diff options
Diffstat (limited to 'drivers/gpu/drm/omapdrm')
22 files changed, 8236 insertions, 0 deletions
diff --git a/drivers/gpu/drm/omapdrm/Kconfig b/drivers/gpu/drm/omapdrm/Kconfig new file mode 100644 index 00000000000..09f65dc3d2c --- /dev/null +++ b/drivers/gpu/drm/omapdrm/Kconfig @@ -0,0 +1,25 @@ + +config DRM_OMAP + tristate "OMAP DRM" + depends on DRM && !CONFIG_FB_OMAP2 + depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM + depends on OMAP2_DSS + select DRM_KMS_HELPER + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + default n + help + DRM display driver for OMAP2/3/4 based boards. + +config DRM_OMAP_NUM_CRTCS + int "Number of CRTCs" + range 1 10 + default 1 if ARCH_OMAP2 || ARCH_OMAP3 + default 2 if ARCH_OMAP4 + depends on DRM_OMAP + help + Select the number of video overlays which can be used as framebuffers. + The remaining overlays are reserved for video. + diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile new file mode 100644 index 00000000000..d85e058f284 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/Makefile @@ -0,0 +1,24 @@ +# +# Makefile for the drm device driver. This driver provides support for the +# Direct Rendering Infrastructure (DRI) +# + +ccflags-y := -Iinclude/drm -Werror +omapdrm-y := omap_drv.o \ + omap_irq.o \ + omap_debugfs.o \ + omap_crtc.o \ + omap_plane.o \ + omap_encoder.o \ + omap_connector.o \ + omap_fb.o \ + omap_fbdev.o \ + omap_gem.o \ + omap_gem_dmabuf.o \ + omap_dmm_tiler.o \ + tcm-sita.o + +# temporary: +omapdrm-y += omap_gem_helpers.o + +obj-$(CONFIG_DRM_OMAP) += omapdrm.o diff --git a/drivers/gpu/drm/omapdrm/TODO b/drivers/gpu/drm/omapdrm/TODO new file mode 100644 index 00000000000..4d8c18aa5dd --- /dev/null +++ b/drivers/gpu/drm/omapdrm/TODO @@ -0,0 +1,23 @@ +TODO +. Where should we do eviction (detatch_pages())? We aren't necessarily + accessing the pages via a GART, so maybe we need some other threshold + to put a cap on the # of pages that can be pin'd. + . Use mm_shrinker to trigger unpinning pages. + . This is mainly theoretical since most of these devices don't actually + have swap or harddrive. +. GEM/shmem backed pages can have existing mappings (kernel linear map, + etc..), which isn't really ideal. +. Revisit GEM sync object infrastructure.. TTM has some framework for this + already. Possibly this could be refactored out and made more common? + There should be some way to do this with less wheel-reinvention. + . This can be handled by the dma-buf fence/reservation stuff when it + lands + +Userspace: +. git://anongit.freedesktop.org/xorg/driver/xf86-video-omap + +Currently tested on +. OMAP3530 beagleboard +. OMAP4430 pandaboard +. OMAP4460 pandaboard +. OMAP5432 uEVM diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c new file mode 100644 index 00000000000..c451c41a7a7 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_connector.c @@ -0,0 +1,296 @@ +/* + * drivers/gpu/drm/omapdrm/omap_connector.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +/* + * connector funcs + */ + +#define to_omap_connector(x) container_of(x, struct omap_connector, base) + +struct omap_connector { + struct drm_connector base; + struct omap_dss_device *dssdev; + struct drm_encoder *encoder; +}; + +void copy_timings_omap_to_drm(struct drm_display_mode *mode, + struct omap_video_timings *timings) +{ + mode->clock = timings->pixel_clock; + + mode->hdisplay = timings->x_res; + mode->hsync_start = mode->hdisplay + timings->hfp; + mode->hsync_end = mode->hsync_start + timings->hsw; + mode->htotal = mode->hsync_end + timings->hbp; + + mode->vdisplay = timings->y_res; + mode->vsync_start = mode->vdisplay + timings->vfp; + mode->vsync_end = mode->vsync_start + timings->vsw; + mode->vtotal = mode->vsync_end + timings->vbp; + + mode->flags = 0; + + if (timings->interlace) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; +} + +void copy_timings_drm_to_omap(struct omap_video_timings *timings, + struct drm_display_mode *mode) +{ + timings->pixel_clock = mode->clock; + + timings->x_res = mode->hdisplay; + timings->hfp = mode->hsync_start - mode->hdisplay; + timings->hsw = mode->hsync_end - mode->hsync_start; + timings->hbp = mode->htotal - mode->hsync_end; + + timings->y_res = mode->vdisplay; + timings->vfp = mode->vsync_start - mode->vdisplay; + timings->vsw = mode->vsync_end - mode->vsync_start; + timings->vbp = mode->vtotal - mode->vsync_end; + + timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; + timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; + timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; +} + +static enum drm_connector_status omap_connector_detect( + struct drm_connector *connector, bool force) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + enum drm_connector_status ret; + + if (dssdrv->detect) { + if (dssdrv->detect(dssdev)) + ret = connector_status_connected; + else + ret = connector_status_disconnected; + } else { + ret = connector_status_unknown; + } + + VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force); + + return ret; +} + +static void omap_connector_destroy(struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + + DBG("%s", omap_connector->dssdev->name); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(omap_connector); + + omap_dss_put_device(dssdev); +} + +#define MAX_EDID 512 + +static int omap_connector_get_modes(struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct drm_device *dev = connector->dev; + int n = 0; + + DBG("%s", omap_connector->dssdev->name); + + /* if display exposes EDID, then we parse that in the normal way to + * build table of supported modes.. otherwise (ie. fixed resolution + * LCD panels) we just return a single mode corresponding to the + * currently configured timings: + */ + if (dssdrv->read_edid) { + void *edid = kzalloc(MAX_EDID, GFP_KERNEL); + + if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) && + drm_edid_is_valid(edid)) { + drm_mode_connector_update_edid_property( + connector, edid); + n = drm_add_edid_modes(connector, edid); + } else { + drm_mode_connector_update_edid_property( + connector, NULL); + } + kfree(edid); + } else { + struct drm_display_mode *mode = drm_mode_create(dev); + struct omap_video_timings timings = {0}; + + dssdrv->get_timings(dssdev, &timings); + + copy_timings_omap_to_drm(mode, &timings); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + n = 1; + } + + return n; +} + +static int omap_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct omap_video_timings timings = {0}; + struct drm_device *dev = connector->dev; + struct drm_display_mode *new_mode; + int ret = MODE_BAD; + + copy_timings_drm_to_omap(&timings, mode); + mode->vrefresh = drm_mode_vrefresh(mode); + + if (!dssdrv->check_timings(dssdev, &timings)) { + /* check if vrefresh is still valid */ + new_mode = drm_mode_duplicate(dev, mode); + new_mode->clock = timings.pixel_clock; + new_mode->vrefresh = 0; + if (mode->vrefresh == drm_mode_vrefresh(new_mode)) + ret = MODE_OK; + drm_mode_destroy(dev, new_mode); + } + + DBG("connector: mode %s: " + "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + (ret == MODE_OK) ? "valid" : "invalid", + mode->base.id, mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, mode->type, mode->flags); + + return ret; +} + +struct drm_encoder *omap_connector_attached_encoder( + struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + return omap_connector->encoder; +} + +static const struct drm_connector_funcs omap_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = omap_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = omap_connector_destroy, +}; + +static const struct drm_connector_helper_funcs omap_connector_helper_funcs = { + .get_modes = omap_connector_get_modes, + .mode_valid = omap_connector_mode_valid, + .best_encoder = omap_connector_attached_encoder, +}; + +/* flush an area of the framebuffer (in case of manual update display that + * is not automatically flushed) + */ +void omap_connector_flush(struct drm_connector *connector, + int x, int y, int w, int h) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + + /* TODO: enable when supported in dss */ + VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h); +} + +/* initialize connector */ +struct drm_connector *omap_connector_init(struct drm_device *dev, + int connector_type, struct omap_dss_device *dssdev, + struct drm_encoder *encoder) +{ + struct drm_connector *connector = NULL; + struct omap_connector *omap_connector; + + DBG("%s", dssdev->name); + + omap_dss_get_device(dssdev); + + omap_connector = kzalloc(sizeof(struct omap_connector), GFP_KERNEL); + if (!omap_connector) + goto fail; + + omap_connector->dssdev = dssdev; + omap_connector->encoder = encoder; + + connector = &omap_connector->base; + + drm_connector_init(dev, connector, &omap_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &omap_connector_helper_funcs); + +#if 0 /* enable when dss2 supports hotplug */ + if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_HPD) + connector->polled = 0; + else +#endif + connector->polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + + connector->interlace_allowed = 1; + connector->doublescan_allowed = 0; + + drm_sysfs_connector_add(connector); + + return connector; + +fail: + if (connector) + omap_connector_destroy(connector); + + return NULL; +} diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c new file mode 100644 index 00000000000..bec66a490b8 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c @@ -0,0 +1,654 @@ +/* + * drivers/gpu/drm/omapdrm/omap_crtc.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "omap_drv.h" + +#include <drm/drm_mode.h> +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +#define to_omap_crtc(x) container_of(x, struct omap_crtc, base) + +struct omap_crtc { + struct drm_crtc base; + struct drm_plane *plane; + + const char *name; + int pipe; + enum omap_channel channel; + struct omap_overlay_manager_info info; + + /* + * Temporary: eventually this will go away, but it is needed + * for now to keep the output's happy. (They only need + * mgr->id.) Eventually this will be replaced w/ something + * more common-panel-framework-y + */ + struct omap_overlay_manager mgr; + + struct omap_video_timings timings; + bool enabled; + bool full_update; + + struct omap_drm_apply apply; + + struct omap_drm_irq apply_irq; + struct omap_drm_irq error_irq; + + /* list of in-progress apply's: */ + struct list_head pending_applies; + + /* list of queued apply's: */ + struct list_head queued_applies; + + /* for handling queued and in-progress applies: */ + struct work_struct apply_work; + + /* if there is a pending flip, these will be non-null: */ + struct drm_pending_vblank_event *event; + struct drm_framebuffer *old_fb; + + /* for handling page flips without caring about what + * the callback is called from. Possibly we should just + * make omap_gem always call the cb from the worker so + * we don't have to care about this.. + * + * XXX maybe fold into apply_work?? + */ + struct work_struct page_flip_work; +}; + +/* + * Manager-ops, callbacks from output when they need to configure + * the upstream part of the video pipe. + * + * Most of these we can ignore until we add support for command-mode + * panels.. for video-mode the crtc-helpers already do an adequate + * job of sequencing the setup of the video pipe in the proper order + */ + +/* we can probably ignore these until we support command-mode panels: */ +static void omap_crtc_start_update(struct omap_overlay_manager *mgr) +{ +} + +static int omap_crtc_enable(struct omap_overlay_manager *mgr) +{ + return 0; +} + +static void omap_crtc_disable(struct omap_overlay_manager *mgr) +{ +} + +static void omap_crtc_set_timings(struct omap_overlay_manager *mgr, + const struct omap_video_timings *timings) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + omap_crtc->timings = *timings; + omap_crtc->full_update = true; +} + +static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr, + const struct dss_lcd_mgr_config *config) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + dispc_mgr_set_lcd_config(omap_crtc->channel, config); +} + +static int omap_crtc_register_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ + return 0; +} + +static void omap_crtc_unregister_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ +} + +static const struct dss_mgr_ops mgr_ops = { + .start_update = omap_crtc_start_update, + .enable = omap_crtc_enable, + .disable = omap_crtc_disable, + .set_timings = omap_crtc_set_timings, + .set_lcd_config = omap_crtc_set_lcd_config, + .register_framedone_handler = omap_crtc_register_framedone_handler, + .unregister_framedone_handler = omap_crtc_unregister_framedone_handler, +}; + +/* + * CRTC funcs: + */ + +static void omap_crtc_destroy(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s", omap_crtc->name); + + WARN_ON(omap_crtc->apply_irq.registered); + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + + omap_crtc->plane->funcs->destroy(omap_crtc->plane); + drm_crtc_cleanup(crtc); + + kfree(omap_crtc); +} + +static void omap_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct omap_drm_private *priv = crtc->dev->dev_private; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + bool enabled = (mode == DRM_MODE_DPMS_ON); + int i; + + DBG("%s: %d", omap_crtc->name, mode); + + if (enabled != omap_crtc->enabled) { + omap_crtc->enabled = enabled; + omap_crtc->full_update = true; + omap_crtc_apply(crtc, &omap_crtc->apply); + + /* also enable our private plane: */ + WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); + + /* and any attached overlay planes: */ + for (i = 0; i < priv->num_planes; i++) { + struct drm_plane *plane = priv->planes[i]; + if (plane->crtc == crtc) + WARN_ON(omap_plane_dpms(plane, mode)); + } + } +} + +static bool omap_crtc_mode_fixup(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static int omap_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + mode = adjusted_mode; + + DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + omap_crtc->name, mode->base.id, mode->name, + mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, + mode->type, mode->flags); + + copy_timings_drm_to_omap(&omap_crtc->timings, mode); + omap_crtc->full_update = true; + + return omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + x << 16, y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); +} + +static void omap_crtc_prepare(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->name); + omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void omap_crtc_commit(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->name); + omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON); +} + +static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_plane *plane = omap_crtc->plane; + struct drm_display_mode *mode = &crtc->mode; + + return omap_plane_mode_set(plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + x << 16, y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); +} + +static void omap_crtc_load_lut(struct drm_crtc *crtc) +{ +} + +static void vblank_cb(void *arg) +{ + struct drm_crtc *crtc = arg; + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + unsigned long flags; + + spin_lock_irqsave(&dev->event_lock, flags); + + /* wakeup userspace */ + if (omap_crtc->event) + drm_send_vblank_event(dev, omap_crtc->pipe, omap_crtc->event); + + omap_crtc->event = NULL; + omap_crtc->old_fb = NULL; + + spin_unlock_irqrestore(&dev->event_lock, flags); +} + +static void page_flip_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, page_flip_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_display_mode *mode = &crtc->mode; + struct drm_gem_object *bo; + + mutex_lock(&crtc->mutex); + omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + crtc->x << 16, crtc->y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + vblank_cb, crtc); + mutex_unlock(&crtc->mutex); + + bo = omap_framebuffer_bo(crtc->fb, 0); + drm_gem_object_unreference_unlocked(bo); +} + +static void page_flip_cb(void *arg) +{ + struct drm_crtc *crtc = arg; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_drm_private *priv = crtc->dev->dev_private; + + /* avoid assumptions about what ctxt we are called from: */ + queue_work(priv->wq, &omap_crtc->page_flip_work); +} + +static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_gem_object *bo; + + DBG("%d -> %d (event=%p)", crtc->fb ? crtc->fb->base.id : -1, + fb->base.id, event); + + if (omap_crtc->old_fb) { + dev_err(dev->dev, "already a pending flip\n"); + return -EINVAL; + } + + omap_crtc->event = event; + crtc->fb = fb; + + /* + * Hold a reference temporarily until the crtc is updated + * and takes the reference to the bo. This avoids it + * getting freed from under us: + */ + bo = omap_framebuffer_bo(fb, 0); + drm_gem_object_reference(bo); + + omap_gem_op_async(bo, OMAP_GEM_READ, page_flip_cb, crtc); + + return 0; +} + +static int omap_crtc_set_property(struct drm_crtc *crtc, + struct drm_property *property, uint64_t val) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_drm_private *priv = crtc->dev->dev_private; + + if (property == priv->rotation_prop) { + crtc->invert_dimensions = + !!(val & ((1LL << DRM_ROTATE_90) | (1LL << DRM_ROTATE_270))); + } + + return omap_plane_set_property(omap_crtc->plane, property, val); +} + +static const struct drm_crtc_funcs omap_crtc_funcs = { + .set_config = drm_crtc_helper_set_config, + .destroy = omap_crtc_destroy, + .page_flip = omap_crtc_page_flip_locked, + .set_property = omap_crtc_set_property, +}; + +static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = { + .dpms = omap_crtc_dpms, + .mode_fixup = omap_crtc_mode_fixup, + .mode_set = omap_crtc_mode_set, + .prepare = omap_crtc_prepare, + .commit = omap_crtc_commit, + .mode_set_base = omap_crtc_mode_set_base, + .load_lut = omap_crtc_load_lut, +}; + +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return &omap_crtc->timings; +} + +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return omap_crtc->channel; +} + +static void omap_crtc_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, error_irq); + struct drm_crtc *crtc = &omap_crtc->base; + DRM_ERROR("%s: errors: %08x\n", omap_crtc->name, irqstatus); + /* avoid getting in a flood, unregister the irq until next vblank */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_apply_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, apply_irq); + struct drm_crtc *crtc = &omap_crtc->base; + + if (!omap_crtc->error_irq.registered) + omap_irq_register(crtc->dev, &omap_crtc->error_irq); + + if (!dispc_mgr_go_busy(omap_crtc->channel)) { + struct omap_drm_private *priv = + crtc->dev->dev_private; + DBG("%s: apply done", omap_crtc->name); + omap_irq_unregister(crtc->dev, &omap_crtc->apply_irq); + queue_work(priv->wq, &omap_crtc->apply_work); + } +} + +static void apply_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, apply_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct omap_drm_apply *apply, *n; + bool need_apply; + + /* + * Synchronize everything on mode_config.mutex, to keep + * the callbacks and list modification all serialized + * with respect to modesetting ioctls from userspace. + */ + mutex_lock(&crtc->mutex); + dispc_runtime_get(); + + /* + * If we are still pending a previous update, wait.. when the + * pending update completes, we get kicked again. + */ + if (omap_crtc->apply_irq.registered) + goto out; + + /* finish up previous apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->pending_applies, pending_node) { + apply->post_apply(apply); + list_del(&apply->pending_node); + } + + need_apply = !list_empty(&omap_crtc->queued_applies); + + /* then handle the next round of of queued apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->queued_applies, queued_node) { + apply->pre_apply(apply); + list_del(&apply->queued_node); + apply->queued = false; + list_add_tail(&apply->pending_node, + &omap_crtc->pending_applies); + } + + if (need_apply) { + enum omap_channel channel = omap_crtc->channel; + + DBG("%s: GO", omap_crtc->name); + + if (dispc_mgr_is_enabled(channel)) { + omap_irq_register(dev, &omap_crtc->apply_irq); + dispc_mgr_go(channel); + } else { + struct omap_drm_private *priv = dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + } + +out: + dispc_runtime_put(); + mutex_unlock(&crtc->mutex); +} + +int omap_crtc_apply(struct drm_crtc *crtc, + struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + WARN_ON(!mutex_is_locked(&crtc->mutex)); + + /* no need to queue it again if it is already queued: */ + if (apply->queued) + return 0; + + apply->queued = true; + list_add_tail(&apply->queued_node, &omap_crtc->queued_applies); + + /* + * If there are no currently pending updates, then go ahead and + * kick the worker immediately, otherwise it will run again when + * the current update finishes. + */ + if (list_empty(&omap_crtc->pending_applies)) { + struct omap_drm_private *priv = crtc->dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + + return 0; +} + +/* called only from apply */ +static void set_enabled(struct drm_crtc *crtc, bool enable) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + enum omap_channel channel = omap_crtc->channel; + struct omap_irq_wait *wait = NULL; + + if (dispc_mgr_is_enabled(channel) == enable) + return; + + /* ignore sync-lost irqs during enable/disable */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + + if (dispc_mgr_get_framedone_irq(channel)) { + if (!enable) { + wait = omap_irq_wait_init(dev, + dispc_mgr_get_framedone_irq(channel), 1); + } + } else { + /* + * When we disable digit output, we need to wait until fields + * are done. Otherwise the DSS is still working, and turning + * off the clocks prevents DSS from going to OFF mode. And when + * enabling, we need to wait for the extra sync losts + */ + wait = omap_irq_wait_init(dev, + dispc_mgr_get_vsync_irq(channel), 2); + } + + dispc_mgr_enable(channel, enable); + + if (wait) { + int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); + if (ret) { + dev_err(dev->dev, "%s: timeout waiting for %s\n", + omap_crtc->name, enable ? "enable" : "disable"); + } + } + + omap_irq_register(crtc->dev, &omap_cr |