aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-ibm_iic.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-ibm_iic.c')
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c819
1 files changed, 819 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
new file mode 100644
index 00000000000..bb885215c08
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -0,0 +1,819 @@
+/*
+ * drivers/i2c/i2c-ibm_iic.c
+ *
+ * Support for the IIC peripheral on IBM PPC 4xx
+ *
+ * Copyright (c) 2003, 2004 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Ian DaSilva <idasilva@mvista.com>
+ * Armin Kuster <akuster@mvista.com>
+ * Matt Porter <mporter@mvista.com>
+ *
+ * Copyright 2000-2003 MontaVista Software Inc.
+ *
+ * Original driver version was highly leveraged from i2c-elektor.c
+ *
+ * Copyright 1995-97 Simon G. Vogl
+ * 1998-99 Hans Berglund
+ *
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
+ * and even Frodo Looijaard <frodol@dds.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <asm/ocp.h>
+#include <asm/ibm4xx.h>
+
+#include "i2c-ibm_iic.h"
+
+#define DRIVER_VERSION "2.1"
+
+MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static int iic_force_poll;
+module_param(iic_force_poll, bool, 0);
+MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
+
+static int iic_force_fast;
+module_param(iic_force_fast, bool, 0);
+MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
+
+#define DBG_LEVEL 0
+
+#ifdef DBG
+#undef DBG
+#endif
+
+#ifdef DBG2
+#undef DBG2
+#endif
+
+#if DBG_LEVEL > 0
+# define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x)
+#else
+# define DBG(f,x...) ((void)0)
+#endif
+#if DBG_LEVEL > 1
+# define DBG2(f,x...) DBG(f, ##x)
+#else
+# define DBG2(f,x...) ((void)0)
+#endif
+#if DBG_LEVEL > 2
+static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
+ printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n"
+ KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n"
+ KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
+ KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+ in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
+ in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
+ in_8(&iic->xtcntlss), in_8(&iic->directcntl));
+}
+# define DUMP_REGS(h,dev) dump_iic_regs((h),(dev))
+#else
+# define DUMP_REGS(h,dev) ((void)0)
+#endif
+
+/* Bus timings (in ns) for bit-banging */
+static struct i2c_timings {
+ unsigned int hd_sta;
+ unsigned int su_sto;
+ unsigned int low;
+ unsigned int high;
+ unsigned int buf;
+} timings [] = {
+/* Standard mode (100 KHz) */
+{
+ .hd_sta = 4000,
+ .su_sto = 4000,
+ .low = 4700,
+ .high = 4000,
+ .buf = 4700,
+},
+/* Fast mode (400 KHz) */
+{
+ .hd_sta = 600,
+ .su_sto = 600,
+ .low = 1300,
+ .high = 600,
+ .buf = 1300,
+}};
+
+/* Enable/disable interrupt generation */
+static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable)
+{
+ out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0);
+}
+
+/*
+ * Initialize IIC interface.
+ */
+static void iic_dev_init(struct ibm_iic_private* dev)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+ DBG("%d: init\n", dev->idx);
+
+ /* Clear master address */
+ out_8(&iic->lmadr, 0);
+ out_8(&iic->hmadr, 0);
+
+ /* Clear slave address */
+ out_8(&iic->lsadr, 0);
+ out_8(&iic->hsadr, 0);
+
+ /* Clear status & extended status */
+ out_8(&iic->sts, STS_SCMP | STS_IRQA);
+ out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA
+ | EXTSTS_ICT | EXTSTS_XFRA);
+
+ /* Set clock divider */
+ out_8(&iic->clkdiv, dev->clckdiv);
+
+ /* Clear transfer count */
+ out_8(&iic->xfrcnt, 0);
+
+ /* Clear extended control and status */
+ out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC
+ | XTCNTLSS_SWS);
+
+ /* Clear control register */
+ out_8(&iic->cntl, 0);
+
+ /* Enable interrupts if possible */
+ iic_interrupt_mode(dev, dev->irq >= 0);
+
+ /* Set mode control */
+ out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS
+ | (dev->fast_mode ? MDCNTL_FSM : 0));
+
+ DUMP_REGS("iic_init", dev);
+}
+
+/*
+ * Reset IIC interface
+ */
+static void iic_dev_reset(struct ibm_iic_private* dev)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ int i;
+ u8 dc;
+
+ DBG("%d: soft reset\n", dev->idx);
+ DUMP_REGS("reset", dev);
+
+ /* Place chip in the reset state */
+ out_8(&iic->xtcntlss, XTCNTLSS_SRST);
+
+ /* Check if bus is free */
+ dc = in_8(&iic->directcntl);
+ if (!DIRCTNL_FREE(dc)){
+ DBG("%d: trying to regain bus control\n", dev->idx);
+
+ /* Try to set bus free state */
+ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
+ /* Wait until we regain bus control */
+ for (i = 0; i < 100; ++i){
+ dc = in_8(&iic->directcntl);
+ if (DIRCTNL_FREE(dc))
+ break;
+
+ /* Toggle SCL line */
+ dc ^= DIRCNTL_SCC;
+ out_8(&iic->directcntl, dc);
+ udelay(10);
+ dc ^= DIRCNTL_SCC;
+ out_8(&iic->directcntl, dc);
+
+ /* be nice */
+ cond_resched();
+ }
+ }
+
+ /* Remove reset */
+ out_8(&iic->xtcntlss, 0);
+
+ /* Reinitialize interface */
+ iic_dev_init(dev);
+}
+
+/*
+ * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register.
+ */
+
+/* Wait for SCL and/or SDA to be high */
+static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask)
+{
+ unsigned long x = jiffies + HZ / 28 + 2;
+ while ((in_8(&iic->directcntl) & mask) != mask){
+ if (unlikely(time_after(jiffies, x)))
+ return -1;
+ cond_resched();
+ }
+ return 0;
+}
+
+static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0];
+ u8 mask, v, sda;
+ int i, res;
+
+ /* Only 7-bit addresses are supported */
+ if (unlikely(p->flags & I2C_M_TEN)){
+ DBG("%d: smbus_quick - 10 bit addresses are not supported\n",
+ dev->idx);
+ return -EINVAL;
+ }
+
+ DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr);
+
+ /* Reset IIC interface */
+ out_8(&iic->xtcntlss, XTCNTLSS_SRST);
+
+ /* Wait for bus to become free */
+ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+ if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC)))
+ goto err;
+ ndelay(t->buf);
+
+ /* START */
+ out_8(&iic->directcntl, DIRCNTL_SCC);
+ sda = 0;
+ ndelay(t->hd_sta);
+
+ /* Send address */
+ v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0));
+ for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){
+ out_8(&iic->directcntl, sda);
+ ndelay(t->low / 2);
+ sda = (v & mask) ? DIRCNTL_SDAC : 0;
+ out_8(&iic->directcntl, sda);
+ ndelay(t->low / 2);
+
+ out_8(&iic->directcntl, DIRCNTL_SCC | sda);
+ if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+ goto err;
+ ndelay(t->high);
+ }
+
+ /* ACK */
+ out_8(&iic->directcntl, sda);
+ ndelay(t->low / 2);
+ out_8(&iic->directcntl, DIRCNTL_SDAC);
+ ndelay(t->low / 2);
+ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+ if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+ goto err;
+ res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1;
+ ndelay(t->high);
+
+ /* STOP */
+ out_8(&iic->directcntl, 0);
+ ndelay(t->low);
+ out_8(&iic->directcntl, DIRCNTL_SCC);
+ if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC)))
+ goto err;
+ ndelay(t->su_sto);
+ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC);
+
+ ndelay(t->buf);
+
+ DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK");
+out:
+ /* Remove reset */
+ out_8(&iic->xtcntlss, 0);
+
+ /* Reinitialize interface */
+ iic_dev_init(dev);
+
+ return res;
+err:
+ DBG("%d: smbus_quick - bus is stuck\n", dev->idx);
+ res = -EREMOTEIO;
+ goto out;
+}
+
+/*
+ * IIC interrupt handler
+ */
+static irqreturn_t iic_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id;
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+ DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n",
+ dev->idx, in_8(&iic->sts), in_8(&iic->extsts));
+
+ /* Acknowledge IRQ and wakeup iic_wait_for_tc */
+ out_8(&iic->sts, STS_IRQA | STS_SCMP);
+ wake_up_interruptible(&dev->wq);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Get master transfer result and clear errors if any.
+ * Returns the number of actually transferred bytes or error (<0)
+ */
+static int iic_xfer_result(struct ibm_iic_private* dev)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+
+ if (unlikely(in_8(&iic->sts) & STS_ERR)){
+ DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx,
+ in_8(&iic->extsts));
+
+ /* Clear errors and possible pending IRQs */
+ out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD |
+ EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA);
+
+ /* Flush master data buffer */
+ out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
+
+ /* Is bus free?
+ * If error happened during combined xfer
+ * IIC interface is usually stuck in some strange
+ * state, the only way out - soft reset.
+ */
+ if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+ DBG("%d: bus is stuck, resetting\n", dev->idx);
+ iic_dev_reset(dev);
+ }
+ return -EREMOTEIO;
+ }
+ else
+ return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK;
+}
+
+/*
+ * Try to abort active transfer.
+ */
+static void iic_abort_xfer(struct ibm_iic_private* dev)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ unsigned long x;
+
+ DBG("%d: iic_abort_xfer\n", dev->idx);
+
+ out_8(&iic->cntl, CNTL_HMT);
+
+ /*
+ * Wait for the abort command to complete.
+ * It's not worth to be optimized, just poll (timeout >= 1 tick)
+ */
+ x = jiffies + 2;
+ while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+ if (time_after(jiffies, x)){
+ DBG("%d: abort timeout, resetting...\n", dev->idx);
+ iic_dev_reset(dev);
+ return;
+ }
+ schedule();
+ }
+
+ /* Just to clear errors */
+ iic_xfer_result(dev);
+}
+
+/*
+ * Wait for master transfer to complete.
+ * It puts current process to sleep until we get interrupt or timeout expires.
+ * Returns the number of transferred bytes or error (<0)
+ */
+static int iic_wait_for_tc(struct ibm_iic_private* dev){
+
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ int ret = 0;
+
+ if (dev->irq >= 0){
+ /* Interrupt mode */
+ ret = wait_event_interruptible_timeout(dev->wq,
+ !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ);
+
+ if (unlikely(ret < 0))
+ DBG("%d: wait interrupted\n", dev->idx);
+ else if (unlikely(in_8(&iic->sts) & STS_PT)){
+ DBG("%d: wait timeout\n", dev->idx);
+ ret = -ETIMEDOUT;
+ }
+ }
+ else {
+ /* Polling mode */
+ unsigned long x = jiffies + dev->adap.timeout * HZ;
+
+ while (in_8(&iic->sts) & STS_PT){
+ if (unlikely(time_after(jiffies, x))){
+ DBG("%d: poll timeout\n", dev->idx);
+ ret = -ETIMEDOUT;
+ break;
+ }
+
+ if (unlikely(signal_pending(current))){
+ DBG("%d: poll interrupted\n", dev->idx);
+ ret = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ }
+
+ if (unlikely(ret < 0))
+ iic_abort_xfer(dev);
+ else
+ ret = iic_xfer_result(dev);
+
+ DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret);
+
+ return ret;
+}
+
+/*
+ * Low level master transfer routine
+ */
+static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
+ int combined_xfer)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ char* buf = pm->buf;
+ int i, j, loops, ret = 0;
+ int len = pm->len;
+
+ u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT;
+ if (pm->flags & I2C_M_RD)
+ cntl |= CNTL_RW;
+
+ loops = (len + 3) / 4;
+ for (i = 0; i < loops; ++i, len -= 4){
+ int count = len > 4 ? 4 : len;
+ u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT);
+
+ if (!(cntl & CNTL_RW))
+ for (j = 0; j < count; ++j)
+ out_8((void __iomem *)&iic->mdbuf, *buf++);
+
+ if (i < loops - 1)
+ cmd |= CNTL_CHT;
+ else if (combined_xfer)
+ cmd |= CNTL_RPST;
+
+ DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd);
+
+ /* Start transfer */
+ out_8(&iic->cntl, cmd);
+
+ /* Wait for completion */
+ ret = iic_wait_for_tc(dev);
+
+ if (unlikely(ret < 0))
+ break;
+ else if (unlikely(ret != count)){
+ DBG("%d: xfer_bytes, requested %d, transfered %d\n",
+ dev->idx, count, ret);
+
+ /* If it's not a last part of xfer, abort it */
+ if (combined_xfer || (i < loops - 1))
+ iic_abort_xfer(dev);
+
+ ret = -EREMOTEIO;
+ break;
+ }
+
+ if (cntl & CNTL_RW)
+ for (j = 0; j < count; ++j)
+ *buf++ = in_8((void __iomem *)&iic->mdbuf);
+ }
+
+ return ret > 0 ? 0 : ret;
+}
+
+/*
+ * Set target slave address for master transfer
+ */
+static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg)
+{
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ u16 addr = msg->addr;
+
+ DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx,
+ addr, msg->flags & I2C_M_TEN ? 10 : 7);
+
+ if (msg->flags & I2C_M_TEN){
+ out_8(&iic->cntl, CNTL_AMD);
+ out_8(&iic->lmadr, addr);
+ out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06));
+ }
+ else {
+ out_8(&iic->cntl, 0);
+ out_8(&iic->lmadr, addr << 1);
+ }
+}
+
+static inline int iic_invalid_address(const struct i2c_msg* p)
+{
+ return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f));
+}
+
+static inline int iic_address_neq(const struct i2c_msg* p1,
+ const struct i2c_msg* p2)
+{
+ return (p1->addr != p2->addr)
+ || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN));
+}
+
+/*
+ * Generic master transfer entrypoint.
+ * Returns the number of processed messages or error (<0)
+ */
+static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap));
+ volatile struct iic_regs __iomem *iic = dev->vaddr;
+ int i, ret = 0;
+
+ DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
+
+ if (!num)
+ return 0;
+
+ /* Check the sanity of the passed messages.
+ * Uhh, generic i2c layer is more suitable place for such code...
+ */
+ if (unlikely(iic_invalid_address(&msgs[0]))){
+ DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx,
+ msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7);
+ return -EINVAL;
+ }
+ for (i = 0; i < num; ++i){
+ if (unlikely(msgs[i].len <= 0)){
+ if (num == 1 && !msgs[0].len){
+ /* Special case for I2C_SMBUS_QUICK emulation.
+ * IBM IIC doesn't support 0-length transactions
+ * so we have to emulate them using bit-banging.
+ */
+ return iic_smbus_quick(dev, &msgs[0]);
+ }
+ DBG("%d: invalid len %d in msg[%d]\n", dev->idx,
+ msgs[i].len, i);
+ return -EINVAL;
+ }
+ if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){
+ DBG("%d: invalid addr in msg[%d]\n", dev->idx, i);
+ return -EINVAL;
+ }
+ }
+
+ /* Check bus state */
+ if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
+ DBG("%d: iic_xfer, bus is not free\n", dev->idx);
+
+ /* Usually it means something serious has happend.
+ * We *cannot* have unfinished previous transfer
+ * so it doesn't make any sense to try to stop it.
+ * Probably we were not able to recover from the
+ * previous error.
+ * The only *reasonable* thing I can think of here
+ * is soft reset. --ebs
+ */
+ iic_dev_reset(dev);
+
+ if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){
+ DBG("%d: iic_xfer, bus is still not free\n", dev->idx);
+ return -EREMOTEIO;
+ }
+ }
+ else {
+ /* Flush master data buffer (just in case) */
+ out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB);
+ }
+
+ /* Load slave address */
+ iic_address(dev, &msgs[0]);
+
+ /* Do real transfer */
+ for (i = 0; i < num && !ret; ++i)
+ ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1);
+
+ return ret < 0 ? ret : num;
+}
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
+}
+
+static struct i2c_algorithm iic_algo = {
+ .name = "IBM IIC algorithm",
+ .id = I2C_ALGO_OCP,
+ .master_xfer = iic_xfer,
+ .functionality = iic_func
+};
+
+/*
+ * Calculates IICx_CLCKDIV value for a specific OPB clock frequency
+ */
+static inline u8 iic_clckdiv(unsigned int opb)
+{
+ /* Compatibility kludge, should go away after all cards
+ * are fixed to fill correct value for opbfreq.
+ * Previous driver version used hardcoded divider value 4,
+ * it corresponds to OPB frequency from the range (40, 50] MHz
+ */
+ if (!opb){
+ printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq,"
+ " fix your board specific setup\n");
+ opb = 50000000;
+ }
+
+ /* Convert to MHz */
+ opb /= 1000000;
+
+ if (opb < 20 || opb > 150){
+ printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n",
+ opb);
+ opb = opb < 20 ? 20 : 150;
+ }
+ return (u8)((opb + 9) / 10 - 1);
+}
+
+/*
+ * Register single IIC interface
+ */
+static int __devinit iic_probe(struct ocp_device *ocp){
+
+ struct ibm_iic_private* dev;
+ struct i2c_adapter* adap;
+ struct ocp_func_iic_data* iic_data = ocp->def->additions;
+ int ret;
+
+ if (!iic_data)
+ printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
+ ocp->def->index);
+
+ if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
+ printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
+ ocp->def->index);
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(*dev));
+ dev->idx = ocp->def->index;
+ ocp_set_drvdata(ocp, dev);
+
+ if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
+ printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
+ dev->idx);
+ ret = -ENXIO;
+ goto fail2;
+ }
+
+ init_waitqueue_head(&dev->wq);
+
+ dev->irq = iic_force_poll ? -1 : ocp->def->irq;
+ if (dev->irq >= 0){
+ /* Disable interrupts until we finish intialization,
+ assumes level-sensitive IRQ setup...
+ */
+ iic_interrupt_mode(dev, 0);
+ if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){
+ printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n",
+ dev->idx, dev->irq);
+ /* Fallback to the polling mode */
+ dev->irq = -1;
+ }
+ }
+
+ if (dev->irq < 0)
+ printk(KERN_WARNING "ibm-iic%d: using polling mode\n",
+ dev->idx);
+
+ /* Board specific settings */
+ dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
+
+ /* clckdiv is the same for *all* IIC interfaces,
+ * but I'd rather make a copy than introduce another global. --ebs
+ */
+ dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
+ DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
+
+ /* Initialize IIC interface */
+ iic_dev_init(dev);
+
+ /* Register it with i2c layer */
+ adap = &dev->adap;
+ strcpy(adap->name, "IBM IIC");
+ i2c_set_adapdata(adap, dev);
+ adap->id = I2C_HW_OCP | iic_algo.id;
+ adap->algo = &iic_algo;
+ adap->client_register = NULL;
+ adap->client_unregister = NULL;
+ adap->timeout = 1;
+ adap->retries = 1;
+
+ if ((ret = i2c_add_adapter(adap)) != 0){
+ printk(KERN_CRIT "ibm-iic%d: failed to register i2c adapter\n",
+ dev->idx);
+ goto fail;
+ }
+
+ printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx,
+ dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+
+ return 0;
+
+fail:
+ if (dev->irq >= 0){
+ iic_interrupt_mode(dev, 0);
+ free_irq(dev->irq, dev);
+ }
+
+ iounmap(dev->vaddr);
+fail2:
+ ocp_set_drvdata(ocp, NULL);
+ kfree(dev);
+ return ret;
+}
+
+/*
+ * Cleanup initialized IIC interface
+ */
+static void __devexit iic_remove(struct ocp_device *ocp)
+{
+ struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp);
+ BUG_ON(dev == NULL);
+ if (i2c_del_adapter(&dev->adap)){
+ printk(KERN_CRIT "ibm-iic%d: failed to delete i2c adapter :(\n",
+ dev->idx);
+ /* That's *very* bad, just shutdown IRQ ... */
+ if (dev->irq >= 0){
+ iic_interrupt_mode(dev, 0);
+ free_irq(dev->irq, dev);
+ dev->irq = -1;
+ }
+ } else {
+ if (dev->irq >= 0){
+ iic_interrupt_mode(dev, 0);
+ free_irq(dev->irq, dev);
+ }
+ iounmap(dev->vaddr);
+ kfree(dev);
+ }
+}
+
+static struct ocp_device_id ibm_iic_ids[] __devinitdata =
+{
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
+ { .vendor = OCP_VENDOR_INVALID }
+};
+
+MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
+
+static struct ocp_driver ibm_iic_driver =
+{
+ .name = "iic",
+ .id_table = ibm_iic_ids,
+ .probe = iic_probe,
+ .remove = __devexit_p(iic_remove),
+#if defined(CONFIG_PM)
+ .suspend = NULL,
+ .resume = NULL,
+#endif
+};
+
+static int __init iic_init(void)
+{
+ printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
+ return ocp_register_driver(&ibm_iic_driver);
+}
+
+static void __exit iic_exit(void)
+{
+ ocp_unregister_driver(&ibm_iic_driver);
+}
+
+module_init(iic_init);
+module_exit(iic_exit);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-22 21:03:46 +0000