aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon/lm90.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/lm90.c')
-rw-r--r--drivers/hwmon/lm90.c89
1 files changed, 84 insertions, 5 deletions
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 7c9bdc16742..7cc2708871a 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1,7 +1,7 @@
/*
* lm90.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
*
* Based on the lm83 driver. The LM90 is a sensor chip made by National
* Semiconductor. It reports up to two temperatures (its own plus up to
@@ -93,7 +93,8 @@
static const unsigned short normal_i2c[] = {
0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
-enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646 };
+enum chips { lm90, adm1032, lm99, lm86, max6657, adt7461, max6680, max6646,
+ w83l771 };
/*
* The LM90 registers
@@ -151,6 +152,7 @@ static int lm90_detect(struct i2c_client *client, struct i2c_board_info *info);
static int lm90_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static void lm90_init_client(struct i2c_client *client);
+static void lm90_alert(struct i2c_client *client, unsigned int flag);
static int lm90_remove(struct i2c_client *client);
static struct lm90_data *lm90_update_device(struct device *dev);
@@ -173,6 +175,7 @@ static const struct i2c_device_id lm90_id[] = {
{ "max6659", max6657 },
{ "max6680", max6680 },
{ "max6681", max6680 },
+ { "w83l771", w83l771 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm90_id);
@@ -184,6 +187,7 @@ static struct i2c_driver lm90_driver = {
},
.probe = lm90_probe,
.remove = lm90_remove,
+ .alert = lm90_alert,
.id_table = lm90_id,
.detect = lm90_detect,
.address_list = normal_i2c,
@@ -201,6 +205,9 @@ struct lm90_data {
int kind;
int flags;
+ u8 config_orig; /* Original configuration register value */
+ u8 alert_alarms; /* Which alarm bits trigger ALERT# */
+
/* registers values */
s8 temp8[4]; /* 0: local low limit
1: local high limit
@@ -758,6 +765,14 @@ static int lm90_detect(struct i2c_client *new_client,
&& reg_convrate <= 0x07) {
name = "max6646";
}
+ } else
+ if (address == 0x4C
+ && man_id == 0x5C) { /* Winbond/Nuvoton */
+ if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
+ && (reg_config1 & 0x2A) == 0x00
+ && reg_convrate <= 0x08) {
+ name = "w83l771";
+ }
}
if (!name) { /* identification failed */
@@ -794,6 +809,19 @@ static int lm90_probe(struct i2c_client *new_client,
new_client->flags &= ~I2C_CLIENT_PEC;
}
+ /* Different devices have different alarm bits triggering the
+ * ALERT# output */
+ switch (data->kind) {
+ case lm90:
+ case lm99:
+ case lm86:
+ data->alert_alarms = 0x7b;
+ break;
+ default:
+ data->alert_alarms = 0x7c;
+ break;
+ }
+
/* Initialize the LM90 chip */
lm90_init_client(new_client);
@@ -830,7 +858,7 @@ exit:
static void lm90_init_client(struct i2c_client *client)
{
- u8 config, config_orig;
+ u8 config;
struct lm90_data *data = i2c_get_clientdata(client);
/*
@@ -842,7 +870,7 @@ static void lm90_init_client(struct i2c_client *client)
dev_warn(&client->dev, "Initialization failed!\n");
return;
}
- config_orig = config;
+ data->config_orig = config;
/* Check Temperature Range Select */
if (data->kind == adt7461) {
@@ -860,7 +888,7 @@ static void lm90_init_client(struct i2c_client *client)
}
config &= 0xBF; /* run */
- if (config != config_orig) /* Only write if changed */
+ if (config != data->config_orig) /* Only write if changed */
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
}
@@ -875,10 +903,46 @@ static int lm90_remove(struct i2c_client *client)
device_remove_file(&client->dev,
&sensor_dev_attr_temp2_offset.dev_attr);
+ /* Restore initial configuration */
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+ data->config_orig);
+
kfree(data);
return 0;
}
+static void lm90_alert(struct i2c_client *client, unsigned int flag)
+{
+ struct lm90_data *data = i2c_get_clientdata(client);
+ u8 config, alarms;
+
+ lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
+ if ((alarms & 0x7f) == 0) {
+ dev_info(&client->dev, "Everything OK\n");
+ } else {
+ if (alarms & 0x61)
+ dev_warn(&client->dev,
+ "temp%d out of range, please check!\n", 1);
+ if (alarms & 0x1a)
+ dev_warn(&client->dev,
+ "temp%d out of range, please check!\n", 2);
+ if (alarms & 0x04)
+ dev_warn(&client->dev,
+ "temp%d diode open, please check!\n", 2);
+
+ /* Disable ALERT# output, because these chips don't implement
+ SMBus alert correctly; they should only hold the alert line
+ low briefly. */
+ if ((data->kind == adm1032 || data->kind == adt7461)
+ && (alarms & data->alert_alarms)) {
+ dev_dbg(&client->dev, "Disabling ALERT#\n");
+ lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+ config | 0x80);
+ }
+ }
+}
+
static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
{
int err;
@@ -966,6 +1030,21 @@ static struct lm90_data *lm90_update_device(struct device *dev)
}
lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
+ /* Re-enable ALERT# output if it was originally enabled and
+ * relevant alarms are all clear */
+ if ((data->config_orig & 0x80) == 0
+ && (data->alarms & data->alert_alarms) == 0) {
+ u8 config;
+
+ lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+ if (config & 0x80) {
+ dev_dbg(&client->dev, "Re-enabling ALERT#\n");
+ i2c_smbus_write_byte_data(client,
+ LM90_REG_W_CONFIG1,
+ config & ~0x80);
+ }
+ }
+
data->last_updated = jiffies;
data->valid = 1;
}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-28 13:09:38 +0000