diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-parport-light.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-parport-light.c | 98 |
1 files changed, 57 insertions, 41 deletions
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index c6faf9bdad1..62f55fe624c 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -1,14 +1,14 @@ /* ------------------------------------------------------------------------ * * i2c-parport-light.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org> - + Copyright (C) 2003-2010 Jean Delvare <jdelvare@suse.de> + Based on older i2c-velleman.c driver Copyright (C) 1995-2000 Simon G. Vogl With some changes from: Frodo Looijaard <frodol@dds.nl> Kyösti Mälkki <kmalkki@cc.hut.fi> - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -27,11 +27,13 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> -#include <asm/io.h> +#include <linux/i2c-smbus.h> +#include <linux/io.h> #include "i2c-parport.h" #define DEFAULT_BASE 0x378 @@ -43,6 +45,10 @@ static u16 base; module_param(base, ushort, 0); MODULE_PARM_DESC(base, "Base I/O address"); +static int irq; +module_param(irq, int, 0); +MODULE_PARM_DESC(irq, "IRQ (optional)"); + /* ----- Low-level parallel port access ----------------------------------- */ static inline void port_write(unsigned char p, unsigned char d) @@ -108,59 +114,74 @@ static struct i2c_algo_bit_data parport_algo_data = { .getscl = parport_getscl, .udelay = 50, .timeout = HZ, -}; +}; /* ----- Driver registration ---------------------------------------------- */ static struct i2c_adapter parport_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .id = I2C_HW_B_LP, .algo_data = &parport_algo_data, .name = "Parallel port adapter (light)", }; -static int __devinit i2c_parport_probe(struct platform_device *pdev) +/* SMBus alert support */ +static struct i2c_smbus_alert_setup alert_data = { + .alert_edge_triggered = 1, +}; +static struct i2c_client *ara; +static struct lineop parport_ctrl_irq = { + .val = (1 << 4), + .port = PORT_CTRL, +}; + +static int i2c_parport_probe(struct platform_device *pdev) { int err; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) - return -EBUSY; /* Reset hardware to a sane state (SCL and SDA high) */ parport_setsda(NULL, 1); parport_setscl(NULL, 1); /* Other init if needed (power on...) */ - if (adapter_parm[type].init.val) + if (adapter_parm[type].init.val) { line_set(1, &adapter_parm[type].init); + /* Give powered devices some time to settle */ + msleep(100); + } parport_adapter.dev.parent = &pdev->dev; err = i2c_bit_add_bus(&parport_adapter); if (err) { dev_err(&pdev->dev, "Unable to register with I2C\n"); - goto exit_region; + return err; } - return 0; -exit_region: - release_region(res->start, res->end - res->start + 1); - return err; + /* Setup SMBus alert if supported */ + if (adapter_parm[type].smbus_alert && irq) { + alert_data.irq = irq; + ara = i2c_setup_smbus_alert(&parport_adapter, &alert_data); + if (ara) + line_set(1, &parport_ctrl_irq); + else + dev_warn(&pdev->dev, "Failed to register ARA client\n"); + } + + return 0; } -static int __devexit i2c_parport_remove(struct platform_device *pdev) +static int i2c_parport_remove(struct platform_device *pdev) { - struct resource *res; - + if (ara) { + line_set(0, &parport_ctrl_irq); + i2c_unregister_device(ara); + ara = NULL; + } i2c_del_adapter(&parport_adapter); /* Un-init if needed (power off...) */ if (adapter_parm[type].init.val) line_set(0, &adapter_parm[type].init); - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, res->end - res->start + 1); return 0; } @@ -170,17 +191,11 @@ static struct platform_driver i2c_parport_driver = { .name = DRVNAME, }, .probe = i2c_parport_probe, - .remove = __devexit_p(i2c_parport_remove), + .remove = i2c_parport_remove, }; static int __init i2c_parport_device_add(u16 address) { - struct resource res = { - .start = address, - .end = address + 2, - .name = DRVNAME, - .flags = IORESOURCE_IO, - }; int err; pdev = platform_device_alloc(DRVNAME, -1); @@ -190,13 +205,6 @@ static int __init i2c_parport_device_add(u16 address) goto exit; } - err = platform_device_add_resources(pdev, &res, 1); - if (err) { - printk(KERN_ERR DRVNAME ": Device resource addition failed " - "(%d)\n", err); - goto exit_device_put; - } - err = platform_device_add(pdev); if (err) { printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", @@ -231,13 +239,19 @@ static int __init i2c_parport_init(void) base = DEFAULT_BASE; } - if (!adapter_parm[type].getscl.val) + if (!request_region(base, 3, DRVNAME)) + return -EBUSY; + + if (irq != 0) + pr_info(DRVNAME ": using irq %d\n", irq); + + if (!adapter_parm[type].getscl.val) parport_algo_data.getscl = NULL; /* Sets global pdev as a side effect */ err = i2c_parport_device_add(base); if (err) - goto exit; + goto exit_release; err = platform_driver_register(&i2c_parport_driver); if (err) @@ -247,7 +261,8 @@ static int __init i2c_parport_init(void) exit_device: platform_device_unregister(pdev); -exit: +exit_release: + release_region(base, 3); return err; } @@ -255,9 +270,10 @@ static void __exit i2c_parport_exit(void) { platform_driver_unregister(&i2c_parport_driver); platform_device_unregister(pdev); + release_region(base, 3); } -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_DESCRIPTION("I2C bus over parallel port (light)"); MODULE_LICENSE("GPL"); |