diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/radeon_i2c.c')
| -rw-r--r-- | drivers/gpu/drm/radeon/radeon_i2c.c | 73 |
1 files changed, 56 insertions, 17 deletions
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 6c645fb4dad..da3da1e89d0 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -69,13 +69,15 @@ void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state) * holds the i2c port in a bad state - switch hw i2c away before * doing DDC - do this for all r200s/r300s/r400s for safety sake */ - if ((rdev->family >= CHIP_R200) && !ASIC_IS_AVIVO(rdev)) { - if (rec->a_clk_reg == RADEON_GPIO_MONID) { - WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST | - R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1))); - } else { - WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST | - R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3))); + if (rec->hw_capable) { + if ((rdev->family >= CHIP_R200) && !ASIC_IS_AVIVO(rdev)) { + if (rec->a_clk_reg == RADEON_GPIO_MONID) { + WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST | + R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1))); + } else { + WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST | + R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3))); + } } } @@ -86,6 +88,12 @@ void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state) temp = RREG32(rec->a_data_reg) & ~rec->a_data_mask; WREG32(rec->a_data_reg, temp); + /* set the pins to input */ + temp = RREG32(rec->en_clk_reg) & ~rec->en_clk_mask; + WREG32(rec->en_clk_reg, temp); + + temp = RREG32(rec->en_data_reg) & ~rec->en_data_mask; + WREG32(rec->en_data_reg, temp); /* mask the gpio pins for software use */ temp = RREG32(rec->mask_clk_reg); @@ -172,20 +180,19 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev, return NULL; i2c->adapter.owner = THIS_MODULE; - i2c->adapter.algo_data = &i2c->algo; i2c->dev = dev; - i2c->algo.setsda = set_data; - i2c->algo.setscl = set_clock; - i2c->algo.getsda = get_data; - i2c->algo.getscl = get_clock; - i2c->algo.udelay = 20; + i2c_set_adapdata(&i2c->adapter, i2c); + i2c->adapter.algo_data = &i2c->algo.bit; + i2c->algo.bit.setsda = set_data; + i2c->algo.bit.setscl = set_clock; + i2c->algo.bit.getsda = get_data; + i2c->algo.bit.getscl = get_clock; + i2c->algo.bit.udelay = 20; /* vesa says 2.2 ms is enough, 1 jiffy doesn't seem to always * make this, 2 jiffies is a lot more reliable */ - i2c->algo.timeout = 2; - i2c->algo.data = i2c; + i2c->algo.bit.timeout = 2; + i2c->algo.bit.data = i2c; i2c->rec = *rec; - i2c_set_adapdata(&i2c->adapter, i2c); - ret = i2c_bit_add_bus(&i2c->adapter); if (ret) { DRM_INFO("Failed to register i2c %s\n", name); @@ -199,6 +206,38 @@ out_free: } +struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev, + struct radeon_i2c_bus_rec *rec, + const char *name) +{ + struct radeon_i2c_chan *i2c; + int ret; + + i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL); + if (i2c == NULL) + return NULL; + + i2c->rec = *rec; + i2c->adapter.owner = THIS_MODULE; + i2c->dev = dev; + i2c_set_adapdata(&i2c->adapter, i2c); + i2c->adapter.algo_data = &i2c->algo.dp; + i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch; + i2c->algo.dp.address = 0; + ret = i2c_dp_aux_add_bus(&i2c->adapter); + if (ret) { + DRM_INFO("Failed to register i2c %s\n", name); + goto out_free; + } + + return i2c; +out_free: + kfree(i2c); + return NULL; + +} + + void radeon_i2c_destroy(struct radeon_i2c_chan *i2c) { if (!i2c) |