diff options
Diffstat (limited to 'drivers/gpu/drm/omapdrm/omap_gem.c')
| -rw-r--r-- | drivers/gpu/drm/omapdrm/omap_gem.c | 1507 |
1 files changed, 1507 insertions, 0 deletions
diff --git a/drivers/gpu/drm/omapdrm/omap_gem.c b/drivers/gpu/drm/omapdrm/omap_gem.c new file mode 100644 index 00000000000..ebbdf4132e9 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_gem.c @@ -0,0 +1,1507 @@ +/* + * drivers/gpu/drm/omapdrm/omap_gem.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include <linux/spinlock.h> +#include <linux/shmem_fs.h> + +#include "omap_drv.h" +#include "omap_dmm_tiler.h" + +/* remove these once drm core helpers are merged */ +struct page **_drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask); +void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages, + bool dirty, bool accessed); +int _drm_gem_create_mmap_offset_size(struct drm_gem_object *obj, size_t size); + +/* + * GEM buffer object implementation. + */ + +#define to_omap_bo(x) container_of(x, struct omap_gem_object, base) + +/* note: we use upper 8 bits of flags for driver-internal flags: */ +#define OMAP_BO_DMA 0x01000000 /* actually is physically contiguous */ +#define OMAP_BO_EXT_SYNC 0x02000000 /* externally allocated sync object */ +#define OMAP_BO_EXT_MEM 0x04000000 /* externally allocated memory */ + + +struct omap_gem_object { + struct drm_gem_object base; + + struct list_head mm_list; + + uint32_t flags; + + /** width/height for tiled formats (rounded up to slot boundaries) */ + uint16_t width, height; + + /** roll applied when mapping to DMM */ + uint32_t roll; + + /** + * If buffer is allocated physically contiguous, the OMAP_BO_DMA flag + * is set and the paddr is valid. Also if the buffer is remapped in + * TILER and paddr_cnt > 0, then paddr is valid. But if you are using + * the physical address and OMAP_BO_DMA is not set, then you should + * be going thru omap_gem_{get,put}_paddr() to ensure the mapping is + * not removed from under your feet. + * + * Note that OMAP_BO_SCANOUT is a hint from userspace that DMA capable + * buffer is requested, but doesn't mean that it is. Use the + * OMAP_BO_DMA flag to determine if the buffer has a DMA capable + * physical address. + */ + dma_addr_t paddr; + + /** + * # of users of paddr + */ + uint32_t paddr_cnt; + + /** + * tiler block used when buffer is remapped in DMM/TILER. + */ + struct tiler_block *block; + + /** + * Array of backing pages, if allocated. Note that pages are never + * allocated for buffers originally allocated from contiguous memory + */ + struct page **pages; + + /** addresses corresponding to pages in above array */ + dma_addr_t *addrs; + + /** + * Virtual address, if mapped. + */ + void *vaddr; + + /** + * sync-object allocated on demand (if needed) + * + * Per-buffer sync-object for tracking pending and completed hw/dma + * read and write operations. The layout in memory is dictated by + * the SGX firmware, which uses this information to stall the command + * stream if a surface is not ready yet. + * + * Note that when buffer is used by SGX, the sync-object needs to be + * allocated from a special heap of sync-objects. This way many sync + * objects can be packed in a page, and not waste GPU virtual address + * space. Because of this we have to have a omap_gem_set_sync_object() + * API to allow replacement of the syncobj after it has (potentially) + * already been allocated. A bit ugly but I haven't thought of a + * better alternative. + */ + struct { + uint32_t write_pending; + uint32_t write_complete; + uint32_t read_pending; + uint32_t read_complete; + } *sync; +}; + +static int get_pages(struct drm_gem_object *obj, struct page ***pages); +static uint64_t mmap_offset(struct drm_gem_object *obj); + +/* To deal with userspace mmap'ings of 2d tiled buffers, which (a) are + * not necessarily pinned in TILER all the time, and (b) when they are + * they are not necessarily page aligned, we reserve one or more small + * regions in each of the 2d containers to use as a user-GART where we + * can create a second page-aligned mapping of parts of the buffer + * being accessed from userspace. + * + * Note that we could optimize slightly when we know that multiple + * tiler containers are backed by the same PAT.. but I'll leave that + * for later.. + */ +#define NUM_USERGART_ENTRIES 2 +struct usergart_entry { + struct tiler_block *block; /* the reserved tiler block */ + dma_addr_t paddr; + struct drm_gem_object *obj; /* the current pinned obj */ + pgoff_t obj_pgoff; /* page offset of obj currently + mapped in */ +}; +static struct { + struct usergart_entry entry[NUM_USERGART_ENTRIES]; + int height; /* height in rows */ + int height_shift; /* ilog2(height in rows) */ + int slot_shift; /* ilog2(width per slot) */ + int stride_pfn; /* stride in pages */ + int last; /* index of last used entry */ +} *usergart; + +static void evict_entry(struct drm_gem_object *obj, + enum tiler_fmt fmt, struct usergart_entry *entry) +{ + if (obj->dev->dev_mapping) { + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int n = usergart[fmt].height; + size_t size = PAGE_SIZE * n; + loff_t off = mmap_offset(obj) + + (entry->obj_pgoff << PAGE_SHIFT); + const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE); + if (m > 1) { + int i; + /* if stride > than PAGE_SIZE then sparse mapping: */ + for (i = n; i > 0; i--) { + unmap_mapping_range(obj->dev->dev_mapping, + off, PAGE_SIZE, 1); + off += PAGE_SIZE * m; + } + } else { + unmap_mapping_range(obj->dev->dev_mapping, off, size, 1); + } + } + + entry->obj = NULL; +} + +/* Evict a buffer from usergart, if it is mapped there */ +static void evict(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + if (omap_obj->flags & OMAP_BO_TILED) { + enum tiler_fmt fmt = gem2fmt(omap_obj->flags); + int i; + + if (!usergart) + return; + + for (i = 0; i < NUM_USERGART_ENTRIES; i++) { + struct usergart_entry *entry = &usergart[fmt].entry[i]; + if (entry->obj == obj) + evict_entry(obj, fmt, entry); + } + } +} + +/* GEM objects can either be allocated from contiguous memory (in which + * case obj->filp==NULL), or w/ shmem backing (obj->filp!=NULL). But non + * contiguous buffers can be remapped in TILER/DMM if they need to be + * contiguous... but we don't do this all the time to reduce pressure + * on TILER/DMM space when we know at allocation time that the buffer + * will need to be scanned out. + */ +static inline bool is_shmem(struct drm_gem_object *obj) +{ + return obj->filp != NULL; +} + +/** + * shmem buffers that are mapped cached can simulate coherency via using + * page faulting to keep track of dirty pages + */ +static inline bool is_cached_coherent(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + return is_shmem(obj) && + ((omap_obj->flags & OMAP_BO_CACHE_MASK) == OMAP_BO_CACHED); +} + +static DEFINE_SPINLOCK(sync_lock); + +/** ensure backing pages are allocated */ +static int omap_gem_attach_pages(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + struct page **pages; + int npages = obj->size >> PAGE_SHIFT; + int i, ret; + dma_addr_t *addrs; + + WARN_ON(omap_obj->pages); + + /* TODO: __GFP_DMA32 .. but somehow GFP_HIGHMEM is coming from the + * mapping_gfp_mask(mapping) which conflicts w/ GFP_DMA32.. probably + * we actually want CMA memory for it all anyways.. + */ + pages = _drm_gem_get_pages(obj, GFP_KERNEL); + if (IS_ERR(pages)) { + dev_err(obj->dev->dev, "could not get pages: %ld\n", PTR_ERR(pages)); + return PTR_ERR(pages); + } + + /* for non-cached buffers, ensure the new pages are clean because + * DSS, GPU, etc. are not cache coherent: + */ + if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) { + addrs = kmalloc(npages * sizeof(*addrs), GFP_KERNEL); + if (!addrs) { + ret = -ENOMEM; + goto free_pages; + } + + for (i = 0; i < npages; i++) { + addrs[i] = dma_map_page(dev->dev, pages[i], + 0, PAGE_SIZE, DMA_BIDIRECTIONAL); + } + } else { + addrs = kzalloc(npages * sizeof(*addrs), GFP_KERNEL); + if (!addrs) { + ret = -ENOMEM; + goto free_pages; + } + } + + omap_obj->addrs = addrs; + omap_obj->pages = pages; + + return 0; + +free_pages: + _drm_gem_put_pages(obj, pages, true, false); + + return ret; +} + +/** release backing pages */ +static void omap_gem_detach_pages(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + /* for non-cached buffers, ensure the new pages are clean because + * DSS, GPU, etc. are not cache coherent: + */ + if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) { + int i, npages = obj->size >> PAGE_SHIFT; + for (i = 0; i < npages; i++) { + dma_unmap_page(obj->dev->dev, omap_obj->addrs[i], + PAGE_SIZE, DMA_BIDIRECTIONAL); + } + } + + kfree(omap_obj->addrs); + omap_obj->addrs = NULL; + + _drm_gem_put_pages(obj, omap_obj->pages, true, false); + omap_obj->pages = NULL; +} + +/* get buffer flags */ +uint32_t omap_gem_flags(struct drm_gem_object *obj) +{ + return to_omap_bo(obj)->flags; +} + +/** get mmap offset */ +static uint64_t mmap_offset(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + if (!obj->map_list.map) { + /* Make it mmapable */ + size_t size = omap_gem_mmap_size(obj); + int ret = _drm_gem_create_mmap_offset_size(obj, size); + + if (ret) { + dev_err(dev->dev, "could not allocate mmap offset\n"); + return 0; + } + } + + return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT; +} + +uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj) +{ + uint64_t offset; + mutex_lock(&obj->dev->struct_mutex); + offset = mmap_offset(obj); + mutex_unlock(&obj->dev->struct_mutex); + return offset; +} + +/** get mmap size */ +size_t omap_gem_mmap_size(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + size_t size = obj->size; + + if (omap_obj->flags & OMAP_BO_TILED) { + /* for tiled buffers, the virtual size has stride rounded up + * to 4kb.. (to hide the fact that row n+1 might start 16kb or + * 32kb later!). But we don't back the entire buffer with + * pages, only the valid picture part.. so need to adjust for + * this in the size used to mmap and generate mmap offset + */ + size = tiler_vsize(gem2fmt(omap_obj->flags), + omap_obj->width, omap_obj->height); + } + + return size; +} + +/* get tiled size, returns -EINVAL if not tiled buffer */ +int omap_gem_tiled_size(struct drm_gem_object *obj, uint16_t *w, uint16_t *h) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + if (omap_obj->flags & OMAP_BO_TILED) { + *w = omap_obj->width; + *h = omap_obj->height; + return 0; + } + return -EINVAL; +} + +/* Normal handling for the case of faulting in non-tiled buffers */ +static int fault_1d(struct drm_gem_object *obj, + struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + unsigned long pfn; + pgoff_t pgoff; + + /* We don't use vmf->pgoff since that has the fake offset: */ + pgoff = ((unsigned long)vmf->virtual_address - + vma->vm_start) >> PAGE_SHIFT; + + if (omap_obj->pages) { + omap_gem_cpu_sync(obj, pgoff); + pfn = page_to_pfn(omap_obj->pages[pgoff]); + } else { + BUG_ON(!(omap_obj->flags & OMAP_BO_DMA)); + pfn = (omap_obj->paddr >> PAGE_SHIFT) + pgoff; + } + + VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address, + pfn, pfn << PAGE_SHIFT); + + return vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn); +} + +/* Special handling for the case of faulting in 2d tiled buffers */ +static int fault_2d(struct drm_gem_object *obj, + struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + struct usergart_entry *entry; + enum tiler_fmt fmt = gem2fmt(omap_obj->flags); + struct page *pages[64]; /* XXX is this too much to have on stack? */ + unsigned long pfn; + pgoff_t pgoff, base_pgoff; + void __user *vaddr; + int i, ret, slots; + + /* + * Note the height of the slot is also equal to the number of pages + * that need to be mapped in to fill 4kb wide CPU page. If the slot + * height is 64, then 64 pages fill a 4kb wide by 64 row region. + */ + const int n = usergart[fmt].height; + const int n_shift = usergart[fmt].height_shift; + + /* + * If buffer width in bytes > PAGE_SIZE then the virtual stride is + * rounded up to next multiple of PAGE_SIZE.. this need to be taken + * into account in some of the math, so figure out virtual stride + * in pages + */ + const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE); + + /* We don't use vmf->pgoff since that has the fake offset: */ + pgoff = ((unsigned long)vmf->virtual_address - + vma->vm_start) >> PAGE_SHIFT; + + /* + * Actual address we start mapping at is rounded down to previous slot + * boundary in the y direction: + */ + base_pgoff = round_down(pgoff, m << n_shift); + + /* figure out buffer width in slots */ + slots = omap_obj->width >> usergart[fmt].slot_shift; + + vaddr = vmf->virtual_address - ((pgoff - base_pgoff) << PAGE_SHIFT); + + entry = &usergart[fmt].entry[usergart[fmt].last]; + + /* evict previous buffer using this usergart entry, if any: */ + if (entry->obj) + evict_entry(entry->obj, fmt, entry); + + entry->obj = obj; + entry->obj_pgoff = base_pgoff; + + /* now convert base_pgoff to phys offset from virt offset: */ + base_pgoff = (base_pgoff >> n_shift) * slots; + + /* for wider-than 4k.. figure out which part of the slot-row we want: */ + if (m > 1) { + int off = pgoff % m; + entry->obj_pgoff += off; + base_pgoff /= m; + slots = min(slots - (off << n_shift), n); + base_pgoff += off << n_shift; + vaddr += off << PAGE_SHIFT; + } + + /* + * Map in pages. Beyond the valid pixel part of the buffer, we set + * pages[i] to NULL to get a dummy page mapped in.. if someone + * reads/writes it they will get random/undefined content, but at + * least it won't be corrupting whatever other random page used to + * be mapped in, or other undefined behavior. + */ + memcpy(pages, &omap_obj->pages[base_pgoff], + sizeof(struct page *) * slots); + memset(pages + slots, 0, + sizeof(struct page *) * (n - slots)); + + ret = tiler_pin(entry->block, pages, ARRAY_SIZE(pages), 0, true); + if (ret) { + dev_err(obj->dev->dev, "failed to pin: %d\n", ret); + return ret; + } + + pfn = entry->paddr >> PAGE_SHIFT; + + VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address, + pfn, pfn << PAGE_SHIFT); + + for (i = n; i > 0; i--) { + vm_insert_mixed(vma, (unsigned long)vaddr, pfn); + pfn += usergart[fmt].stride_pfn; + vaddr += PAGE_SIZE * m; + } + + /* simple round-robin: */ + usergart[fmt].last = (usergart[fmt].last + 1) % NUM_USERGART_ENTRIES; + + return 0; +} + +/** + * omap_gem_fault - pagefault handler for GEM objects + * @vma: the VMA of the GEM object + * @vmf: fault detail + * + * Invoked when a fault occurs on an mmap of a GEM managed area. GEM + * does most of the work for us including the actual map/unmap calls + * but we need to do the actual page work. + * + * The VMA was set up by GEM. In doing so it also ensured that the + * vma->vm_private_data points to the GEM object that is backing this + * mapping. + */ +int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + struct drm_device *dev = obj->dev; + struct page **pages; + int ret; + + /* Make sure we don't parallel update on a fault, nor move or remove + * something from beneath our feet + */ + mutex_lock(&dev->struct_mutex); + + /* if a shmem backed object, make sure we have pages attached now */ + ret = get_pages(obj, &pages); + if (ret) + goto fail; + + /* where should we do corresponding put_pages().. we are mapping + * the original page, rather than thru a GART, so we can't rely + * on eviction to trigger this. But munmap() or all mappings should + * probably trigger put_pages()? + */ + + if (omap_obj->flags & OMAP_BO_TILED) + ret = fault_2d(obj, vma, vmf); + else + ret = fault_1d(obj, vma, vmf); + + +fail: + mutex_unlock(&dev->struct_mutex); + switch (ret) { + case 0: + case -ERESTARTSYS: + case -EINTR: + return VM_FAULT_NOPAGE; + case -ENOMEM: + return VM_FAULT_OOM; + default: + return VM_FAULT_SIGBUS; + } +} + +/** We override mainly to fix up some of the vm mapping flags.. */ +int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma) +{ + int ret; + + ret = drm_gem_mmap(filp, vma); + if (ret) { + DBG("mmap failed: %d", ret); + return ret; + } + + return omap_gem_mmap_obj(vma->vm_private_data, vma); +} + +int omap_gem_mmap_obj(struct drm_gem_object *obj, + struct vm_area_struct *vma) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + vma->vm_flags &= ~VM_PFNMAP; + vma->vm_flags |= VM_MIXEDMAP; + + if (omap_obj->flags & OMAP_BO_WC) { + vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); + } else if (omap_obj->flags & OMAP_BO_UNCACHED) { + vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags)); + } else { + /* + * We do have some private objects, at least for scanout buffers + * on hardware without DMM/TILER. But these are allocated write- + * combine + */ + if (WARN_ON(!obj->filp)) + return -EINVAL; + + /* + * Shunt off cached objs to shmem file so they have their own + * address_space (so unmap_mapping_range does what we want, + * in particular in the case of mmap'd dmabufs) + */ + fput(vma->vm_file); + vma->vm_pgoff = 0; + vma->vm_file = get_file(obj->filp); + + vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); + } + + return 0; +} + + +/** + * omap_gem_dumb_create - create a dumb buffer + * @drm_file: our client file + * @dev: our device + * @args: the requested arguments copied from userspace + * + * Allocate a buffer suitable for use for a frame buffer of the + * form described by user space. Give userspace a handle by which + * to reference it. + */ +int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + union omap_gem_size gsize; + + /* in case someone tries to feed us a completely bogus stride: */ + args->pitch = align_pitch(args->pitch, args->width, args->bpp); + args->size = PAGE_ALIGN(args->pitch * args->height); + + gsize = (union omap_gem_size){ + .bytes = args->size, + }; + + return omap_gem_new_handle(dev, file, gsize, + OMAP_BO_SCANOUT | OMAP_BO_WC, &args->handle); +} + +/** + * omap_gem_dumb_destroy - destroy a dumb buffer + * @file: client file + * @dev: our DRM device + * @handle: the object handle + * + * Destroy a handle that was created via omap_gem_dumb_create. + */ +int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev, + uint32_t handle) +{ + /* No special work needed, drop the reference and see what falls out */ + return drm_gem_handle_delete(file, handle); +} + +/** + * omap_gem_dumb_map - buffer mapping for dumb interface + * @file: our drm client file + * @dev: drm device + * @handle: GEM handle to the object (from dumb_create) + * + * Do the necessary setup to allow the mapping of the frame buffer + * into user memory. We don't have to do much here at the moment. + */ +int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev, + uint32_t handle, uint64_t *offset) +{ + struct drm_gem_object *obj; + int ret = 0; + + /* GEM does all our handle to object mapping */ + obj = drm_gem_object_lookup(dev, file, handle); + if (obj == NULL) { + ret = -ENOENT; + goto fail; + } + + *offset = omap_gem_mmap_offset(obj); + + drm_gem_object_unreference_unlocked(obj); + +fail: + return ret; +} + +/* Set scrolling position. This allows us to implement fast scrolling + * for console. + * + * Call only from non-atomic contexts. + */ +int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + uint32_t npages = obj->size >> PAGE_SHIFT; + int ret = 0; + + if (roll > npages) { + dev_err(obj->dev->dev, "invalid roll: %d\n", roll); + return -EINVAL; + } + + omap_obj->roll = roll; + + mutex_lock(&obj->dev->struct_mutex); + + /* if we aren't mapped yet, we don't need to do anything */ + if (omap_obj->block) { + struct page **pages; + ret = get_pages(obj, &pages); + if (ret) + goto fail; + ret = tiler_pin(omap_obj->block, pages, npages, roll, true); + if (ret) + dev_err(obj->dev->dev, "could not repin: %d\n", ret); + } + +fail: + mutex_unlock(&obj->dev->struct_mutex); + + return ret; +} + +/* Sync the buffer for CPU access.. note pages should already be + * attached, ie. omap_gem_get_pages() + */ +void omap_gem_cpu_sync(struct drm_gem_object *obj, int pgoff) +{ + struct drm_device *dev = obj->dev; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + if (is_cached_coherent(obj) && omap_obj->addrs[pgoff]) { + dma_unmap_page(dev->dev, omap_obj->addrs[pgoff], + PAGE_SIZE, DMA_BIDIRECTIONAL); + omap_obj->addrs[pgoff] = 0; + } +} + +/* sync the buffer for DMA access */ +void omap_gem_dma_sync(struct drm_gem_object *obj, + enum dma_data_direction dir) +{ + struct drm_device *dev = obj->dev; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + if (is_cached_coherent(obj)) { + int i, npages = obj->size >> PAGE_SHIFT; + struct page **pages = omap_obj->pages; + bool dirty = false; + + for (i = 0; i < npages; i++) { + if (!omap_obj->addrs[i]) { + omap_obj->addrs[i] = dma_map_page(dev->dev, pages[i], 0, + PAGE_SIZE, DMA_BIDIRECTIONAL); + dirty = true; + } + } + + if (dirty) { + unmap_mapping_range(obj->filp->f_mapping, 0, + omap_gem_mmap_size(obj), 1); + } + } +} + +/* Get physical address for DMA.. if 'remap' is true, and the buffer is not + * already contiguous, remap it to pin in physically contiguous memory.. (ie. + * map in TILER) + */ +int omap_gem_get_paddr(struct drm_gem_object *obj, + dma_addr_t *paddr, bool remap) +{ + struct omap_drm_private *priv = obj->dev->dev_private; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + mutex_lock(&obj->dev->struct_mutex); + + if (remap && is_shmem(obj) && priv->has_dmm) { + if (omap_obj->paddr_cnt == 0) { + struct page **pages; + uint32_t npages = obj->size >> PAGE_SHIFT; + enum tiler_fmt fmt = gem2fmt(omap_obj->flags); + struct tiler_block *block; + + BUG_ON(omap_obj->block); + + ret = get_pages(obj, &pages); + if (ret) + goto fail; + + if (omap_obj->flags & OMAP_BO_TILED) { + block = tiler_reserve_2d(fmt, + omap_obj->width, + omap_obj->height, 0); + } else { + block = tiler_reserve_1d(obj->size); + } + + if (IS_ERR(block)) { + ret = PTR_ERR(block); + dev_err(obj->dev->dev, + "could not remap: %d (%d)\n", ret, fmt); + goto fail; + } + + /* TODO: enable async refill.. */ + ret = tiler_pin(block, pages, npages, + omap_obj->roll, true); + if (ret) { + tiler_release(block); + dev_err(obj->dev->dev, + "could not pin: %d\n", ret); + goto fail; + } + + omap_obj->paddr = tiler_ssptr(block); + omap_obj->block = block; + + DBG("got paddr: %08x", omap_obj->paddr); + } + + omap_obj->paddr_cnt++; + + *paddr = omap_obj->paddr; + } else if (omap_obj->flags & OMAP_BO_DMA) { + *paddr = omap_obj->paddr; + } else { + ret = -EINVAL; + goto fail; + } + +fail: + mutex_unlock(&obj->dev->struct_mutex); + + return ret; +} + +/* Release physical address, when DMA is no longer being performed.. this + * could potentially unpin and unmap buffers from TILER + */ +int omap_gem_put_paddr(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + mutex_lock(&obj->dev->struct_mutex); + if (omap_obj->paddr_cnt > 0) { + omap_obj->paddr_cnt--; + if (omap_obj->paddr_cnt == 0) { + ret = tiler_unpin(omap_obj->block); + if (ret) { + dev_err(obj->dev->dev, + "could not unpin pages: %d\n", ret); + goto fail; + } + ret = tiler_release(omap_obj->block); + if (ret) { + dev_err(obj->dev->dev, + "could not release unmap: %d\n", ret); + } + omap_obj->block = NULL; + } + } +fail: + mutex_unlock(&obj->dev->struct_mutex); + return ret; +} + +/* Get rotated scanout address (only valid if already pinned), at the + * specified orientation and x,y offset from top-left corner of buffer + * (only valid for tiled 2d buffers) + */ +int omap_gem_rotated_paddr(struct drm_gem_object *obj, uint32_t orient, + int x, int y, dma_addr_t *paddr) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = -EINVAL; + + mutex_lock(&obj->dev->struct_mutex); + if ((omap_obj->paddr_cnt > 0) && omap_obj->block && + (omap_obj->flags & OMAP_BO_TILED)) { + *paddr = tiler_tsptr(omap_obj->block, orient, x, y); + ret = 0; + } + mutex_unlock(&obj->dev->struct_mutex); + return ret; +} + +/* Get tiler stride for the buffer (only valid for 2d tiled buffers) */ +int omap_gem_tiled_stride(struct drm_gem_object *obj, uint32_t orient) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = -EINVAL; + if (omap_obj->flags & OMAP_BO_TILED) + ret = tiler_stride(gem2fmt(omap_obj->flags), orient); + return ret; +} + +/* acquire pages when needed (for example, for DMA where physically + * contiguous buffer is not required + */ +static int get_pages(struct drm_gem_object *obj, struct page ***pages) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + if (is_shmem(obj) && !omap_obj->pages) { + ret = omap_gem_attach_pages(obj); + if (ret) { + dev_err(obj->dev->dev, "could not attach pages\n"); + return ret; + } + } + + /* TODO: even phys-contig.. we should have a list of pages? */ + *pages = omap_obj->pages; + + return 0; +} + +/* if !remap, and we don't have pages backing, then fail, rather than + * increasing the pin count (which we don't really do yet anyways, + * because we don't support swapping pages back out). And 'remap' + * might not be quite the right name, but I wanted to keep it working + * similarly to omap_gem_get_paddr(). Note though that mutex is not + * aquired if !remap (because this can be called in atomic ctxt), + * but probably omap_gem_get_paddr() should be changed to work in the + * same way. If !remap, a matching omap_gem_put_pages() call is not + * required (and should not be made). + */ +int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages, + bool remap) +{ + int ret; + if (!remap) { + struct omap_gem_object *omap_obj = to_omap_bo(obj); + if (!omap_obj->pages) + return -ENOMEM; + *pages = omap_obj->pages; + return 0; + } + mutex_lock(&obj->dev->struct_mutex); + ret = get_pages(obj, pages); + mutex_unlock(&obj->dev->struct_mutex); + return ret; +} + +/* release pages when DMA no longer being performed */ +int omap_gem_put_pages(struct drm_gem_object *obj) +{ + /* do something here if we dynamically attach/detach pages.. at + * least they would no longer need to be pinned if everyone has + * released the pages.. + */ + return 0; +} + +/* Get kernel virtual address for CPU access.. this more or less only + * exists for omap_fbdev. This should be called with struct_mutex + * held. + */ +void *omap_gem_vaddr(struct drm_gem_object *obj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + WARN_ON(!mutex_is_locked(&obj->dev->struct_mutex)); + if (!omap_obj->vaddr) { + struct page **pages; + int ret = get_pages(obj, &pages); + if (ret) + return ERR_PTR(ret); + omap_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT, + VM_MAP, pgprot_writecombine(PAGE_KERNEL)); + } + return omap_obj->vaddr; +} + +#ifdef CONFIG_PM +/* re-pin objects in DMM in resume path: */ +int omap_gem_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + struct omap_drm_private *priv = drm_dev->dev_private; + struct omap_gem_object *omap_obj; + int ret = 0; + + list_for_each_entry(omap_obj, &priv->obj_list, mm_list) { + if (omap_obj->block) { + struct drm_gem_object *obj = &omap_obj->base; + uint32_t npages = obj->size >> PAGE_SHIFT; + WARN_ON(!omap_obj->pages); /* this can't happen */ + ret = tiler_pin(omap_obj->block, + omap_obj->pages, npages, + omap_obj->roll, true); + if (ret) { + dev_err(dev, "could not repin: %d\n", ret); + return ret; + } + } + } + + return 0; +} +#endif + +#ifdef CONFIG_DEBUG_FS +void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m) +{ + struct drm_device *dev = obj->dev; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + uint64_t off = 0; + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + if (obj->map_list.map) + off = (uint64_t)obj->map_list.hash.key; + + seq_printf(m, "%08x: %2d (%2d) %08llx %08Zx (%2d) %p %4d", + omap_obj->flags, obj->name, obj->refcount.refcount.counter, + off, omap_obj->paddr, omap_obj->paddr_cnt, + omap_obj->vaddr, omap_obj->roll); + + if (omap_obj->flags & OMAP_BO_TILED) { + seq_printf(m, " %dx%d", omap_obj->width, omap_obj->height); + if (omap_obj->block) { + struct tcm_area *area = &omap_obj->block->area; + seq_printf(m, " (%dx%d, %dx%d)", + area->p0.x, area->p0.y, + area->p1.x, area->p1.y); + } + } else { + seq_printf(m, " %d", obj->size); + } + + seq_printf(m, "\n"); +} + +void omap_gem_describe_objects(struct list_head *list, struct seq_file *m) +{ + struct omap_gem_object *omap_obj; + int count = 0; + size_t size = 0; + + list_for_each_entry(omap_obj, list, mm_list) { + struct drm_gem_object *obj = &omap_obj->base; + seq_printf(m, " "); + omap_gem_describe(obj, m); + count++; + size += obj->size; + } + + seq_printf(m, "Total %d objects, %zu bytes\n", count, size); +} +#endif + +/* Buffer Synchronization: + */ + +struct omap_gem_sync_waiter { + struct list_head list; + struct omap_gem_object *omap_obj; + enum omap_gem_op op; + uint32_t read_target, write_target; + /* notify called w/ sync_lock held */ + void (*notify)(void *arg); + void *arg; +}; + +/* list of omap_gem_sync_waiter.. the notify fxn gets called back when + * the read and/or write target count is achieved which can call a user + * callback (ex. to kick 3d and/or 2d), wakeup blocked task (prep for + * cpu access), etc. + */ +static LIST_HEAD(waiters); + +static inline bool is_waiting(struct omap_gem_sync_waiter *waiter) +{ + struct omap_gem_object *omap_obj = waiter->omap_obj; + if ((waiter->op & OMAP_GEM_READ) && + (omap_obj->sync->read_complete < waiter->read_target)) + return true; + if ((waiter->op & OMAP_GEM_WRITE) && + (omap_obj->sync->write_complete < waiter->write_target)) + return true; + return false; +} + +/* macro for sync debug.. */ +#define SYNCDBG 0 +#define SYNC(fmt, ...) do { if (SYNCDBG) \ + printk(KERN_ERR "%s:%d: "fmt"\n", \ + __func__, __LINE__, ##__VA_ARGS__); \ + } while (0) + + +static void sync_op_update(void) +{ + struct omap_gem_sync_waiter *waiter, *n; + list_for_each_entry_safe(waiter, n, &waiters, list) { + if (!is_waiting(waiter)) { + list_del(&waiter->list); + SYNC("notify: %p", waiter); + waiter->notify(waiter->arg); + kfree(waiter); + } + } +} + +static inline int sync_op(struct drm_gem_object *obj, + enum omap_gem_op op, bool start) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + spin_lock(&sync_lock); + + if (!omap_obj->sync) { + omap_obj->sync = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC); + if (!omap_obj->sync) { + ret = -ENOMEM; + goto unlock; + } + } + + if (start) { + if (op & OMAP_GEM_READ) + omap_obj->sync->read_pending++; + if (op & OMAP_GEM_WRITE) + omap_obj->sync->write_pending++; + } else { + if (op & OMAP_GEM_READ) + omap_obj->sync->read_complete++; + if (op & OMAP_GEM_WRITE) + omap_obj->sync->write_complete++; + sync_op_update(); + } + +unlock: + spin_unlock(&sync_lock); + + return ret; +} + +/* it is a bit lame to handle updates in this sort of polling way, but + * in case of PVR, the GPU can directly update read/write complete + * values, and not really tell us which ones it updated.. this also + * means that sync_lock is not quite sufficient. So we'll need to + * do something a bit better when it comes time to add support for + * separate 2d hw.. + */ +void omap_gem_op_update(void) +{ + spin_lock(&sync_lock); + sync_op_update(); + spin_unlock(&sync_lock); +} + +/* mark the start of read and/or write operation */ +int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op) +{ + return sync_op(obj, op, true); +} + +int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op) +{ + return sync_op(obj, op, false); +} + +static DECLARE_WAIT_QUEUE_HEAD(sync_event); + +static void sync_notify(void *arg) +{ + struct task_struct **waiter_task = arg; + *waiter_task = NULL; + wake_up_all(&sync_event); +} + +int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + if (omap_obj->sync) { + struct task_struct *waiter_task = current; + struct omap_gem_sync_waiter *waiter = + kzalloc(sizeof(*waiter), GFP_KERNEL); + + if (!waiter) + return -ENOMEM; + + waiter->omap_obj = omap_obj; + waiter->op = op; + waiter->read_target = omap_obj->sync->read_pending; + waiter->write_target = omap_obj->sync->write_pending; + waiter->notify = sync_notify; + waiter->arg = &waiter_task; + + spin_lock(&sync_lock); + if (is_waiting(waiter)) { + SYNC("waited: %p", waiter); + list_add_tail(&waiter->list, &waiters); + spin_unlock(&sync_lock); + ret = wait_event_interruptible(sync_event, + (waiter_task == NULL)); + spin_lock(&sync_lock); + if (waiter_task) { + SYNC("interrupted: %p", waiter); + /* we were interrupted */ + list_del(&waiter->list); + waiter_task = NULL; + } else { + /* freed in sync_op_update() */ + waiter = NULL; + } + } + spin_unlock(&sync_lock); + + if (waiter) + kfree(waiter); + } + return ret; +} + +/* call fxn(arg), either synchronously or asynchronously if the op + * is currently blocked.. fxn() can be called from any context + * + * (TODO for now fxn is called back from whichever context calls + * omap_gem_op_update().. but this could be better defined later + * if needed) + * + * TODO more code in common w/ _sync().. + */ +int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op, + void (*fxn)(void *arg), void *arg) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + if (omap_obj->sync) { + struct omap_gem_sync_waiter *waiter = + kzalloc(sizeof(*waiter), GFP_ATOMIC); + + if (!waiter) + return -ENOMEM; + + waiter->omap_obj = omap_obj; + waiter->op = op; + waiter->read_target = omap_obj->sync->read_pending; + waiter->write_target = omap_obj->sync->write_pending; + waiter->notify = fxn; + waiter->arg = arg; + + spin_lock(&sync_lock); + if (is_waiting(waiter)) { + SYNC("waited: %p", waiter); + list_add_tail(&waiter->list, &waiters); + spin_unlock(&sync_lock); + return 0; + } + + spin_unlock(&sync_lock); + } + + /* no waiting.. */ + fxn(arg); + + return 0; +} + +/* special API so PVR can update the buffer to use a sync-object allocated + * from it's sync-obj heap. Only used for a newly allocated (from PVR's + * perspective) sync-object, so we overwrite the new syncobj w/ values + * from the already allocated syncobj (if there is one) + */ +int omap_gem_set_sync_object(struct drm_gem_object *obj, void *syncobj) +{ + struct omap_gem_object *omap_obj = to_omap_bo(obj); + int ret = 0; + + spin_lock(&sync_lock); + + if ((omap_obj->flags & OMAP_BO_EXT_SYNC) && !syncobj) { + /* clearing a previously set syncobj */ + syncobj = kmemdup(omap_obj->sync, sizeof(*omap_obj->sync), + GFP_ATOMIC); + if (!syncobj) { + ret = -ENOMEM; + goto unlock; + } + omap_obj->flags &= ~OMAP_BO_EXT_SYNC; + omap_obj->sync = syncobj; + } else if (syncobj && !(omap_obj->flags & OMAP_BO_EXT_SYNC)) { + /* replacing an existing syncobj */ + if (omap_obj->sync) { + memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync)); + kfree(omap_obj->sync); + } + omap_obj->flags |= OMAP_BO_EXT_SYNC; + omap_obj->sync = syncobj; + } + +unlock: + spin_unlock(&sync_lock); + return ret; +} + +int omap_gem_init_object(struct drm_gem_object *obj) +{ + return -EINVAL; /* unused */ +} + +/* don't call directly.. called from GEM core when it is time to actually + * free the object.. + */ +void omap_gem_free_object(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct omap_gem_object *omap_obj = to_omap_bo(obj); + + evict(obj); + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + list_del(&omap_obj->mm_list); + + if (obj->map_list.map) + drm_gem_free_mmap_offset(obj); + + /* this means the object is still pinned.. which really should + * not happen. I think.. + */ + WARN_ON(omap_obj->paddr_cnt > 0); + + /* don't free externally allocated backing memory */ + if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) { + if (omap_obj->pages) + omap_gem_detach_pages(obj); + + if (!is_shmem(obj)) { + dma_free_writecombine(dev->dev, obj->size, + omap_obj->vaddr, omap_obj->paddr); + } else if (omap_obj->vaddr) { + vunmap(omap_obj->vaddr); + } + } + + /* don't free externally allocated syncobj */ + if (!(omap_obj->flags & OMAP_BO_EXT_SYNC)) + kfree(omap_obj->sync); + + drm_gem_object_release(obj); + + kfree(obj); +} + +/* convenience method to construct a GEM buffer object, and userspace handle */ +int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file, + union omap_gem_size gsize, uint32_t flags, uint32_t *handle) +{ + struct drm_gem_object *obj; + int ret; + + obj = omap_gem_new(dev, gsize, flags); + if (!obj) + return -ENOMEM; + + ret = drm_gem_handle_create(file, obj, handle); + if (ret) { + drm_gem_object_release(obj); + kfree(obj); /* TODO isn't there a dtor to call? just copying i915 */ + return ret; + } + + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(obj); + + return 0; +} + +/* GEM buffer object constructor */ +struct drm_gem_object *omap_gem_new(struct drm_device *dev, + union omap_gem_size gsize, uint32_t flags) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_gem_object *omap_obj; + struct drm_gem_object *obj = NULL; + size_t size; + int ret; + + if (flags & OMAP_BO_TILED) { + if (!usergart) { + dev_err(dev->dev, "Tiled buffers require DMM\n"); + goto fail; + } + + /* tiled buffers are always shmem paged backed.. when they are + * scanned out, they are remapped into DMM/TILER + */ + flags &= ~OMAP_BO_SCANOUT; + + /* currently don't allow cached buffers.. there is some caching + * stuff that needs to be handled better + */ + flags &= ~(OMAP_BO_CACHED|OMAP_BO_UNCACHED); + flags |= OMAP_BO_WC; + + /* align dimensions to slot boundaries... */ + tiler_align(gem2fmt(flags), + &gsize.tiled.width, &gsize.tiled.height); + + /* ...and calculate size based on aligned dimensions */ + size = tiler_size(gem2fmt(flags), + gsize.tiled.width, gsize.tiled.height); + } else { + size = PAGE_ALIGN(gsize.bytes); + } + + omap_obj = kzalloc(sizeof(*omap_obj), GFP_KERNEL); + if (!omap_obj) + goto fail; + + list_add(&omap_obj->mm_list, &priv->obj_list); + + obj = &omap_obj->base; + + if ((flags & OMAP_BO_SCANOUT) && !priv->has_dmm) { + /* attempt to allocate contiguous memory if we don't + * have DMM for remappign discontiguous buffers + */ + omap_obj->vaddr = dma_alloc_writecombine(dev->dev, size, + &omap_obj->paddr, GFP_KERNEL); + if (omap_obj->vaddr) + flags |= OMAP_BO_DMA; + + } + + omap_obj->flags = flags; + + if (flags & OMAP_BO_TILED) { + omap_obj->width = gsize.tiled.width; + omap_obj->height = gsize.tiled.height; + } + + if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM)) + ret = drm_gem_private_object_init(dev, obj, size); + else + ret = drm_gem_object_init(dev, obj, size); + + if (ret) + goto fail; + + return obj; + +fail: + if (obj) + omap_gem_free_object(obj); + + return NULL; +} + +/* init/cleanup.. if DMM is used, we need to set some stuff up.. */ +void omap_gem_init(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + const enum tiler_fmt fmts[] = { + TILFMT_8BIT, TILFMT_16BIT, TILFMT_32BIT + }; + int i, j; + + if (!dmm_is_available()) { + /* DMM only supported on OMAP4 and later, so this isn't fatal */ + dev_warn(dev->dev, "DMM not available, disable DMM support\n"); + return; + } + + usergart = kcalloc(3, sizeof(*usergart), GFP_KERNEL); + if (!usergart) + return; + + /* reserve 4k aligned/wide regions for userspace mappings: */ + for (i = 0; i < ARRAY_SIZE(fmts); i++) { + uint16_t h = 1, w = PAGE_SIZE >> i; + tiler_align(fmts[i], &w, &h); + /* note: since each region is 1 4kb page wide, and minimum + * number of rows, the height ends up being the same as the + * # of pages in the region + */ + usergart[i].height = h; + usergart[i].height_shift = ilog2(h); + usergart[i].stride_pfn = tiler_stride(fmts[i], 0) >> PAGE_SHIFT; + usergart[i].slot_shift = ilog2((PAGE_SIZE / h) >> i); + for (j = 0; j < NUM_USERGART_ENTRIES; j++) { + struct usergart_entry *entry = &usergart[i].entry[j]; + struct tiler_block *block = + tiler_reserve_2d(fmts[i], w, h, + PAGE_SIZE); + if (IS_ERR(block)) { + dev_err(dev->dev, + "reserve failed: %d, %d, %ld\n", + i, j, PTR_ERR(block)); + return; + } + entry->paddr = tiler_ssptr(block); + entry->block = block; + + DBG("%d:%d: %dx%d: paddr=%08x stride=%d", i, j, w, h, + entry->paddr, + usergart[i].stride_pfn << PAGE_SHIFT); + } + } + + priv->has_dmm = true; +} + +void omap_gem_deinit(struct drm_device *dev) +{ + /* I believe we can rely on there being no more outstanding GEM + * objects which could depend on usergart/dmm at this point. + */ + kfree(usergart); +} |