aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-i801.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-i801.c')
-rw-r--r--drivers/i2c/busses/i2c-i801.c1372
1 files changed, 1064 insertions, 308 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index bbb2fbee836..6777cd6f877 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1,9 +1,10 @@
/*
- i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
- monitoring
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
+ Copyright (C) 2007 - 2012 Jean Delvare <jdelvare@suse.de>
+ Copyright (C) 2010 Intel Corporation,
+ David Woodhouse <dwmw2@infradead.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -21,405 +22,752 @@
*/
/*
- SUPPORTED DEVICES PCI ID
- 82801AA 2413
- 82801AB 2423
- 82801BA 2443
- 82801CA/CAM 2483
- 82801DB 24C3 (HW PEC supported, 32 byte buffer not supported)
- 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported)
- 6300ESB 25A4
- ICH6 266A
- ICH7 27DA
- ESB2 269B
- ICH8 283E
- This driver supports several versions of Intel's I/O Controller Hubs (ICH).
- For SMBus support, they are similar to the PIIX4 and are part
- of Intel's '810' and other chipsets.
- See the file Documentation/i2c/busses/i2c-i801 for details.
- I2C Block Read and Process Call are not supported.
+ Supports the following Intel I/O Controller Hubs (ICH):
+
+ I/O Block I2C
+ region SMBus Block proc. block
+ Chip name PCI ID size PEC buffer call read
+ ----------------------------------------------------------------------
+ 82801AA (ICH) 0x2413 16 no no no no
+ 82801AB (ICH0) 0x2423 16 no no no no
+ 82801BA (ICH2) 0x2443 16 no no no no
+ 82801CA (ICH3) 0x2483 32 soft no no no
+ 82801DB (ICH4) 0x24c3 32 hard yes no no
+ 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ 6300ESB 0x25a4 32 hard yes yes yes
+ 82801F (ICH6) 0x266a 32 hard yes yes yes
+ 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ 82801G (ICH7) 0x27da 32 hard yes yes yes
+ 82801H (ICH8) 0x283e 32 hard yes yes yes
+ 82801I (ICH9) 0x2930 32 hard yes yes yes
+ EP80579 (Tolapai) 0x5032 32 hard yes yes yes
+ ICH10 0x3a30 32 hard yes yes yes
+ ICH10 0x3a60 32 hard yes yes yes
+ 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
+ 6 Series (PCH) 0x1c22 32 hard yes yes yes
+ Patsburg (PCH) 0x1d22 32 hard yes yes yes
+ Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
+ Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
+ Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ Avoton (SOC) 0x1f3c 32 hard yes yes yes
+ Wellsburg (PCH) 0x8d22 32 hard yes yes yes
+ Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
+ Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
+ Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
+ Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ BayTrail (SOC) 0x0f12 32 hard yes yes yes
+
+ Features supported by this driver:
+ Software PEC no
+ Hardware PEC yes
+ Block buffer yes
+ Block process call transaction no
+ I2C block read transaction yes (doesn't use the block buffer)
+ Slave mode no
+ Interrupt processing yes
+
+ See the file Documentation/i2c/busses/i2c-i801 for details.
*/
-/* Note: we assume there can only be one I801, with one SMBus interface */
-
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/delay.h>
-#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <asm/io.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/err.h>
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+#include <linux/gpio.h>
+#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_device.h>
+#endif
/* I801 SMBus address offsets */
-#define SMBHSTSTS (0 + i801_smba)
-#define SMBHSTCNT (2 + i801_smba)
-#define SMBHSTCMD (3 + i801_smba)
-#define SMBHSTADD (4 + i801_smba)
-#define SMBHSTDAT0 (5 + i801_smba)
-#define SMBHSTDAT1 (6 + i801_smba)
-#define SMBBLKDAT (7 + i801_smba)
-#define SMBPEC (8 + i801_smba) /* ICH4 only */
-#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */
-#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
+#define SMBHSTSTS(p) (0 + (p)->smba)
+#define SMBHSTCNT(p) (2 + (p)->smba)
+#define SMBHSTCMD(p) (3 + (p)->smba)
+#define SMBHSTADD(p) (4 + (p)->smba)
+#define SMBHSTDAT0(p) (5 + (p)->smba)
+#define SMBHSTDAT1(p) (6 + (p)->smba)
+#define SMBBLKDAT(p) (7 + (p)->smba)
+#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
+#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
+#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
/* PCI Address Constants */
#define SMBBAR 4
+#define SMBPCISTS 0x006
#define SMBHSTCFG 0x040
+/* Host status bits for SMBPCISTS */
+#define SMBPCISTS_INTS 0x08
+
/* Host configuration bits for SMBHSTCFG */
#define SMBHSTCFG_HST_EN 1
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC 1
+#define SMBAUXCTL_E32B 2
+
/* Other settings */
-#define MAX_TIMEOUT 100
-#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
+#define MAX_RETRIES 400
/* I801 command constants */
#define I801_QUICK 0x00
#define I801_BYTE 0x04
#define I801_BYTE_DATA 0x08
#define I801_WORD_DATA 0x0C
-#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */
+#define I801_PROC_CALL 0x10 /* unimplemented */
#define I801_BLOCK_DATA 0x14
-#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */
-#define I801_BLOCK_LAST 0x34
-#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */
-#define I801_START 0x40
-#define I801_PEC_EN 0x80 /* ICH4 only */
-
+#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
+
+/* I801 Host Control register bits */
+#define SMBHSTCNT_INTREN 0x01
+#define SMBHSTCNT_KILL 0x02
+#define SMBHSTCNT_LAST_BYTE 0x20
+#define SMBHSTCNT_START 0x40
+#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE 0x80
+#define SMBHSTSTS_INUSE_STS 0x40
+#define SMBHSTSTS_SMBALERT_STS 0x20
+#define SMBHSTSTS_FAILED 0x10
+#define SMBHSTSTS_BUS_ERR 0x08
+#define SMBHSTSTS_DEV_ERR 0x04
+#define SMBHSTSTS_INTR 0x02
+#define SMBHSTSTS_HOST_BUSY 0x01
+
+#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
+ SMBHSTSTS_DEV_ERR)
+
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
+ STATUS_ERROR_FLAGS)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
+
+struct i801_mux_config {
+ char *gpio_chip;
+ unsigned values[3];
+ int n_values;
+ unsigned classes[3];
+ unsigned gpios[2]; /* Relative to gpio_chip->base */
+ int n_gpios;
+};
-static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec);
+struct i801_priv {
+ struct i2c_adapter adapter;
+ unsigned long smba;
+ unsigned char original_hstcfg;
+ struct pci_dev *pci_dev;
+ unsigned int features;
+
+ /* isr processing */
+ wait_queue_head_t waitq;
+ u8 status;
+
+ /* Command state used by isr for byte-by-byte block transactions */
+ u8 cmd;
+ bool is_read;
+ int count;
+ int len;
+ u8 *data;
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+ const struct i801_mux_config *mux_drvdata;
+ struct platform_device *mux_pdev;
+#endif
+};
-static unsigned long i801_smba;
static struct pci_driver i801_driver;
-static struct pci_dev *I801_dev;
-static int isich4;
-static int i801_transaction(void)
+#define FEATURE_SMBUS_PEC (1 << 0)
+#define FEATURE_BLOCK_BUFFER (1 << 1)
+#define FEATURE_BLOCK_PROC (1 << 2)
+#define FEATURE_I2C_BLOCK_READ (1 << 3)
+#define FEATURE_IRQ (1 << 4)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF (1 << 15)
+
+static const char *i801_feature_names[] = {
+ "SMBus PEC",
+ "Block buffer",
+ "Block process call",
+ "I2C block read",
+ "Interrupt",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+ "\t\t 0x01 disable SMBus PEC\n"
+ "\t\t 0x02 disable the block buffer\n"
+ "\t\t 0x08 disable the I2C block read functionality\n"
+ "\t\t 0x10 don't use interrupts ");
+
+/* Make sure the SMBus host is ready to start transmitting.
+ Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+ int status;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
+ status);
+ outb_p(status, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ if (status) {
+ dev_err(&priv->pci_dev->dev,
+ "Failed clearing status flags (%02x)\n",
+ status);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Convert the status register to an error code, and clear it.
+ * Note that status only contains the bits we want to clear, not the
+ * actual register value.
+ */
+static int i801_check_post(struct i801_priv *priv, int status)
{
- int temp;
int result = 0;
+
+ /*
+ * If the SMBus is still busy, we give up
+ * Note: This timeout condition only happens when using polling
+ * transactions. For interrupt operation, NAK/timeout is indicated by
+ * DEV_ERR.
+ */
+ if (unlikely(status < 0)) {
+ dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+ /* try to stop the current command */
+ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+ SMBHSTCNT(priv));
+ usleep_range(1000, 2000);
+ outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+ SMBHSTCNT(priv));
+
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS(priv));
+ if ((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & SMBHSTSTS_FAILED))
+ dev_err(&priv->pci_dev->dev,
+ "Failed terminating the transaction\n");
+ outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+ return -ETIMEDOUT;
+ }
+
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+ }
+ if (status & SMBHSTSTS_DEV_ERR) {
+ result = -ENXIO;
+ dev_dbg(&priv->pci_dev->dev, "No response\n");
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+ }
+
+ /* Clear status flags except BYTE_DONE, to be cleared by caller */
+ outb_p(status, SMBHSTSTS(priv));
+
+ return result;
+}
+
+/* Wait for BUSY being cleared and either INTR or an error flag being set */
+static int i801_wait_intr(struct i801_priv *priv)
+{
int timeout = 0;
+ int status;
- dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
- /* Make sure the SMBus host is ready to start transmitting */
- /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n",
- temp);
- outb_p(temp, SMBHSTSTS);
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
- return -1;
- } else {
- dev_dbg(&I801_dev->dev, "Successfull!\n");
- }
+ /* We will always wait for a fraction of a second! */
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while (((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) &&
+ (timeout++ < MAX_RETRIES));
+
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n");
+ return -ETIMEDOUT;
}
+ return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR);
+}
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+/* Wait for either BYTE_DONE or an error flag being set */
+static int i801_wait_byte_done(struct i801_priv *priv)
+{
+ int timeout = 0;
+ int status;
/* We will always wait for a fraction of a second! */
do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) &&
+ (timeout++ < MAX_RETRIES));
+
+ if (timeout > MAX_RETRIES) {
+ dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n");
+ return -ETIMEDOUT;
+ }
+ return status & STATUS_ERROR_FLAGS;
+}
- /* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- result = -1;
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+ int status;
+ int result;
+
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ if (priv->features & FEATURE_IRQ) {
+ outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
+ SMBHSTCNT(priv));
+ wait_event(priv->waitq, (status = priv->status));
+ priv->status = 0;
+ return i801_check_post(priv, status);
}
- if (temp & 0x10) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * SMBSCMD are passed in xact */
+ outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+ status = i801_wait_intr(priv);
+ return i801_check_post(priv, status);
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int hwpec)
+{
+ int i, len;
+ int status;
+
+ inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0(priv));
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
}
- if (temp & 0x08) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
- "until next hard reset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ status = i801_transaction(priv, I801_BLOCK_DATA |
+ (hwpec ? SMBHSTCNT_PEC_EN : 0));
+ if (status)
+ return status;
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT(priv));
}
+ return 0;
+}
+
+static void i801_isr_byte_done(struct i801_priv *priv)
+{
+ if (priv->is_read) {
+ /* For SMBus block reads, length is received with first byte */
+ if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
+ (priv->count == 0)) {
+ priv->len = inb_p(SMBHSTDAT0(priv));
+ if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ priv->len);
+ /* FIXME: Recover */
+ priv->len = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ dev_dbg(&priv->pci_dev->dev,
+ "SMBus block read size is %d\n",
+ priv->len);
+ }
+ priv->data[-1] = priv->len;
+ }
- if (temp & 0x04) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
+ /* Read next byte */
+ if (priv->count < priv->len)
+ priv->data[priv->count++] = inb(SMBBLKDAT(priv));
+ else
+ dev_dbg(&priv->pci_dev->dev,
+ "Discarding extra byte on block read\n");
+
+ /* Set LAST_BYTE for last byte of read transaction */
+ if (priv->count == priv->len - 1)
+ outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
+ SMBHSTCNT(priv));
+ } else if (priv->count < priv->len - 1) {
+ /* Write next byte, except for IRQ after last byte */
+ outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
}
- if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
- outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+ /* Clear BYTE_DONE to continue with next byte */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+}
+
+/*
+ * There are two kinds of interrupts:
+ *
+ * 1) i801 signals transaction completion with one of these interrupts:
+ * INTR - Success
+ * DEV_ERR - Invalid command, NAK or communication timeout
+ * BUS_ERR - SMI# transaction collision
+ * FAILED - transaction was canceled due to a KILL request
+ * When any of these occur, update ->status and wake up the waitq.
+ * ->status must be cleared before kicking off the next transaction.
+ *
+ * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
+ * occurs for each byte of a byte-by-byte to prepare the next byte.
+ */
+static irqreturn_t i801_isr(int irq, void *dev_id)
+{
+ struct i801_priv *priv = dev_id;
+ u16 pcists;
+ u8 status;
+
+ /* Confirm this is our interrupt */
+ pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
+ if (!(pcists & SMBPCISTS_INTS))
+ return IRQ_NONE;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status != 0x42)
+ dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status);
+
+ if (status & SMBHSTSTS_BYTE_DONE)
+ i801_isr_byte_done(priv);
- if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
- "(%02x)\n", temp);
+ /*
+ * Clear irq sources and report transaction result.
+ * ->status must be cleared before the next transaction is started.
+ */
+ status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
+ if (status) {
+ outb_p(status, SMBHSTSTS(priv));
+ priv->status |= status;
+ wake_up(&priv->waitq);
}
- dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
- return result;
+
+ return IRQ_HANDLED;
}
-/* All-inclusive block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec)
+/*
+ * For "byte-by-byte" block transactions:
+ * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
+ * I2C read uses cmd=I801_I2C_BLOCK_DATA
+ */
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int command,
+ int hwpec)
{
int i, len;
int smbcmd;
- int temp;
- int result = 0;
- int timeout;
- unsigned char hostc, errmask;
+ int status;
+ int result;
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
- hostc | SMBHSTCFG_I2C_EN);
- } else {
- dev_err(&I801_dev->dev,
- "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
- return -1;
- }
- }
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
- outb_p(len, SMBHSTDAT0);
- outb_p(data->block[1], SMBBLKDAT);
- } else {
- len = 32; /* max for reads */
+ outb_p(len, SMBHSTDAT0(priv));
+ outb_p(data->block[1], SMBBLKDAT(priv));
}
- if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
- /* set 32 byte buffer */
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
+ read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+
+ if (priv->features & FEATURE_IRQ) {
+ priv->is_read = (read_write == I2C_SMBUS_READ);
+ if (len == 1 && priv->is_read)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ priv->cmd = smbcmd | SMBHSTCNT_INTREN;
+ priv->len = len;
+ priv->count = 0;
+ priv->data = &data->block[1];
+
+ outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+ wait_event(priv->waitq, (status = priv->status));
+ priv->status = 0;
+ return i801_check_post(priv, status);
}
for (i = 1; i <= len; i++) {
if (i == len && read_write == I2C_SMBUS_READ)
- smbcmd = I801_BLOCK_LAST;
- else
- smbcmd = I801_BLOCK_DATA;
- outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
-
- dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
-
- /* Make sure the SMBus host is ready to start transmitting */
- temp = inb_p(SMBHSTSTS);
- if (i == 1) {
- /* Erronenous conditions before transaction:
- * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- errmask=0x9f;
- } else {
- /* Erronenous conditions during transaction:
- * Failed, Bus_Err, Dev_Err, Intr */
- errmask=0x1e;
- }
- if (temp & errmask) {
- dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
- "Resetting...\n", temp);
- outb_p(temp, SMBHSTSTS);
- if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
- dev_err(&I801_dev->dev,
- "Reset failed! (%02x)\n", temp);
- result = -1;
- goto END;
- }
- if (i != 1) {
- /* if die in middle of block transaction, fail */
- result = -1;
- goto END;
- }
- }
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ outb_p(smbcmd, SMBHSTCNT(priv));
if (i == 1)
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
-
- /* We will always wait for a fraction of a second! */
- timeout = 0;
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- }
- while ((!(temp & 0x80))
- && (timeout++ < MAX_TIMEOUT));
-
- /* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
- result = -1;
- dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
- }
-
- if (temp & 0x10) {
- result = -1;
- dev_dbg(&I801_dev->dev,
- "Error: Failed bus transaction\n");
- } else if (temp & 0x08) {
- result = -1;
- dev_err(&I801_dev->dev, "Bus collision!\n");
- } else if (temp & 0x04) {
- result = -1;
- dev_dbg(&I801_dev->dev, "Error: no response!\n");
- }
-
- if (i == 1 && read_write == I2C_SMBUS_READ) {
- len = inb_p(SMBHSTDAT0);
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
+ outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
+ SMBHSTCNT(priv));
+
+ status = i801_wait_byte_done(priv);
+ if (status)
+ goto exit;
+
+ if (i == 1 && read_write == I2C_SMBUS_READ
+ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS(priv)) &
+ SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE,
+ SMBHSTSTS(priv));
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return -EPROTO;
+ }
data->block[0] = len;
}
/* Retrieve/store value in SMBBLKDAT */
if (read_write == I2C_SMBUS_READ)
- data->block[i] = inb_p(SMBBLKDAT);
+ data->block[i] = inb_p(SMBBLKDAT(priv));
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
- outb_p(data->block[i+1], SMBBLKDAT);
- if ((temp & 0x9e) != 0x00)
- outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */
-
- if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev,
- "Bad status (%02x) at end of transaction\n",
- temp);
- }
- dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
- inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
- inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
-
- if (result < 0)
- goto END;
- }
-
- if (hwpec) {
- /* wait for INTR bit as advised by Intel */
- timeout = 0;
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((!(temp & 0x02))
- && (timeout++ < MAX_TIMEOUT));
-
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
- }
- outb_p(temp, SMBHSTSTS);
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
}
- result = 0;
-END:
+
+ status = i801_wait_intr(priv);
+exit:
+ return i801_check_post(priv, status);
+}
+
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
+{
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+ if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
+ return -EIO;
+ return 0;
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv,
+ union i2c_smbus_data *data, char read_write,
+ int command, int hwpec)
+{
+ int result = 0;
+ unsigned char hostc;
+
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&priv->pci_dev->dev,
+ "I2C block read is unsupported!\n");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ if (read_write == I2C_SMBUS_WRITE
+ || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (data->block[0] < 1)
+ data->block[0] = 1;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ data->block[0] = 32; /* max for SMBus block reads */
+ }
+
+ /* Experience has shown that the block buffer can only be used for
+ SMBus (not I2C) block transactions, even though the datasheet
+ doesn't mention this limitation. */
+ if ((priv->features & FEATURE_BLOCK_BUFFER)
+ && command != I2C_SMBUS_I2C_BLOCK_DATA
+ && i801_set_block_buffer_mode(priv) == 0)
+ result = i801_block_transaction_by_block(priv, data,
+ read_write, hwpec);
+ else
+ result = i801_block_transaction_byte_by_byte(priv, data,
+ read_write,
+ command, hwpec);
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
- pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
}
return result;
}
-/* Return -1 on error. */
-static s32 i801_access(struct i2c_adapter * adap, u16 addr,
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data * data)
+ int size, union i2c_smbus_data *data)
{
int hwpec;
int block = 0;
int ret, xact = 0;
+ struct i801_priv *priv = i2c_get_adapdata(adap);
- hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+ hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
&& size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
+ SMBHSTADD(priv));
xact = I801_QUICK;
break;
case I2C_SMBUS_BYTE:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
+ SMBHSTADD(priv));
if (read_write == I2C_SMBUS_WRITE)
- outb_p(command, SMBHSTCMD);
+ outb_p(command, SMBHSTCMD(priv));
xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
- outb_p(command, SMBHSTCMD);
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE)
- outb_p(data->byte, SMBHSTDAT0);
+ outb_p(data->byte, SMBHSTDAT0(priv));
xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
- outb_p(command, SMBHSTCMD);
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
- outb_p(data->word & 0xff, SMBHSTDAT0);
- outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
}
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
- outb_p(command, SMBHSTCMD);
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /* NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1(priv));
+ } else
+ outb_p(command, SMBHSTCMD(priv));
block = 1;
break;
- case I2C_SMBUS_PROC_CALL:
default:
- dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
- return -1;
+ dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+ size);
+ return -EOPNOTSUPP;
}
- outb_p(hwpec, SMBAUXCTL); /* enable/disable hardware PEC */
+ if (hwpec) /* enable/disable hardware PEC */
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+ else
+ outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+ SMBAUXCTL(priv));
- if(block)
- ret = i801_block_transaction(data, read_write, size, hwpec);
- else {
- outb_p(xact | ENABLE_INT9, SMBHSTCNT);
- ret = i801_transaction();
- }
+ if (block)
+ ret = i801_block_transaction(priv, data, read_write, size,
+ hwpec);
+ else
+ ret = i801_transaction(priv, xact);
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
- time, so we forcibly disable it after every transaction. */
- if (hwpec)
- outb_p(0, SMBAUXCTL);
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
+ if (hwpec || block)
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
- if(block)
+ if (block)
+ return ret;
+ if (ret)
return ret;
- if(ret)
- return -1;
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
return 0;
switch (xact & 0x7f) {
case I801_BYTE: /* Result put in SMBHSTDAT0 */
case I801_BYTE_DATA:
- data->byte = inb_p(SMBHSTDAT0);
+ data->byte = inb_p(SMBHSTDAT0(priv));
break;
case I801_WORD_DATA:
- data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+ data->word = inb_p(SMBHSTDAT0(priv)) +
+ (inb_p(SMBHSTDAT1(priv)) << 8);
break;
}
return 0;
@@ -428,10 +776,14 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
static u32 i801_func(struct i2c_adapter *adapter)
{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
- | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
}
static const struct i2c_algorithm smbus_algorithm = {
@@ -439,13 +791,7 @@ static const struct i2c_algorithm smbus_algorithm = {
.functionality = i801_func,
};
-static struct i2c_adapter i801_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
- .algo = &smbus_algorithm,
-};
-
-static struct pci_device_id i801_ids[] = {
+static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
@@ -457,23 +803,360 @@ static struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, i801_ids);
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
-static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
{
- unsigned char temp;
+ ssize_t offset;
+ const unsigned char signature[] = "FJKEYINF";
+
+ for (offset = 0; offset < 0x10000; offset += 0x10) {
+ if (check_signature(bios + offset, signature,
+ sizeof(signature)-1))
+ return bios + offset;
+ }
+ return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+ void __iomem *bios;
+ const void __iomem *p;
+
+ bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+ p = bios_signature(bios);
+ if (p) {
+ /* just use the first address */
+ apanel_addr = readb(p + 8 + 3) >> 1;
+ }
+ iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+ const char *name;
+ u8 type;
+ unsigned short i2c_addr;
+ const char *i2c_type;
+};
+
+static const struct dmi_onboard_device_info dmi_devices[] = {
+ { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+ { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+ { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void dmi_check_onboard_device(u8 type, const char *name,
+ struct i2c_adapter *adap)
+{
+ int i;
+ struct i2c_board_info info;
+
+ for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+ /* & ~0x80, ignore enabled/disabled bit */
+ if ((type & ~0x80) != dmi_devices[i].type)
+ continue;
+ if (strcasecmp(name, dmi_devices[i].name))
+ continue;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = dmi_devices[i].i2c_addr;
+ strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+ i2c_new_device(adap, &info);
+ break;
+ }
+}
+
+/* We use our own function to check for onboard devices instead of
+ dmi_find_device() as some buggy BIOS's have the devices we are interested
+ in marked as disabled */
+static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
+{
+ int i, count;
+
+ if (dm->type != 10)
+ return;
+
+ count = (dm->length - sizeof(struct dmi_header)) / 2;
+ for (i = 0; i < count; i++) {
+ const u8 *d = (char *)(dm + 1) + (i * 2);
+ const char *name = ((char *) dm) + dm->length;
+ u8 type = d[0];
+ u8 s = d[1];
+
+ if (!s)
+ continue;
+ s--;
+ while (s > 0 && name[0]) {
+ name += strlen(name) + 1;
+ s--;
+ }
+ if (name[0] == 0) /* Bogus string reference */
+ continue;
+
+ dmi_check_onboard_device(type, name, adap);
+ }
+}
+
+/* Register optional slaves */
+static void i801_probe_optional_slaves(struct i801_priv *priv)
+{
+ /* Only register slaves on main SMBus channel */
+ if (priv->features & FEATURE_IDF)
+ return;
+
+ if (apanel_addr) {
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = apanel_addr;
+ strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+ i2c_new_device(&priv->adapter, &info);
+ }
+
+ if (dmi_name_in_vendors("FUJITSU"))
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif /* CONFIG_X86 && CONFIG_DMI */
+
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
+static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03 },
+ .n_values = 2,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03, 0x01 },
+ .n_values = 3,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static const struct dmi_system_id mux_dmi_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ { }
+};
+
+/* Setup multiplexing if needed */
+static int i801_add_mux(struct i801_priv *priv)
+{
+ struct device *dev = &priv->adapter.dev;
+ const struct i801_mux_config *mux_config;
+ struct i2c_mux_gpio_platform_data gpio_data;
int err;
- I801_dev = dev;
- if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
- isich4 = 1;
- else
- isich4 = 0;
+ if (!priv->mux_drvdata)
+ return 0;
+ mux_config = priv->mux_drvdata;
+
+ /* Prepare the platform data */
+ memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
+ gpio_data.parent = priv->adapter.nr;
+ gpio_data.values = mux_config->values;
+ gpio_data.n_values = mux_config->n_values;
+ gpio_data.classes = mux_config->classes;
+ gpio_data.gpio_chip = mux_config->gpio_chip;
+ gpio_data.gpios = mux_config->gpios;
+ gpio_data.n_gpios = mux_config->n_gpios;
+ gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+ /* Register the mux device */
+ priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
+ PLATFORM_DEVID_AUTO, &gpio_data,
+ sizeof(struct i2c_mux_gpio_platform_data));
+ if (IS_ERR(priv->mux_pdev)) {
+ err = PTR_ERR(priv->mux_pdev);
+ priv->mux_pdev = NULL;
+ dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static void i801_del_mux(struct i801_priv *priv)
+{
+ if (priv->mux_pdev)
+ platform_device_unregister(priv->mux_pdev);
+}
+
+static unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ const struct dmi_system_id *id;
+ const struct i801_mux_config *mux_config;
+ unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ int i;
+
+ id = dmi_first_match(mux_dmi_table);
+ if (id) {
+ /* Remove branch classes from trunk */
+ mux_config = id->driver_data;
+ for (i = 0; i < mux_config->n_values; i++)
+ class &= ~mux_config->classes[i];
+
+ /* Remember for later */
+ priv->mux_drvdata = mux_config;
+ }
+
+ return class;
+}
+#else
+static inline int i801_add_mux(struct i801_priv *priv) { return 0; }
+static inline void i801_del_mux(struct i801_priv *priv) { }
+
+static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ return I2C_CLASS_HWMON | I2C_CLASS_SPD;
+}
+#endif
+
+static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ unsigned char temp;
+ int err, i;
+ struct i801_priv *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ i2c_set_adapdata(&priv->adapter, priv);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = i801_get_adapter_class(priv);
+ priv->adapter.algo = &smbus_algorithm;
+
+ priv->pci_dev = dev;
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+ case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
+ priv->features |= FEATURE_IDF;
+ /* fall through */
+ default:
+ priv->features |= FEATURE_I2C_BLOCK_READ;
+ priv->features |= FEATURE_IRQ;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ priv->features |= FEATURE_SMBUS_PEC;
+ priv->features |= FEATURE_BLOCK_BUFFER;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801CA_3:
+ case PCI_DEVICE_ID_INTEL_82801BA_2:
+ case PCI_DEVICE_ID_INTEL_82801AB_3:
+ case PCI_DEVICE_ID_INTEL_82801AA_3:
+ break;
+ }
+
+ /* Disable features on user request */
+ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+ if (priv->features & disable_features & (1 << i))
+ dev_notice(&dev->dev, "%s disabled by user\n",
+ i801_feature_names[i]);
+ }
+ priv->features &= ~disable_features;
err = pci_enable_device(dev);
if (err) {
@@ -483,72 +1166,147 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
}
/* Determine the address of the SMBus area */
- i801_smba = pci_resource_start(dev, SMBBAR);
- if (!i801_smba) {
+ priv->smba = pci_resource_start(dev, SMBBAR);
+ if (!priv->smba) {
dev_err(&dev->dev, "SMBus base address uninitialized, "
"upgrade BIOS\n");
err = -ENODEV;
goto exit;
}
+ err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+ if (err) {
+ err = -ENODEV;
+ goto exit;
+ }
+
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
dev_err(&dev->dev, "Failed to request SMBus region "
- "0x%lx-0x%Lx\n", i801_smba,
+ "0x%lx-0x%Lx\n", priv->smba,
(unsigned long long)pci_resource_end(dev, SMBBAR));
goto exit;
}
- pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
+ priv->original_hstcfg = temp;
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
if (!(temp & SMBHSTCFG_HST_EN)) {
dev_info(&dev->dev, "Enabling SMBus device\n");
temp |= SMBHSTCFG_HST_EN;
}
- pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
- if (temp & SMBHSTCFG_SMB_SMI_EN)
+ if (temp & SMBHSTCFG_SMB_SMI_EN) {
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
- else
- dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+ /* Disable SMBus interrupt feature if SMBus using SMI# */
+ priv->features &= ~FEATURE_IRQ;
+ }
+
+ /* Clear special mode bits */
+ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ if (priv->features & FEATURE_IRQ) {
+ init_waitqueue_head(&priv->waitq);
+
+ err = request_irq(dev->irq, i801_isr, IRQF_SHARED,
+ i801_driver.name, priv);
+ if (err) {
+ dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
+ dev->irq, err);
+ goto exit_release;
+ }
+ dev_info(&dev->dev, "SMBus using PCI Interrupt\n");
+ }
+
+ /* set up the sysfs linkage to our parent device */
+ priv->adapter.dev.parent = &dev->dev;
- /* set up the driverfs linkage to our parent device */
- i801_adapter.dev.parent = &dev->dev;
+ /* Retry up to 3 times on lost arbitration */
+ priv->adapter.retries = 3;
- snprintf(i801_adapter.name, I2C_NAME_SIZE,
- "SMBus I801 adapter at %04lx", i801_smba);
- err = i2c_add_adapter(&i801_adapter);
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+ "SMBus I801 adapter at %04lx", priv->smba);
+ err = i2c_add_adapter(&priv->adapter);
if (err) {
dev_err(&dev->dev, "Failed to add SMBus adapter\n");
- goto exit_release;
+ goto exit_free_irq;
}
+
+ i801_probe_optional_slaves(priv);
+ /* We ignore errors - multiplexing is optional */
+ i801_add_mux(priv);
+
+ pci_set_drvdata(dev, priv);
+
return 0;
+exit_free_irq:
+ if (priv->features & FEATURE_IRQ)
+ free_irq(dev->irq, priv);
exit_release:
pci_release_region(dev, SMBBAR);
exit:
+ kfree(priv);
return err;
}
-static void __devexit i801_remove(struct pci_dev *dev)
+static void i801_remove(struct pci_dev *dev)
{
- i2c_del_adapter(&i801_adapter);
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ i801_del_mux(priv);
+ i2c_del_adapter(&priv->adapter);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+
+ if (priv->features & FEATURE_IRQ)
+ free_irq(dev->irq, priv);
pci_release_region(dev, SMBBAR);
+
+ kfree(priv);
/*
* do not call pci_disable_device(dev) since it can cause hard hangs on
* some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
*/
}
+#ifdef CONFIG_PM
+static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ pci_save_state(dev);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
+ return 0;
+}
+
+static int i801_resume(struct pci_dev *dev)
+{
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+ return pci_enable_device(dev);
+}
+#else
+#define i801_suspend NULL
+#define i801_resume NULL
+#endif
+
static struct pci_driver i801_driver = {
.name = "i801_smbus",
.id_table = i801_ids,
.probe = i801_probe,
- .remove = __devexit_p(i801_remove),
+ .remove = i801_remove,
+ .suspend = i801_suspend,
+ .resume = i801_resume,
};
static int __init i2c_i801_init(void)
{
+ if (dmi_name_in_vendors("FUJITSU"))
+ input_apanel_init();
return pci_register_driver(&i801_driver);
}
@@ -557,9 +1315,7 @@ static void __exit i2c_i801_exit(void)
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-07 19:32:37 +0000