diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 50 |
1 files changed, 33 insertions, 17 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 02260406b9e..8deedc1b984 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -253,7 +253,8 @@ config SENSORS_K10TEMP If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of the AMD Family 10h and all revisions of the AMD Family 11h, - 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures. + 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity) + microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp. @@ -425,7 +426,7 @@ config SENSORS_GL520SM config SENSORS_GPIO_FAN tristate "GPIO fan" - depends on GENERIC_GPIO + depends on GPIOLIB help If you say yes here you get support for fans connected to GPIO lines. @@ -497,8 +498,9 @@ config SENSORS_JC42 If you say yes here, you get support for JEDEC JC42.4 compliant temperature sensors, which are used on many DDR3 memory modules for mobile devices and servers. Support will include, but not be limited - to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, - MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. + to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, + MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, + STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. This driver can also be built as a module. If so, the module will be called jc42. @@ -597,11 +599,11 @@ config SENSORS_LM78 will be called lm78. config SENSORS_LM80 - tristate "National Semiconductor LM80" + tristate "National Semiconductor LM80 and LM96080" depends on I2C help If you say yes here you get support for National Semiconductor - LM80 sensor chips. + LM80 and LM96080 sensor chips. This driver can also be built as a module. If so, the module will be called lm80. @@ -647,7 +649,8 @@ config SENSORS_LM90 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, - Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips. + Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781 + sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -811,6 +814,16 @@ config SENSORS_MAX6650 This driver can also be built as a module. If so, the module will be called max6650. +config SENSORS_MCP3021 + tristate "Microchip MCP3021" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the MCP3021 chip + that is a A/D converter (ADC) with 10-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + config SENSORS_NTC_THERMISTOR tristate "NTC thermistor support" depends on EXPERIMENTAL @@ -871,7 +884,7 @@ source drivers/hwmon/pmbus/Kconfig config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." - depends on GENERIC_GPIO + depends on GPIOLIB help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. @@ -1027,7 +1040,8 @@ config SENSORS_SCH5627 select SENSORS_SCH56XX_COMMON help If you say yes here you get support for the hardware monitoring - features of the SMSC SCH5627 Super-I/O chip. + features of the SMSC SCH5627 Super-I/O chip including support for + the integrated watchdog. This driver can also be built as a module. If so, the module will be called sch5627. @@ -1043,7 +1057,8 @@ config SENSORS_SCH5636 Currently this driver only supports the Fujitsu Theseus SCH5636 based hwmon solution. Say yes here if you want support for the Fujitsu - Theseus' hardware monitoring features. + Theseus' hardware monitoring features including support for the + integrated watchdog. This driver can also be built as a module. If so, the module will be called sch5636. @@ -1226,18 +1241,19 @@ config SENSORS_W83795 depends on I2C && EXPERIMENTAL help If you say yes here you get support for the Winbond W83795G and - W83795ADG hardware monitoring chip. + W83795ADG hardware monitoring chip, including manual fan speed + control. This driver can also be built as a module. If so, the module will be called w83795. config SENSORS_W83795_FANCTRL - boolean "Include fan control support (DANGEROUS)" + boolean "Include automatic fan control support (DANGEROUS)" depends on SENSORS_W83795 && EXPERIMENTAL default n help - If you say yes here, support for the both manual and automatic - fan control features will be included in the driver. + If you say yes here, support for automatic fan speed control + will be included in the driver. This part of the code wasn't carefully reviewed and tested yet, so enabling this option is strongly discouraged on production @@ -1355,10 +1371,10 @@ config SENSORS_APPLESMC the awesome power of applesmc. config SENSORS_MC13783_ADC - tristate "Freescale MC13783 ADC" - depends on MFD_MC13783 + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX help - Support for the A/D converter on MC13783 PMIC. + Support for the A/D converter on MC13783 and MC13892 PMIC. if ACPI |