diff options
Diffstat (limited to 'drivers/i2c/chips/ds1682.c')
| -rw-r--r-- | drivers/i2c/chips/ds1682.c | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c deleted file mode 100644 index f3ee4a1abb7..00000000000 --- a/drivers/i2c/chips/ds1682.c +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver - * - * Written by: Grant Likely <grant.likely@secretlab.ca> - * - * Copyright (C) 2007 Secret Lab Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * The DS1682 elapsed timer recorder is a simple device that implements - * one elapsed time counter, one event counter, an alarm signal and 10 - * bytes of general purpose EEPROM. - * - * This driver provides access to the DS1682 counters and user data via - * the sysfs. The following attributes are added to the device node: - * elapsed_time (u32): Total elapsed event time in ms resolution - * alarm_time (u32): When elapsed time exceeds the value in alarm_time, - * then the alarm pin is asserted. - * event_count (u16): number of times the event pin has gone low. - * eeprom (u8[10]): general purpose EEPROM - * - * Counter registers and user data are both read/write unless the device - * has been write protected. This driver does not support turning off write - * protection. Once write protection is turned on, it is impossible to - * turn it off again, so I have left the feature out of this driver to avoid - * accidental enabling, but it is trivial to add write protect support. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/string.h> -#include <linux/list.h> -#include <linux/sysfs.h> -#include <linux/ctype.h> -#include <linux/hwmon-sysfs.h> - -/* Device registers */ -#define DS1682_REG_CONFIG 0x00 -#define DS1682_REG_ALARM 0x01 -#define DS1682_REG_ELAPSED 0x05 -#define DS1682_REG_EVT_CNTR 0x09 -#define DS1682_REG_EEPROM 0x0b -#define DS1682_REG_RESET 0x1d -#define DS1682_REG_WRITE_DISABLE 0x1e -#define DS1682_REG_WRITE_MEM_DISABLE 0x1f - -#define DS1682_EEPROM_SIZE 10 - -/* - * Generic counter attributes - */ -static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); - struct i2c_client *client = to_i2c_client(dev); - __le32 val = 0; - int rc; - - dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name); - - /* Read the register */ - rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr, - (u8 *) & val); - if (rc < 0) - return -EIO; - - /* Special case: the 32 bit regs are time values with 1/4s - * resolution, scale them up to milliseconds */ - if (sattr->nr == 4) - return sprintf(buf, "%llu\n", - ((unsigned long long)le32_to_cpu(val)) * 250); - - /* Format the output string and return # of bytes */ - return sprintf(buf, "%li\n", (long)le32_to_cpu(val)); -} - -static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); - struct i2c_client *client = to_i2c_client(dev); - char *endp; - u64 val; - __le32 val_le; - int rc; - - dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name); - - /* Decode input */ - val = simple_strtoull(buf, &endp, 0); - if (buf == endp) { - dev_dbg(dev, "input string not a number\n"); - return -EINVAL; - } - - /* Special case: the 32 bit regs are time values with 1/4s - * resolution, scale input down to quarter-seconds */ - if (sattr->nr == 4) - do_div(val, 250); - - /* write out the value */ - val_le = cpu_to_le32(val); - rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr, - (u8 *) & val_le); - if (rc < 0) { - dev_err(dev, "register write failed; reg=0x%x, size=%i\n", - sattr->index, sattr->nr); - return -EIO; - } - - return count; -} - -/* - * Simple register attributes - */ -static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show, - ds1682_store, 4, DS1682_REG_ELAPSED); -static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, - ds1682_store, 4, DS1682_REG_ALARM); -static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, - ds1682_store, 2, DS1682_REG_EVT_CNTR); - -static const struct attribute_group ds1682_group = { - .attrs = (struct attribute *[]) { - &sensor_dev_attr_elapsed_time.dev_attr.attr, - &sensor_dev_attr_alarm_time.dev_attr.attr, - &sensor_dev_attr_event_count.dev_attr.attr, - NULL, - }, -}; - -/* - * User data attribute - */ -static ssize_t ds1682_eeprom_read(struct kobject *kobj, struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct i2c_client *client = kobj_to_i2c_client(kobj); - int rc; - - dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n", - buf, off, count); - - if (off >= DS1682_EEPROM_SIZE) - return 0; - - if (off + count > DS1682_EEPROM_SIZE) - count = DS1682_EEPROM_SIZE - off; - - rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off, - count, buf); - if (rc < 0) - return -EIO; - - return count; -} - -static ssize_t ds1682_eeprom_write(struct kobject *kobj, struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct i2c_client *client = kobj_to_i2c_client(kobj); - - dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n", - buf, off, count); - - if (off >= DS1682_EEPROM_SIZE) - return -ENOSPC; - - if (off + count > DS1682_EEPROM_SIZE) - count = DS1682_EEPROM_SIZE - off; - - /* Write out to the device */ - if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off, - count, buf) < 0) - return -EIO; - - return count; -} - -static struct bin_attribute ds1682_eeprom_attr = { - .attr = { - .name = "eeprom", - .mode = S_IRUGO | S_IWUSR, - }, - .size = DS1682_EEPROM_SIZE, - .read = ds1682_eeprom_read, - .write = ds1682_eeprom_write, -}; - -/* - * Called when a ds1682 device is matched with this driver - */ -static int ds1682_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int rc; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_I2C_BLOCK)) { - dev_err(&client->dev, "i2c bus does not support the ds1682\n"); - rc = -ENODEV; - goto exit; - } - - rc = sysfs_create_group(&client->dev.kobj, &ds1682_group); - if (rc) - goto exit; - - rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); - if (rc) - goto exit_bin_attr; - - return 0; - - exit_bin_attr: - sysfs_remove_group(&client->dev.kobj, &ds1682_group); - exit: - return rc; -} - -static int ds1682_remove(struct i2c_client *client) -{ - sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); - sysfs_remove_group(&client->dev.kobj, &ds1682_group); - return 0; -} - -static const struct i2c_device_id ds1682_id[] = { - { "ds1682", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ds1682_id); - -static struct i2c_driver ds1682_driver = { - .driver = { - .name = "ds1682", - }, - .probe = ds1682_probe, - .remove = ds1682_remove, - .id_table = ds1682_id, -}; - -static int __init ds1682_init(void) -{ - return i2c_add_driver(&ds1682_driver); -} - -static void __exit ds1682_exit(void) -{ - i2c_del_driver(&ds1682_driver); -} - -MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); -MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver"); -MODULE_LICENSE("GPL"); - -module_init(ds1682_init); -module_exit(ds1682_exit); |