aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/nouveau/nouveau_pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/nouveau/nouveau_pm.c')
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_pm.c382
1 files changed, 324 insertions, 58 deletions
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index a539fd25792..9064d7f1979 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -26,6 +26,7 @@
#include "nouveau_drv.h"
#include "nouveau_pm.h"
+#include "nouveau_gpio.h"
#ifdef CONFIG_ACPI
#include <linux/acpi.h>
@@ -35,22 +36,95 @@
#include <linux/hwmon-sysfs.h>
static int
-nouveau_pm_clock_set(struct drm_device *dev, struct nouveau_pm_level *perflvl,
- u8 id, u32 khz)
+nouveau_pwmfan_get(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
- void *pre_state;
+ struct gpio_func gpio;
+ u32 divs, duty;
+ int ret;
- if (khz == 0)
- return 0;
+ if (!pm->pwm_get)
+ return -ENODEV;
+
+ ret = nouveau_gpio_find(dev, 0, DCB_GPIO_PWM_FAN, 0xff, &gpio);
+ if (ret == 0) {
+ ret = pm->pwm_get(dev, gpio.line, &divs, &duty);
+ if (ret == 0) {
+ divs = max(divs, duty);
+ if (dev_priv->card_type <= NV_40 || (gpio.log[0] & 1))
+ duty = divs - duty;
+ return (duty * 100) / divs;
+ }
+
+ return nouveau_gpio_func_get(dev, gpio.func) * 100;
+ }
+
+ return -ENODEV;
+}
+
+static int
+nouveau_pwmfan_set(struct drm_device *dev, int percent)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+ struct gpio_func gpio;
+ u32 divs, duty;
+ int ret;
+
+ if (!pm->pwm_set)
+ return -ENODEV;
+
+ ret = nouveau_gpio_find(dev, 0, DCB_GPIO_PWM_FAN, 0xff, &gpio);
+ if (ret == 0) {
+ divs = pm->pwm_divisor;
+ if (pm->fan.pwm_freq) {
+ /*XXX: PNVIO clock more than likely... */
+ divs = 135000 / pm->fan.pwm_freq;
+ if (dev_priv->chipset < 0xa3)
+ divs /= 4;
+ }
+
+ duty = ((divs * percent) + 99) / 100;
+ if (dev_priv->card_type <= NV_40 || (gpio.log[0] & 1))
+ duty = divs - duty;
- pre_state = pm->clock_pre(dev, perflvl, id, khz);
- if (IS_ERR(pre_state))
- return PTR_ERR(pre_state);
+ return pm->pwm_set(dev, gpio.line, divs, duty);
+ }
+
+ return -ENODEV;
+}
+
+static int
+nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl,
+ struct nouveau_pm_level *a, struct nouveau_pm_level *b)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+ int ret;
+
+ /*XXX: not on all boards, we should control based on temperature
+ * on recent boards.. or maybe on some other factor we don't
+ * know about?
+ */
+ if (a->fanspeed && b->fanspeed && b->fanspeed > a->fanspeed) {
+ ret = nouveau_pwmfan_set(dev, perflvl->fanspeed);
+ if (ret && ret != -ENODEV) {
+ NV_ERROR(dev, "fanspeed set failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ if (pm->voltage.supported && pm->voltage_set) {
+ if (perflvl->volt_min && b->volt_min > a->volt_min) {
+ ret = pm->voltage_set(dev, perflvl->volt_min);
+ if (ret) {
+ NV_ERROR(dev, "voltage set failed: %d\n", ret);
+ return ret;
+ }
+ }
+ }
- if (pre_state)
- pm->clock_set(dev, pre_state);
return 0;
}
@@ -59,31 +133,24 @@ nouveau_pm_perflvl_set(struct drm_device *dev, struct nouveau_pm_level *perflvl)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+ void *state;
int ret;
if (perflvl == pm->cur)
return 0;
- if (pm->voltage.supported && pm->voltage_set && perflvl->volt_min) {
- ret = pm->voltage_set(dev, perflvl->volt_min);
- if (ret) {
- NV_ERROR(dev, "voltage_set %d failed: %d\n",
- perflvl->volt_min, ret);
- }
- }
+ ret = nouveau_pm_perflvl_aux(dev, perflvl, pm->cur, perflvl);
+ if (ret)
+ return ret;
- if (pm->clocks_pre) {
- void *state = pm->clocks_pre(dev, perflvl);
- if (IS_ERR(state))
- return PTR_ERR(state);
- pm->clocks_set(dev, state);
- } else
- if (pm->clock_set) {
- nouveau_pm_clock_set(dev, perflvl, PLL_CORE, perflvl->core);
- nouveau_pm_clock_set(dev, perflvl, PLL_SHADER, perflvl->shader);
- nouveau_pm_clock_set(dev, perflvl, PLL_MEMORY, perflvl->memory);
- nouveau_pm_clock_set(dev, perflvl, PLL_UNK05, perflvl->unk05);
- }
+ state = pm->clocks_pre(dev, perflvl);
+ if (IS_ERR(state))
+ return PTR_ERR(state);
+ pm->clocks_set(dev, state);
+
+ ret = nouveau_pm_perflvl_aux(dev, perflvl, perflvl, pm->cur);
+ if (ret)
+ return ret;
pm->cur = perflvl;
return 0;
@@ -130,28 +197,9 @@ nouveau_pm_perflvl_get(struct drm_device *dev, struct nouveau_pm_level *perflvl)
memset(perflvl, 0, sizeof(*perflvl));
- if (pm->clocks_get) {
- ret = pm->clocks_get(dev, perflvl);
- if (ret)
- return ret;
- } else
- if (pm->clock_get) {
- ret = pm->clock_get(dev, PLL_CORE);
- if (ret > 0)
- perflvl->core = ret;
-
- ret = pm->clock_get(dev, PLL_MEMORY);
- if (ret > 0)
- perflvl->memory = ret;
-
- ret = pm->clock_get(dev, PLL_SHADER);
- if (ret > 0)
- perflvl->shader = ret;
-
- ret = pm->clock_get(dev, PLL_UNK05);
- if (ret > 0)
- perflvl->unk05 = ret;
- }
+ ret = pm->clocks_get(dev, perflvl);
+ if (ret)
+ return ret;
if (pm->voltage.supported && pm->voltage_get) {
ret = pm->voltage_get(dev);
@@ -161,6 +209,10 @@ nouveau_pm_perflvl_get(struct drm_device *dev, struct nouveau_pm_level *perflvl)
}
}
+ ret = nouveau_pwmfan_get(dev);
+ if (ret > 0)
+ perflvl->fanspeed = ret;
+
return 0;
}
@@ -412,6 +464,172 @@ static SENSOR_DEVICE_ATTR(update_rate, S_IRUGO,
nouveau_hwmon_show_update_rate,
NULL, 0);
+static ssize_t
+nouveau_hwmon_show_fan0_input(struct device *d, struct device_attribute *attr,
+ char *buf)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+ struct gpio_func gpio;
+ u32 cycles, cur, prev;
+ u64 start;
+ int ret;
+
+ ret = nouveau_gpio_find(dev, 0, DCB_GPIO_FAN_SENSE, 0xff, &gpio);
+ if (ret)
+ return ret;
+
+ /* Monitor the GPIO input 0x3b for 250ms.
+ * When the fan spins, it changes the value of GPIO FAN_SENSE.
+ * We get 4 changes (0 -> 1 -> 0 -> 1 -> [...]) per complete rotation.
+ */
+ start = ptimer->read(dev);
+ prev = nouveau_gpio_sense(dev, 0, gpio.line);
+ cycles = 0;
+ do {
+ cur = nouveau_gpio_sense(dev, 0, gpio.line);
+ if (prev != cur) {
+ cycles++;
+ prev = cur;
+ }
+
+ usleep_range(500, 1000); /* supports 0 < rpm < 7500 */
+ } while (ptimer->read(dev) - start < 250000000);
+
+ /* interpolate to get rpm */
+ return sprintf(buf, "%i\n", cycles / 4 * 4 * 60);
+}
+static SENSOR_DEVICE_ATTR(fan0_input, S_IRUGO, nouveau_hwmon_show_fan0_input,
+ NULL, 0);
+
+static ssize_t
+nouveau_hwmon_get_pwm0(struct device *d, struct device_attribute *a, char *buf)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ int ret;
+
+ ret = nouveau_pwmfan_get(dev);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%i\n", ret);
+}
+
+static ssize_t
+nouveau_hwmon_set_pwm0(struct device *d, struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+ int ret = -ENODEV;
+ long value;
+
+ if (nouveau_perflvl_wr != 7777)
+ return -EPERM;
+
+ if (strict_strtol(buf, 10, &value) == -EINVAL)
+ return -EINVAL;
+
+ if (value < pm->fan.min_duty)
+ value = pm->fan.min_duty;
+ if (value > pm->fan.max_duty)
+ value = pm->fan.max_duty;
+
+ ret = nouveau_pwmfan_set(dev, value);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm0, S_IRUGO | S_IWUSR,
+ nouveau_hwmon_get_pwm0,
+ nouveau_hwmon_set_pwm0, 0);
+
+static ssize_t
+nouveau_hwmon_get_pwm0_min(struct device *d,
+ struct device_attribute *a, char *buf)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+
+ return sprintf(buf, "%i\n", pm->fan.min_duty);
+}
+
+static ssize_t
+nouveau_hwmon_set_pwm0_min(struct device *d, struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+ long value;
+
+ if (strict_strtol(buf, 10, &value) == -EINVAL)
+ return -EINVAL;
+
+ if (value < 0)
+ value = 0;
+
+ if (pm->fan.max_duty - value < 10)
+ value = pm->fan.max_duty - 10;
+
+ if (value < 10)
+ pm->fan.min_duty = 10;
+ else
+ pm->fan.min_duty = value;
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm0_min, S_IRUGO | S_IWUSR,
+ nouveau_hwmon_get_pwm0_min,
+ nouveau_hwmon_set_pwm0_min, 0);
+
+static ssize_t
+nouveau_hwmon_get_pwm0_max(struct device *d,
+ struct device_attribute *a, char *buf)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+
+ return sprintf(buf, "%i\n", pm->fan.max_duty);
+}
+
+static ssize_t
+nouveau_hwmon_set_pwm0_max(struct device *d, struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct drm_device *dev = dev_get_drvdata(d);
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+ long value;
+
+ if (strict_strtol(buf, 10, &value) == -EINVAL)
+ return -EINVAL;
+
+ if (value < 0)
+ value = 0;
+
+ if (value - pm->fan.min_duty < 10)
+ value = pm->fan.min_duty + 10;
+
+ if (value > 100)
+ pm->fan.max_duty = 100;
+ else
+ pm->fan.max_duty = value;
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(pwm0_max, S_IRUGO | S_IWUSR,
+ nouveau_hwmon_get_pwm0_max,
+ nouveau_hwmon_set_pwm0_max, 0);
+
static struct attribute *hwmon_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -420,20 +638,36 @@ static struct attribute *hwmon_attributes[] = {
&sensor_dev_attr_update_rate.dev_attr.attr,
NULL
};
+static struct attribute *hwmon_fan_rpm_attributes[] = {
+ &sensor_dev_attr_fan0_input.dev_attr.attr,
+ NULL
+};
+static struct attribute *hwmon_pwm_fan_attributes[] = {
+ &sensor_dev_attr_pwm0.dev_attr.attr,
+ &sensor_dev_attr_pwm0_min.dev_attr.attr,
+ &sensor_dev_attr_pwm0_max.dev_attr.attr,
+ NULL
+};
static const struct attribute_group hwmon_attrgroup = {
.attrs = hwmon_attributes,
};
+static const struct attribute_group hwmon_fan_rpm_attrgroup = {
+ .attrs = hwmon_fan_rpm_attributes,
+};
+static const struct attribute_group hwmon_pwm_fan_attrgroup = {
+ .attrs = hwmon_pwm_fan_attributes,
+};
#endif
static int
nouveau_hwmon_init(struct drm_device *dev)
{
-#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE))
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+#if defined(CONFIG_HWMON) || (defined(MODULE) && defined(CONFIG_HWMON_MODULE))
struct device *hwmon_dev;
- int ret;
+ int ret = 0;
if (!pm->temp_get)
return -ENODEV;
@@ -446,17 +680,46 @@ nouveau_hwmon_init(struct drm_device *dev)
return ret;
}
dev_set_drvdata(hwmon_dev, dev);
+
+ /* default sysfs entries */
ret = sysfs_create_group(&dev->pdev->dev.kobj, &hwmon_attrgroup);
if (ret) {
- NV_ERROR(dev,
- "Unable to create hwmon sysfs file: %d\n", ret);
- hwmon_device_unregister(hwmon_dev);
- return ret;
+ if (ret)
+ goto error;
+ }
+
+ /* if the card has a pwm fan */
+ /*XXX: incorrect, need better detection for this, some boards have
+ * the gpio entries for pwm fan control even when there's no
+ * actual fan connected to it... therm table? */
+ if (nouveau_pwmfan_get(dev) >= 0) {
+ ret = sysfs_create_group(&dev->pdev->dev.kobj,
+ &hwmon_pwm_fan_attrgroup);
+ if (ret)
+ goto error;
+ }
+
+ /* if the card can read the fan rpm */
+ if (nouveau_gpio_func_valid(dev, DCB_GPIO_FAN_SENSE)) {
+ ret = sysfs_create_group(&dev->pdev->dev.kobj,
+ &hwmon_fan_rpm_attrgroup);
+ if (ret)
+ goto error;
}
pm->hwmon = hwmon_dev;
-#endif
+
+ return 0;
+
+error:
+ NV_ERROR(dev, "Unable to create some hwmon sysfs files: %d\n", ret);
+ hwmon_device_unregister(hwmon_dev);
+ pm->hwmon = NULL;
+ return ret;
+#else
+ pm->hwmon = NULL;
return 0;
+#endif
}
static void
@@ -468,6 +731,9 @@ nouveau_hwmon_fini(struct drm_device *dev)
if (pm->hwmon) {
sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_attrgroup);
+ sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_pwm_fan_attrgroup);
+ sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_fan_rpm_attrgroup);
+
hwmon_device_unregister(pm->hwmon);
}
#endif