diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 49 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 4 | ||||
| -rw-r--r-- | drivers/hwmon/adt7462.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/amc6821.c | 1116 | ||||
| -rw-r--r-- | drivers/hwmon/asus_atk0110.c | 289 | ||||
| -rw-r--r-- | drivers/hwmon/coretemp.c | 16 | ||||
| -rw-r--r-- | drivers/hwmon/k10temp.c | 223 | ||||
| -rw-r--r-- | drivers/hwmon/k8temp.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/lis3lv02d_i2c.c | 183 | ||||
| -rw-r--r-- | drivers/hwmon/sht15.c | 6 | ||||
| -rw-r--r-- | drivers/hwmon/sis5595.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/smsc47m1.c | 153 | ||||
| -rw-r--r-- | drivers/hwmon/via-cputemp.c | 356 | ||||
| -rw-r--r-- | drivers/hwmon/via686a.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/vt8231.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/w83627hf.c | 2 |
16 files changed, 2315 insertions, 92 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 95ccbe377f9..68cf87749a4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -228,6 +228,18 @@ config SENSORS_K8TEMP This driver can also be built as a module. If so, the module will be called k8temp. +config SENSORS_K10TEMP + tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h + microarchitectures. + + This driver can also be built as a module. If so, the module + will be called k10temp. + config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL @@ -380,7 +392,7 @@ config SENSORS_GL520SM config SENSORS_CORETEMP tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 && EXPERIMENTAL + depends on X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs @@ -780,6 +792,16 @@ config SENSORS_ADS7828 This driver can also be built as a module. If so, the module will be called ads7828. +config SENSORS_AMC6821 + tristate "Texas Instruments AMC6821" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Texas Instruments + AMC6821 hardware monitoring chips. + + This driver can also be build as a module. If so, the module + will be called amc6821. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C && EXPERIMENTAL @@ -810,6 +832,14 @@ config SENSORS_TMP421 This driver can also be built as a module. If so, the module will be called tmp421. +config SENSORS_VIA_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the VIA C7 and Nano. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI @@ -998,6 +1028,23 @@ config SENSORS_LIS3_SPI will be called lis3lv02d and a specific module for the SPI transport is called lis3lv02d_spi. +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select INPUT_POLLDEV + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 33c2ee10528..4bc215c0953 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -53,8 +53,10 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM73) += lm73.o @@ -84,9 +86,11 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o +obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o +obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index a1a7ef14b51..a31e77c776a 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -94,7 +94,7 @@ static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; #define ADT7462_PIN24_SHIFT 6 #define ADT7462_PIN26_VOLT_INPUT 0x08 #define ADT7462_PIN25_VOLT_INPUT 0x20 -#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_SHIFT 4 /* cfg3 */ #define ADT7462_PIN28_VOLT 0x5 #define ADT7462_REG_ALARM1 0xB8 diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c new file mode 100644 index 00000000000..1c89d922d61 --- /dev/null +++ b/drivers/hwmon/amc6821.c @@ -0,0 +1,1116 @@ +/* + amc6821.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si> + + Based on max6650.c: + Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include <linux/kernel.h> /* Needed for KERN_INFO */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> + + +/* + * Addresses to scan. + */ + +static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, + 0x4c, 0x4d, 0x4e, I2C_CLIENT_END}; + + + +/* + * Insmod parameters + */ + +static int pwminv = 0; /*Inverted PWM output. */ +module_param(pwminv, int, S_IRUGO); + +static int init = 1; /*Power-on initialization.*/ +module_param(init, int, S_IRUGO); + + +enum chips { amc6821 }; + +#define AMC6821_REG_DEV_ID 0x3D +#define AMC6821_REG_COMP_ID 0x3E +#define AMC6821_REG_CONF1 0x00 +#define AMC6821_REG_CONF2 0x01 +#define AMC6821_REG_CONF3 0x3F +#define AMC6821_REG_CONF4 0x04 +#define AMC6821_REG_STAT1 0x02 +#define AMC6821_REG_STAT2 0x03 +#define AMC6821_REG_TDATA_LOW 0x08 +#define AMC6821_REG_TDATA_HI 0x09 +#define AMC6821_REG_LTEMP_HI 0x0A +#define AMC6821_REG_RTEMP_HI 0x0B +#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 +#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 +#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 +#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 +#define AMC6821_REG_LTEMP_CRIT 0x1B +#define AMC6821_REG_RTEMP_CRIT 0x1D +#define AMC6821_REG_PSV_TEMP 0x1C +#define AMC6821_REG_DCY 0x22 +#define AMC6821_REG_LTEMP_FAN_CTRL 0x24 +#define AMC6821_REG_RTEMP_FAN_CTRL 0x25 +#define AMC6821_REG_DCY_LOW_TEMP 0x21 + +#define AMC6821_REG_TACH_LLIMITL 0x10 +#define AMC6821_REG_TACH_LLIMITH 0x11 +#define AMC6821_REG_TACH_HLIMITL 0x12 +#define AMC6821_REG_TACH_HLIMITH 0x13 + +#define AMC6821_CONF1_START 0x01 +#define AMC6821_CONF1_FAN_INT_EN 0x02 +#define AMC6821_CONF1_FANIE 0x04 +#define AMC6821_CONF1_PWMINV 0x08 +#define AMC6821_CONF1_FAN_FAULT_EN 0x10 +#define AMC6821_CONF1_FDRC0 0x20 +#define AMC6821_CONF1_FDRC1 0x40 +#define AMC6821_CONF1_THERMOVIE 0x80 + +#define AMC6821_CONF2_PWM_EN 0x01 +#define AMC6821_CONF2_TACH_MODE 0x02 +#define AMC6821_CONF2_TACH_EN 0x04 +#define AMC6821_CONF2_RTFIE 0x08 +#define AMC6821_CONF2_LTOIE 0x10 +#define AMC6821_CONF2_RTOIE 0x20 +#define AMC6821_CONF2_PSVIE 0x40 +#define AMC6821_CONF2_RST 0x80 + +#define AMC6821_CONF3_THERM_FAN_EN 0x80 +#define AMC6821_CONF3_REV_MASK 0x0F + +#define AMC6821_CONF4_OVREN 0x10 +#define AMC6821_CONF4_TACH_FAST 0x20 +#define AMC6821_CONF4_PSPR 0x40 +#define AMC6821_CONF4_MODE 0x80 + +#define AMC6821_STAT1_RPM_ALARM 0x01 +#define AMC6821_STAT1_FANS 0x02 +#define AMC6821_STAT1_RTH 0x04 +#define AMC6821_STAT1_RTL 0x08 +#define AMC6821_STAT1_R_THERM 0x10 +#define AMC6821_STAT1_RTF 0x20 +#define AMC6821_STAT1_LTH 0x40 +#define AMC6821_STAT1_LTL 0x80 + +#define AMC6821_STAT2_RTC 0x08 +#define AMC6821_STAT2_LTC 0x10 +#define AMC6821_STAT2_LPSV 0x20 +#define AMC6821_STAT2_L_THERM 0x40 +#define AMC6821_STAT2_THERM_IN 0x80 + +enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX, + IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN, + IDX_TEMP2_MAX, IDX_TEMP2_CRIT, + TEMP_IDX_LEN, }; + +static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI, + AMC6821_REG_LTEMP_LIMIT_MIN, + AMC6821_REG_LTEMP_LIMIT_MAX, + AMC6821_REG_LTEMP_CRIT, + AMC6821_REG_RTEMP_HI, + AMC6821_REG_RTEMP_LIMIT_MIN, + AMC6821_REG_RTEMP_LIMIT_MAX, + AMC6821_REG_RTEMP_CRIT, }; + +enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX, + FAN1_IDX_LEN, }; + +static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, + AMC6821_REG_TACH_LLIMITL, + AMC6821_REG_TACH_HLIMITL, }; + + +static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, + AMC6821_REG_TACH_LLIMITH, + AMC6821_REG_TACH_HLIMITH, }; + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id); +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info); +static int amc6821_init_client(struct i2c_client *client); +static int amc6821_remove(struct i2c_client *client); +static struct amc6821_data *amc6821_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id amc6821_id[] = { + { "amc6821", amc6821 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, amc6821_id); + +static struct i2c_driver amc6821_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "amc6821", + }, + .probe = amc6821_probe, + .remove = amc6821_remove, + .id_table = amc6821_id, + .detect = amc6821_detect, + .address_list = normal_i2c, +}; + + +/* + * Client data (each client gets its own) + */ + +struct amc6821_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + int temp[TEMP_IDX_LEN]; + + u16 fan[FAN1_IDX_LEN]; + u8 fan1_div; + + u8 pwm1; + u8 temp1_auto_point_temp[3]; + u8 temp2_auto_point_temp[3]; + u8 pwm1_auto_point_pwm[3]; + u8 pwm1_enable; + u8 pwm1_auto_channels_temp; + + u8 stat1; + u8 stat2; +}; + + +static ssize_t get_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + + return sprintf(buf, "%d\n", data->temp[ix] * 1000); +} + + + +static ssize_t set_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int ix = to_sensor_dev_attr(attr)->index; + long val; + + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = SENSORS_LIMIT(val / 1000, -128, 127); + + mutex_lock(&data->update_lock); + data->temp[ix] = val; + if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + + + +static ssize_t get_temp_alarm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + u8 flag; + + switch (ix) { + case IDX_TEMP1_MIN: + flag = data->stat1 & AMC6821_STAT1_LTL; + break; + case IDX_TEMP1_MAX: + flag = data->stat1 & AMC6821_STAT1_LTH; + break; + case IDX_TEMP1_CRIT: + flag = data->stat2 & AMC6821_STAT2_LTC; + break; + case IDX_TEMP2_MIN: + flag = data->stat1 & AMC6821_STAT1_RTL; + break; + case IDX_TEMP2_MAX: + flag = data->stat1 & AMC6821_STAT1_RTH; + break; + case IDX_TEMP2_CRIT: + flag = data->stat2 & AMC6821_STAT2_RTC; + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + return -EINVAL; + } + if (flag) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + + +static ssize_t get_temp2_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_RTF) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + +static ssize_t get_pwm1( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1); +} + +static ssize_t set_pwm1( + struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1 = SENSORS_LIMIT(val , 0, 255); + i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_pwm1_enable( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_enable); +} + +static ssize_t set_pwm1_enable( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + + switch (val) { + case 1: + config &= ~AMC6821_CONF1_FDRC0; + config &= ~AMC6821_CONF1_FDRC1; + break; + case 2: + config &= ~AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + case 3: + config |= AMC6821_CONF1_FDRC0; + config |= AMC6821_CONF1_FDRC1; + break; + default: + return -EINVAL; + } + mutex_lock(&data->update_lock); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } + mutex_unlock(&data->update_lock); + return count; +} + + +static ssize_t get_pwm1_auto_channels_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp); +} + + +static ssize_t get_temp_auto_point_temp( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr_2(devattr)->index; + int nr = to_sensor_dev_attr_2(devattr)->nr; + struct amc6821_data *data = amc6821_update_device(dev); + switch (nr) { + case 1: + return sprintf(buf, "%d\n", + data->temp1_auto_point_temp[ix] * 1000); + break; + case 2: + return sprintf(buf, "%d\n", + data->temp2_auto_point_temp[ix] * 1000); + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } +} + + +static ssize_t get_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int ix = to_sensor_dev_attr(devattr)->index; + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]); +} + + +static inline ssize_t set_slope_register(struct i2c_client *client, + u8 reg, + u8 dpwm, + u8 *ptemp) +{ + int dt; + u8 tmp; + + dt = ptemp[2]-ptemp[1]; + for (tmp = 4; tmp > 0; tmp--) { + if (dt * (0x20 >> tmp) >= dpwm) + break; + } + tmp |= (ptemp[1] & 0x7C) << 1; + if (i2c_smbus_write_byte_data(client, + reg, tmp)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + return -EIO; + } + return 0; +} + + + +static ssize_t set_temp_auto_point_temp( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr_2(attr)->index; + int nr = to_sensor_dev_attr_2(attr)->nr; + u8 *ptemp; + u8 reg; + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + switch (nr) { + case 1: + ptemp = data->temp1_auto_point_temp; + reg = AMC6821_REG_LTEMP_FAN_CTRL; + break; + case 2: + ptemp = data->temp2_auto_point_temp; + reg = AMC6821_REG_RTEMP_FAN_CTRL; + break; + default: + dev_dbg(dev, "Unknown attr->nr (%d).\n", nr); + return -EINVAL; + } + + data->valid = 0; + mutex_lock(&data->update_lock); + switch (ix) { + case 0: + ptemp[0] = SENSORS_LIMIT(val / 1000, 0, + data->temp1_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, + data->temp2_auto_point_temp[1]); + ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63); + if (i2c_smbus_write_byte_data( + client, + AMC6821_REG_PSV_TEMP, + ptemp[0])) { + dev_err(&client->dev, + "Register write error, aborting.\n"); + count = -EIO; + } + goto EXIT; + break; + case 1: + ptemp[1] = SENSORS_LIMIT( + val / 1000, + (ptemp[0] & 0x7C) + 4, + 124); + ptemp[1] &= 0x7C; + ptemp[2] = SENSORS_LIMIT( + ptemp[2], ptemp[1] + 1, + 255); + break; + case 2: + ptemp[2] = SENSORS_LIMIT( + val / 1000, + ptemp[1]+1, + 255); + break; + default: + dev_dbg(dev, "Unknown attr->index (%d).\n", ix); + count = -EINVAL; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, reg, dpwm, ptemp)) + count = -EIO; + +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t set_pwm1_auto_point_pwm( + struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + int dpwm; + long val; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->update_lock); + data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254); + if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP, + data->pwm1_auto_point_pwm[1])) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; + if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm, + data->temp1_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm, + data->temp2_auto_point_temp)) { + count = -EIO; + goto EXIT; + } + +EXIT: + data->valid = 0; + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t get_fan( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + int ix = to_sensor_dev_attr(devattr)->index; + if (0 == data->fan[ix]) + return sprintf(buf, "0"); + return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix])); +} + + + +static ssize_t get_fan1_fault( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + if (data->stat1 & AMC6821_STAT1_FANS) + return sprintf(buf, "1"); + else + return sprintf(buf, "0"); +} + + + +static ssize_t set_fan( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int ix = to_sensor_dev_attr(attr)->index; + int ret = strict_strtol(buf, 10, &val); + if (ret) + return ret; + val = 1 > val ? 0xFFFF : 6000000/val; + + mutex_lock(&data->update_lock); + data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF); + if (i2c_smbus_write_byte_data(client, fan_reg_low[ix], + data->fan[ix] & 0xFF)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, + fan_reg_hi[ix], data->fan[ix] >> 8)) { + dev_err(&client->dev, "Register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static ssize_t get_fan1_div( + struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct amc6821_data *data = amc6821_update_device(dev); + return sprintf(buf, "%d\n", data->fan1_div); +} + +static ssize_t set_fan1_div( + struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct amc6821_data *data = i2c_get_clientdata(client); + long val; + int config = strict_strtol(buf, 10, &val); + if (config) + return config; + + config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); + if (config < 0) { + dev_err(&client->dev, + "Error reading configuration register, aborting.\n"); + return -EIO; + } + mutex_lock(&data->update_lock); + switch (val) { + case 2: + config &= ~AMC6821_CONF4_PSPR; + data->fan1_div = 2; + break; + case 4: + config |= AMC6821_CONF4_PSPR; + data->fan1_div = 4; + break; + default: + mutex_unlock(&data->update_lock); + count = -EINVAL; + goto EXIT; + } + if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) { + dev_err(&client->dev, + "Configuration register write error, aborting.\n"); + count = -EIO; + } +EXIT: + mutex_unlock(&data->update_lock); + return count; +} + + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + get_temp, NULL, IDX_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MIN); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_MAX); +static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP1_CRIT); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR, + get_temp, NULL, IDX_TEMP2_INPUT); +static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp, + set_temp, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, + get_temp2_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MIN); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_MAX); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, + get_temp_alarm, NULL, IDX_TEMP2_CRIT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MIN); +static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR, + get_fan, set_fan, IDX_FAN1_MAX); +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, + get_fan1_div, set_fan1_div, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0); +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + get_pwm1_enable, set_pwm1_enable, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 0); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, + get_pwm1_auto_point_pwm, NULL, 2); +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO, + get_pwm1_auto_channels_temp, NULL, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO, + get_temp_auto_point_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1); +static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2); + +static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1); +static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO, + get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2); + + + +static struct attribute *amc6821_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_max.dev_attr.attr, + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_fan1_div.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr, + NULL +}; + +static struct attribute_group amc6821_attr_grp = { + .attrs = amc6821_attrs, +}; + + + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int amc6821_detect( + struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; + int dev_id, comp_id; + + dev_dbg(&adapter->dev, "amc6821_detect called.\n"); + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&adapter->dev, + "amc6821: I2C bus doesn't support byte mode, " + "skipping.\n"); + return -ENODEV; + } + + dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + /* Bit 7 of the address register is ignored, so we can check the + ID registers again */ + dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID); + comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID); + if (dev_id != 0x21 || comp_id != 0x49) { + dev_dbg(&adapter->dev, + "amc6821: detection failed at 0x%02x.\n", + address); + return -ENODEV; + } + + dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address); + strlcpy(info->type, "amc6821", I2C_NAME_SIZE); + + return 0; +} + +static int amc6821_probe( + struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct amc6821_data *data; + int err; + + data = kzalloc(sizeof(struct amc6821_data), GFP_KERNEL); + if (!data) { + dev_err(&client->dev, "out of memory.\n"); + return -ENOMEM; + } + + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* + * Initialize the amc6821 chip + */ + err = amc6821_init_client(client); + if (err) + goto err_free; + + err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp); + if (err) + goto err_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (!IS_ERR(data->hwmon_dev)) + return 0; + + err = PTR_ERR(data->hwmon_dev); + dev_err(&client->dev, "error registering hwmon device.\n"); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); +err_free: + kfree(data); + return err; +} + +static int amc6821_remove(struct i2c_client *client) +{ + struct amc6821_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp); + + kfree(data); + + return 0; +} + + +static int amc6821_init_client(struct i2c_client *client) +{ |