diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 227 |
1 files changed, 196 insertions, 31 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8f8d37d5663..a6ff15ac548 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -40,6 +40,8 @@ #define DP_LINK_CONFIGURATION_SIZE 9 +#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP) + struct intel_dp_priv { uint32_t output_reg; uint32_t DP; @@ -63,6 +65,19 @@ intel_dp_link_train(struct intel_output *intel_output, uint32_t DP, static void intel_dp_link_down(struct intel_output *intel_output, uint32_t DP); +void +intel_edp_link_config (struct intel_output *intel_output, + int *lane_num, int *link_bw) +{ + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + + *lane_num = dp_priv->lane_count; + if (dp_priv->link_bw == DP_LINK_BW_1_62) + *link_bw = 162000; + else if (dp_priv->link_bw == DP_LINK_BW_2_7) + *link_bw = 270000; +} + static int intel_dp_max_lane_count(struct intel_output *intel_output) { @@ -206,7 +221,13 @@ intel_dp_aux_ch(struct intel_output *intel_output, * and would like to run at 2MHz. So, take the * hrawclk value and divide by 2 and use that */ - aux_clock_divider = intel_hrawclk(dev) / 2; + if (IS_eDP(intel_output)) + aux_clock_divider = 225; /* eDP input clock at 450Mhz */ + else if (IS_IGDNG(dev)) + aux_clock_divider = 62; /* IGDNG: input clock fixed at 125Mhz */ + else + aux_clock_divider = intel_hrawclk(dev) / 2; + /* Must try at least 3 times according to DP spec */ for (try = 0; try < 5; try++) { /* Load the send data into the aux channel data registers */ @@ -236,7 +257,7 @@ intel_dp_aux_ch(struct intel_output *intel_output, } /* Clear done status and any errors */ - I915_WRITE(ch_ctl, (ctl | + I915_WRITE(ch_ctl, (status | DP_AUX_CH_CTL_DONE | DP_AUX_CH_CTL_TIME_OUT_ERROR | DP_AUX_CH_CTL_RECEIVE_ERROR)); @@ -246,7 +267,7 @@ intel_dp_aux_ch(struct intel_output *intel_output, } if ((status & DP_AUX_CH_CTL_DONE) == 0) { - printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); + DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); return -EBUSY; } @@ -254,11 +275,14 @@ intel_dp_aux_ch(struct intel_output *intel_output, * Timeouts occur when the sink is not connected */ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { - printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status); + DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); return -EIO; } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { - printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status); + DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status); return -ETIMEDOUT; } @@ -292,7 +316,7 @@ intel_dp_aux_native_write(struct intel_output *intel_output, return -1; msg[0] = AUX_NATIVE_WRITE << 4; msg[1] = address >> 8; - msg[2] = address; + msg[2] = address & 0xff; msg[3] = send_bytes - 1; memcpy(&msg[4], send, send_bytes); msg_bytes = send_bytes + 4; @@ -384,8 +408,8 @@ intel_dp_i2c_init(struct intel_output *intel_output, const char *name) memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter)); dp_priv->adapter.owner = THIS_MODULE; dp_priv->adapter.class = I2C_CLASS_DDC; - strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1); - dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0'; + strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1); + dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0'; dp_priv->adapter.algo_data = &dp_priv->algo; dp_priv->adapter.dev.parent = &intel_output->base.kdev; @@ -411,7 +435,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, dp_priv->link_bw = bws[clock]; dp_priv->lane_count = lane_count; adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); - printk(KERN_ERR "link bw %02x lane count %d clock %d\n", + DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n", dp_priv->link_bw, dp_priv->lane_count, adjusted_mode->clock); return true; @@ -490,22 +514,40 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, intel_dp_compute_m_n(3, lane_count, mode->clock, adjusted_mode->clock, &m_n); - if (intel_crtc->pipe == 0) { - I915_WRITE(PIPEA_GMCH_DATA_M, - ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | - m_n.gmch_m); - I915_WRITE(PIPEA_GMCH_DATA_N, - m_n.gmch_n); - I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); - I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); + if (IS_IGDNG(dev)) { + if (intel_crtc->pipe == 0) { + I915_WRITE(TRANSA_DATA_M1, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n); + I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m); + I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n); + } else { + I915_WRITE(TRANSB_DATA_M1, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n); + I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m); + I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n); + } } else { - I915_WRITE(PIPEB_GMCH_DATA_M, - ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | - m_n.gmch_m); - I915_WRITE(PIPEB_GMCH_DATA_N, - m_n.gmch_n); - I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); - I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); + if (intel_crtc->pipe == 0) { + I915_WRITE(PIPEA_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEA_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n); + } else { + I915_WRITE(PIPEB_GMCH_DATA_M, + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + I915_WRITE(PIPEB_GMCH_DATA_N, + m_n.gmch_n); + I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m); + I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n); + } } } @@ -553,8 +595,38 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, if (intel_crtc->pipe == 1) dp_priv->DP |= DP_PIPEB_SELECT; + + if (IS_eDP(intel_output)) { + /* don't miss out required setting for eDP */ + dp_priv->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + dp_priv->DP |= DP_PLL_FREQ_160MHZ; + else + dp_priv->DP |= DP_PLL_FREQ_270MHZ; + } } +static void igdng_edp_backlight_on (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp; + + DRM_DEBUG("\n"); + pp = I915_READ(PCH_PP_CONTROL); + pp |= EDP_BLC_ENABLE; + I915_WRITE(PCH_PP_CONTROL, pp); +} + +static void igdng_edp_backlight_off (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp; + + DRM_DEBUG("\n"); + pp = I915_READ(PCH_PP_CONTROL); + pp &= ~EDP_BLC_ENABLE; + I915_WRITE(PCH_PP_CONTROL, pp); +} static void intel_dp_dpms(struct drm_encoder *encoder, int mode) @@ -566,11 +638,17 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) uint32_t dp_reg = I915_READ(dp_priv->output_reg); if (mode != DRM_MODE_DPMS_ON) { - if (dp_reg & DP_PORT_EN) + if (dp_reg & DP_PORT_EN) { intel_dp_link_down(intel_output, dp_priv->DP); + if (IS_eDP(intel_output)) + igdng_edp_backlight_off(dev); + } } else { - if (!(dp_reg & DP_PORT_EN)) + if (!(dp_reg & DP_PORT_EN)) { intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); + if (IS_eDP(intel_output)) + igdng_edp_backlight_on(dev); + } } dp_priv->dpms_mode = mode; } @@ -932,6 +1010,23 @@ intel_dp_link_down(struct intel_output *intel_output, uint32_t DP) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp_priv *dp_priv = intel_output->dev_priv; + DRM_DEBUG("\n"); + + if (IS_eDP(intel_output)) { + DP &= ~DP_PLL_ENABLE; + I915_WRITE(dp_priv->output_reg, DP); + POSTING_READ(dp_priv->output_reg); + udelay(100); + } + + DP &= ~DP_LINK_TRAIN_MASK; + I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE); + POSTING_READ(dp_priv->output_reg); + + udelay(17000); + + if (IS_eDP(intel_output)) + DP |= DP_LINK_TRAIN_OFF; I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN); POSTING_READ(dp_priv->output_reg); } @@ -975,6 +1070,24 @@ intel_dp_check_link_status(struct intel_output *intel_output) intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration); } +static enum drm_connector_status +igdng_dp_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dp_priv *dp_priv = intel_output->dev_priv; + enum drm_connector_status status; + + status = connector_status_disconnected; + if (intel_dp_aux_native_read(intel_output, + 0x000, dp_priv->dpcd, + sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd)) + { + if (dp_priv->dpcd[0] != 0) + status = connector_status_connected; + } + return status; +} + /** * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. * @@ -993,6 +1106,9 @@ intel_dp_detect(struct drm_connector *connector) dp_priv->has_audio = false; + if (IS_IGDNG(dev)) + return igdng_dp_detect(connector); + temp = I915_READ(PORT_HOTPLUG_EN); I915_WRITE(PORT_HOTPLUG_EN, @@ -1036,11 +1152,27 @@ intel_dp_detect(struct drm_connector *connector) static int intel_dp_get_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int ret; /* We should parse the EDID data and find out if it has an audio sink */ - return intel_ddc_get_modes(intel_output); + ret = intel_ddc_get_modes(intel_output); + if (ret) + return ret; + + /* if eDP has no EDID, try to use fixed panel mode from VBT */ + if (IS_eDP(intel_output)) { + if (dev_priv->panel_fixed_mode != NULL) { + struct drm_display_mode *mode; + mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + } + return 0; } static void @@ -1103,6 +1235,7 @@ intel_dp_init(struct drm_device *dev, int output_reg) struct drm_connector *connector; struct intel_output *intel_output; struct intel_dp_priv *dp_priv; + const char *name = NULL; intel_output = kcalloc(sizeof(struct intel_output) + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); @@ -1116,7 +1249,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_MODE_CONNECTOR_DisplayPort); drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); - intel_output->type = INTEL_OUTPUT_DISPLAYPORT; + if (output_reg == DP_A) + intel_output->type = INTEL_OUTPUT_EDP; + else + intel_output->type = INTEL_OUTPUT_DISPLAYPORT; connector->interlace_allowed = true; connector->doublescan_allowed = 0; @@ -1136,12 +1272,41 @@ intel_dp_init(struct drm_device *dev, int output_reg) drm_sysfs_connector_add(connector); /* Set up the DDC bus. */ - intel_dp_i2c_init(intel_output, - (output_reg == DP_B) ? "DPDDC-B" : - (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D"); + switch (output_reg) { + case DP_A: + name = "DPDDC-A"; + break; + case DP_B: + case PCH_DP_B: + name = "DPDDC-B"; + break; + case DP_C: + case PCH_DP_C: + name = "DPDDC-C"; + break; + case DP_D: + case PCH_DP_D: + name = "DPDDC-D"; + break; + } + + intel_dp_i2c_init(intel_output, name); + intel_output->ddc_bus = &dp_priv->adapter; intel_output->hot_plug = intel_dp_hot_plug; + if (output_reg == DP_A) { + /* initialize panel mode from VBT if available for eDP */ + if (dev_priv->lfp_lvds_vbt_mode) { + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); + if (dev_priv->panel_fixed_mode) { + dev_priv->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + } + } + } + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written * 0xd. Failure to do so will result in spurious interrupts being * generated on the port when a cable is not attached. |