aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-ali1535.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-ali1535.c')
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c126
1 files changed, 64 insertions, 62 deletions
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b9458..451e305f797 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -1,23 +1,23 @@
/*
- Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Mark D. Studebaker <mdsxyz123@yahoo.com>,
- Dan Eaton <dan.eaton@rocketlogix.com> and
- Stephen Rousset<stephen.rousset@rocketlogix.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
+ * Philip Edelbrock <phil@netroedge.com>,
+ * Mark D. Studebaker <mdsxyz123@yahoo.com>,
+ * Dan Eaton <dan.eaton@rocketlogix.com> and
+ * Stephen Rousset <stephen.rousset@rocketlogix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
@@ -58,9 +58,8 @@
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/acpi.h>
-#include <asm/io.h>
+#include <linux/io.h>
/* ALI1535 SMBus address offsets */
@@ -132,7 +131,8 @@
#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */
static struct pci_driver ali1535_driver;
-static unsigned short ali1535_smba;
+static unsigned long ali1535_smba;
+static unsigned short ali1535_offset;
/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
Note the differences between kernels with the old PCI BIOS interface and
@@ -140,7 +140,7 @@ static unsigned short ali1535_smba;
defined to make the transition easier. */
static int ali1535_setup(struct pci_dev *dev)
{
- int retval = -ENODEV;
+ int retval;
unsigned char temp;
/* Check the following things:
@@ -149,15 +149,28 @@ static int ali1535_setup(struct pci_dev *dev)
- We can use the addresses
*/
+ retval = pci_enable_device(dev);
+ if (retval) {
+ dev_err(&dev->dev, "ALI1535_smb can't enable device\n");
+ goto exit;
+ }
+
/* Determine the address of the SMBus area */
- pci_read_config_word(dev, SMBBA, &ali1535_smba);
- ali1535_smba &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
- if (ali1535_smba == 0) {
+ pci_read_config_word(dev, SMBBA, &ali1535_offset);
+ dev_dbg(&dev->dev, "ALI1535_smb is at offset 0x%04x\n", ali1535_offset);
+ ali1535_offset &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
+ if (ali1535_offset == 0) {
dev_warn(&dev->dev,
"ALI1535_smb region uninitialized - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit;
}
+ if (pci_resource_flags(dev, 0) & IORESOURCE_IO)
+ ali1535_smba = pci_resource_start(dev, 0) + ali1535_offset;
+ else
+ ali1535_smba = ali1535_offset;
+
retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
ali1535_driver.name);
if (retval)
@@ -165,8 +178,9 @@ static int ali1535_setup(struct pci_dev *dev)
if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
ali1535_driver.name)) {
- dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
+ dev_err(&dev->dev, "ALI1535_smb region 0x%lx already in use!\n",
ali1535_smba);
+ retval = -EBUSY;
goto exit;
}
@@ -174,6 +188,7 @@ static int ali1535_setup(struct pci_dev *dev)
pci_read_config_byte(dev, SMBCFG, &temp);
if ((temp & ALI1535_SMBIO_EN) == 0) {
dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit_free;
}
@@ -181,6 +196,7 @@ static int ali1535_setup(struct pci_dev *dev)
pci_read_config_byte(dev, SMBHSTCFG, &temp);
if ((temp & 1) == 0) {
dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit_free;
}
@@ -196,14 +212,13 @@ static int ali1535_setup(struct pci_dev *dev)
*/
pci_read_config_byte(dev, SMBREV, &temp);
dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
- dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
+ dev_dbg(&dev->dev, "ALI1535_smba = 0x%lx\n", ali1535_smba);
- retval = 0;
-exit:
- return retval;
+ return 0;
exit_free:
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+exit:
return retval;
}
@@ -254,8 +269,8 @@ static int ali1535_transaction(struct i2c_adapter *adap)
if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
/* do a clear-on-write */
outb_p(0xFF, SMBHSTSTS);
- if ((temp = inb_p(SMBHSTSTS)) &
- (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
+ temp = inb_p(SMBHSTSTS);
+ if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) {
/* This is probably going to be correctable only by a
* power reset as one of the bits now appears to be
* stuck */
@@ -267,9 +282,8 @@ static int ali1535_transaction(struct i2c_adapter *adap)
}
} else {
/* check and clear done bit */
- if (temp & ALI1535_STS_DONE) {
+ if (temp & ALI1535_STS_DONE)
outb_p(temp, SMBHSTSTS);
- }
}
/* start the transaction by writing anything to the start register */
@@ -278,13 +292,13 @@ static int ali1535_transaction(struct i2c_adapter *adap)
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
- msleep(1);
+ usleep_range(1000, 2000);
temp = inb_p(SMBHSTSTS);
} while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE))
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
@@ -295,7 +309,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
}
/* Unfortunately the ALI SMB controller maps "no response" and "bus
- * collision" into a single bit. No reponse is the usual case so don't
+ * collision" into a single bit. No response is the usual case so don't
* do a printk. This means that bus collisions go unreported.
*/
if (temp & ALI1535_STS_BUSERR) {
@@ -325,12 +339,12 @@ static int ali1535_transaction(struct i2c_adapter *adap)
/* take consequent actions for error conditions */
if (!(temp & ALI1535_STS_DONE)) {
/* issue "kill" to reset host controller */
- outb_p(ALI1535_KILL,SMBHSTTYP);
- outb_p(0xFF,SMBHSTSTS);
+ outb_p(ALI1535_KILL, SMBHSTTYP);
+ outb_p(0xFF, SMBHSTSTS);
} else if (temp & ALI1535_STS_ERR) {
/* issue "timeout" to reset all devices on bus */
- outb_p(ALI1535_T_OUT,SMBHSTTYP);
- outb_p(0xFF,SMBHSTSTS);
+ outb_p(ALI1535_T_OUT, SMBHSTTYP);
+ outb_p(0xFF, SMBHSTSTS);
}
return result;
@@ -351,7 +365,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
for (timeout = 0;
(timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE);
timeout++) {
- msleep(1);
+ usleep_range(1000, 2000);
temp = inb_p(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT)
@@ -476,19 +490,18 @@ static const struct i2c_algorithm smbus_algorithm = {
static struct i2c_adapter ali1535_adapter = {
.owner = THIS_MODULE,
- .id = I2C_HW_SMBUS_ALI1535,
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &smbus_algorithm,
};
-static struct pci_device_id ali1535_ids[] = {
+static const struct pci_device_id ali1535_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
{ },
};
-MODULE_DEVICE_TABLE (pci, ali1535_ids);
+MODULE_DEVICE_TABLE(pci, ali1535_ids);
-static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
if (ali1535_setup(dev)) {
dev_warn(&dev->dev,
@@ -500,11 +513,11 @@ static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_
ali1535_adapter.dev.parent = &dev->dev;
snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
- "SMBus ALI1535 adapter at %04x", ali1535_smba);
+ "SMBus ALI1535 adapter at %04x", ali1535_offset);
return i2c_add_adapter(&ali1535_adapter);
}
-static void __devexit ali1535_remove(struct pci_dev *dev)
+static void ali1535_remove(struct pci_dev *dev)
{
i2c_del_adapter(&ali1535_adapter);
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
@@ -514,18 +527,10 @@ static struct pci_driver ali1535_driver = {
.name = "ali1535_smbus",
.id_table = ali1535_ids,
.probe = ali1535_probe,
- .remove = __devexit_p(ali1535_remove),
+ .remove = ali1535_remove,
};
-static int __init i2c_ali1535_init(void)
-{
- return pci_register_driver(&ali1535_driver);
-}
-
-static void __exit i2c_ali1535_exit(void)
-{
- pci_unregister_driver(&ali1535_driver);
-}
+module_pci_driver(ali1535_driver);
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"Philip Edelbrock <phil@netroedge.com>, "
@@ -533,6 +538,3 @@ MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"and Dan Eaton <dan.eaton@rocketlogix.com>");
MODULE_DESCRIPTION("ALI1535 SMBus driver");
MODULE_LICENSE("GPL");
-
-module_init(i2c_ali1535_init);
-module_exit(i2c_ali1535_exit);