diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 104 |
1 files changed, 88 insertions, 16 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bee24b1a58e..fca523288ac 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2120,9 +2120,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); + TRANS_DP_SYNC_MASK | + TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); + temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; @@ -2712,27 +2714,19 @@ fdi_reduce_ratio(u32 *num, u32 *den) } } -#define DATA_N 0x800000 -#define LINK_N 0x80000 - static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { - u64 temp; - m_n->tu = 64; /* default size */ - temp = (u64) DATA_N * pixel_clock; - temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); - m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ - m_n->gmch_n = DATA_N; + /* BUG_ON(pixel_clock > INT_MAX / 36); */ + m_n->gmch_m = bits_per_pixel * pixel_clock; + m_n->gmch_n = link_clock * nlanes * 8; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); - temp = (u64) LINK_N * pixel_clock; - m_n->link_m = div_u64(temp, link_clock); - m_n->link_n = LINK_N; + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } @@ -3716,6 +3710,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (HAS_PCH_SPLIT(dev)) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int lane = 0, link_bw, bpp; /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ @@ -3799,6 +3794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_crtc->fdi_lanes = lane; + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } @@ -5236,6 +5233,55 @@ static const struct drm_crtc_funcs intel_crtc_funcs = { .page_flip = intel_crtc_page_flip, }; +static void intel_sanitize_modesetting(struct drm_device *dev, + int pipe, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg, val; + + if (HAS_PCH_SPLIT(dev)) + return; + + /* Who knows what state these registers were left in by the BIOS or + * grub? + * + * If we leave the registers in a conflicting state (e.g. with the + * display plane reading from the other pipe than the one we intend + * to use) then when we attempt to teardown the active mode, we will + * not disable the pipes and planes in the correct order -- leaving + * a plane reading from a disabled pipe and possibly leading to + * undefined behaviour. + */ + + reg = DSPCNTR(plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) == 0) + return; + if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) + return; + + /* This display plane is active and attached to the other CPU pipe. */ + pipe = !pipe; + + /* Disable the plane and wait for it to stop reading from the pipe. */ + I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + + if (IS_GEN2(dev)) + intel_wait_for_vblank(dev, pipe); + + if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; + + /* Switch off the pipe. */ + reg = PIPECONF(pipe); + val = I915_READ(reg); + if (val & PIPECONF_ENABLE) { + I915_WRITE(reg, val & ~PIPECONF_ENABLE); + intel_wait_for_pipe_off(dev, pipe); + } +} static void intel_crtc_init(struct drm_device *dev, int pipe) { @@ -5287,6 +5333,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); + + intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, @@ -5331,19 +5379,41 @@ static int intel_encoder_clones(struct drm_device *dev, int type_mask) return index_mask; } +static bool has_edp_a(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!IS_MOBILE(dev)) + return false; + + if ((I915_READ(DP_A) & DP_DETECTED) == 0) + return false; + + if (IS_GEN5(dev) && + (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE)) + return false; + + return true; +} + static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; bool dpd_is_edp = false; + bool has_lvds = false; if (IS_MOBILE(dev) && !IS_I830(dev)) - intel_lvds_init(dev); + has_lvds = intel_lvds_init(dev); + if (!has_lvds && !HAS_PCH_SPLIT(dev)) { + /* disable the panel fitter on everything but LVDS */ + I915_WRITE(PFIT_CONTROL, 0); + } if (HAS_PCH_SPLIT(dev)) { dpd_is_edp = intel_dpd_is_edp(dev); - if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED)) + if (has_edp_a(dev)) intel_dp_init(dev, DP_A); if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) @@ -5772,6 +5842,8 @@ void intel_init_clock_gating(struct drm_device *dev) I915_WRITE(PCH_3DCGDIS0, MARIUNIT_CLOCK_GATE_DISABLE | SVSMUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(PCH_3DCGDIS1, + VFMUNIT_CLOCK_GATE_DISABLE); } I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); |