diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 33 |
1 files changed, 24 insertions, 9 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 981b1f1c04d..e77a863a383 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); @@ -4711,7 +4712,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, lvds_bpc = 6; if (lvds_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); display_bpc = lvds_bpc; } continue; @@ -4722,7 +4723,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, unsigned int edp_bpc = dev_priv->edp.bpp / 3; if (edp_bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } continue; @@ -4737,7 +4738,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Don't use an invalid EDID bpc value */ if (connector->display_info.bpc && connector->display_info.bpc < display_bpc) { - DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); display_bpc = connector->display_info.bpc; } } @@ -4748,10 +4749,10 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, */ if (intel_encoder->type == INTEL_OUTPUT_HDMI) { if (display_bpc > 8 && display_bpc < 12) { - DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n"); display_bpc = 12; } else { - DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n"); display_bpc = 8; } } @@ -4789,8 +4790,8 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, display_bpc = min(display_bpc, bpc); - DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", - bpc, display_bpc); + DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); *pipe_bpp = display_bpc * 3; @@ -5671,7 +5672,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; - pipeconf |= PIPECONF_DITHER_TYPE_ST1; + pipeconf |= PIPECONF_DITHER_TYPE_SP; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); @@ -8148,6 +8149,20 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock + * gating disable must be set. Failure to set it results in + * flickering pixels due to Z write ordering failures after + * some amount of runtime in the Mesa "fire" demo, and Unigine + * Sanctuary and Tropics, and apparently anything else with + * alpha test or pixel discard. + * + * According to the spec, bit 11 (RCCUNIT) must also be set, + * but we didn't debug actual testcases to find it out. + */ + I915_WRITE(GEN6_UCGCTL2, + GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | + GEN6_RCCUNIT_CLOCK_GATE_DISABLE); + /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: |