diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 2357 |
1 files changed, 1222 insertions, 1135 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 97922859459..990f065374b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -43,8 +43,8 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type); static void intel_update_watermarks(struct drm_device *dev); -static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule); -static void intel_crtc_update_cursor(struct drm_crtc *crtc); +static void intel_increase_pllclock(struct drm_crtc *crtc); +static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); typedef struct { /* given values */ @@ -342,6 +342,16 @@ static bool intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); +static inline u32 /* units of 100MHz */ +intel_fdi_link_freq(struct drm_device *dev) +{ + if (IS_GEN5(dev)) { + struct drm_i915_private *dev_priv = dev->dev_private; + return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2; + } else + return 27; +} + static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, @@ -701,16 +711,16 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) limit = intel_ironlake_limit(crtc); else if (IS_G4X(dev)) { limit = intel_g4x_limit(crtc); - } else if (IS_I9XX(dev) && !IS_PINEVIEW(dev)) { - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - limit = &intel_limits_i9xx_lvds; - else - limit = &intel_limits_i9xx_sdvo; } else if (IS_PINEVIEW(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_pineview_lvds; else limit = &intel_limits_pineview_sdvo; + } else if (!IS_GEN2(dev)) { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits_i9xx_lvds; + else + limit = &intel_limits_i9xx_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i8xx_lvds; @@ -744,20 +754,17 @@ static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock /** * Returns whether any output on the specified pipe is of the specified type */ -bool intel_pipe_has_type (struct drm_crtc *crtc, int type) +bool intel_pipe_has_type(struct drm_crtc *crtc, int type) { - struct drm_device *dev = crtc->dev; - struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_encoder *l_entry; + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) + if (encoder->base.crtc == crtc && encoder->type == type) + return true; - list_for_each_entry(l_entry, &mode_config->encoder_list, head) { - if (l_entry && l_entry->crtc == crtc) { - struct intel_encoder *intel_encoder = enc_to_intel_encoder(l_entry); - if (intel_encoder->type == type) - return true; - } - } - return false; + return false; } #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) @@ -928,10 +935,6 @@ intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; intel_clock_t clock; - /* return directly when it is eDP */ - if (HAS_eDP) - return true; - if (target < 200000) { clock.n = 1; clock.p1 = 2; @@ -955,26 +958,26 @@ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { - intel_clock_t clock; - if (target < 200000) { - clock.p1 = 2; - clock.p2 = 10; - clock.n = 2; - clock.m1 = 23; - clock.m2 = 8; - } else { - clock.p1 = 1; - clock.p2 = 10; - clock.n = 1; - clock.m1 = 14; - clock.m2 = 2; - } - clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); - clock.p = (clock.p1 * clock.p2); - clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; - clock.vco = 0; - memcpy(best_clock, &clock, sizeof(intel_clock_t)); - return true; + intel_clock_t clock; + if (target < 200000) { + clock.p1 = 2; + clock.p2 = 10; + clock.n = 2; + clock.m1 = 23; + clock.m2 = 8; + } else { + clock.p1 = 1; + clock.p2 = 10; + clock.n = 1; + clock.m1 = 14; + clock.m2 = 2; + } + clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); + clock.p = (clock.p1 * clock.p2); + clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + clock.vco = 0; + memcpy(best_clock, &clock, sizeof(intel_clock_t)); + return true; } /** @@ -1007,9 +1010,9 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS); /* Wait for vblank interrupt bit to set */ - if (wait_for((I915_READ(pipestat_reg) & - PIPE_VBLANK_INTERRUPT_STATUS), - 50, 0)) + if (wait_for(I915_READ(pipestat_reg) & + PIPE_VBLANK_INTERRUPT_STATUS, + 50)) DRM_DEBUG_KMS("vblank wait timed out\n"); } @@ -1028,36 +1031,35 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) * Otherwise: * wait for the display line value to settle (it usually * ends up stopping at the start of the next frame). - * + * */ -static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) +void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; if (INTEL_INFO(dev)->gen >= 4) { - int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF); + int reg = PIPECONF(pipe); /* Wait for the Pipe State to go off */ - if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, - 100, 0)) + if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, + 100)) DRM_DEBUG_KMS("pipe_off wait timed out\n"); } else { u32 last_line; - int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL); + int reg = PIPEDSL(pipe); unsigned long timeout = jiffies + msecs_to_jiffies(100); /* Wait for the display line to settle */ do { - last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK; + last_line = I915_READ(reg) & DSL_LINEMASK; mdelay(5); - } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) && + } while (((I915_READ(reg) & DSL_LINEMASK) != last_line) && time_after(timeout, jiffies)); if (time_after(jiffies, timeout)) DRM_DEBUG_KMS("pipe_off wait timed out\n"); } } -/* Parameters have changed, update FBC info */ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; @@ -1069,6 +1071,14 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) int plane, i; u32 fbc_ctl, fbc_ctl2; + if (fb->pitch == dev_priv->cfb_pitch && + obj_priv->fence_reg == dev_priv->cfb_fence && + intel_crtc->plane == dev_priv->cfb_plane && + I915_READ(FBC_CONTROL) & FBC_CTL_EN) + return; + + i8xx_disable_fbc(dev); + dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE; if (fb->pitch < dev_priv->cfb_pitch) @@ -1102,7 +1112,7 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) I915_WRITE(FBC_CONTROL, fbc_ctl); DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ", - dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); + dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); } void i8xx_disable_fbc(struct drm_device *dev) @@ -1110,19 +1120,16 @@ void i8xx_disable_fbc(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; u32 fbc_ctl; - if (!I915_HAS_FBC(dev)) - return; - - if (!(I915_READ(FBC_CONTROL) & FBC_CTL_EN)) - return; /* Already off, just return */ - /* Disable compression */ fbc_ctl = I915_READ(FBC_CONTROL); + if ((fbc_ctl & FBC_CTL_EN) == 0) + return; + fbc_ctl &= ~FBC_CTL_EN; I915_WRITE(FBC_CONTROL, fbc_ctl); /* Wait for compressing bit to clear */ - if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10, 0)) { + if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) { DRM_DEBUG_KMS("FBC idle timed out\n"); return; } @@ -1145,14 +1152,27 @@ static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : - DPFC_CTL_PLANEB); + int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB; unsigned long stall_watermark = 200; u32 dpfc_ctl; + dpfc_ctl = I915_READ(DPFC_CONTROL); + if (dpfc_ctl & DPFC_CTL_EN) { + if (dev_priv->cfb_pitch == dev_priv->cfb_pitch / 64 - 1 && + dev_priv->cfb_fence == obj_priv->fence_reg && + dev_priv->cfb_plane == intel_crtc->plane && + dev_priv->cfb_y == crtc->y) + return; + + I915_WRITE(DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN); + POSTING_READ(DPFC_CONTROL); + intel_wait_for_vblank(dev, intel_crtc->pipe); + } + dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj_priv->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; + dev_priv->cfb_y = crtc->y; dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X; if (obj_priv->tiling_mode != I915_TILING_NONE) { @@ -1162,7 +1182,6 @@ static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY); } - I915_WRITE(DPFC_CONTROL, dpfc_ctl); I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT)); @@ -1181,10 +1200,12 @@ void g4x_disable_fbc(struct drm_device *dev) /* Disable compression */ dpfc_ctl = I915_READ(DPFC_CONTROL); - dpfc_ctl &= ~DPFC_CTL_EN; - I915_WRITE(DPFC_CONTROL, dpfc_ctl); + if (dpfc_ctl & DPFC_CTL_EN) { + dpfc_ctl &= ~DPFC_CTL_EN; + I915_WRITE(DPFC_CONTROL, dpfc_ctl); - DRM_DEBUG_KMS("disabled FBC\n"); + DRM_DEBUG_KMS("disabled FBC\n"); + } } static bool g4x_fbc_enabled(struct drm_device *dev) @@ -1202,16 +1223,30 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int plane = (intel_crtc->plane == 0) ? DPFC_CTL_PLANEA : - DPFC_CTL_PLANEB; + int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB; unsigned long stall_watermark = 200; u32 dpfc_ctl; + dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); + if (dpfc_ctl & DPFC_CTL_EN) { + if (dev_priv->cfb_pitch == dev_priv->cfb_pitch / 64 - 1 && + dev_priv->cfb_fence == obj_priv->fence_reg && + dev_priv->cfb_plane == intel_crtc->plane && + dev_priv->cfb_offset == obj_priv->gtt_offset && + dev_priv->cfb_y == crtc->y) + return; + + I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN); + POSTING_READ(ILK_DPFC_CONTROL); + intel_wait_for_vblank(dev, intel_crtc->pipe); + } + dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj_priv->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; + dev_priv->cfb_offset = obj_priv->gtt_offset; + dev_priv->cfb_y = crtc->y; - dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); dpfc_ctl &= DPFC_RESERVED; dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X); if (obj_priv->tiling_mode != I915_TILING_NONE) { @@ -1221,15 +1256,13 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) I915_WRITE(ILK_DPFC_CHICKEN, ~DPFC_HT_MODIFY); } - I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT)); I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y); I915_WRITE(ILK_FBC_RT_BASE, obj_priv->gtt_offset | ILK_FBC_RT_VALID); /* enable it... */ - I915_WRITE(ILK_DPFC_CONTROL, I915_READ(ILK_DPFC_CONTROL) | - DPFC_CTL_EN); + I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); } @@ -1241,10 +1274,12 @@ void ironlake_disable_fbc(struct drm_device *dev) /* Disable compression */ dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); - dpfc_ctl &= ~DPFC_CTL_EN; - I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); + if (dpfc_ctl & DPFC_CTL_EN) { + dpfc_ctl &= ~DPFC_CTL_EN; + I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); - DRM_DEBUG_KMS("disabled FBC\n"); + DRM_DEBUG_KMS("disabled FBC\n"); + } } static bool ironlake_fbc_enabled(struct drm_device *dev) @@ -1286,8 +1321,7 @@ void intel_disable_fbc(struct drm_device *dev) /** * intel_update_fbc - enable/disable FBC as needed - * @crtc: CRTC to point the compressor at - * @mode: mode in use + * @dev: the drm_device * * Set up the framebuffer compression hardware at mode set time. We * enable it if possible: @@ -1304,18 +1338,14 @@ void intel_disable_fbc(struct drm_device *dev) * * We need to enable/disable FBC on a global basis. */ -static void intel_update_fbc(struct drm_crtc *crtc, - struct drm_display_mode *mode) +static void intel_update_fbc(struct drm_device *dev) { - struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_framebuffer *fb = crtc->fb; + struct drm_crtc *crtc = NULL, *tmp_crtc; + struct intel_crtc *intel_crtc; + struct drm_framebuffer *fb; struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj_priv; - struct drm_crtc *tmp_crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int plane = intel_crtc->plane; - int crtcs_enabled = 0; DRM_DEBUG_KMS("\n"); @@ -1325,12 +1355,6 @@ static void intel_update_fbc(struct drm_crtc *crtc, if (!I915_HAS_FBC(dev)) return; - if (!crtc->fb) - return; - - intel_fb = to_intel_framebuffer(fb); - obj_priv = to_intel_bo(intel_fb->obj); - /* * If FBC is already on, we just have to verify that we can * keep it that way... @@ -1341,35 +1365,47 @@ static void intel_update_fbc(struct drm_crtc *crtc, * - going to an unsupported config (interlace, pixel multiply, etc.) */ list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) { - if (tmp_crtc->enabled) - crtcs_enabled++; + if (tmp_crtc->enabled) { + if (crtc) { + DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); + dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES; + goto out_disable; + } + crtc = tmp_crtc; + } } - DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled); - if (crtcs_enabled > 1) { - DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); - dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES; + + if (!crtc || crtc->fb == NULL) { + DRM_DEBUG_KMS("no output, disabling\n"); + dev_priv->no_fbc_reason = FBC_NO_OUTPUT; goto out_disable; } + + intel_crtc = to_intel_crtc(crtc); + fb = crtc->fb; + intel_fb = to_intel_framebuffer(fb); + obj_priv = to_intel_bo(intel_fb->obj); + if (intel_fb->obj->size > dev_priv->cfb_size) { DRM_DEBUG_KMS("framebuffer too large, disabling " - "compression\n"); + "compression\n"); dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL; goto out_disable; } - if ((mode->flags & DRM_MODE_FLAG_INTERLACE) || - (mode->flags & DRM_MODE_FLAG_DBLSCAN)) { + if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) || + (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) { DRM_DEBUG_KMS("mode incompatible with compression, " - "disabling\n"); + "disabling\n"); dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE; goto out_disable; } - if ((mode->hdisplay > 2048) || - (mode->vdisplay > 1536)) { + if ((crtc->mode.hdisplay > 2048) || + (crtc->mode.vdisplay > 1536)) { DRM_DEBUG_KMS("mode too large for compression, disabling\n"); dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE; goto out_disable; } - if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) { + if ((IS_I915GM(dev) || IS_I945GM(dev)) && intel_crtc->plane != 0) { DRM_DEBUG_KMS("plane not 0, disabling compression\n"); dev_priv->no_fbc_reason = FBC_BAD_PLANE; goto out_disable; @@ -1384,18 +1420,7 @@ static void intel_update_fbc(struct drm_crtc *crtc, if (in_dbg_master()) goto out_disable; - if (intel_fbc_enabled(dev)) { - /* We can re-enable it in this case, but need to update pitch */ - if ((fb->pitch > dev_priv->cfb_pitch) || - (obj_priv->fence_reg != dev_priv->cfb_fence) || - (plane != dev_priv->cfb_plane)) - intel_disable_fbc(dev); - } - - /* Now try to turn it back on if possible */ - if (!intel_fbc_enabled(dev)) - intel_enable_fbc(crtc, 500); - + intel_enable_fbc(crtc, 500); return; out_disable: @@ -1407,7 +1432,9 @@ out_disable: } int -intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj) +intel_pin_and_fence_fb_obj(struct drm_device *dev, + struct drm_gem_object *obj, + bool pipelined) { struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); u32 alignment; @@ -1417,7 +1444,7 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj) case I915_TILING_NONE: if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) alignment = 128 * 1024; - else if (IS_I965G(dev)) + else if (INTEL_INFO(dev)->gen >= 4) alignment = 4 * 1024; else alignment = 64 * 1024; @@ -1435,9 +1462,13 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj) } ret = i915_gem_object_pin(obj, alignment); - if (ret != 0) + if (ret) return ret; + ret = i915_gem_object_set_to_display_plane(obj, pipelined); + if (ret) + goto err_unpin; + /* Install a fence for tiled scan-out. Pre-i965 always needs a * fence, whereas 965+ only requires a fence if using * framebuffer compression. For simplicity, we always install @@ -1445,20 +1476,22 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj) */ if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { - ret = i915_gem_object_get_fence_reg(obj); - if (ret != 0) { - i915_gem_object_unpin(obj); - return ret; - } + ret = i915_gem_object_get_fence_reg(obj, false); + if (ret) + goto err_unpin; } return 0; + +err_unpin: + i915_gem_object_unpin(obj); + return ret; } /* Assume fb object is pinned & idle & fenced and just update base pointers */ static int intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, - int x, int y) + int x, int y, enum mode_set_atomic state) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -1468,12 +1501,8 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_gem_object *obj; int plane = intel_crtc->plane; unsigned long Start, Offset; - int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR); - int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF); - int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE; - int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF); - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr; + u32 reg; switch (plane) { case 0: @@ -1488,7 +1517,8 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, obj = intel_fb->obj; obj_priv = to_intel_bo(obj); - dspcntr = I915_READ(dspcntr_reg); + reg = DSPCNTR(plane); + dspcntr = I915_READ(reg); /* Mask out pixel format bits in case we change it */ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (fb->bits_per_pixel) { @@ -1509,7 +1539,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, DRM_ERROR("Unknown color depth\n"); return -EINVAL; } - if (IS_I965G(dev)) { + if (INTEL_INFO(dev)->gen >= 4) { if (obj_priv->tiling_mode != I915_TILING_NONE) dspcntr |= DISPPLANE_TILED; else @@ -1520,28 +1550,24 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, /* must disable */ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; - I915_WRITE(dspcntr_reg, dspcntr); + I915_WRITE(reg, dspcntr); Start = obj_priv->gtt_offset; Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", Start, Offset, x, y, fb->pitch); - I915_WRITE(dspstride, fb->pitch); - if (IS_I965G(dev)) { - I915_WRITE(dspsurf, Start); - I915_WRITE(dsptileoff, (y << 16) | x); - I915_WRITE(dspbase, Offset); - } else { - I915_WRITE(dspbase, Start + Offset); - } - POSTING_READ(dspbase); - - if (IS_I965G(dev) || plane == 0) - intel_update_fbc(crtc, &crtc->mode); + I915_WRITE(DSPSTRIDE(plane), fb->pitch); + if (INTEL_INFO(dev)->gen >= 4) { + I915_WRITE(DSPSURF(plane), Start); + I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); + I915_WRITE(DSPADDR(plane), Offset); + } else + I915_WRITE(DSPADDR(plane), Start + Offset); + POSTING_READ(reg); - intel_wait_for_vblank(dev, intel_crtc->pipe); - intel_increase_pllclock(crtc, true); + intel_update_fbc(dev); + intel_increase_pllclock(crtc); return 0; } @@ -1553,11 +1579,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_device *dev = crtc->dev; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct intel_framebuffer *intel_fb; - struct drm_i915_gem_object *obj_priv; - struct drm_gem_object *obj; - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; int ret; /* no fb bound */ @@ -1566,45 +1587,42 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return 0; } - switch (plane) { + switch (intel_crtc->plane) { case 0: case 1: break; default: - DRM_ERROR("Can't update plane %d in SAREA\n", plane); return -EINVAL; } - intel_fb = to_intel_framebuffer(crtc->fb); - obj = intel_fb->obj; - obj_priv = to_intel_bo(obj); - mutex_lock(&dev->struct_mutex); - ret = intel_pin_and_fence_fb_obj(dev, obj); + ret = intel_pin_and_fence_fb_obj(dev, + to_intel_framebuffer(crtc->fb)->obj, + false); if (ret != 0) { mutex_unlock(&dev->struct_mutex); return ret; } - ret = i915_gem_object_set_to_display_plane(obj); - if (ret != 0) { - i915_gem_object_unpin(obj); - mutex_unlock(&dev->struct_mutex); - return ret; + if (old_fb) { + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_gem_object *obj = to_intel_framebuffer(old_fb)->obj; + struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); + + wait_event(dev_priv->pending_flip_queue, + atomic_read(&obj_priv->pending_flip) == 0); } - ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y); + ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, + LEAVE_ATOMIC_MODE_SET); if (ret) { - i915_gem_object_unpin(obj); + i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); mutex_unlock(&dev->struct_mutex); return ret; } - if (old_fb) { - intel_fb = to_intel_framebuffer(old_fb); - obj_priv = to_intel_bo(intel_fb->obj); - i915_gem_object_unpin(intel_fb->obj); - } + if (old_fb) + i915_gem_object_unpin(to_intel_framebuffer(old_fb)->obj); mutex_unlock(&dev->struct_mutex); @@ -1615,7 +1633,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, if (!master_priv->sarea_priv) return 0; - if (pipe) { + if (intel_crtc->pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; } else { @@ -1626,7 +1644,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return 0; } -static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock) +static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -1659,6 +1677,7 @@ static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock) } I915_WRITE(DP_A, dpa_ctl); + POSTING_READ(DP_A); udelay(500); } @@ -1669,84 +1688,109 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR; - int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR; - u32 temp, tries = 0; + u32 reg, temp, tries; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ - temp = I915_READ(fdi_rx_imr_reg); + reg = FDI_RX_IMR(pipe); + temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; - I915_WRITE(fdi_rx_imr_reg, temp); - I915_READ(fdi_rx_imr_reg); + I915_WRITE(reg, temp); + I915_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ - temp = I915_READ(fdi_tx_reg); - temp |= FDI_TX_ENABLE; + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(fdi_tx_reg, temp); - I915_READ(fdi_tx_reg); + I915_WRITE(reg, temp | FDI_TX_ENABLE); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE); - I915_READ(fdi_rx_reg); + I915_WRITE(reg, temp | FDI_RX_ENABLE); + + POSTING_READ(reg); udelay(150); + /* Ironlake workaround, enable clock pointer after FDI enable*/ + I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_ENABLE); + + reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { - temp = I915_READ(fdi_rx_iir_reg); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if ((temp & FDI_RX_BIT_LOCK)) { DRM_DEBUG_KMS("FDI train 1 done.\n"); - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_BIT_LOCK); + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); break; } } if (tries == 5) - DRM_DEBUG_KMS("FDI train 1 fail!\n"); + DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; - I915_WRITE(fdi_tx_reg, temp); + I915_WRITE(reg, temp); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; - I915_WRITE(fdi_rx_reg, temp); - udelay(150); + I915_WRITE(reg, temp); - tries = 0; + POSTING_READ(reg); + udelay(150); + reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { - temp = I915_READ(fdi_rx_iir_reg); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_SYMBOL_LOCK); + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (tries == 5) - DRM_DEBUG_KMS("FDI train 2 fail!\n"); + DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done\n"); + + /* enable normal train */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_NORMAL_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_NONE; + } + I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); + + /* wait one idle pattern time */ + POSTING_READ(reg); + udelay(1000); } -static int snb_b_fdi_train_param [] = { +static const int const snb_b_fdi_train_param [] = { FDI_LINK_TRAIN_400MV_0DB_SNB_B, FDI_LINK_TRAIN_400MV_6DB_SNB_B, FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, @@ -1760,24 +1804,22 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR; - int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR; - u32 temp, i; + u32 reg, temp, i; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ - temp = I915_READ(fdi_rx_imr_reg); + reg = FDI_RX_IMR(pipe); + temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; - I915_WRITE(fdi_rx_imr_reg, temp); - I915_READ(fdi_rx_imr_reg); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ - temp = I915_READ(fdi_tx_reg); - temp |= FDI_TX_ENABLE; + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; @@ -1785,10 +1827,10 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; - I915_WRITE(fdi_tx_reg, temp); - I915_READ(fdi_tx_reg); + I915_WRITE(reg, temp | FDI_TX_ENABLE); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; @@ -1796,32 +1838,37 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE); - I915_READ(fdi_rx_reg); + I915_WRITE(reg, temp | FDI_RX_ENABLE); + + POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; - I915_WRITE(fdi_tx_reg, temp); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(500); - temp = I915_READ(fdi_rx_iir_reg); + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK) { - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_BIT_LOCK); + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("FDI train 1 done.\n"); break; } } if (i == 4) - DRM_DEBUG_KMS("FDI train 1 fail!\n"); + DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; if (IS_GEN6(dev)) { @@ -1829,9 +1876,10 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; } - I915_WRITE(fdi_tx_reg, temp); + I915_WRITE(reg, temp); - temp = I915_READ(fdi_rx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; @@ -1839,535 +1887,593 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; } - I915_WRITE(fdi_rx_reg, temp); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { - temp = I915_READ(fdi_tx_reg); + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; - I915_WRITE(fdi_tx_reg, temp); + I915_WRITE(reg, temp); + + POSTING_READ(reg); udelay(500); - temp = I915_READ(fdi_rx_iir_reg); + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(fdi_rx_iir_reg, - temp | FDI_RX_SYMBOL_LOCK); + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (i == 4) - DRM_DEBUG_KMS("FDI train 2 fail!\n"); + DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done.\n"); } -static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) +static void ironlake_fdi_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF; - int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B; - int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B; - int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B; - int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B; - int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B; - int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; - int trans_dpll_sel = (pipe == 0) ? 0 : 1; - u32 temp; - u32 pipe_bpc; - - temp = I915_READ(pipeconf_reg); - pipe_bpc = temp & PIPE_BPC_MASK; + u32 reg, temp; - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); + /* Write the TU size bits so error detection works */ + I915_WRITE(FDI_RX_TUSIZE1(pipe), + I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK); - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - temp = I915_READ(PCH_LVDS); - if ((temp & LVDS_PORT_EN) == 0) { - I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); - POSTING_READ(PCH_LVDS); - } - } + /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~((0x7 << 19) | (0x7 << 16)); + temp |= (intel_crtc->fdi_lanes - 1) << 19; + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); - if (!HAS_eDP) { + POSTING_READ(reg); + udelay(200); - /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ - temp = I915_READ(fdi_rx_reg); - /* - * make the BPC in FDI Rx be consistent with that in - * pipeconf reg. - */ - temp &= ~(0x7 << 16); - temp |= (pipe_bpc << 11); - temp &= ~(7 << 19); - temp |= (intel_crtc->fdi_lanes - 1) << 19; - I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); - I915_READ(fdi_rx_reg); - udelay(200); + /* Switch from Rawclk to PCDclk */ + temp = I915_READ(reg); + I915_WRITE(reg, temp | FDI_PCDCLK); - /* Switch from Rawclk to PCDclk */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK); - I915_READ(fdi_rx_reg); - udelay(200); + POSTING_READ(reg); + udelay(200); - /* Enable CPU FDI TX PLL, always on for Ironlake */ - temp = I915_READ(fdi_tx_reg); - if ((temp & FDI_TX_PLL_ENABLE) == 0) { - I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); - udelay(100); - } - } + /* Enable CPU FDI TX PLL, always on for Ironlake */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + if ((temp & FDI_TX_PLL_ENABLE) == 0) { + I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); - /* Enable panel fitting for LVDS */ - if (dev_priv->pch_pf_size && - (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) - || HAS_eDP || intel_pch_has_edp(crtc))) { - /* Force use of hard-coded filter coefficients - * as some pre-programmed values are broken, - * e.g. x201. - */ - I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, - PF_ENABLE | PF_FILTER_MED_3x3); - I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS, - dev_priv->pch_pf_pos); - I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, - dev_priv->pch_pf_size); - } + POSTING_READ(reg); + udelay(100); + } +} - /* Enable CPU pipe */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) { - I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); - I915_READ(pipeconf_reg); - udelay(100); - } +static void intel_flush_display_plane(struct drm_device *dev, + int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg = DSPADDR(plane); + I915_WRITE(reg, I915_READ(reg)); +} - /* configure and enable CPU plane */ - temp = I915_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); - } +/* + * When we disable a pipe, we need to clear any pending scanline wait events + * to avoid hanging the ring, which we assume we are waiting on. + */ +static void intel_clear_scanline_wait(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 tmp; - if (!HAS_eDP) { - /* For PCH output, training FDI link */ - if (IS_GEN6(dev)) - gen6_fdi_link_train(crtc); - else - ironlake_fdi_link_train(crtc); + if (IS_GEN2(dev)) + /* Can't break the hang on i8xx */ + return; - /* enable PCH DPLL */ - temp = I915_READ(pch_dpll_reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(pch_dpll_reg); - } - udelay(200); + tmp = I915_READ(PRB0_CTL); + if (tmp & RING_WAIT) { + I915_WRITE(PRB0_CTL, tmp); + POSTING_READ(PRB0_CTL); + } +} - if (HAS_PCH_CPT(dev)) { - /* Be sure PCH DPLL SEL is set */ - temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0 && - (temp & TRANSA_DPLL_ENABLE) == 0) - temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); - else if (trans_dpll_sel == 1 && - (temp & TRANSB_DPLL_ENABLE) == 0) - temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); - I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); - } +static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) +{ + struct drm_i915_gem_object *obj_priv; + struct drm_i915_private *dev_priv; - /* set transcoder timing */ - I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg)); - I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg)); - I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg)); - - I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg)); - I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg)); - I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg)); - - /* enable normal train */ - temp = I915_READ(fdi_tx_reg); - temp &= ~FDI_LINK_TRAIN_NONE; - I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE | - FDI_TX_ENHANCE_FRAME_ENABLE); - I915_READ(fdi_tx_reg); - - temp = I915_READ(fdi_rx_reg); - if (HAS_PCH_CPT(dev)) { - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_NORMAL_CPT; - } else { - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_NONE; - } - I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); - I915_READ(fdi_rx_reg); + if (crtc->fb == NULL) + return; - /* wait one idle pattern time */ - udelay(100); + obj_priv = to_intel_bo(to_intel_framebuffer(crtc->fb)->obj); + dev_priv = crtc->dev->dev_private; + wait_event(dev_priv->pending_flip_queue, + atomic_read(&obj_priv->pending_flip) == 0); +} - /* For PCH DP, enable TRANS_DP_CTL */ - if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { - int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B; - int reg; - - reg = I915_READ(trans_dp_ctl); - reg &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); - reg |= (TRANS_DP_OUTPUT_ENABLE | - TRANS_DP_ENH_FRAMING); - - if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) - reg |= TRANS_DP_HSYNC_ACTIVE_HIGH; - if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) - reg |= TRANS_DP_VSYNC_ACTIVE_HIGH; - - switch (intel_trans_dp_port_sel(crtc)) { - case PCH_DP_B: - reg |= TRANS_DP_PORT_SEL_B; - break; - case PCH_DP_C: - reg |= TRANS_DP_PORT_SEL_C; - break; - case PCH_DP_D: - reg |= TRANS_DP_PORT_SEL_D; - break; - default: - DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); - reg |= TRANS_DP_PORT_SEL_B; - break; - } +static void ironlake_crtc_enable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + u32 reg, temp; - I915_WRITE(trans_dp_ctl, reg); - POSTING_READ(trans_dp_ctl); - } + if (intel_crtc->active) + return; - /* enable PCH transcoder */ - temp = I915_READ(transconf_reg); - /* - * make the BPC in transcoder be consistent with - * that in pipeconf reg. - */ - temp &= ~PIPE_BPC_MASK; - temp |= pipe_bpc; - I915_WRITE(transconf_reg, temp | TRANS_ENABLE); - I915_READ(transconf_reg); + intel_crtc->active = true; + intel_update_watermarks(dev); - if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 100, 1)) - DRM_ERROR("failed to enable transcoder\n"); - } + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + temp = I915_READ(PCH_LVDS); + if ((temp & LVDS_PORT_EN) == 0) + I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); + } - intel_crtc_load_lut(crtc); + ironlake_fdi_enable(crtc); - intel_update_fbc(crtc, &crtc->mode); - break; + /* Enable panel fitting for LVDS */ + if (dev_priv->pch_pf_size && + (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) { + /* Force use of hard-coded filter coefficients + * as some pre-programmed values are broken, + * e.g. x201. + */ + I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, + PF_ENABLE | PF_FILTER_MED_3x3); + I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS, + dev_priv->pch_pf_pos); + I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, + dev_priv->pch_pf_size); + } + + /* Enable CPU pipe */ + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if ((temp & PIPECONF_ENABLE) == 0) { + I915_WRITE(reg, temp | PIPECONF_ENABLE); + POSTING_READ(reg); + intel_wait_for_vblank(dev, intel_crtc->pipe); + } + + /* configure and enable CPU plane */ + reg = DSPCNTR(plane); + temp = I915_READ(reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + I915_WRITE(reg, temp | DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + } + + /* For PCH output, training FDI link */ + if (IS_GEN6(dev)) + gen6_fdi_link_train(crtc); + else + ironlake_fdi_link_train(crtc); + + /* enable PCH DPLL */ + reg = PCH_DPLL(pipe); + temp = I915_READ(reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(reg, temp | DPLL_VCO_ENABLE); + POSTING_READ(reg); + udelay(200); + } - case DRM_MODE_DPMS_OFF: - DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); + if (HAS_PCH_CPT(dev)) { + /* Be sure PCH DPLL SEL is set */ + temp = I915_READ(PCH_DPLL_SEL); + if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0) + temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); + else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0) + temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); + I915_WRITE(PCH_DPLL_SEL, temp); + } - drm_vblank_off(dev, pipe); - /* Disable display plane */ - temp = I915_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); - I915_READ(dspbase_reg); + /* set transcoder timing */ + I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); + I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); + I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); + + I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); + I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); + I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); + + /* For PCH DP, enable TRANS_DP_CTL */ + if (HAS_PCH_CPT(dev) && + intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + reg = TRANS_DP_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(TRANS_DP_PORT_SEL_MASK | + TRANS_DP_SYNC_MASK); + temp |= (TRANS_DP_OUTPUT_ENABLE | + TRANS_DP_ENH_FRAMING); + + if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) + temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; + if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) + temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; + + switch (intel_trans_dp_port_sel(crtc)) { + case PCH_DP_B: + temp |= TRANS_DP_PORT_SEL_B; + break; + case PCH_DP_C: + temp |= TRANS_DP_PORT_SEL_C; + break; + case PCH_DP_D: + temp |= TRANS_DP_PORT_SEL_D; + break; + default: + DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); + temp |= TRANS_DP_PORT_SEL_B; + break; } - if (dev_priv->cfb_plane == plane && - dev_priv->display.disable_fbc) - dev_priv->display.disable_fbc(dev); + I915_WRITE(reg, temp); + } - /* disable cpu pipe, disable after all planes disabled */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + /* enable PCH transcoder */ + reg = TRANSCONF(pipe); + temp = I915_READ(reg); + /* + * make the BPC in transcoder be consistent with + * that in pipeconf reg. + */ + temp &= ~PIPE_BPC_MASK; + temp |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; + I915_WRITE(reg, temp | TRANS_ENABLE); + if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) + DRM_ERROR("failed to enable transcoder %d\n", pipe); - /* wait for cpu pipe off, pipe state */ - if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50, 1)) - DRM_ERROR("failed to turn off cpu pipe\n"); - } else - DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); + intel_crtc_load_lut(crtc); + intel_update_fbc(dev); + intel_crtc_update_cursor(crtc, true); +} - udelay(100); +static void ironlake_crtc_disable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + u32 reg, temp; + + if (!intel_crtc->active) + return; - /* Disable PF */ - I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0); - I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0); + intel_crtc_wait_for_pending_flips(crtc); + drm_vblank_off(dev, pipe); + intel_crtc_update_cursor(crtc, false); - /* disable CPU FDI tx and PCH FDI rx */ - temp = I915_READ(fdi_tx_reg); - I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE); - I915_READ(fdi_tx_reg); + /* Disable display plane */ + reg = DSPCNTR(plane); + temp = I915_READ(reg); + if (temp & DISPLAY_PLANE_ENABLE) { + I915_WRITE(reg, temp & ~DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + } - temp = I915_READ(fdi_rx_reg); - /* BPC in FDI rx is consistent with that in pipeconf */ - temp &= ~(0x07 << 16); - temp |= (pipe_bpc << 11); - I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE); - I915_READ(fdi_rx_reg); + if (dev_priv->cfb_plane == plane && + dev_priv->display.disable_fbc) + dev_priv->display.disable_fbc(dev); - udelay(100); + /* disable cpu pipe, disable after all planes disabled */ + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if (temp & PIPECONF_ENABLE) { + I915_WRITE(reg, temp & ~PIPECONF_ENABLE); + POSTING_READ(reg); + /* wait for cpu pipe off, pipe state */ + intel_wait_for_pipe_off(dev, intel_crtc->pipe); + } + + /* Disable PF */ + I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0); + I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0); + + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); - /* still set train pattern 1 */ - temp = I915_READ(fdi_tx_reg); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(fdi_tx_reg, temp); - POSTING_READ(fdi_tx_reg); - - temp = I915_READ(fdi_rx_reg); - if (HAS_PCH_CPT(dev)) { - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; - } else { - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_PATTERN_1; - } - I915_WRITE(fdi_rx_reg, temp); - POSTING_READ(fdi_rx_reg); + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); - udelay(100); + POSTING_READ(reg); + udelay(100); - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - temp = I915_READ(PCH_LVDS); + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + temp = I915_READ(PCH_LVDS); + if (temp & LVDS_PORT_EN) { I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN); - I915_READ(PCH_LVDS); + POSTING_READ(PCH_LVDS); udelay(100); } + } - /* disable PCH transcoder */ - temp = I915_READ(transconf_reg); - if ((temp & TRANS_ENABLE) != 0) { - I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE); + /* disable PCH transcoder */ + reg = TRANSCONF(plane); + temp = I915_READ(reg); + if (temp & TRANS_ENABLE) { + I915_WRITE(reg, temp & ~TRANS_ENABLE); + /* wait for PCH transcoder off, transcoder state */ + if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) + DRM_ERROR("failed to disable transcoder\n"); + } - /* wait for PCH transcoder off, transcoder state */ - if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50, 1)) - DRM_ERROR("failed to disable transcoder\n"); - } + if (HAS_PCH_CPT(dev)) { + /* disable TRANS_DP_CTL */ + reg = TRANS_DP_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); + I915_WRITE(reg, temp); - temp = I915_READ(transconf_reg); - /* BPC in transcoder is consistent with that in pipeconf */ - temp &= ~PIPE_BPC_MASK; - temp |= pipe_bpc; - I915_WRITE(transconf_reg, temp); - I915_READ(transconf_reg); - udelay(100); + /* disable DPLL_SEL */ + temp = I915_READ(PCH_DPLL_SEL); + if (pipe == 0) + temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); + else + temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); + I915_WRITE(PCH_DPLL_SEL, temp); + } - if (HAS_PCH_CPT(dev)) { - /* disable TRANS_DP_CTL */ - int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B; - int reg; + /* disable PCH DPLL */ + reg = PCH_DPLL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~DPLL_VCO_ENABLE); - reg = I915_READ(trans_dp_ctl); - reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); - I915_WRITE(trans_dp_ctl, reg); - POSTING_READ(trans_dp_ctl); + /* Switch from PCDclk to Rawclk */ + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_PCDCLK); - /* disable DPLL_SEL */ - temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0) - temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); - else - temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); - I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); + /* Disable CPU FDI TX PLL */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); - } + POSTING_READ(reg); + udelay(100); - /* disable PCH DPLL */ - temp = I915_READ(pch_dpll_reg); - I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE); - I915_READ(pch_dpll_reg); - - /* Switch from PCDclk to Rawclk */ - temp = I915_READ(fdi_rx_reg); - temp &= ~FDI_SEL_PCDCLK; - I915_WRITE(fdi_rx_reg, temp); - I915_READ(fdi_rx_reg); - - /* Disable CPU FDI TX PLL */ - temp = I915_READ(fdi_tx_reg); - I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); - udelay(100); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); - temp = I915_READ(fdi_rx_reg); - temp &= ~FDI_RX_PLL_ENABLE; - I915_WRITE(fdi_rx_reg, temp); - I915_READ(fdi_rx_reg); + /* Wait for the clocks to turn off. */ + POSTING_READ(reg); + udelay(100); - /* Wait for the clocks to turn off. */ - udelay(100); + intel_crtc->active = false; + intel_update_watermarks(dev); + intel_update_fbc(dev); + intel_clear_scanline_wait(dev); +} + +static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); + ironlake_crtc_enable(crtc); + break; + + case DRM_MODE_DPMS_OFF: + DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); + ironlake_crtc_disable(crtc); break; } } static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) { - struct intel_overlay *overlay; - int ret; - if (!enable && intel_crtc->overlay) { - overlay = intel_crtc->overlay; - mutex_lock(&overlay->dev->struct_mutex); - for (;;) { - ret = intel_overlay_switch_off(overlay); - if (ret == 0) - break; + struct drm_device *dev = intel_crtc->base.dev; - ret = intel_overlay_recover_from_interrupt(overlay, 0); - if (ret != 0) { - /* overlay doesn't react anymore. Usually - * results in a black screen and an unkillable - * X server. */ - BUG(); - overlay->hw_wedged = HW_WEDGED; - break; - } - } - mutex_unlock(&overlay->dev->struct_mutex); + mutex_lock(&dev->struct_mutex); + (void) intel_overlay_switch_off(intel_crtc->overlay, false); + mutex_unlock(&dev->struct_mutex); } - /* Let userspace switch the overlay on again. In most cases userspace - * has to recompute where to put it anyway. */ - return; + /* Let userspace switch the overlay on again. In most cases userspace + * has to recompute where to put it anyway. + */ } -static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) +static void i9xx_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - u32 temp; + u32 reg, temp; - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = I915_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(dpll_reg, temp); - I915_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); - I915_READ(dpll_reg); - /* Wait for the clocks to stabilize. */ - udelay(150); - } + if (intel_crtc->active) + return; - /* Enable the pipe */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) == 0) - I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); - - /* Enable the plane */ - temp = I915_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); - } + intel_crtc->active = true; + intel_update_watermarks(dev); - intel_crtc_load_lut(crtc); + /* Enable the DPLL */ + reg = DPLL(pipe); + temp = I915_READ(reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(reg, temp); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(reg); + udelay(150); - if ((IS_I965G(dev) || plane == 0)) - intel_update_fbc(crtc, &crtc->mode); + I915_WRITE(reg, temp | DPLL_VCO_ENABLE); - /* Give the overlay scaler a chance to enable if it's on this pipe */ - intel_crtc_dpms_overlay(intel_crtc, true); - break; - case DRM_MODE_DPMS_OFF: - /* Give the overlay scaler a chance to disable if it's on this pipe */ - intel_crtc_dpms_overlay(intel_crtc, false); - drm_vblank_off(dev, pipe); - - if (dev_priv->cfb_plane == plane && - dev_priv->display.disable_fbc) - dev_priv->display.disable_fbc(dev); - - /* Disable display plane */ - temp = I915_READ(dspcntr_reg); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); - I915_READ(dspbase_reg); - } + /* Wait for the clocks to stabilize. */ + POSTING_READ(reg); + udelay(150); - /* Don't disable pipe A or pipe A PLLs if needed */ - if (pipeconf_reg == PIPEACONF && - (dev_priv->quirks & QUIRK_PIPEA_FORCE)) { - /* Wait for vblank for the disable to take effect */ + I915_WRITE(reg, temp | DPLL_VCO_ENABLE); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(reg); + udelay(150); + } + + /* Enable the pipe */ + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if ((temp & PIPECONF_ENABLE) == 0) + I915_WRITE(reg, temp | PIPECONF_ENABLE); + + /* Enable the plane */ + reg = DSPCNTR(plane); + temp = I915_READ(reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + I915_WRITE(reg, temp | DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + } + + intel_crtc_load_lut(crtc); + intel_update_fbc(dev); + + /* Give the overlay scaler a chance to enable if it's on this pipe */ + intel_crtc_dpms_overlay(intel_crtc, true); + intel_crtc_update_cursor(crtc, true); +} + +static void i9xx_crtc_disable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + u32 reg, temp; + + if (!intel_crtc->active) + return; + + /* Give the overlay scaler a chance to disable if it's on this pipe */ + intel_crtc_wait_for_pending_flips(crtc); + drm_vblank_off(dev, pipe); + intel_crtc_dpms_overlay(intel_crtc, false); + intel_crtc_update_cursor(crtc, false); + + if (dev_priv->cfb_plane == plane && + dev_priv->display.disable_fbc) + dev_priv->display.disable_fbc(dev); + + /* Disable display plane */ + reg = DSPCNTR(plane); + temp = I915_READ(reg); + if (temp & DISPLAY_PLANE_ENABLE) { + I915_WRITE(reg, temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + intel_flush_display_plane(dev, plane); + + /* Wait for vblank for the disable to take effect */ + if (IS_GEN2(dev)) intel_wait_for_vblank(dev, pipe); - goto skip_pipe_off; - } + } - /* Next, disable display pipes */ - temp = I915_READ(pipeconf_reg); - if ((temp & PIPEACONF_ENABLE) != 0) { - I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - I915_READ(pipeconf_reg); - } + /* Don't disable pipe A or pipe A PLLs if needed */ + if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + goto done; + + /* Next, disable display pipes */ + reg = PIPECONF(pipe); + temp = I915_READ(reg); + if (temp & PIPECONF_ENABLE) { + I915_WRITE(reg, temp & ~PIPECONF_ENABLE); /* Wait for the pipe to turn off */ + POSTING_READ(reg); intel_wait_for_pipe_off(dev, pipe); + } + + reg = DPLL(pipe); + temp = I915_READ(reg); + if (temp & DPLL_VCO_ENABLE) { + I915_WRITE(reg, temp & ~DPLL_VCO_ENABLE); - temp = I915_READ(dpll_reg); - if ((temp & DPLL_VCO_ENABLE) != 0) { - I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); - I915_READ(dpll_reg); - } - skip_pipe_off: /* Wait for the clocks to turn off. */ + POSTING_READ(reg); udelay(150); + } + +done: + intel_crtc->active = false; + intel_update_fbc(dev); + intel_update_watermarks(dev); + intel_clear_scanline_wait(dev); +} + +static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + i9xx_crtc_enable(crtc); + break; + case DRM_MODE_DPMS_OFF: + i9xx_crtc_disable(crtc); break; } } @@ -2388,26 +2494,9 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) return; intel_crtc->dpms_mode = mode; - intel_crtc->cursor_on = mode == DRM_MODE_DPMS_ON; - - /* When switching on the display, ensure that SR is disabled - * with multiple pipes prior to enabling to new pipe. - * - * When switching off the display, make sure the cursor is - * properly hidden prior to disabling the pipe. - */ - if (mode == DRM_MODE_DPMS_ON) - intel_update_watermarks(dev); - else - intel_crtc_update_cursor(crtc); dev_priv->display.dpms(crtc, mode); - if (mode == DRM_MODE_DPMS_ON) - intel_crtc_update_cursor(crtc); - else - intel_update_watermarks(dev); - if (!dev->primary->master) return; @@ -2432,16 +2521,46 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) } } -static void intel_crtc_prepare (struct drm_crtc *crtc) +static void intel_crtc_disable(struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + struct drm_device *dev = crtc->dev; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + + if (crtc->fb) { + mutex_lock(&dev->struct_mutex); + i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); + mutex_unlock(&dev->struct_mutex); + } } -static void intel_crtc_commit (struct drm_crtc *crtc) +/* Prepare for a mode set. + * + * Note we could be a lot smarter here. We need to figure out which outputs + * will be enabled, which disabled (in short, how the config will changes) + * and perform the minimum necessary steps to accomplish that, e.g. updating + * watermarks, FBC configuration, making sure PLLs are programmed correctly, + * panel fitting is in the proper state, etc. + */ +static void i9xx_crtc_prepare(struct drm_crtc *crtc) { - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); + i9xx_crtc_disable(crtc); +} + +static void i9xx_crtc_commit(struct drm_crtc *crtc) +{ + i9xx_crtc_enable(crtc); +} + +static void ironlake_crtc_prepare(struct drm_crtc *crtc) +{ + ironlake_crtc_disable(crtc); +} + +static void ironlake_crtc_commit(struct drm_crtc *crtc) +{ + ironlake_crtc_enable(crtc); } void intel_encoder_prepare (struct drm_encoder *encoder) @@ -2460,13 +2579,7 @@ void intel_encoder_commit (struct drm_encoder *encoder) void intel_encoder_destroy(struct drm_encoder *encoder) { - struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder); - - if (intel_encoder->ddc_bus) - intel_i2c_destroy(intel_encoder->ddc_bus); - - if (intel_encoder->i2c_bus) - intel_i2c_destroy(intel_encoder->i2c_bus); + struct intel_encoder *intel_encoder = to_intel_encoder(encoder); drm_encoder_cleanup(encoder); kfree(intel_encoder); @@ -2557,33 +2670,6 @@ static int i830_get_display_clock_speed(struct drm_device *dev) return 133000; } -/** - * Return the pipe currently connected to the panel fitter, - * or -1 if the panel fitter is not present or not in use - */ -int intel_panel_fitter_pipe (struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - u32 pfit_control; - - /* i830 doesn't have a panel fitter */ - if (IS_I830(dev)) - return -1; - - pfit_control = I915_READ(PFIT_CONTROL); - - /* See if the panel fitter is in use */ - if ((pfit_control & PFIT_ENABLE) == 0) - return -1; - - /* 965 can place panel fitter on either pipe */ - if (IS_I965G(dev)) - return (pfit_control >> 29) & 0x3; - - /* older chips can only use pipe 1 */ - return 1; -} - struct fdi_m_n { u32 tu; u32 gmch_m; @@ -2902,7 +2988,7 @@ static int i9xx_get_fifo_size(struct drm_device *dev, int plane) size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size; DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", size); + plane ? "B" : "A", size); return size; } @@ -2919,7 +3005,7 @@ static int i85x_get_fifo_size(struct drm_device *dev, int plane) size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", size); + plane ? "B" : "A", size); return size; } @@ -2934,8 +3020,8 @@ static int i845_get_fifo_size(struct drm_device *dev, int plane) size >>= 2; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", - size); + plane ? "B" : "A", + size); return size; } @@ -2950,14 +3036,14 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, - plane ? "B" : "A", size); + plane ? "B" : "A", size); return size; } static void pineview_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int unused, - int pixel_size) + int planeb_clock, int sr_hdisplay, int unused, + int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; const struct cxsr_latency *latency; @@ -3069,13 +3155,13 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; + pixel_size * sr_hdisplay; sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size); entries_required = (((sr_latency_ns / line_time_us) + 1000) / 1000) * pixel_size * 64; entries_required = DIV_ROUND_UP(entries_required, - g4x_cursor_wm_info.cacheline_size); + g4x_cursor_wm_info.cacheline_size); cursor_sr = entries_required + g4x_cursor_wm_info.guard_size; if (cursor_sr > g4x_cursor_wm_info.max_wm) @@ -3087,7 +3173,7 @@ static void g4x_update_wm(struct drm_device *dev, int planea_clock, } else { /* Turn off self refresh if both pipes are enabled */ I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) - & ~FW_BLC_SELF_EN); + & ~FW_BLC_SELF_EN); } DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", @@ -3125,7 +3211,7 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; + pixel_size * sr_hdisplay; sr_entries = DIV_ROUND_UP(sr_entries, I915_FIFO_LINE_SIZE); DRM_DEBUG("self-refresh entries: %d\n", sr_entries); srwm = I965_FIFO_SIZE - sr_entries; @@ -3134,11 +3220,11 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, srwm &= 0x1ff; sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * 64; + pixel_size * 64; sr_entries = DIV_ROUND_UP(sr_entries, i965_cursor_wm_info.cacheline_size); cursor_sr = i965_cursor_wm_info.fifo_size - - (sr_entries + i965_cursor_wm_info.guard_size); + (sr_entries + i965_cursor_wm_info.guard_size); if (cursor_sr > i965_cursor_wm_info.max_wm) cursor_sr = i965_cursor_wm_info.max_wm; @@ -3146,11 +3232,11 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, DRM_DEBUG_KMS("self-refresh watermark: display plane %d " "cursor %d\n", srwm, cursor_sr); - if (IS_I965GM(dev)) + if (IS_CRESTLINE(dev)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); } else { /* Turn off self refresh if both pipes are enabled */ - if (IS_I965GM(dev)) + if (IS_CRESTLINE(dev)) I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); } @@ -3180,9 +3266,9 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, int sr_clock, sr_entries = 0; /* Create copies of the base settings for each pipe */ - if (IS_I965GM(dev) || IS_I945GM(dev)) + if (IS_CRESTLINE(dev) || IS_I945GM(dev)) planea_params = planeb_params = i945_wm_info; - else if (IS_I9XX(dev)) + else if (!IS_GEN2(dev)) planea_params = planeb_params = i915_wm_info; else planea_params = planeb_params = i855_wm_info; @@ -3217,7 +3303,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, /* Use ns/us then divide to preserve precision */ sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; + pixel_size * sr_hdisplay; sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size); DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries); srwm = total_size - sr_entries; @@ -3242,7 +3328,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", - planea_wm, planeb_wm, cwm, srwm); + planea_wm, planeb_wm, cwm, srwm); fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f); fwater_hi = (cwm & 0x1f); @@ -3276,146 +3362,130 @@ static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused, #define ILK_LP0_PLANE_LATENCY 700 #define ILK_LP0_CURSOR_LATENCY 1300 -static void ironlake_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int sr_htotal, - int pixel_size) +static bool ironlake_compute_wm0(struct drm_device *dev, + int pipe, + int *plane_wm, + int *cursor_wm) { - struct drm_i915_private *dev_priv = dev->dev_private; - int planea_wm, planeb_wm, cursora_wm, cursorb_wm; - int sr_wm, cursor_wm; - unsigned long line_time_us; - int sr_clock, entries_required; - u32 reg_value; - int line_count; - int planea_htotal = 0, planeb_htotal = 0; struct drm_crtc *crtc; + int htotal, hdisplay, clock, pixel_size = 0; + int line_time_us, line_count, entries; - /* Need htotal for all active display plane */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) { - if (intel_crtc->plane == 0) - planea_htotal = crtc->mode.htotal; - else - planeb_htotal = crtc->mode.htotal; - } - } - - /* Calculate and update the watermark for plane A */ - if (planea_clock) { - entries_required = ((planea_clock / 1000) * pixel_size * - ILK_LP0_PLANE_LATENCY) / 1000; - entries_required = DIV_ROUND_UP(entries_required, - ironlake_display_wm_info.cacheline_size); - planea_wm = entries_required + - ironlake_display_wm_info.guard_size; - - if (planea_wm > (int)ironlake_display_wm_info.max_wm) - planea_wm = ironlake_display_wm_info.max_wm; - - /* Use the large buffer method to calculate cursor watermark */ - line_time_us = (planea_htotal * 1000) / planea_clock; - - /* Use ns/us then divide to preserve precision */ - line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000; - - /* calculate the cursor watermark for cursor A */ - entries_required = line_count * 64 * pixel_size; - entries_required = DIV_ROUND_UP(entries_required, - ironlake_cursor_wm_info.cacheline_size); - cursora_wm = entries_required + ironlake_cursor_wm_info.guard_size; - if (cursora_wm > ironlake_cursor_wm_info.max_wm) - cursora_wm = ironlake_cursor_wm_info.max_wm; - - reg_value = I915_READ(WM0_PIPEA_ILK); - reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK); - reg_value |= (planea_wm << WM0_PIPE_PLANE_SHIFT) | - (cursora_wm & WM0_PIPE_CURSOR_MASK); - I915_WRITE(WM0_PIPEA_ILK, reg_value); - DRM_DEBUG_KMS("FIFO watermarks For pipe A - plane %d, " - "cursor: %d\n", planea_wm, cursora_wm); - } - /* Calculate and update the watermark for plane B */ - if (planeb_clock) { - entries_required = ((planeb_clock / 1000) * pixel_size * - ILK_LP0_PLANE_LATENCY) / 1000; - entries_required = DIV_ROUND_UP(entries_required, - ironlake_display_wm_info.cacheline_size); - planeb_wm = entries_required + - ironlake_display_wm_info.guard_size; - - if (planeb_wm > (int)ironlake_display_wm_info.max_wm) - planeb_wm = ironlake_display_wm_info.max_wm; + crtc = intel_get_crtc_for_pipe(dev, pipe); + if (crtc->fb == NULL || !crtc->enabled) + return false; - /* Use the large buffer method to calculate cursor watermark */ - line_time_us = (planeb_htotal * 1000) / planeb_clock; + htotal = crtc->mode.htotal; + hdisplay = crtc->mode.hdisplay; + clock = crtc->mode.clock; + pixel_size = crtc->fb->bits_per_pixel / 8; + + /* Use the small buffer method to calculate plane watermark */ + entries = ((clock * pixel_size / 1000) * ILK_LP0_PLANE_LATENCY) / 1000; + entries = DIV_ROUND_UP(entries, + ironlake_display_wm_info.cacheline_size); + *plane_wm = entries + ironlake_display_wm_info.guard_size; + if (*plane_wm > (int)ironlake_display_wm_info.max_wm) + *plane_wm = ironlake_display_wm_info.max_wm; + + /* Use the large buffer method to calculate cursor watermark */ + line_time_us = ((htotal * 1000) / clock); + line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000; + entries = line_count * 64 * pixel_size; + entries = DIV_ROUND_UP(entries, + ironlake_cursor_wm_info.cacheline_size); + *cursor_wm = entries + ironlake_cursor_wm_info.guard_size; + if (*cursor_wm > ironlake_cursor_wm_info.max_wm) + *cursor_wm = ironlake_cursor_wm_info.max_wm; - /* Use ns/us then divide to preserve precision */ - line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000; + return true; +} - /* calculate the cursor watermark for cursor B */ - entries_required = line_count * 64 * pixel_size; - entries_required = DIV_ROUND_UP(entries_required, - ironlake_cursor_wm_info.cacheline_size); - cursorb_wm = entries_required + ironlake_cursor_wm_info.guard_size; - if (cursorb_wm > ironlake_cursor_wm_info.max_wm) - cursorb_wm = ironlake_cursor_wm_info.max_wm; +static void ironlake_update_wm(struct drm_device *dev, + int planea_clock, int planeb_clock, + int sr_hdisplay, int sr_htotal, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int plane_wm, cursor_wm, enabled; + int tmp; + + enabled = 0; + if (ironlake_compute_wm0(dev, 0, &plane_wm, &cursor_wm)) { + I915_WRITE(WM0_PIPEA_ILK, + (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); + DRM_DEBUG_KMS("FIFO watermarks For pipe A -" + " plane %d, " "cursor: %d\n", + plane_wm, cursor_wm); + enabled++; + } - reg_value = I915_READ(WM0_PIPEB_ILK); - reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK); - reg_value |= (planeb_wm << WM0_PIPE_PLANE_SHIFT) | - (cursorb_wm & WM0_PIPE_CURSOR_MASK); - I915_WRITE(WM0_PIPEB_ILK, reg_value); - DRM_DEBUG_KMS("FIFO watermarks For pipe B - plane %d, " - "cursor: %d\n", planeb_wm, cursorb_wm); + if (ironlake_compute_wm0(dev, 1, &plane_wm, &cursor_wm)) { + I915_WRITE(WM0_PIPEB_ILK, + (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); + DRM_DEBUG_KMS("FIFO watermarks For pipe B -" + " plane %d, cursor: %d\n", + plane_wm, cursor_wm); + enabled++; } /* * Calculate and update the self-refresh watermark only when one * display plane is used. */ - if (!planea_clock || !planeb_clock) { - + tmp = 0; + if (enabled == 1 && /* XXX disabled due to buggy implmentation? */ 0) { + unsigned long line_time_us; + int small, large, plane_fbc; + int sr_clock, entries; + int line_count, line_size; /* Read the self-refresh latency. The unit is 0.5us */ int ilk_sr_latency = I915_READ(MLTR_ILK) & ILK_SRLT_MASK; sr_clock = planea_clock ? planea_clock : planeb_clock; - line_time_us = ((sr_htotal * 1000) / sr_clock); + line_time_us = (sr_htotal * 1000) / sr_clock; /* Use ns/us then divide to preserve precision */ line_count = ((ilk_sr_latency * 500) / line_time_us + 1000) - / 1000; + / 1000; + line_size = sr_hdisplay * pixel_size; - /* calculate the self-refresh watermark for display plane */ - entries_required = line_count * sr_hdisplay * pixel_size; - entries_required = DIV_ROUND_UP(entries_required, - ironlake_display_srwm_info.cacheline_size); - sr_wm = entries_required + - ironlake_display_srwm_info.guard_size; + /* Use the minimum of the small and large buffer method for primary */ + small = ((sr_clock * pixel_size / 1000) * (ilk_sr_latency * 500)) / 1000; + large = line_count * line_size; - /* calculate the self-refresh watermark for display cursor */ - entries_required = line_count * pixel_size * 64; - entries_required = DIV_ROUND_UP(entries_required, - ironlake_cursor_srwm_info.cacheline_size); - cursor_wm = entries_required + - ironlake_cursor_srwm_info.guard_size; + entries = DIV_ROUND_UP(min(small, large), + ironlake_display_srwm_info.cacheline_size); - /* configure watermark and enable self-refresh */ - reg_value = I915_READ(WM1_LP_ILK); - reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK | - WM1_LP_CURSOR_MASK); - reg_value |= (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) | - (sr_wm << WM1_LP_SR_SHIFT) | cursor_wm; + plane_fbc = entries * 64; + plane_fbc = DIV_ROUND_UP(plane_fbc, line_size); - I915_WRITE(WM1_LP_ILK, reg_value); - DRM_DEBUG_KMS("self-refresh watermark: display plane %d " - "cursor %d\n", sr_wm, cursor_wm); + plane_wm = entries + ironlake_display_srwm_info.guard_size; + if (plane_wm > (int)ironlake_display_srwm_info.max_wm) + plane_wm = ironlake_display_srwm_info.max_wm; - } else { - /* Turn off self refresh if both pipes are enabled */ - I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN); - } + /* calculate the self-refresh watermark for display cursor */ + entries = line_count * pixel_size * 64; + entries = DIV_ROUND_UP(entries, + ironlake_cursor_srwm_info.cacheline_size); + + cursor_wm = entries + ironlake_cursor_srwm_info.guard_size; + if (cursor_wm > (int)ironlake_cursor_srwm_info.max_wm) + cursor_wm = ironlake_cursor_srwm_info.max_wm; + + /* configure watermark and enable self-refresh */ + tmp = (WM1_LP_SR_EN | + (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) | + (plane_fbc << WM1_LP_FBC_SHIFT) | + (plane_wm << WM1_LP_SR_SHIFT) | + cursor_wm); + DRM_DEBUG_KMS("self-refresh watermark: display plane %d, fbc lines %d," + " cursor %d\n", plane_wm, plane_fbc, cursor_wm); + } + I915_WRITE(WM1_LP_ILK, tmp); + /* XXX setup WM2 and WM3 */ } + /** * intel_update_watermarks - update FIFO watermark values based on current modes * @@ -3447,7 +3517,7 @@ static void ironlake_update_wm(struct drm_device *dev, int planea_clock, * * We don't use the sprite, so we can ignore that. And on Crestline we have * to set the non-SR watermarks to 8. - */ + */ static void intel_update_watermarks(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3463,15 +3533,15 @@ static void intel_update_watermarks(struct drm_device *dev) /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) { + if (intel_crtc->active) { enabled++; if (intel_crtc->plane == 0) { DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n", - intel_crtc->pipe, crtc->mode.clock); + intel_crtc->pipe, crtc->mode.clock); planea_clock = crtc->mode.clock; } else { DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n", - intel_crtc->pipe, crtc->mode.clock); + intel_crtc->pipe, crtc->mode.clock); planeb_clock = crtc->mode.clock; } sr_hdisplay = crtc->mode.hdisplay; @@ -3502,62 +3572,35 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int fp_reg = (pipe == 0) ? FPA0 : FPB0; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; - int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; - int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE; - int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + u32 fp_reg, dpll_reg; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf; + u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; - struct drm_encoder *encoder; + struct intel_encoder *encoder; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; - int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1; - int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1; - int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1; - int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1; - int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0; - int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; - int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL; - int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL; - int trans_dpll_sel = (pipe == 0) ? 0 : 1; - int lvds_reg = LVDS; - u32 temp; - int sdvo_pixel_multiply; + u32 reg, temp; int target_clock; drm_vblank_pre_modeset(dev, pipe); - list_for_each_entry(encoder, &mode_config->encoder_list, head) { - struct intel_encoder *intel_encoder; - - if (encoder->crtc != crtc) + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) continue; - intel_encoder = enc_to_intel_encoder(encoder); - switch (intel_encoder->type) { + switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; - if (intel_encoder->needs_tv_clock) + if (encoder->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_DVO: @@ -3573,7 +3616,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, is_dp = true; break; case INTEL_OUTPUT_EDP: - has_edp_encoder = intel_encoder; + has_edp_encoder = encoder; break; } @@ -3583,15 +3626,15 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", - refclk / 1000); - } else if (IS_I9XX(dev)) { + refclk / 1000); + } else if (!IS_GEN2(dev)) { refclk = 96000; - if (HAS_PCH_SPLIT(dev)) + if (HAS_PCH_SPLIT(dev) && + (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base))) refclk = 120000; /* 120Mhz refclk */ } else { refclk = 48000; } - /* * Returns a set of divisors for the desired target clock with the given @@ -3607,13 +3650,13 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } /* Ensure that the cursor is valid for the new mode before changing... */ - intel_crtc_update_cursor(crtc); + intel_crtc_update_cursor(crtc, true); if (is_lvds && dev_priv->lvds_downclock_avail) { has_reduced_clock = limit->find_pll(limit, crtc, - dev_priv->lvds_downclock, - refclk, - &reduced_clock); + dev_priv->lvds_downclock, + refclk, + &reduced_clock); if (has_reduced_clock && (clock.p != reduced_clock.p)) { /* * If the different P is found, it means that we can't @@ -3622,7 +3665,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * feature. */ DRM_DEBUG_KMS("Different P is found for " - "LVDS clock/downclock\n"); + "LVDS clock/downclock\n"); has_reduced_clock = 0; } } @@ -3630,14 +3673,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, this mirrors vbios setting. */ if (is_sdvo && is_tv) { if (adjusted_mode->clock >= 100000 - && adjusted_mode->clock < 140500) { + && adjusted_mode->clock < 140500) { clock.p1 = 2; clock.p2 = 10; clock.n = 3; clock.m1 = 16; clock.m2 = 8; } else if (adjusted_mode->clock >= 140500 - && adjusted_mode->clock <= 200000) { + && adjusted_mode->clock <= 200000) { clock.p1 = 1; clock.p2 = 10; clock.n = 6; @@ -3649,34 +3692,41 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (HAS_PCH_SPLIT(dev)) { int lane = 0, link_bw, bpp; - /* eDP doesn't require FDI link, so just set DP M/N + /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ - if (has_edp_encoder) { + if (has_edp_encoder && !intel_encoder_is_pch_edp(&encoder->base)) { target_clock = mode->clock; intel_edp_link_config(has_edp_encoder, &lane, &link_bw); } else { - /* DP over FDI requires target mode clock + /* [e]DP over FDI requires target mode clock instead of link clock */ - if (is_dp) + if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) target_clock = mode->clock; else target_clock = adjusted_mode->clock; - link_bw = 270000; + + /* FDI is a binary signal running at ~2.7GHz, encoding + * each output octet as 10 bits. The actual frequency + * is stored as a divider into a 100MHz clock, and the + * mode pixel clock is stored in units of 1KHz. + * Hence the bw of each lane in terms of the mode signal + * is: + */ + link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; } /* determine panel color depth */ - temp = I915_READ(pipeconf_reg); + temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; if (is_lvds) { - int lvds_reg = I915_READ(PCH_LVDS); /* the BPC will be 6 if it is 18-bit LVDS panel */ - if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) + if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) temp |= PIPE_8BPC; else temp |= PIPE_6BPC; - } else if (has_edp_encoder || (is_dp && intel_pch_has_edp(crtc))) { - switch (dev_priv->edp_bpp/3) { + } else if (has_edp_encoder) { + switch (dev_priv->edp.bpp/3) { case 8: temp |= PIPE_8BPC; break; @@ -3692,8 +3742,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } else temp |= PIPE_8BPC; - I915_WRITE(pipeconf_reg, temp); - I915_READ(pipeconf_reg); + I915_WRITE(PIPECONF(pipe), temp); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: @@ -3738,33 +3787,39 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Always enable nonspread source */ temp &= ~DREF_NONSPREAD_SOURCE_MASK; temp |= DREF_NONSPREAD_SOURCE_ENABLE; - I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); - temp &= ~DREF_SSC_SOURCE_MASK; temp |= DREF_SSC_SOURCE_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); + POSTING_READ(PCH_DREF_CONTROL); udelay(200); if (has_edp_encoder) { if (dev_priv->lvds_use_ssc) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); - udelay(200); - - temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; - temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; - I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); + udelay(200); + } + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + + /* Enable CPU source on CPU attached eDP */ + if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { + if (dev_priv->lvds_use_ssc) + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + else + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else { - temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; - I915_WRITE(PCH_DREF_CONTROL, temp); - POSTING_READ(PCH_DREF_CONTROL); + /* Enable SSC on PCH eDP if needed */ + if (dev_priv->lvds_use_ssc) { + DRM_ERROR("enabling SSC on PCH\n"); + temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; + } } + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + udelay(200); } } @@ -3780,23 +3835,26 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, reduced_clock.m2; } + dpll = 0; if (!HAS_PCH_SPLIT(dev)) dpll = DPLL_VGA_MODE_DIS; - if (IS_I9XX(dev)) { + if (!IS_GEN2(dev)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + if (pixel_multiplier > 1) { + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + else if (HAS_PCH_SPLIT(dev)) + dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; + } dpll |= DPLL_DVO_HIGH_SPEED; - sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; - if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) - dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - else if (HAS_PCH_SPLIT(dev)) - dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } - if (is_dp) + if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ @@ -3824,7 +3882,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } - if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) + if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { @@ -3851,7 +3909,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ - pipeconf = I915_READ(pipeconf_reg); + pipeconf = I915_READ(PIPECONF(pipe)); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; @@ -3865,7 +3923,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dspcntr |= DISPPLANE_SEL_PIPE_B; } - if (pipe == 0 && !IS_I965G(dev)) { + if (pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. * @@ -3874,51 +3932,47 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, */ if (mode->clock > dev_priv->display.get_display_clock_speed(dev) * 9 / 10) - pipeconf |= PIPEACONF_DOUBLE_WIDE; + pipeconf |= PIPECONF_DOUBLE_WIDE; else - pipeconf &= ~PIPEACONF_DOUBLE_WIDE; + pipeconf &= ~PIPECONF_DOUBLE_WIDE; } dspcntr |= DISPLAY_PLANE_ENABLE; - pipeconf |= PIPEACONF_ENABLE; + pipeconf |= PIPECONF_ENABLE; dpll |= DPLL_VCO_ENABLE; - - /* Disable the panel fitter if it was on our pipe */ - if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe) - I915_WRITE(PFIT_CONTROL, 0); - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); /* assign to Ironlake registers */ if (HAS_PCH_SPLIT(dev)) { - fp_reg = pch_fp_reg; - dpll_reg = pch_dpll_reg; + fp_reg = PCH_FP0(pipe); + dpll_reg = PCH_DPLL(pipe); + } else { + fp_reg = FP0(pipe); + dpll_reg = DPLL(pipe); } - if (!has_edp_encoder) { + /* PCH eDP needs FDI, but CPU eDP does not */ + if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); - I915_READ(dpll_reg); + + POSTING_READ(dpll_reg); udelay(150); } /* enable transcoder DPLL */ if (HAS_PCH_CPT(dev)) { temp = I915_READ(PCH_DPLL_SEL); - if (trans_dpll_sel == 0) - temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); + if (pipe == 0) + temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL; else - temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); + temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL; I915_WRITE(PCH_DPLL_SEL, temp); - I915_READ(PCH_DPLL_SEL); - udelay(150); - } - if (HAS_PCH_SPLIT(dev)) { - pipeconf &= ~PIPE_ENABLE_DITHER; - pipeconf &= ~PIPE_DITHER_TYPE_MASK; + POSTING_READ(PCH_DPLL_SEL); + udelay(150); } /* The LVDS pin pair needs to be on before the DPLLs are enabled. @@ -3926,58 +3980,60 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, * things on. */ if (is_lvds) { - u32 lvds; - + reg = LVDS; if (HAS_PCH_SPLIT(dev)) - lvds_reg = PCH_LVDS; + reg = PCH_LVDS; - lvds = I915_READ(lvds_reg); - lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + temp = I915_READ(reg); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (pipe == 1) { if (HAS_PCH_CPT(dev)) - lvds |= PORT_TRANS_B_SEL_CPT; + temp |= PORT_TRANS_B_SEL_CPT; else - lvds |= LVDS_PIPEB_SELECT; + temp |= LVDS_PIPEB_SELECT; } else { if (HAS_PCH_CPT(dev)) - lvds &= ~PORT_TRANS_SEL_MASK; + temp &= ~PORT_TRANS_SEL_MASK; else - lvds &= ~LVDS_PIPEB_SELECT; + temp &= ~LVDS_PIPEB_SELECT; } /* set the corresponsding LVDS_BORDER bit */ - lvds |= dev_priv->lvds_border_bits; + temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) - lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else - lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ - /* set the dithering flag */ - if (IS_I965G(dev)) { - if (dev_priv->lvds_dither) { - if (HAS_PCH_SPLIT(dev)) { - pipeconf |= PIPE_ENABLE_DITHER; - pipeconf |= PIPE_DITHER_TYPE_ST01; - } else - lvds |= LVDS_ENABLE_DITHER; - } else { - if (!HAS_PCH_SPLIT(dev)) { - lvds &= ~LVDS_ENABLE_DITHER; - } - } + /* set the dithering flag on non-PCH LVDS as needed */ + if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; } - I915_WRITE(lvds_reg, lvds); - I915_READ(lvds_reg); + I915_WRITE(reg, temp); } - if (is_dp) + + /* set the dithering flag and clear for anything other than a panel. */ + if (HAS_PCH_SPLIT(dev)) { + pipeconf &= ~PIPECONF_DITHER_EN; + pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; + if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { + pipeconf |= PIPECONF_DITHER_EN; + pipeconf |= PIPECONF_DITHER_TYPE_ST1; + } + } + + if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); - else if (HAS_PCH_SPLIT(dev)) { + } else if (HAS_PCH_SPLIT(dev)) { /* For non-DP output, clear any trans DP clock recovery setting.*/ if (pipe == 0) { I915_WRITE(TRANSA_DATA_M1, 0); @@ -3992,29 +4048,35 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } - if (!has_edp_encoder) { + if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); - I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + POSTING_READ(dpll_reg); udelay(150); - if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) { + if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) { + temp = 0; if (is_sdvo) { - sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; - I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | - ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); - } else - I915_WRITE(dpll_md_reg, 0); + temp = intel_mode_get_pixel_multiplier(adjusted_mode); + if (temp > 1) + temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; + else + temp = 0; + } + I915_WRITE(DPLL_MD(pipe), temp); } else { /* write it again -- the BIOS does, after all */ I915_WRITE(dpll_reg, dpll); } - I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + POSTING_READ(dpll_reg); udelay(150); } + intel_crtc->lowfreq_avail = false; if (is_lvds && has_reduced_clock && i915_powersave) { I915_WRITE(fp_reg + 4, fp2); intel_crtc->lowfreq_avail = true; @@ -4024,7 +4086,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } else { I915_WRITE(fp_reg + 4, fp); - intel_crtc->lowfreq_avail = false; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; @@ -4043,70 +4104,62 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } else pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */ - I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + I915_WRITE(HTOTAL(pipe), + (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); - I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + I915_WRITE(HBLANK(pipe), + (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); - I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + I915_WRITE(HSYNC(pipe), + (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); - I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + + I915_WRITE(VTOTAL(pipe), + (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); - I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + I915_WRITE(VBLANK(pipe), + (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); - I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + I915_WRITE(VSYNC(pipe), + (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - /* pipesrc and dspsize control the size that is scaled from, which should - * always be the user's requested size. + + /* pipesrc and dspsize control the size that is scaled from, + * which should always be the user's requested size. */ if (!HAS_PCH_SPLIT(dev)) { - I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | - (mode->hdisplay - 1)); - I915_WRITE(dsppos_reg, 0); + I915_WRITE(DSPSIZE(plane), + ((mode->vdisplay - 1) << 16) | + (mode->hdisplay - 1)); + I915_WRITE(DSPPOS(plane), 0); } - I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + I915_WRITE(PIPESRC(pipe), + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); if (HAS_PCH_SPLIT(dev)) { - I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m); - I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n); - I915_WRITE(link_m1_reg, m_n.link_m); - I915_WRITE(link_n1_reg, m_n.link_n); + I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); + I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); + I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); + I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); - if (has_edp_encoder) { + if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); - } else { - /* enable FDI RX PLL too */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE); - I915_READ(fdi_rx_reg); - udelay(200); - - /* enable FDI TX PLL too */ - temp = I915_READ(fdi_tx_reg); - I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE); - I915_READ(fdi_tx_reg); - - /* enable FDI RX PCDCLK */ - temp = I915_READ(fdi_rx_reg); - I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK); - I915_READ(fdi_rx_reg); - udelay(200); } } - I915_WRITE(pipeconf_reg, pipeconf); - I915_READ(pipeconf_reg); + I915_WRITE(PIPECONF(pipe), pipeconf); + POSTING_READ(PIPECONF(pipe)); intel_wait_for_vblank(dev, pipe); - if (IS_IRONLAKE(dev)) { + if (IS_GEN5(dev)) { /* enable address swizzle for tiling buffer */ temp = I915_READ(DISP_ARB_CTL); I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING); } - I915_WRITE(dspcntr_reg, dspcntr); + I915_WRITE(DSPCNTR(plane), dspcntr); - /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); intel_update_watermarks(dev); @@ -4199,7 +4252,8 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) } /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ -static void intel_crtc_update_cursor(struct drm_crtc *crtc) +static void intel_crtc_update_cursor(struct drm_crtc *crtc, + bool on) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4212,7 +4266,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc) pos = 0; - if (intel_crtc->cursor_on && crtc->fb) { + if (on && crtc->enabled && crtc->fb) { base = intel_crtc->cursor_addr; if (x > (int) crtc->fb->width) base = 0; @@ -4324,7 +4378,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, addr = obj_priv->phys_obj->handle->busaddr; } - if (!IS_I9XX(dev)) + if (IS_GEN2(dev)) I915_WRITE(CURSIZE, (height << 12) | width); finish: @@ -4344,7 +4398,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, intel_crtc->cursor_width = width; intel_crtc->cursor_height = height; - intel_crtc_update_cursor(crtc); + intel_crtc_update_cursor(crtc, true); return 0; fail_unpin: @@ -4363,7 +4417,7 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) intel_crtc->cursor_x = x; intel_crtc->cursor_y = y; - intel_crtc_update_cursor(crtc); + intel_crtc_update_cursor(crtc, true); return 0; } @@ -4432,7 +4486,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, struct intel_crtc *intel_crtc; struct drm_crtc *possible_crtc; struct drm_crtc *supported_crtc =NULL; - struct drm_encoder *encoder = &intel_encoder->enc; + struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; @@ -4513,7 +4567,7 @@ struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, struct drm_connector *connector, int dpms_mode) { - struct drm_encoder *encoder = &intel_encoder->enc; + struct drm_encoder *encoder = &intel_encoder->base; struct drm_device *dev = encoder->dev; struct drm_crtc *crtc = encoder->crtc; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; @@ -4559,7 +4613,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; } - if (IS_I9XX(dev)) { + if (!IS_GEN2(dev)) { if (IS_PINEVIEW(dev)) clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); @@ -4663,8 +4717,6 @@ static void intel_gpu_idle_timer(unsigned long arg) struct drm_device *dev = (struct drm_device *)arg; drm_i915_private_t *dev_priv = dev->dev_private; - DRM_DEBUG_DRIVER("idle timer fired, downclocking\n"); - dev_priv->busy = false; queue_work(dev_priv->wq, &dev_priv->idle_work); @@ -4678,14 +4730,12 @@ static void intel_crtc_idle_timer(unsigned long arg) struct drm_crtc *crtc = &intel_crtc->base; drm_i915_private_t *dev_priv = crtc->dev->dev_private; - DRM_DEBUG_DRIVER("idle timer fired, downclocking\n"); - intel_crtc->busy = false; queue_work(dev_priv->wq, &dev_priv->idle_work); } -static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule) +static void intel_increase_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; @@ -4720,9 +4770,8 @@ static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule) } /* Schedule downclock */ - if (schedule) - mod_timer(&intel_crtc->idle_timer, jiffies + - msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); + mod_timer(&intel_crtc->idle_timer, jiffies + + msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); } static void intel_decrease_pllclock(struct drm_crtc *crtc) @@ -4858,7 +4907,7 @@ void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj) I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK); } /* Non-busy -> busy, upclock */ - intel_increase_pllclock(crtc, true); + intel_increase_pllclock(crtc); intel_crtc->busy = true; } else { /* Busy -> busy, put off timer */ @@ -4872,8 +4921,22 @@ void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj) static void intel_crtc_destroy(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct intel_unpin_work *work; + unsigned long flags; + + spin_lock_irqsave(&dev->event_lock, flags); + work = intel_crtc->unpin_work; + intel_crtc->unpin_work = NULL; + spin_unlock_irqrestore(&dev->event_lock, flags); + + if (work) { + cancel_work_sync(&work->work); + kfree(work); + } drm_crtc_cleanup(crtc); + kfree(intel_crtc); } @@ -4928,12 +4991,11 @@ static void do_intel_finish_page_flip(struct drm_device *dev, spin_unlock_irqrestore(&dev->event_lock, flags); - obj_priv = to_intel_bo(work->pending_flip_obj); - - /* Initial scanout buffer will have a 0 pending flip count */ - if ((atomic_read(&obj_priv->pending_flip) == 0) || - atomic_dec_and_test(&obj_priv->pending_flip)) - DRM_WAKEUP(&dev_priv->pending_flip_queue); + obj_priv = to_intel_bo(work->old_fb_obj); + atomic_clear_mask(1 << intel_crtc->plane, + &obj_priv->pending_flip.counter); + if (atomic_read(&obj_priv->pending_flip) == 0) + wake_up(&dev_priv->pending_flip_queue); schedule_work(&work->work); trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj); @@ -5014,7 +5076,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, obj = intel_fb->obj; mutex_lock(&dev->struct_mutex); - ret = intel_pin_and_fence_fb_obj(dev, obj); + ret = intel_pin_and_fence_fb_obj(dev, obj, true); if (ret) goto cleanup_work; @@ -5023,29 +5085,33 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, drm_gem_object_reference(obj); crtc->fb = fb; - ret = i915_gem_object_flush_write_domain(obj); - if (ret) - goto cleanup_objs; ret = drm_vblank_get(dev, intel_crtc->pipe); if (ret) goto cleanup_objs; - obj_priv = to_intel_bo(obj); - atomic_inc(&obj_priv->pending_flip); + /* Block clients from rendering to the new back buffer until + * the flip occurs and the object is no longer visible. + */ + atomic_add(1 << intel_crtc->plane, + &to_intel_bo(work->old_fb_obj)->pending_flip); + work->pending_flip_obj = obj; + obj_priv = to_intel_bo(obj); if (IS_GEN3(dev) || IS_GEN2(dev)) { u32 flip_mask; + /* Can't queue multiple flips, so wait for the previous + * one to finish before executing the next. + */ + BEGIN_LP_RING(2); if (intel_crtc->plane) flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; else flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - - BEGIN_LP_RING(2); OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); - OUT_RING(0); + OUT_RING(MI_NOOP); ADVANCE_LP_RING(); } @@ -5126,15 +5192,14 @@ cleanup_work: return ret; } -static const struct drm_crtc_helper_funcs intel_helper_funcs = { +static struct drm_crtc_helper_funcs intel_helper_funcs = { .dpms = intel_crtc_dpms, .mode_fixup = intel_crtc_mode_fixup, .mode_set = intel_crtc_mode_set, .mode_set_base = intel_pipe_set_base, .mode_set_base_atomic = intel_pipe_set_base_atomic, - .prepare = intel_crtc_prepare, - .commit = intel_crtc_commit, .load_lut = intel_crtc_load_lut, + .disable = intel_crtc_disable, }; static const struct drm_crtc_funcs intel_crtc_funcs = { @@ -5160,8 +5225,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); - intel_crtc->pipe = pipe; - intel_crtc->plane = pipe; for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; @@ -5171,9 +5234,9 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) /* Swap pipes & planes for FBC on pre-965 */ intel_crtc->pipe = pipe; intel_crtc->plane = pipe; - if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) { + if (IS_MOBILE(dev) && IS_GEN3(dev)) { DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); - intel_crtc->plane = ((pipe == 0) ? 1 : 0); + intel_crtc->plane = !pipe; } BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || @@ -5183,6 +5246,16 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) intel_crtc->cursor_addr = 0; intel_crtc->dpms_mode = -1; + intel_crtc->active = true; /* force the pipe off on setup_init_config */ + + if (HAS_PCH_SPLIT(dev)) { + intel_helper_funcs.prepare = ironlake_crtc_prepare; + intel_helper_funcs.commit = ironlake_crtc_commit; + } else { + intel_helper_funcs.prepare = i9xx_crtc_prepare; + intel_helper_funcs.commit = i9xx_crtc_commit; + } + drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); intel_crtc->busy = false; @@ -5218,38 +5291,25 @@ int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, return 0; } -struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) -{ - struct drm_crtc *crtc = NULL; - - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - if (intel_crtc->pipe == pipe) - break; - } - return crtc; -} - static int intel_encoder_clones(struct drm_device *dev, int type_mask) { + struct intel_encoder *encoder; int index_mask = 0; - struct drm_encoder *encoder; int entry = 0; - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder); - if (type_mask & intel_encoder->clone_mask) + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + if (type_mask & encoder->clone_mask) index_mask |= (1 << entry); entry++; } + return index_mask; } - static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_encoder *encoder; + struct intel_encoder *encoder; bool dpd_is_edp = false; if (IS_MOBILE(dev) && !IS_I830(dev)) @@ -5338,12 +5398,10 @@ static void intel_setup_outputs(struct drm_device *dev) if (SUPPORTS_TV(dev)) intel_tv_init(dev); - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder); - - encoder->possible_crtcs = intel_encoder->crtc_mask; - encoder->possible_clones = intel_encoder_clones(dev, - intel_encoder->clone_mask); + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + encoder->base.possible_crtcs = encoder->crtc_mask; + encoder->base.possible_clones = + intel_encoder_clones(dev, encoder->clone_mask); } } @@ -5377,8 +5435,25 @@ int intel_framebuffer_init(struct drm_device *dev, struct drm_mode_fb_cmd *mode_cmd, struct drm_gem_object *obj) { + struct drm_i915_gem_object *obj_priv = to_intel_bo(obj); int ret; + if (obj_priv->tiling_mode == I915_TILING_Y) + return -EINVAL; + + if (mode_cmd->pitch & 63) + return -EINVAL; + + switch (mode_cmd->bpp) { + case 8: + case 16: + case 24: + case 32: + break; + default: + return -EINVAL; + } + ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); if (ret) { DRM_ERROR("framebuffer init failed %d\n", ret); @@ -5487,6 +5562,10 @@ void ironlake_enable_drps(struct drm_device *dev) u32 rgvmodectl = I915_READ(MEMMODECTL); u8 fmax, fmin, fstart, vstart; + /* Enable temp reporting */ + I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN); + I915_WRITE16(TSC1, I915_READ(TSC1) | TSE); + /* 100ms RC evaluation intervals */ I915_WRITE(RCUPEI, 100000); I915_WRITE(RCDNEI, 100000); @@ -5529,7 +5608,7 @@ void ironlake_enable_drps(struct drm_device *dev) rgvmodectl |= MEMMODE_SWMODE_EN; I915_WRITE(MEMMODECTL, rgvmodectl); - if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 1, 0)) + if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10)) DRM_ERROR("stuck trying to change perf mode\n"); msleep(1); @@ -5660,7 +5739,7 @@ void intel_init_clock_gating(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; - if (IS_IRONLAKE(dev)) { + if (IS_GEN5(dev)) { /* Required for FBC */ dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE; /* Required for CxSR */ @@ -5674,13 +5753,20 @@ void intel_init_clock_gating(struct drm_device *dev) I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); /* + * On Ibex Peak and Cougar Point, we need to disable clock + * gating for the panel power sequencer or it will fail to + * start up when no ports are active. + */ + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); + + /* * According to the spec the following bits should be set in * order to enable memory self-refresh * The bit 22/21 of 0x42004 * The bit 5 of 0x42020 * The bit 15 of 0x45000 */ - if (IS_IRONLAKE(dev)) { + if (IS_GEN5(dev)) { I915_WRITE(ILK_DISPLAY_CHICKEN2, (I915_READ(ILK_DISPLAY_CHICKEN2) | ILK_DPARB_GATE | ILK_VSDPFD_FULL)); @@ -5728,20 +5814,20 @@ void intel_init_clock_gating(struct drm_device *dev) if (IS_GM45(dev)) dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; I915_WRITE(DSPCLK_GATE_D, dspclk_gate); - } else if (IS_I965GM(dev)) { + } else if (IS_CRESTLINE(dev)) { I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); I915_WRITE(RENCLK_GATE_D2, 0); I915_WRITE(DSPCLK_GATE_D, 0); I915_WRITE(RAMCLK_GATE_D, 0); I915_WRITE16(DEUC, 0); - } else if (IS_I965G(dev)) { + } else if (IS_BROADWATER(dev)) { I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | I965_RCC_CLOCK_GATE_DISABLE | I965_RCPB_CLOCK_GATE_DISABLE | I965_ISC_CLOCK_GATE_DISABLE | I965_FBC_CLOCK_GATE_DISABLE); I915_WRITE(RENCLK_GATE_D2, 0); - } else if (IS_I9XX(dev)) { + } else if (IS_GEN3(dev)) { u32 dstate = I915_READ(D_STATE); dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | @@ -5823,7 +5909,7 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.fbc_enabled = g4x_fbc_enabled; dev_priv->display.enable_fbc = g4x_enable_fbc; dev_priv->display.disable_fbc = g4x_disable_fbc; - } else if (IS_I965GM(dev)) { + } else if (IS_CRESTLINE(dev)) { dev_priv->display.fbc_enabled = i8xx_fbc_enabled; dev_priv->display.enable_fbc = i8xx_enable_fbc; dev_priv->display.disable_fbc = i8xx_disable_fbc; @@ -5856,7 +5942,7 @@ static void intel_init_display(struct drm_device *dev) /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { - if (IS_IRONLAKE(dev)) { + if (IS_GEN5(dev)) { if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK) dev_priv->display.update_wm = ironlake_update_wm; else { @@ -5883,9 +5969,9 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.update_wm = pineview_update_wm; } else if (IS_G4X(dev)) dev_priv->display.update_wm = g4x_update_wm; - else if (IS_I965G(dev)) + else if (IS_GEN4(dev)) dev_priv->display.update_wm = i965_update_wm; - else if (IS_I9XX(dev)) { + else if (IS_GEN3(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i9xx_get_fifo_size; } else if (IS_I85X(dev)) { @@ -5999,24 +6085,24 @@ void intel_modeset_init(struct drm_device *dev) intel_init_display(dev); - if (IS_I965G(dev)) { - dev->mode_config.max_width = 8192; - dev->mode_config.max_height = 8192; - } else if (IS_I9XX(dev)) { + if (IS_GEN2(dev)) { + dev->mode_config.max_width = 2048; + dev->mode_config.max_height = 2048; + } else if (IS_GEN3(dev)) { dev->mode_config.max_width = 4096; dev->mode_config.max_height = 4096; } else { - dev->mode_config.max_width = 2048; - dev->mode_config.max_height = 2048; + dev->mode_config.max_width = 8192; + dev->mode_config.max_height = 8192; } /* set memory base */ - if (IS_I9XX(dev)) - dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2); - else + if (IS_GEN2(dev)) dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0); + else + dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2); - if (IS_MOBILE(dev) || IS_I9XX(dev)) + if (IS_MOBILE(dev) || !IS_GEN2(dev)) dev_priv->num_pipe = 2; else dev_priv->num_pipe = 1; @@ -6052,10 +6138,11 @@ void intel_modeset_cleanup(struct drm_device *dev) struct drm_crtc *crtc; struct intel_crtc *intel_crtc; + drm_kms_helper_poll_fini(dev); mutex_lock(&dev->struct_mutex); - drm_kms_helper_poll_fini(dev); - intel_fbdev_fini(dev); + intel_unregister_dsm_handler(); + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ @@ -6063,12 +6150,9 @@ void intel_modeset_cleanup(struct drm_device *dev) continue; intel_crtc = to_intel_crtc(crtc); - intel_increase_pllclock(crtc, false); - del_timer_sync(&intel_crtc->idle_timer); + intel_increase_pllclock(crtc); } - del_timer_sync(&dev_priv->idle_timer); - if (dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); @@ -6097,33 +6181,36 @@ void intel_modeset_cleanup(struct drm_device *dev) mutex_unlock(&dev->struct_mutex); + /* Disable the irq before mode object teardown, for the irq might + * enqueue unpin/hotplug work. */ + drm_irq_uninstall(dev); + cancel_work_sync(&dev_priv->hotplug_work); + + /* Shut off idle work before the crtcs get freed. */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + intel_crtc = to_intel_crtc(crtc); + del_timer_sync(&intel_crtc->idle_timer); + } + del_timer_sync(&dev_priv->idle_timer); + cancel_work_sync(&dev_priv->idle_work); + drm_mode_config_cleanup(dev); } - /* * Return which encoder is currently attached for connector. */ -struct drm_encoder *intel_attached_encoder (struct drm_connector *connector) +struct drm_encoder *intel_best_encoder(struct drm_connector *connector) { - struct drm_mode_object *obj; - struct drm_encoder *encoder; - int i; - - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - if (connector->encoder_ids[i] == 0) - break; - - obj = drm_mode_object_find(connector->dev, - connector->encoder_ids[i], - DRM_MODE_OBJECT_ENCODER); - if (!obj) - continue; + return &intel_attached_encoder(connector)->base; +} - encoder = obj_to_encoder(obj); - return encoder; - } - return NULL; +void intel_connector_attach_encoder(struct intel_connector *connector, + struct intel_encoder *encoder) +{ + connector->encoder = encoder; + drm_mode_connector_attach_encoder(&connector->base, + &encoder->base); } /* |