diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 94 |
1 files changed, 84 insertions, 10 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 9be8e1754a0..f3adf18bfa0 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -332,11 +332,11 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" + tristate "Fintek F71808E, F71858FG, F71862FG, F71882FG, F71889FG and F8000" depends on EXPERIMENTAL help - If you say yes here you get support for hardware monitoring - features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, + If you say yes here you get support for hardware monitoring features + of the Fintek F71808E, F71858FG, F71862FG/71863FG, F71882FG/F71883FG, F71889FG and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module @@ -405,7 +405,14 @@ config SENSORS_CORETEMP help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs - are supported. Check documentation/driver for details. + are supported. Check Documentation/hwmon/coretemp for details. + +config SENSORS_PKGTEMP + tristate "Intel processor package temperature sensor" + depends on X86 && PCI && EXPERIMENTAL + help + If you say yes here you get support for the package level temperature + sensor inside your CPU. Check documentation/driver for details. config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" @@ -446,14 +453,36 @@ config SENSORS_IT87 This driver can also be built as a module. If so, the module will be called it87. +config SENSORS_JZ4740 + tristate "Ingenic JZ4740 SoC ADC driver" + depends on MACH_JZ4740 && MFD_JZ4740_ADC + help + If you say yes here you get support for reading adc values from the ADCIN + pin on Ingenic JZ4740 SoC based boards. + + This driver can also be build as a module. If so, the module will be + called jz4740-hwmon. + +config SENSORS_JC42 + tristate "JEDEC JC42.4 compliant temperature sensors" + help + If you say yes here you get support for Jedec JC42.4 compliant + temperature sensors. Support will include, but not be limited to, + ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, + MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3. + + This driver can also be built as a module. If so, the module + will be called jc42. + config SENSORS_LM63 - tristate "National Semiconductor LM63" + tristate "National Semiconductor LM63 and LM64" depends on I2C help - If you say yes here you get support for the National Semiconductor - LM63 remote diode digital temperature sensor with integrated fan - control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) - motherboard, among others. + If you say yes here you get support for the National + Semiconductor LM63 and LM64 remote diode digital temperature + sensors with integrated fan control. Such chips are found + on the Tyan S4882 (Thunder K8QS Pro) motherboard, among + others. This driver can also be built as a module. If so, the module will be called lm63. @@ -492,7 +521,8 @@ config SENSORS_LM75 - NXP's LM75A - ST Microelectronics STDS75 - TelCom (now Microchip) TCN75 - - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 + - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, + TMP275 This driver supports driver model based binding through board specific I2C device tables. @@ -737,6 +767,21 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C && EXPERIMENTAL + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && EXPERIMENTAL @@ -749,6 +794,16 @@ config SENSORS_DME1737 This driver can also be built as a module. If so, the module will be called dme1737. +config SENSORS_EMC1403 + tristate "SMSC EMC1403 thermal sensor" + depends on I2C + help + If you say yes here you get support for the SMSC EMC1403 + temperature monitoring chip. + + Threshold values can be configured using sysfs. + Data from the different diodes are accessible via sysfs. + config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" help @@ -802,6 +857,15 @@ config SENSORS_ADS7828 This driver can also be built as a module. If so, the module will be called ads7828. +config SENSORS_ADS7871 + tristate "Texas Instruments ADS7871 A/D converter" + depends on SPI + help + If you say yes here you get support for TI ADS7871 & ADS7870 + + This driver can also be built as a module. If so, the module + will be called ads7871. + config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" depends on I2C && EXPERIMENTAL @@ -822,6 +886,16 @@ config SENSORS_THMC50 This driver can also be built as a module. If so, the module will be called thmc50. +config SENSORS_TMP102 + tristate "Texas Instruments TMP102" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments TMP102 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp102. + config SENSORS_TMP401 tristate "Texas Instruments TMP401 and compatibles" depends on I2C && EXPERIMENTAL |