diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 88 |
1 files changed, 37 insertions, 51 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 6f728e5ee79..662a185274e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -328,29 +328,10 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t ch_ctl = intel_dp->output_reg + 0x10; + uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg; uint32_t status; bool done; - if (IS_HASWELL(dev)) { - switch (intel_dig_port->port) { - case PORT_A: - ch_ctl = DPA_AUX_CH_CTL; - break; - case PORT_B: - ch_ctl = PCH_DPB_AUX_CH_CTL; - break; - case PORT_C: - ch_ctl = PCH_DPC_AUX_CH_CTL; - break; - case PORT_D: - ch_ctl = PCH_DPD_AUX_CH_CTL; - break; - default: - BUG(); - } - } - #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, @@ -370,11 +351,10 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, uint8_t *send, int send_bytes, uint8_t *recv, int recv_size) { - uint32_t output_reg = intel_dp->output_reg; struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg; uint32_t ch_data = ch_ctl + 4; int i, ret, recv_bytes; uint32_t status; @@ -388,29 +368,6 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, */ pm_qos_update_request(&dev_priv->pm_qos, 0); - if (IS_HASWELL(dev)) { - switch (intel_dig_port->port) { - case PORT_A: - ch_ctl = DPA_AUX_CH_CTL; - ch_data = DPA_AUX_CH_DATA1; - break; - case PORT_B: - ch_ctl = PCH_DPB_AUX_CH_CTL; - ch_data = PCH_DPB_AUX_CH_DATA1; - break; - case PORT_C: - ch_ctl = PCH_DPC_AUX_CH_CTL; - ch_data = PCH_DPC_AUX_CH_DATA1; - break; - case PORT_D: - ch_ctl = PCH_DPD_AUX_CH_CTL; - ch_data = PCH_DPD_AUX_CH_DATA1; - break; - default: - BUG(); - } - } - intel_dp_check_edp(intel_dp); /* The clock divider is based off the hrawclk, * and would like to run at 2MHz. So, take the @@ -843,7 +800,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, intel_link_compute_m_n(intel_crtc->bpp, lane_count, mode->clock, adjusted_mode->clock, &m_n); - if (IS_HASWELL(dev)) { + if (HAS_DDI(dev)) { I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m); I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n); @@ -1010,7 +967,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } - if (is_cpu_edp(intel_dp)) + if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) ironlake_set_pll_edp(crtc, adjusted_mode->clock); } @@ -1374,7 +1331,7 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, if (!(tmp & DP_PORT_EN)) return false; - if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) { + if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { *pipe = PORT_TO_PIPE_CPT(tmp); } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { *pipe = PORT_TO_PIPE(tmp); @@ -1538,7 +1495,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) { struct drm_device *dev = intel_dp_to_dev(intel_dp); - if (IS_HASWELL(dev)) { + if (HAS_DDI(dev)) { switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { case DP_TRAIN_VOLTAGE_SWING_400: return DP_TRAIN_PRE_EMPHASIS_9_5; @@ -1746,7 +1703,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) uint32_t signal_levels, mask; uint8_t train_set = intel_dp->train_set[0]; - if (IS_HASWELL(dev)) { + if (HAS_DDI(dev)) { signal_levels = intel_hsw_signal_levels(train_set); mask = DDI_BUF_EMP_MASK; } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) { @@ -1777,7 +1734,7 @@ intel_dp_set_link_train(struct intel_dp *intel_dp, int ret; uint32_t temp; - if (IS_HASWELL(dev)) { + if (HAS_DDI(dev)) { temp = I915_READ(DP_TP_CTL(port)); if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) @@ -2301,6 +2258,16 @@ g4x_dp_detect(struct intel_dp *intel_dp) struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); uint32_t bit; + /* Can't disconnect eDP, but you can close the lid... */ + if (is_edp(intel_dp)) { + enum drm_connector_status status; + + status = intel_panel_detect(dev); + if (status == connector_status_unknown) + status = connector_status_connected; + return status; + } + switch (intel_dig_port->port) { case PORT_B: bit = PORTB_HOTPLUG_LIVE_STATUS; @@ -2831,6 +2798,25 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, else intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10; + if (HAS_DDI(dev)) { + switch (intel_dig_port->port) { + case PORT_A: + intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL; + break; + case PORT_B: + intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL; + break; + case PORT_C: + intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL; + break; + case PORT_D: + intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL; + break; + default: + BUG(); + } + } /* Set up the DDC bus. */ switch (port) { |