2000_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp2000_i2c_data *drv_data = - kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(*drv_data)); drv_data->gpio_pins = gpio; drv_data->algo_data.data = gpio; @@ -121,6 +122,8 @@ static int ixp2000_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP2000, + strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data, drv_data->adapter.dev.parent = &plat_dev->dev; @@ -142,6 +145,7 @@ static int ixp2000_i2c_probe(struct device *dev) } static struct device_driver ixp2000_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP2000-I2C", .bus = &platform_bus_type, .probe = ixp2000_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index f6f5ca31fdb..69303ab65e0 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -35,6 +35,8 @@ #include <asm/hardware.h> /* Pick up IXP4xx-specific bits */ +static struct device_driver ixp4xx_i2c_driver; + static inline int ixp4xx_scl_pin(void *data) { return ((struct ixp4xx_i2c_pins*)data)->scl_pin; @@ -105,12 +107,11 @@ static int ixp4xx_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp4xx_i2c_data *drv_data = - kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); if(!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(struct ixp4xx_i2c_data)); drv_data->gpio_pins = gpio; /* @@ -129,6 +130,8 @@ static int ixp4xx_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP4XX; + strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data; drv_data->adapter.dev.parent = &plat_dev->dev; @@ -151,6 +154,7 @@ static int ixp4xx_i2c_probe(struct device *dev) } static struct device_driver ixp4xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP4XX-I2C", .bus = &platform_bus_type, .probe = ixp4xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index eff5896ce86..d61f748278f 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -535,13 +535,12 @@ create_iface(struct device_node *np, struct device *dev) tsize = sizeof(struct keywest_iface) + (sizeof(struct keywest_chan) + 4) * nchan; - iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL); + iface = kzalloc(tsize, GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); pmac_low_i2c_unlock(np); return -ENOMEM; } - memset(iface, 0, tsize); spin_lock_init(&iface->lock); init_completion(&iface->complete); iface->node = of_node_get(np); @@ -716,6 +715,7 @@ static struct of_device_id i2c_keywest_match[] = static struct macio_driver i2c_keywest_macio_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_macio, @@ -724,6 +724,7 @@ static struct macio_driver i2c_keywest_macio_driver = static struct of_platform_driver i2c_keywest_of_platform_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_of_platform, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f065583ddcf..8491633005b 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -296,10 +296,9 @@ static int fsl_i2c_probe(struct device *device) pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; - if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { + if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) { return -ENOMEM; } - memset(i2c, 0, sizeof(*i2c)); i2c->irq = platform_get_irq(pdev, 0); i2c->flags = pdata->device_flags; @@ -361,6 +360,7 @@ static int fsl_i2c_remove(struct device *device) /* Structure for a device driver */ static struct device_driver fsl_i2c_driver = { + .owner = THIS_MODULE, .name = "fsl-i2c", .bus = &platform_bus_type, .probe = fsl_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 99abca45fec..d0d2a6f1386 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -500,13 +500,10 @@ mv64xxx_i2c_probe(struct device *dev) if ((pd->id != 0) || !pdata) return -ENODEV; - drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); - + drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data)); - if (mv64xxx_i2c_map_regs(pd, drv_data)) { rc = -ENODEV; goto exit_kfree; @@ -570,6 +567,7 @@ mv64xxx_i2c_remove(struct device *dev) } static struct device_driver mv64xxx_i2c_driver = { + .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, .bus = &platform_bus_type, .probe = mv64xxx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index fe9c0f42a2b..fd26036e68a 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -97,6 +97,7 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define NVIDIA_SMB_PRTCL_PEC 0x80 +static struct pci_driver nforce2_driver; static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, @@ -113,7 +114,6 @@ static struct i2c_adapter nforce2_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; /* Return -1 on error. See smbus.h for more information */ @@ -188,13 +188,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); return -1; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -285,7 +278,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg, smbus->base = iobase & 0xfffc; smbus->size = 8; - if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) { + if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); return -1; @@ -313,10 +306,8 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ int res1, res2; /* we support 2 SMBus adapters */ - if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus), - GFP_KERNEL))) + if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; - memset (smbuses, 0, 2*sizeof(struct nforce2_smbus)); pci_set_drvdata(dev, smbuses); /* SMBus adapter 1 */ @@ -356,6 +347,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev) } static struct pci_driver nforce2_driver = { + .owner = THIS_MODULE, .name = "nForce2_smbus", .id_table = nforce2_ids, .probe = nforce2_probe, diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 71a2502fe06..2854d858fc9 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -155,12 +155,11 @@ static void i2c_parport_attach (struct parport *port) { struct i2c_par *adapter; - adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL); + adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); if (adapter == NULL) { - printk(KERN_ERR "i2c-parport: Failed to kmalloc\n"); + printk(KERN_ERR "i2c-parport: Failed to kzalloc\n"); return; } - memset(adapter, 0x00, sizeof(struct i2c_par)); pr_debug("i2c-parport: attaching to %s\n", port->name); adapter->pdev = parport_register_device(port, "i2c-parport", @@ -232,7 +231,7 @@ static void i2c_parport_detach (struct parport *port) } } -static struct parport_driver i2c_driver = { +static struct parport_driver i2c_parport_driver = { .name = "i2c-parport", .attach = i2c_parport_attach, .detach = i2c_parport_detach, @@ -250,12 +249,12 @@ static int __init i2c_parport_init(void) type = 0; } - return parport_register_driver(&i2c_driver); + return parport_register_driver(&i2c_parport_driver); } static void __exit i2c_parport_exit(void) { - parport_unregister_driver(&i2c_driver); + parport_unregister_driver(&i2c_parport_driver); } MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 6d48a4da7be..7d63eec423f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -90,13 +90,13 @@ struct sd { /* If force is set to anything different from 0, we forcibly enable the PIIX4. DANGEROUS! */ -static int force = 0; +static int force; module_param (force, int, 0); MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ -static int force_addr = 0; +static int force_addr; module_param (force_addr, int, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " @@ -104,14 +104,15 @@ MODULE_PARM_DESC(force_addr, /* If fix_hstcfg is set to anything different from 0, we reset one of the registers to be a valid value. */ -static int fix_hstcfg = 0; +static int fix_hstcfg; module_param (fix_hstcfg, int, 0); MODULE_PARM_DESC(fix_hstcfg, "Fix config register. Needed on some boards (Force CPCI735)."); static int piix4_transaction(void); -static unsigned short piix4_smba = 0; +static unsigned short piix4_smba; +static struct pci_driver piix4_driver; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { @@ -157,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, } } - if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) { + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", piix4_smba); return -ENODEV; @@ -407,7 +408,6 @@ static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id piix4_ids[] = { @@ -462,6 +462,7 @@ static void __devexit piix4_remove(struct pci_dev *dev) } static struct pci_driver piix4_driver = { + .owner = THIS_MODULE, .name = "piix4_smbus", .id_table = piix4_ids, .probe = piix4_probe, diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c index 8a9f5648a23..bfefe7f7a53 100644 --- a/drivers/i2c/busses/i2c-pmac-smu.c +++ b/drivers/i2c/busses/i2c-pmac-smu.c @@ -211,12 +211,11 @@ static int create_iface(struct device_node *np, struct device *dev) } busid = *reg; - iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL); + iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n"); return -ENOMEM; } - memset(iface, 0, sizeof(struct smu_iface)); init_completion(&iface->complete); iface->busid = busid; diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 83fd16d61ce..42cb1d8ca65 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -83,11 +83,6 @@ struct s_i2c_chip { /* * i2c configuration */ -#ifndef I2C_HW_B_S3VIA -#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ -#endif - -/* delays */ #define CYCLE_DELAY 10 #define TIMEOUT (HZ / 2) @@ -241,14 +236,12 @@ static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_devic struct s_i2c_chip *chip; struct s_i2c_bus *bus; - pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); + pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); chip = (struct s_i2c_chip *)pci_get_drvdata(dev); if (chip == NULL) { return -ENOMEM; } - memset(chip, 0, sizeof(struct s_i2c_chip)); - base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; len = dev->resource[0].end - base + 1; chip->mmio = ioremap_nocache(base, len); @@ -308,6 +301,7 @@ static struct pci_device_id prosavage_pci_tbl[] = { MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl); static struct pci_driver prosavage_driver = { + .owner = THIS_MODULE, .name = "prosavage_smbus", .id_table = prosavage_pci_tbl, .probe = prosavage_probe, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 73a092fb0e7..6ced28e9007 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -879,14 +879,12 @@ static int s3c24xx_i2c_remove(struct device *dev) } #ifdef CONFIG_PM -static int s3c24xx_i2c_resume(struct device *dev, u32 level) +static int s3c24xx_i2c_resume(struct device *dev) { struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); - - if (i2c != NULL && level == RESUME_ENABLE) { - dev_dbg(dev, "resume: level %d\n", level); + + if (i2c != NULL) s3c24xx_i2c_init(i2c); - } return 0; } @@ -898,6 +896,7 @@ static int s3c24xx_i2c_resume(struct device *dev, u32 level) /* device driver for platform bus bits */ static struct device_driver s3c2410_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2410-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, @@ -906,6 +905,7 @@ static struct device_driver s3c2410_i2c_driver = { }; static struct device_driver s3c2440_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2440-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 0c8518298e4..aebe87ba403 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -179,6 +179,7 @@ static void __devexit savage4_remove(struct pci_dev *dev) } static struct pci_driver savage4_driver = { + .owner = THIS_MODULE, .name = "savage4_smbus", .id_table = savage4_ids, .probe = savage4_probe, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 080318d6f54..3ad27c3ba15 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -123,11 +123,12 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short sis5595_base = 0; +static struct pci_driver sis5595_driver; +static unsigned short sis5595_base; static u8 sis5595_read(u8 reg) { @@ -172,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) /* NB: We grab just the two SMBus registers here, but this may still * interfere with ACPI :-( */ - if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) { + if (!request_region(sis5595_base + SMB_INDEX, 2, + sis5595_driver.name)) { dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); return -ENODEV; @@ -364,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; @@ -397,6 +398,7 @@ static void __devexit sis5595_remove(struct pci_dev *dev) } static struct pci_driver sis5595_driver = { + .owner = THIS_MODULE, .name = "sis5595_smbus", .id_table = sis5595_ids, .probe = sis5595_probe, diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 86f0f448fa0..7f49e5fd3ff 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -92,6 +92,8 @@ #define SIS630_PCALL 0x04 #define SIS630_BLOCK_DATA 0x05 +static struct pci_driver sis630_driver; + /* insmod parameters */ static int high_clock; static int force; @@ -101,7 +103,7 @@ module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); /* acpi base address */ -static unsigned short acpi_base = 0; +static unsigned short acpi_base; /* supported chips */ static int supported[] = { @@ -432,7 +434,8 @@ static int sis630_setup(struct pci_dev *sis630_dev) dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) { + if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + sis630_driver.name)) { dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); goto exit; @@ -455,7 +458,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; @@ -494,6 +496,7 @@ static void __devexit sis630_remove(struct pci_dev *dev) static struct pci_driver sis630_driver = { + .owner = THIS_MODULE, .name = "sis630_smbus", .id_table = sis630_ids, .probe = sis630_probe, diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index ead2ff3cf60..6a134c09132 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -82,8 +82,9 @@ #define SIS96x_PROC_CALL 0x04 #define SIS96x_BLOCK_DATA 0x05 +static struct pci_driver sis96x_driver; static struct i2c_adapter sis96x_adapter; -static u16 sis96x_smbus_base = 0; +static u16 sis96x_smbus_base; static inline u8 sis96x_read(u8 reg) { @@ -257,7 +258,6 @@ static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id sis96x_ids[] = { @@ -294,7 +294,8 @@ static int __devinit sis96x_probe(struct pci_dev *dev, sis96x_smbus_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) { + if (!request_region(sis96x_smbus_base, SMB_IOSIZE, + sis96x_driver.name)) { dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x " "already in use!\n", sis96x_smbus_base, sis96x_smbus_base + SMB_IOSIZE - 1); @@ -328,6 +329,7 @@ static void __devexit sis96x_remove(struct pci_dev *dev) } static struct pci_driver sis96x_driver = { + .owner = THIS_MODULE, .name = "sis96x_smbus", .id_table = sis96x_ids, .probe = sis96x_probe, diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 040b8abeabb..544a38e6439 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -43,9 +43,9 @@ /* io-region reservation */ #define IOSPACE 0x06 -#define IOTEXT "via-i2c" -static u16 pm_io_base = 0; +static struct pci_driver vt586b_driver; +static u16 pm_io_base; /* It does not appear from the datasheet that the GPIO pins are @@ -130,7 +130,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i pci_read_config_word(dev, base, &pm_io_base); pm_io_base &= (0xff << 8); - if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) { + if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) { dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE); return -ENODEV; } @@ -159,6 +159,7 @@ static void __devexit vt586b_remove(struct pci_dev *dev) static struct pci_driver vt586b_driver = { + .owner = THIS_MODULE, .name = "vt586b_smbus", .id_table = vt586b_ids, .probe = vt586b_probe, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 99d209e0485..c9366b50483 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -1,9 +1,10 @@ /* i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com> + Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -21,15 +22,19 @@ */ /* - Supports Via devices: - 82C596A/B (0x3050) - 82C596B (0x3051) - 82C686A/B - 8231 - 8233 - 8233A (0x3147 and 0x3177) - 8235 - 8237 + Supports the following VIA south bridges: + + Chip name PCI ID REV I2C block + VT82C596A 0x3050 no + VT82C596B 0x3051 no + VT82C686A 0x3057 0x30 no + VT82C686B 0x3057 0x40 yes + VT8231 0x8235 no? + VT8233 0x3074 yes + VT8233A 0x3147 yes? + VT8235 0x3177 yes + VT8237R 0x3227 yes + Note: we assume there can only be one device, with one SMBus interface. */ @@ -38,7 +43,6 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/sched.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/init.h> @@ -46,48 +50,37 @@ static struct pci_dev *vt596_pdev; -#define SMBBA1 0x90 -#define SMBBA2 0x80 -#define SMBBA3 0xD0 +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 /* SMBus address offsets */ static unsigned short vt596_smba; #define SMBHSTSTS (vt596_smba + 0) -#define SMBHSLVSTS (vt596_smba + 1) #define SMBHSTCNT (vt596_smba + 2) #define SMBHSTCMD (vt596_smba + 3) #define SMBHSTADD (vt596_smba + 4) #define SMBHSTDAT0 (vt596_smba + 5) #define SMBHSTDAT1 (vt596_smba + 6) #define SMBBLKDAT (vt596_smba + 7) -#define SMBSLVCNT (vt596_smba + 8) -#define SMBSHDWCMD (vt596_smba + 9) -#define SMBSLVEVT (vt596_smba + 0xA) -#define SMBSLVDAT (vt596_smba + 0xC) /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, - We try to select the better one*/ - -static unsigned short smb_cf_hstcfg = 0xD2; + We try to select the better one */ -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +static unsigned short SMBHSTCFG = 0xD2; /* Other settings */ #define MAX_TIMEOUT 500 -#define ENABLE_INT9 0 /* VT82C596 constants */ -#define VT596_QUICK 0x00 -#define VT596_BYTE 0x04 -#define VT596_BYTE_DATA 0x08 -#define VT596_WORD_DATA 0x0C -#define VT596_BLOCK_DATA 0x14 +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 +#define VT596_I2C_BLOCK_DATA 0x34 /* If force is set to anything different from 0, we forcibly enable the @@ -105,40 +98,65 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); +static struct pci_driver vt596_driver; static struct i2c_adapter vt596_adapter; -/* Another internally used function */ -static int vt596_transaction(void) +#define FEATURE_I2CBLOCK (1<<0) +static unsigned int vt596_features; + +#ifdef DEBUG +static void vt596_dump_regs(const char *msg, u8 size) +{ + dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x " + "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + if (size == VT596_BLOCK_DATA + || size == VT596_I2C_BLOCK_DATA) { + int i; + + dev_dbg(&vt596_adapter.dev, "BLK="); + for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("\n"); + dev_dbg(&vt596_adapter.dev, " "); + for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("%02x\n", inb_p(SMBBLKDAT)); + } +} +#else +static inline void vt596_dump_regs(const char *msg, u8 size) { } +#endif + +/* Return -1 on error, 0 on success */ +static int vt596_transaction(u8 size) { int temp; int result = 0; int timeout = 0; - dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); + vt596_dump_regs("Transaction (pre)", size); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting...\n", temp); - + "Resetting... ", temp); + outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); - + printk("Failed! (0x%02x)\n", temp); return -1; } else { - dev_dbg(&vt596_adapter.dev, "Successfull!\n"); + printk("Successful!\n"); } } - /* start the transaction by setting bit 6 */ - outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + /* Start the transaction by setting bit 6 */ + outb_p(0x40 | (size & 0x3C), SMBHSTCNT); - /* We will always wait for a fraction of a second! - I don't know if VIA needs this, Intel did */ + /* We will always wait for a fraction of a second */ do { msleep(1); temp = inb_p(SMBHSTSTS); @@ -147,77 +165,61 @@ static int vt596_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { result = -1; - dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n"); + dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } if (temp & 0x10) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n"); + dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", + inb_p(SMBHSTCNT) & 0x3C); } if (temp & 0x08) { result = -1; - dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be " - "locked until next hard\nreset. (sorry!)\n"); - /* Clock stops and slave is stuck in mid-transmission */ + dev_err(&vt596_adapter.dev, "SMBus collision!\n"); } if (temp & 0x04) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: no response!\n"); + /* Quick commands are used to probe for chips, so + errors are expected, and we don't want to frighten the + user. */ + if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK) + dev_err(&vt596_adapter.dev, "Transaction error!\n"); } - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + /* Resetting status register */ + if (temp & 0x1F) outb_p(temp, SMBHSTSTS); - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_warn(&vt596_adapter.dev, "Failed reset at end " - "of transaction (%02x)\n", temp); - } - } - dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); - + vt596_dump_regs("Transaction (post)", size); + return result; } -/* Return -1 on error. */ +/* Return -1 on error, 0 on success */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, u8 command, - int size, union i2c_smbus_data *data) + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) { - int i, len; + int i; switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_info(&vt596_adapter.dev, - "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; case I2C_SMBUS_QUICK: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); size = VT596_QUICK; break; case I2C_SMBUS_BYTE: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = VT596_BYTE; break; case I2C_SMBUS_BYTE_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0); size = VT596_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0); @@ -225,28 +227,33 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } size = VT596_WORD_DATA; break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (!(vt596_features & FEATURE_I2CBLOCK)) + goto exit_unsupported; + if (read_write == I2C_SMBUS_READ) + outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); + /* Fall through */ case I2C_SMBUS_BLOCK_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { - len = data->block[0]; - if (len < 0) - len = 0; + u8 len = data->block[0]; if (len > I2C_SMBUS_BLOCK_MAX) len = I2C_SMBUS_BLOCK_MAX; outb_p(len, SMBHSTDAT0); - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } - size = VT596_BLOCK_DATA; + size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ? + VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA; break; + default: + goto exit_unsupported; } - outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); - if (vt596_transaction()) /* Error in transaction */ + if (vt596_transaction(size)) /* Error in transaction */ return -1; if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) @@ -254,35 +261,39 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, switch (size) { case VT596_BYTE: - /* Where is the result put? I assume here it is in - * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs - */ - data->byte = inb_p(SMBHSTDAT0); - break; case VT596_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0); break; case VT596_WORD_DATA: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; + case VT596_I2C_BLOCK_DATA: case VT596_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] > I2C_SMBUS_BLOCK_MAX) data->block[0] = I2C_SMBUS_BLOCK_MAX; - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; } return 0; + +exit_unsupported: + dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", + size); + return -1; } static u32 vt596_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; + + if (vt596_features & FEATURE_I2CBLOCK) + func |= I2C_FUNC_SMBUS_I2C_BLOCK; + return func; } static struct i2c_algorithm smbus_algorithm = { @@ -294,7 +305,6 @@ static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static int __devinit vt596_probe(struct pci_dev *pdev, @@ -302,7 +312,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, { unsigned char temp; int error = -ENODEV; - + /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -311,12 +321,12 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) || - !(vt596_smba & 0x1)) { + !(vt596_smba & 0x0001)) { /* try 2nd address and config reg. for 596 */ if (id->device == PCI_DEVICE_ID_VIA_82C596_3 && !pci_read_config_word(pdev, SMBBA2, &vt596_smba) && - (vt596_smba & 0x1)) { - smb_cf_hstcfg = 0x84; + (vt596_smba & 0x0001)) { + SMBHSTCFG = 0x84; } else { /* no matches at all */ dev_err(&pdev->dev, "Cannot configure " @@ -333,10 +343,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev, return -ENODEV; } - found: - if (!request_region(vt596_smba, 8, "viapro-smbus")) { +found: + if (!request_region(vt596_smba, 8, vt596_driver.name)) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", - vt596_smba); + vt596_smba); return -ENODEV; } @@ -348,16 +358,16 @@ static int __devinit vt596_probe(struct pci_dev *pdev, pci_write_config_word(pdev, id->driver_data, vt596_smba); pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " - "address 0x%04x!\n", vt596_smba); - } else if ((temp & 1) == 0) { + "address 0x%04x!\n", vt596_smba); + } else if (!(temp & 0x01)) { if (force) { - /* NOTE: This assumes I/O space and other allocations - * WERE done by the Bios! Don't complain if your - * hardware does weird things after enabling this. - * :') Check for Bios updates before resorting to + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to * this. */ - pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); + pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_info(&pdev->dev, "Enabling SMBus device\n"); } else { dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " @@ -367,22 +377,28 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } } - if ((temp & 0x0E) == 8) - dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n"); - else if ((temp & 0x0E) == 0) - dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n"); - else - dev_dbg(&pdev->dev, "Illegal Interrupt configuration " - "(or code out of date)!\n"); - - pci_read_config_byte(pdev, SMBREV, &temp); - dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_8237: + case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8233_0: + vt596_features |= FEATURE_I2CBLOCK; + break; + case PCI_DEVICE_ID_VIA_82C686_4: + /* The VT82C686B (rev 0x40) does support I2C block + transactions, but the VT82C686A (rev 0x30) doesn't */ + if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp) + && temp >= 0x40) + vt596_features |= FEATURE_I2CBLOCK; + break; + } + vt596_adapter.dev.parent = &pdev->dev; snprintf(vt596_adapter.name, I2C_NAME_SIZE, - "SMBus Via Pro adapter at %04x", vt596_smba); - + "SMBus Via Pro adapter at %04x", vt596_smba); + vt596_pdev = pci_dev_get(pdev); if (i2c_add_adapter(&vt596_adapter)) { pci_dev_put(vt596_pdev); @@ -395,7 +411,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, */ return -ENODEV; - release_region: +release_region: release_region(vt596_smba, 8); return error; } @@ -420,9 +436,10 @@ static struct pci_device_id vt596_ids[] = { { 0, } }; -MODULE_DEVICE_TABLE (pci, vt596_ids); +MODULE_DEVICE_TABLE(pci, vt596_ids); static struct pci_driver vt596_driver = { + .owner = THIS_MODULE, .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b675773b0cc..650c3ebde84 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -225,6 +225,7 @@ static void __devexit voodoo3_remove(struct pci_dev *dev) } static struct pci_driver voodoo3_driver = { + .owner = THIS_MODULE, .name = "voodoo3_smbus", .id_table = voodoo3_ids, .probe = voodoo3_probe, diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index a1d580e0536..d3478e08452 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -442,14 +442,13 @@ static int __init scx200_acb_create(int base, int index) int rc = 0; char description[64]; - iface = kmalloc(sizeof(*iface), GFP_KERNEL); + iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { printk(KERN_ERR NAME ": can't allocate memory\n"); rc = -ENOMEM; goto errout; } - memset(iface, 0, sizeof(*iface)); adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 6bd44a44cd2..f9fae28f561 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -126,4 +126,13 @@ config SENSORS_MAX6875 This driver can also be built as a module. If so, the module will be called max6875. +config RTC_X1205_I2C + tristate "Xicor X1205 RTC chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Xicor X1205 RTC chip. + + This driver can also be built as a module. If so, the module + will be called x1205. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index a876dd42b86..46178b57b1f 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o +obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 9d3175c0339..01b03700741 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -243,11 +243,10 @@ static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind) I2C_FUNC_I2C)) goto exit; - if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct ds1337_data)); INIT_LIST_HEAD(&data->list); /* The common I2C client data is placed right before the diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index 0936327a946..da488b735ab 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -167,7 +167,8 @@ static void ds1374_set_tlet(ulong arg) static ulong new_time; -DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time); +static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, + (ulong) & new_time); int ds1374_set_rtc_time(ulong nowtime) { @@ -193,13 +194,11 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) struct i2c_client *client; int rc; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!client) return -ENOMEM; - memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); - client->flags = I2C_DF_NOTIFY; client->addr = addr; client->adapter = adap; client->driver = &ds1374_driver; diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index d58403a4790..4baf573fa04 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -88,8 +88,8 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice) dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX) - if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX) + for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX) + if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX) goto exit; } else { if (i2c_smbus_write_byte(client, slice << 5)) { @@ -155,7 +155,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) +static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct eeprom_data *data; @@ -171,11 +171,10 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) | I2C_FUNC_SMBUS_BYTE)) goto exit; - if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct eeprom_data)); new_client = &data->client; memset(data->data, 0xff, EEPROM_SIZE); diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 8ee56d4b389..eaa4742e04f 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -888,6 +888,7 @@ static int otg_remove(struct device *dev) } struct device_driver omap_otg_driver = { + .owner = THIS_MODULE, .name = "omap_otg", .bus = &platform_bus_type, .probe = otg_probe, diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 3f14528a52a..3df309ae44a 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -174,13 +174,11 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind) struct i2c_client *client; int rc; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!client) return -ENOMEM; - memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE); - client->flags = I2C_DF_NOTIFY; client->addr = addr; client->adapter = adap; client->driver = &m41t00_driver; diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 9e1aeb69abf..b376a006883 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -179,16 +179,14 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) if (address & 1) return 0; - if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) + if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) return -ENOMEM; - memset(data, 0, sizeof(struct max6875_data)); /* A fake client is created on the odd address */ - if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) { + if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { err = -ENOMEM; goto exit_kfree1; } - memset(fake_client, 0, sizeof(struct i2c_client)); /* Init real i2c_client */ real_client = &data->client; diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c index 225577fdda4..59a93034622 100644 --- a/drivers/i2c/chips/pca9539.c +++ b/drivers/i2c/chips/pca9539.c @@ -122,11 +122,10 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pca9539_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 6525743ff9f..c323c2de236 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -115,7 +115,7 @@ static int pcf8574_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct pcf8574_data *data; @@ -127,11 +127,10 @@ int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pcf8574_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 80f1df9a450..ce420a67560 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -166,7 +166,7 @@ static int pcf8591_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct pcf8591_data *data; @@ -178,11 +178,10 @@ int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pcf8591_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c index 0b5385c892b..916cdc1af23 100644 --- a/drivers/i2c/chips/rtc8564.c +++ b/drivers/i2c/chips/rtc8564.c @@ -148,17 +148,16 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) {addr, I2C_M_RD, 2, data} }; - d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL); + d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL); if (!d) { ret = -ENOMEM; goto done; } - memset(d, 0, sizeof(struct rtc8564_data)); new_client = &d->client; strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); i2c_set_clientdata(new_client, d); - new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY; + new_client->flags = I2C_CLIENT_ALLOW_USE; new_client->addr = addr; new_client->adapter = adap; new_client->driver = &rtc8564_driver; diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 280e9638c0f..280dd7a45db 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -500,11 +500,10 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) return 0; } - tps = kmalloc(sizeof *tps, GFP_KERNEL); + tps = kzalloc(sizeof *tps, GFP_KERNEL); if (!tps) return 0; - memset(tps, 0, sizeof *tps); init_MUTEX(&tps->lock); INIT_WORK(&tps->work, tps65010_work, tps); tps->irq = -1; diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c new file mode 100644 index 00000000000..7da366cdc18 --- /dev/null +++ b/drivers/i2c/chips/x1205.c @@ -0,0 +1,698 @@ +/* + * x1205.c - An i2c driver for the Xicor X1205 RTC + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * please send all reports to: + * kas11 at tampabay dot rr dot com + * a dot zummo at towertech dot it + * + * based on the other drivers in this same directory. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/string.h> +#include <linux/bcd.h> +#include <linux/rtc.h> +#include <linux/list.h> + +#include <linux/x1205.h> + +#define DRV_VERSION "0.9.9" + +/* Addresses to scan: none. This chip is located at + * 0x6f and uses a two bytes register addressing. + * Two bytes need to be written to read a single register, + * while most other chips just require one and take the second + * one as the data to be written. To prevent corrupting + * unknown chips, the user must explicitely set the probe parameter. + */ + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD; +I2C_CLIENT_MODULE_PARM(hctosys, + "Set the system time from the hardware clock upon initialization"); + +/* offsets into CCR area */ + +#define CCR_SEC 0 +#define CCR_MIN 1 +#define CCR_HOUR 2 +#define CCR_MDAY 3 +#define CCR_MONTH 4 +#define CCR_YEAR 5 +#define CCR_WDAY 6 +#define CCR_Y2K 7 + +#define X1205_REG_SR 0x3F /* status register */ +#define X1205_REG_Y2K 0x37 +#define X1205_REG_DW 0x36 +#define X1205_REG_YR 0x35 +#define X1205_REG_MO 0x34 +#define X1205_REG_DT 0x33 +#define X1205_REG_HR 0x32 +#define X1205_REG_MN 0x31 +#define X1205_REG_SC 0x30 +#define X1205_REG_DTR 0x13 +#define X1205_REG_ATR 0x12 +#define X1205_REG_INT 0x11 +#define X1205_REG_0 0x10 +#define X1205_REG_Y2K1 0x0F +#define X1205_REG_DWA1 0x0E +#define X1205_REG_YRA1 0x0D +#define X1205_REG_MOA1 0x0C +#define X1205_REG_DTA1 0x0B +#define X1205_REG_HRA1 0x0A +#define X1205_REG_MNA1 0x09 +#define X1205_REG_SCA1 0x08 +#define X1205_REG_Y2K0 0x07 +#define X1205_REG_DWA0 0x06 +#define X1205_REG_YRA0 0x05 +#define X1205_REG_MOA0 0x04 +#define X1205_REG_DTA0 0x03 +#define X1205_REG_HRA0 0x02 +#define X1205_REG_MNA0 0x01 +#define X1205_REG_SCA0 0x00 + +#define X1205_CCR_BASE 0x30 /* Base address of CCR */ +#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ + +#define X1205_SR_RTCF 0x01 /* Clock failure */ +#define X1205_SR_WEL 0x02 /* Write Enable Latch */ +#define X1205_SR_RWEL 0x04 /* Register Write Enable */ + +#define X1205_DTR_DTR0 0x01 +#define X1205_DTR_DTR1 0x02 +#define X1205_DTR_DTR2 0x04 + +#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ + +/* Prototypes */ +static int x1205_attach(struct i2c_adapter *adapter); +static int x1205_detach(struct i2c_client *client); +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); +static int x1205_command(struct i2c_client *client, unsigned int cmd, + void *arg); + +static struct i2c_driver x1205_driver = { + .owner = THIS_MODULE, + .name = "x1205", + .flags = I2C_DF_NOTIFY, + .attach_adapter = &x1205_attach, + .detach_client = &x1205_detach, +}; + +struct x1205_data { + struct i2c_client client; + struct list_head list; + unsigned int epoch; +}; + +static const unsigned char days_in_mo[] = + { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + +static LIST_HEAD(x1205_clients); + +/* Workaround until the I2C subsytem will allow to send + * commands to a specific client. This function will send the command + * to the first client. + */ +int x1205_do_command(unsigned int cmd, void *arg) +{ + struct list_head *walk; + struct list_head *tmp; + struct x1205_data *data; + + list_for_each_safe(walk, tmp, &x1205_clients) { + data = list_entry(walk, struct x1205_data, list); + return x1205_command(&data->client, cmd, arg); + } + + return -ENODEV; +} + +#define is_leap(year) \ + ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) + +/* make sure the rtc_time values are in bounds */ +static int x1205_validate_tm(struct rtc_time *tm) +{ + int year = tm->tm_year + 1900; + + if ((tm->tm_year < 70) || (tm->tm_year > 255)) + return -EINVAL; + + if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) + return -EINVAL; + + if (tm->tm_mday > days_in_mo[tm->tm_mon] + + ((tm->tm_mon == 1) && is_leap(year))) + return -EINVAL; + + if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) + return -EINVAL; + + return 0; +} + +/* + * In the routines that deal directly with the x1205 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch + * Epoch is initialized as 2000. Time is set to UTC. + */ +static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, + u8 reg_base) +{ + unsigned char dt_addr[2] = { 0, reg_base }; + static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; + + unsigned char buf[8], sr; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, sr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &sr }, /* read status */ + { client->addr, 0, 2, dt_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 8, buf }, /* read date */ + }; + + struct x1205_data *data = i2c_get_clientdata(client); + + /* read status register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + /* check for battery failure */ + if (sr & X1205_SR_RTCF) { + dev_warn(&client->dev, + "Clock had a power failure, you must set the date.\n"); + return -EINVAL; + } + + /* read date registers */ + if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, + "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " + "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", + __FUNCTION__, + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); + + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); + tm->tm_min = BCD2BIN(buf[CCR_MIN]); + tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ + tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); + tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); + data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; + tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; + tm->tm_wday = buf[CCR_WDAY]; + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, + int datetoo, u8 reg_base) +{ + int i, err, xfer; + + unsigned char buf[8]; + + static const unsigned char wel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL }; + + static const unsigned char rwel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL | X1205_SR_RWEL }; + + static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; + + struct x1205_data *data = i2c_get_clientdata(client); + + /* check if all values in the tm struct are correct */ + if ((err = x1205_validate_tm(tm)) < 0) + return err; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + buf[CCR_SEC] = BIN2BCD(tm->tm_sec); + buf[CCR_MIN] = BIN2BCD(tm->tm_min); + + /* set hour and 24hr bit */ + buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + + /* should we also set the date? */ + if (datetoo) { + buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + + /* month, 0 - 11 */ + buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); + + /* year, since 1900 */ + buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); + buf[CCR_WDAY] = tm->tm_wday & 0x07; + buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); + } + + /* this sequence is required to unlock the chip */ + xfer = i2c_master_send(client, wel, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + xfer = i2c_master_send(client, rwel, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + /* write register's data */ + for (i = 0; i < (datetoo ? 8 : 3); i++) { + unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + + xfer = i2c_master_send(client, rdata, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: xfer=%d addr=%02x, data=%02x\n", + __FUNCTION__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + }; + + /* disable further writes */ + xfer = i2c_master_send(client, diswe, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + return 0; +} + +static int x1205_get_dtrim(struct i2c_client *client, int *trim) +{ + unsigned char dtr; + static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ + }; + + /* read dtr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); + + *trim = 0; + + if (dtr & X1205_DTR_DTR0) + *trim += 20; + + if (dtr & X1205_DTR_DTR1) + *trim += 10; + + if (dtr & X1205_DTR_DTR2) + *trim = -*trim; + + return 0; +} + +static int x1205_get_atrim(struct i2c_client *client, int *trim) +{ + s8 atr; + static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, atr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ + }; + + /* read atr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); + + /* atr is a two's complement value on 6 bits, + * perform sign extension. The formula is + * Catr = (atr * 0.25pF) + 11.00pF. + */ + if (atr & 0x20) + atr |= 0xC0; + + dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); + + *trim = (atr * 250) + 11000; + + dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); + + return 0; +} + +static int x1205_hctosys(struct i2c_client *client) +{ + int err; + + struct rtc_time tm; + struct timespec tv; + + err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); + + if (err) { + dev_err(&client->dev, + "Unable to set the system clock\n"); + return err; + } + + /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary + * whether it stores the most close value or the value with partial + * seconds truncated. However, it is important that we use it to store + * the truncated value. This is because otherwise it is necessary, + * in an rtc sync function, to read both xtime.tv_sec and + * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read + * of >32bits is not possible. So storing the most close value would + * slow down the sync API. So here we have the truncated value and + * the best guess is to add 0.5s. + */ + + tv.tv_nsec = NSEC_PER_SEC >> 1; + + /* WARNING: this is not the C library 'mktime' call, it is a built in + * inline function from include/linux/time.h. It expects (requires) + * the month to be in the range 1-12 + */ + + tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, + tm.tm_min, tm.tm_sec); + + do_settimeofday(&tv); + + dev_info(&client->dev, + "setting the system clock to %d-%d-%d %d:%d:%d\n", + tm.tm_year + 1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, tm.tm_min, + tm.tm_sec); + + return 0; +} + +struct x1205_limit +{ + unsigned char reg; + unsigned char mask; + unsigned char min; + unsigned char max; +}; + +static int x1205_validate_client(struct i2c_client *client) +{ + int i, xfer; + + /* Probe array. We will read the register at the specified + * address and check if the given bits are zero. + */ + static const unsigned char probe_zero_pattern[] = { + /* register, mask */ + X1205_REG_SR, 0x18, + X1205_REG_DTR, 0xF8, + X1205_REG_ATR, 0xC0, + X1205_REG_INT, 0x18, + X1205_REG_0, 0xFF, + }; + + static const struct x1205_limit probe_limits_pattern[] = { + /* register, mask, min, max */ + { X1205_REG_Y2K, 0xFF, 19, 20 }, + { X1205_REG_DW, 0xFF, 0, 6 }, + { X1205_REG_YR, 0xFF, 0, 99 }, + { X1205_REG_MO, 0xFF, 0, 12 }, + { X1205_REG_DT, 0xFF, 0, 31 }, + { X1205_REG_HR, 0x7F, 0, 23 }, + { X1205_REG_MN, 0xFF, 0, 59 }, + { X1205_REG_SC, 0xFF, 0, 59 }, + { X1205_REG_Y2K1, 0xFF, 19, 20 }, + { X1205_REG_Y2K0, 0xFF, 19, 20 }, + }; + + /* check that registers have bits a 0 where expected */ + for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { + unsigned char buf; + + unsigned char addr[2] = { 0, probe_zero_pattern[i] }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, &buf }, + }; + + xfer = i2c_transfer(client->adapter, msgs, 2); + if (xfer != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + + if ((buf & probe_zero_pattern[i+1]) != 0) { + dev_err(&client->adapter->dev, + "%s: register=%02x, zero pattern=%d, value=%x\n", + __FUNCTION__, addr[1], i, buf); + + return -ENODEV; + } + } + + /* check limits (only registers with bcd values) */ + for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { + unsigned char reg, value; + + unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, ® }, + }; + + xfer = i2c_transfer(client->adapter, msgs, 2); + + if (xfer != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + + value = BCD2BIN(reg & probe_limits_pattern[i].mask); + + if (value > probe_limits_pattern[i].max || + value < probe_limits_pattern[i].min) { + dev_dbg(&client->adapter->dev, + "%s: register=%x, lim pattern=%d, value=%d\n", + __FUNCTION__, addr[1], i, value); + + return -ENODEV; + } + } + + return 0; +} + +static int x1205_attach(struct i2c_adapter *adapter) +{ + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + return i2c_probe(adapter, &addr_data, x1205_probe); +} + +int x1205_direct_attach(int adapter_id, + struct i2c_client_address_data *address_data) +{ + int err; + struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); + + if (adapter) { + err = i2c_probe(adapter, + address_data, x1205_probe); + + i2c_put_adapter(adapter); + + return err; + } + + return -ENODEV; +} + +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct x1205_data *data; + + int err = 0; + + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + err = -ENODEV; + goto exit; + } + + if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + /* Initialize our structures */ + data->epoch = 2000; + + client = &data->client; + client->addr = address; + client->driver = &x1205_driver; + client->adapter = adapter; + + strlcpy(client->name, "x1205", I2C_NAME_SIZE); + + i2c_set_clientdata(client, data); + + /* Verify the chip is really an X1205 */ + if (kind < 0) { + if (x1205_validate_client(client) < 0) { + err = -ENODEV; + goto exit_kfree; + } + } + + /* Inform the i2c layer */ + if ((err = i2c_attach_client(client))) + goto exit_kfree; + + list_add(&data->list, &x1205_clients); + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + /* If requested, set the system time */ + if (hctosys) + x1205_hctosys(client); + + return 0; + +exit_kfree: + kfree(data); + +exit: + return err; +} + +static int x1205_detach(struct i2c_client *client) +{ + int err; + struct x1205_data *data = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __FUNCTION__); + + if ((err = i2c_detach_client(client))) + return err; + + list_del(&data->list); + + kfree(data); + + return 0; +} + +static int x1205_command(struct i2c_client *client, unsigned int cmd, + void *param) +{ + if (param == NULL) + return -EINVAL; + + if (!capable(CAP_SYS_TIME)) + return -EACCES; + + dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); + + switch (cmd) { + case X1205_CMD_GETDATETIME: + return x1205_get_datetime(client, param, X1205_CCR_BASE); + + case X1205_CMD_SETTIME: + return x1205_set_datetime(client, param, 0, + X1205_CCR_BASE); + + case X1205_CMD_SETDATETIME: + return x1205_set_datetime(client, param, 1, + X1205_CCR_BASE); + + case X1205_CMD_GETALARM: + return x1205_get_datetime(client, param, X1205_ALM0_BASE); + + case X1205_CMD_SETALARM: + return x1205_set_datetime(client, param, 1, + X1205_ALM0_BASE); + + case X1205_CMD_GETDTRIM: + return x1205_get_dtrim(client, param); + + case X1205_CMD_GETATRIM: + return x1205_get_atrim(client, param); + + default: + return -EINVAL; + } +} + +static int __init x1205_init(void) +{ + return i2c_add_driver(&x1205_driver); +} + +static void __exit x1205_exit(void) +{ + i2c_del_driver(&x1205_driver); +} + +MODULE_AUTHOR( + "Karen Spearel <kas11@tampabay.rr.com>, " + "Alessandro Zummo <a.zummo@towertech.it>"); +MODULE_DESCRIPTION("Xicor X1205 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +EXPORT_SYMBOL_GPL(x1205_do_command); +EXPORT_SYMBOL_GPL(x1205_direct_attach); + +module_init(x1205_init); +module_exit(x1205_exit); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index dda472e5e8b..02e335a04f0 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -19,7 +19,8 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>. All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl> - SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> */ + SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and + Jean Delvare <khali@linux-fr.org> */ #include <linux/module.h> #include <linux/kernel.h> @@ -48,7 +49,7 @@ static int i2c_bus_suspend(struct device * dev, pm_message_t state) int rc = 0; if (dev->driver && dev->driver->suspend) - rc = dev->driver->suspend(dev,state,0); + rc = dev->driver->suspend(dev, state); return rc; } @@ -57,7 +58,7 @@ static int i2c_bus_resume(struct device * dev) int rc = 0; if (dev->driver && dev->driver->resume) - rc = dev->driver->resume(dev,0); + rc = dev->driver->resume(dev); return rc; } @@ -85,6 +86,7 @@ void i2c_adapter_dev_release(struct device *dev) } struct device_driver i2c_adapter_driver = { + .owner = THIS_MODULE, .name = "i2c_adapter", .bus = &i2c_bus_type, .probe = i2c_device_probe, @@ -98,6 +100,7 @@ static void i2c_adapter_class_dev_release(struct class_device *dev) } struct class i2c_adapter_class = { + .owner = THIS_MODULE, .name = "i2c-adapter", .release = &i2c_adapter_class_dev_release, }; @@ -291,6 +294,7 @@ int i2c_add_driver(struct i2c_driver *driver) down(&core_lists); /* add the driver to the list of i2c drivers in the driver core */ + driver->driver.owner = driver->owner; driver->driver.name = driver->name; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_device_probe; @@ -706,10 +710,6 @@ int i2c_probe(struct i2c_adapter *adapter, int i, err; int adap_id = i2c_adapter_id(adapter); - /* Forget it if we can't probe using SMBUS_QUICK */ - if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK)) - return -1; - /* Force entries are done first, and are not affected by ignore entries */ if (address_data->forces) { @@ -736,6 +736,17 @@ int i2c_probe(struct i2c_adapter *adapter, } } + /* Stop here if we can't use SMBUS_QUICK */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { + if (address_data->probe[0] == I2C_CLIENT_END + && address_data->normal_i2c[0] == I2C_CLIENT_END) + return 0; + + dev_warn(&adapter->dev, "SMBus Quick command not supported, " + "can't probe for chips\n"); + return -1; + } + /* Probe entries are done second, and are not affected by ignore entries either */ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { @@ -820,101 +831,44 @@ crc8(u16 data) return (u8)(data >> 8); } -/* CRC over count bytes in the first array plus the bytes in the rest - array if it is non-null. rest[0] is the (length of rest) - 1 - and is included. */ -static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest) +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) { int i; for(i = 0; i < count; i++) - crc = crc8((crc ^ first[i]) << 8); - if(rest != NULL) - for(i = 0; i <= rest[0]; i++) - crc = crc8((crc ^ rest[i]) << 8); + crc = crc8((crc ^ p[i]) << 8); return crc; } -static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest) +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) { - return i2c_smbus_partial_pec(0, count, first, rest); + /* The address will be sent first */ + u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); } -/* Returns new "size" (transaction type) - Note that we convert byte to byte_data and byte_data to word_data - rather than invent new xxx_PEC transactions. */ -static int i2c_smbus_add_pec(u16 addr, u8 command, int size, - union i2c_smbus_data *data) +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) { - u8 buf[3]; - - buf[0] = addr << 1; - buf[1] = command; - switch(size) { - case I2C_SMBUS_BYTE: - data->byte = i2c_smbus_pec(2, buf, NULL); - size = I2C_SMBUS_BYTE_DATA; - break; - case I2C_SMBUS_BYTE_DATA: - buf[2] = data->byte; - data->word = buf[2] || - (i2c_smbus_pec(3, buf, NULL) << 8); - size = I2C_SMBUS_WORD_DATA; - break; - case I2C_SMBUS_WORD_DATA: - /* unsupported */ - break; - case I2C_SMBUS_BLOCK_DATA: - data->block[data->block[0] + 1] = - i2c_smbus_pec(2, buf, data->block); - size = I2C_SMBUS_BLOCK_DATA_PEC; - break; - } - return size; + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; } -static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial, - union i2c_smbus_data *data) +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) { - u8 buf[3], rpec, cpec; + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); - buf[1] = command; - switch(size) { - case I2C_SMBUS_BYTE_DATA: - buf[0] = (addr << 1) | 1; - cpec = i2c_smbus_pec(2, buf, NULL); - rpec = data->byte; - break; - case I2C_SMBUS_WORD_DATA: - buf[0] = (addr << 1) | 1; - buf[2] = data->word & 0xff; - cpec = i2c_smbus_pec(3, buf, NULL); - rpec = data->word >> 8; - break; - case I2C_SMBUS_WORD_DATA_PEC: - /* unsupported */ - cpec = rpec = 0; - break; - case I2C_SMBUS_PROC_CALL_PEC: - /* unsupported */ - cpec = rpec = 0; - break; - case I2C_SMBUS_BLOCK_DATA_PEC: - buf[0] = (addr << 1); - buf[2] = (addr << 1) | 1; - cpec = i2c_smbus_pec(3, buf, data->block); - rpec = data->block[data->block[0] + 1]; - break; - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - buf[0] = (addr << 1) | 1; - rpec = i2c_smbus_partial_pec(partial, 1, - buf, data->block); - cpec = data->block[data->block[0] + 1]; - break; - default: - cpec = rpec = 0; - break; - } if (rpec != cpec) { pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n", rpec, cpec); @@ -941,9 +895,8 @@ s32 i2c_smbus_read_byte(struct i2c_client *client) s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value) { - union i2c_smbus_data data; /* only for PEC */ return i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data); + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); } s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) @@ -1026,13 +979,14 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, need to use only one message; when reading, we need two. We initialize most things with sane defaults, to keep the code below somewhat simpler. */ - unsigned char msgbuf0[34]; - unsigned char msgbuf1[34]; + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; int num = read_write == I2C_SMBUS_READ?2:1; struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, { addr, flags | I2C_M_RD, 0, msgbuf1 } }; int i; + u8 partial_pec = 0; msgbuf0[0] = command; switch(size) { @@ -1075,7 +1029,6 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, msgbuf0[2] = (data->word >> 8) & 0xff; break; case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_DATA_PEC: if (read_write == I2C_SMBUS_READ) { dev_err(&adapter->dev, "Block read not supported " "under I2C emulation!\n"); @@ -1088,23 +1041,20 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, data->block[0]); return -1; } - if(size == I2C_SMBUS_BLOCK_DATA_PEC) - (msg[0].len)++; - for (i = 1; i <= msg[0].len; i++) + for (i = 1; i < msg[0].len; i++) msgbuf0[i] = data->block[i-1]; } break; case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: dev_dbg(&adapter->dev, "Block process call not supported " "under I2C emulation!\n"); return -1; case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { - msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX; + msg[1].len = I2C_SMBUS_BLOCK_MAX; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) { + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with " "invalid block write size (%d)\n", data->block[0]); @@ -1120,9 +1070,30 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, return -1; } + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + if (i2c_transfer(adapter, msg, num) < 0) return -1; + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0) + return -1; + } + if (read_write == I2C_SMBUS_READ) switch(size) { case I2C_SMBUS_BYTE: @@ -1137,8 +1108,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: /* fixed at 32 for now */ - data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX; - for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) data->block[i+1] = msgbuf1[i]; break; } @@ -1151,28 +1122,8 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, union i2c_smbus_data * data) { s32 res; - int swpec = 0; - u8 partial = 0; flags &= I2C_M_TEN | I2C_CLIENT_PEC; - if((flags & I2C_CLIENT_PEC) && - !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) { - swpec = 1; - if(read_write == I2C_SMBUS_READ && - size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; - else if(size == I2C_SMBUS_PROC_CALL) - size = I2C_SMBUS_PROC_CALL_PEC; - else if(size == I2C_SMBUS_BLOCK_PROC_CALL) { - i2c_smbus_add_pec(addr, command, - I2C_SMBUS_BLOCK_DATA, data); - partial = data->block[data->block[0] + 1]; - size = I2C_SMBUS_BLOCK_PROC_CALL_PEC; - } else if(read_write == I2C_SMBUS_WRITE && - size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - size = i2c_smbus_add_pec(addr, command, size, data); - } if (adapter->algo->smbus_xfer) { down(&adapter->bus_lock); @@ -1183,13 +1134,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write, command,size,data); - if(res >= 0 && swpec && - size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA && - (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC || - size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) { - if(i2c_smbus_check_pec(addr, command, size, partial, data)) - return -1; - } return res; } diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index aa7a4fadef6..ea14c8f1c82 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -26,15 +26,11 @@ /* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */ -/* The devfs code is contributed by Philipp Matthias Hahn - <pmhahn@titan.lahn.de> */ - #include <linux/kernel.h> #include <linux/module.h> #include <linux/fs.h> #include <linux/slab.h> #include <linux/smp_lock.h> -#include <linux/devfs_fs_kernel.h> #include <linux/init.h> #include <linux/i2c.h> #include <linux/i2c-dev.h> @@ -80,10 +76,9 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap) { struct i2c_dev *i2c_dev; - i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL); + i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL); if (!i2c_dev) return ERR_PTR(-ENOMEM); - memset(i2c_dev, 0x00, sizeof(*i2c_dev)); spin_lock(&i2c_dev_array_lock); if (i2c_dev_array[adap->nr]) { @@ -177,8 +172,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, int i,datasize,res; unsigned long funcs; - dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n", - iminor(inode),cmd, arg); + dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n", + cmd, arg); switch ( cmd ) { case I2C_SLAVE: @@ -432,8 +427,6 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) if (IS_ERR(i2c_dev)) return PTR_ERR(i2c_dev); - devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor), - S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor); pr_debug("i2c-dev: adapter [%s] registered as minor %d\n", adap->name, i2c_dev->minor); @@ -466,7 +459,6 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) return -ENODEV; init_completion(&i2c_dev->released); - devfs_remove("i2c/%d", i2c_dev->minor); return_i2c_dev(i2c_dev); class_device_unregister(&i2c_dev->class_dev); wait_for_completion(&i2c_dev->released); @@ -522,8 +514,6 @@ static int __init i2c_dev_init(void) if (res) goto out_unreg_class; - devfs_mk_dir("i2c"); - return 0; out_unreg_class: @@ -539,7 +529,6 @@ static void __exit i2c_dev_exit(void) { i2c_del_driver(&i2cdev_driver); class_unregister(&i2c_dev_class); - devfs_remove("i2c"); unregister_chrdev(I2C_MAJOR,"i2c"); } |