diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 1618 |
1 files changed, 1618 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c new file mode 100644 index 00000000000..e5c1c80d1f9 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_display.c @@ -0,0 +1,1618 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +#include "drm_crtc_helper.h" + +bool intel_pipe_has_type (struct drm_crtc *crtc, int type); + +typedef struct { + /* given values */ + int n; + int m1, m2; + int p1, p2; + /* derived values */ + int dot; + int vco; + int m; + int p; +} intel_clock_t; + +typedef struct { + int min, max; +} intel_range_t; + +typedef struct { + int dot_limit; + int p2_slow, p2_fast; +} intel_p2_t; + +#define INTEL_P2_NUM 2 + +typedef struct { + intel_range_t dot, vco, n, m, m1, m2, p, p1; + intel_p2_t p2; +} intel_limit_t; + +#define I8XX_DOT_MIN 25000 +#define I8XX_DOT_MAX 350000 +#define I8XX_VCO_MIN 930000 +#define I8XX_VCO_MAX 1400000 +#define I8XX_N_MIN 3 +#define I8XX_N_MAX 16 +#define I8XX_M_MIN 96 +#define I8XX_M_MAX 140 +#define I8XX_M1_MIN 18 +#define I8XX_M1_MAX 26 +#define I8XX_M2_MIN 6 +#define I8XX_M2_MAX 16 +#define I8XX_P_MIN 4 +#define I8XX_P_MAX 128 +#define I8XX_P1_MIN 2 +#define I8XX_P1_MAX 33 +#define I8XX_P1_LVDS_MIN 1 +#define I8XX_P1_LVDS_MAX 6 +#define I8XX_P2_SLOW 4 +#define I8XX_P2_FAST 2 +#define I8XX_P2_LVDS_SLOW 14 +#define I8XX_P2_LVDS_FAST 14 /* No fast option */ +#define I8XX_P2_SLOW_LIMIT 165000 + +#define I9XX_DOT_MIN 20000 +#define I9XX_DOT_MAX 400000 +#define I9XX_VCO_MIN 1400000 +#define I9XX_VCO_MAX 2800000 +#define I9XX_N_MIN 3 +#define I9XX_N_MAX 8 +#define I9XX_M_MIN 70 +#define I9XX_M_MAX 120 +#define I9XX_M1_MIN 10 +#define I9XX_M1_MAX 20 +#define I9XX_M2_MIN 5 +#define I9XX_M2_MAX 9 +#define I9XX_P_SDVO_DAC_MIN 5 +#define I9XX_P_SDVO_DAC_MAX 80 +#define I9XX_P_LVDS_MIN 7 +#define I9XX_P_LVDS_MAX 98 +#define I9XX_P1_MIN 1 +#define I9XX_P1_MAX 8 +#define I9XX_P2_SDVO_DAC_SLOW 10 +#define I9XX_P2_SDVO_DAC_FAST 5 +#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 +#define I9XX_P2_LVDS_SLOW 14 +#define I9XX_P2_LVDS_FAST 7 +#define I9XX_P2_LVDS_SLOW_LIMIT 112000 + +#define INTEL_LIMIT_I8XX_DVO_DAC 0 +#define INTEL_LIMIT_I8XX_LVDS 1 +#define INTEL_LIMIT_I9XX_SDVO_DAC 2 +#define INTEL_LIMIT_I9XX_LVDS 3 + +static const intel_limit_t intel_limits[] = { + { /* INTEL_LIMIT_I8XX_DVO_DAC */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, + }, + { /* INTEL_LIMIT_I8XX_LVDS */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, + }, + { /* INTEL_LIMIT_I9XX_SDVO_DAC */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, + .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + }, + { /* INTEL_LIMIT_I9XX_LVDS */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, + .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, + }, +}; + +static const intel_limit_t *intel_limit(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + const intel_limit_t *limit; + + if (IS_I9XX(dev)) { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + } else { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + } + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ + +static void i8xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ + +static void i9xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +static void intel_clock(struct drm_device *dev, int refclk, + intel_clock_t *clock) +{ + if (IS_I9XX(dev)) + i9xx_clock (refclk, clock); + else + i8xx_clock (refclk, clock); +} + +/** + * Returns whether any output on the specified pipe is of the specified type + */ +bool intel_pipe_has_type (struct drm_crtc *crtc, int type) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *l_entry; + + list_for_each_entry(l_entry, &mode_config->connector_list, head) { + if (l_entry->encoder && + l_entry->encoder->crtc == crtc) { + struct intel_output *intel_output = to_intel_output(l_entry); + if (intel_output->type == type) + return true; + } + } + return false; +} + +#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +/** + * Returns whether the given set of divisors are valid for a given refclk with + * the given connectors. + */ + +static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock) +{ + const intel_limit_t *limit = intel_limit (crtc); + + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + INTELPllInvalid ("p1 out of range\n"); + if (clock->p < limit->p.min || limit->p.max < clock->p) + INTELPllInvalid ("p out of range\n"); + if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) + INTELPllInvalid ("m2 out of range\n"); + if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) + INTELPllInvalid ("m1 out of range\n"); + if (clock->m1 <= clock->m2) + INTELPllInvalid ("m1 <= m2\n"); + if (clock->m < limit->m.min || limit->m.max < clock->m) + INTELPllInvalid ("m out of range\n"); + if (clock->n < limit->n.min || limit->n.max < clock->n) + INTELPllInvalid ("n out of range\n"); + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + INTELPllInvalid ("vco out of range\n"); + /* XXX: We may need to be checking "Dot clock" depending on the multiplier, + * connector, etc., rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + INTELPllInvalid ("dot out of range\n"); + + return true; +} + +/** + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. The returned values represent the clock equation: + * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. + */ +static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, + int refclk, intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + intel_clock_t clock; + const intel_limit_t *limit = intel_limit(crtc); + int err = target; + + if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + (I915_READ(LVDS) & LVDS_PORT_EN) != 0) { + /* + * For LVDS, if the panel is on, just rely on its current + * settings for dual-channel. We haven't figured out how to + * reliably set up different single/dual channel state, if we + * even can. + */ + if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset (best_clock, 0, sizeof (*best_clock)); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { + for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 && + clock.m2 <= limit->m2.max; clock.m2++) { + for (clock.n = limit->n.min; clock.n <= limit->n.max; + clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + int this_err; + + intel_clock(dev, refclk, &clock); + + if (!intel_PLL_is_valid(crtc, &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return (err != target); +} + +void +intel_wait_for_vblank(struct drm_device *dev) +{ + /* Wait for 20ms, i.e. one cycle at 50hz. */ + udelay(20000); +} + +static void +intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_master_private *master_priv; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_framebuffer *intel_fb; + struct drm_i915_gem_object *obj_priv; + struct drm_gem_object *obj; + int pipe = intel_crtc->pipe; + unsigned long Start, Offset; + int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR); + int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); + int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + u32 dspcntr, alignment; + + /* no fb bound */ + if (!crtc->fb) { + DRM_DEBUG("No FB bound\n"); + return; + } + + intel_fb = to_intel_framebuffer(crtc->fb); + obj = intel_fb->obj; + obj_priv = obj->driver_private; + + switch (obj_priv->tiling_mode) { + case I915_TILING_NONE: + alignment = 64 * 1024; + break; + case I915_TILING_X: + if (IS_I9XX(dev)) + alignment = 1024 * 1024; + else + alignment = 512 * 1024; + break; + case I915_TILING_Y: + /* FIXME: Is this true? */ + DRM_ERROR("Y tiled not allowed for scan out buffers\n"); + return; + default: + BUG(); + } + + if (i915_gem_object_pin(intel_fb->obj, alignment)) + return; + + i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); + + Start = obj_priv->gtt_offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + + I915_WRITE(dspstride, crtc->fb->pitch); + + dspcntr = I915_READ(dspcntr_reg); + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + DRM_ERROR("Unknown color depth\n"); + return; + } + I915_WRITE(dspcntr_reg, dspcntr); + + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + if (IS_I965G(dev)) { + I915_WRITE(dspbase, Offset); + I915_READ(dspbase); + I915_WRITE(dspsurf, Start); + I915_READ(dspsurf); + } else { + I915_WRITE(dspbase, Start + Offset); + I915_READ(dspbase); + } + + intel_wait_for_vblank(dev); + + if (old_fb) { + intel_fb = to_intel_framebuffer(old_fb); + i915_gem_object_unpin(intel_fb->obj); + } + + if (!dev->primary->master) + return; + + master_priv = dev->primary->master->driver_priv; + if (!master_priv->sarea_priv) + return; + + switch (pipe) { + case 0: + master_priv->sarea_priv->pipeA_x = x; + master_priv->sarea_priv->pipeA_y = y; + break; + case 1: + master_priv->sarea_priv->pipeB_x = x; + master_priv->sarea_priv->pipeB_y = y; + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + break; + } +} + + + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_master_private *master_priv; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + u32 temp; + bool enabled; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + /* Enable the DPLL */ + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(dpll_reg, temp); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the pipe */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) + I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + + /* Enable the plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, true); TODO + break; + case DRM_MODE_DPMS_OFF: + /* Give the overlay scaler a chance to disable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, FALSE); TODO + + /* Disable the VGA plane that we never use */ + I915_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable display plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_READ(dspbase_reg); + } + + if (!IS_I9XX(dev)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev); + } + + /* Next, disable display pipes */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + I915_READ(pipeconf_reg); + } + + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + + if (!dev->primary->master) + return; + + master_priv = dev->primary->master->driver_priv; + if (!master_priv->sarea_priv) + return; + + enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; + + switch (pipe) { + case 0: + master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; + master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; + break; + case 1: + master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; + master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + break; + } + + intel_crtc->dpms_mode = mode; +} + +static void intel_crtc_prepare (struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void intel_crtc_commit (struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); +} + +void intel_encoder_prepare (struct drm_encoder *encoder) +{ + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + /* lvds has its own version of prepare see intel_lvds_prepare */ + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); +} + +void intel_encoder_commit (struct drm_encoder *encoder) +{ + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + /* lvds has its own version of commit see intel_lvds_commit */ + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); +} + +static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + + +/** Returns the core display clock speed for i830 - i945 */ +static int intel_get_core_clock_speed(struct drm_device *dev) +{ + + /* Core clock values taken from the published datasheets. + * The 830 may go up to 166 Mhz, which we should check. + */ + if (IS_I945G(dev)) + return 400000; + else if (IS_I915G(dev)) + return 333000; + else if (IS_I945GM(dev) || IS_845G(dev)) + return 200000; + else if (IS_I915GM(dev)) { + u16 gcfgc = 0; + + pci_read_config_word(dev->pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) + return 133000; + else { + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_MHZ: + return 333000; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + return 190000; + } + } + } else if (IS_I865G(dev)) + return 266000; + else if (IS_I855(dev)) { + u16 hpllcc = 0; + /* Assume that the hardware is in the high speed state. This + * should be the default. + */ + switch (hpllcc & GC_CLOCK_CONTROL_MASK) { + case GC_CLOCK_133_200: + case GC_CLOCK_100_200: + return 200000; + case GC_CLOCK_166_250: + return 250000; + case GC_CLOCK_100_133: + return 133000; + } + } else /* 852, 830 */ + return 133000; + + return 0; /* Silence gcc warning */ +} + + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int intel_panel_fitter_pipe (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pfit_control; + + /* i830 doesn't have a panel fitter */ + if (IS_I830(dev)) + return -1; + + pfit_control = I915_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + + /* 965 can place panel fitter on either pipe */ + if (IS_I965G(dev)) + return (pfit_control >> 29) & 0x3; + + /* older chips can only use pipe 1 */ + return 1; +} + +static void intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int fp_reg = (pipe == 0) ? FPA0 : FPB0; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; + int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int refclk; + intel_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false, is_dvo = false; + bool is_crt = false, is_lvds = false, is_tv = false; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + drm_vblank_pre_modeset(dev, pipe); + + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + switch (intel_output->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = true; + break; + case INTEL_OUTPUT_DVO: + is_dvo = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = true; + break; + } + } + + if (IS_I9XX(dev)) { + refclk = 96000; + } else { + refclk = 48000; + } + + ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return; + } + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + + dpll = DPLL_VGA_MODE_DIS; + if (IS_I9XX(dev)) { + if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + dpll |= DPLL_DVO_HIGH_SPEED; + if (IS_I945G(dev) || IS_I945GM(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + } + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 1)) << 16; + switch (clock.p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + if (IS_I965G(dev)) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + } else { + if (is_lvds) { + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock.p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock.p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + } + + if (is_tv) { + /* XXX: just matching BIOS for now */ +/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + } + else + dpll |= PLL_REF_INPUT_DREFCLK; + + /* setup pipeconf */ + pipeconf = I915_READ(pipeconf_reg); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + if (pipe == 0 && !IS_I965G(dev)) { + /* Enable pixel doubling when the dot clock is > 90% of the (display) + * core speed. + * + * XXX: No double-wide on 915GM pipe B. Is that the only reason for the + * pipe == 0 check? + */ + if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10) + pipeconf |= PIPEACONF_DOUBLE_WIDE; + else + pipeconf &= ~PIPEACONF_DOUBLE_WIDE; + } + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + dpll |= DPLL_VCO_ENABLE; + + + /* Disable the panel fitter if it was on our pipe */ + if (intel_panel_fitter_pipe(dev) == pipe) + I915_WRITE(PFIT_CONTROL, 0); + + DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + drm_mode_debug_printmodeline(mode); + + + if (dpll & DPLL_VCO_ENABLE) { + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + udelay(150); + } + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + u32 lvds = I915_READ(LVDS); + + lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + + I915_WRITE(LVDS, lvds); + I915_READ(LVDS); + } + + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + if (IS_I965G(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | + ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); + } else { + /* write it again -- the BIOS does, after all */ + I915_WRITE(dpll_reg, dpll); + } + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + /* pipesrc and dspsize control the size that is scaled from, which should + * always be the user's requested size. + */ + I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + I915_WRITE(dsppos_reg, 0); + I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + I915_WRITE(pipeconf_reg, pipeconf); + I915_READ(pipeconf_reg); + + intel_wait_for_vblank(dev); + + I915_WRITE(dspcntr_reg, dspcntr); + + /* Flush the plane changes */ + intel_pipe_set_base(crtc, x, y, old_fb); + + drm_vblank_post_modeset(dev, pipe); +} + +/** Loads the palette/gamma unit for the CRTC with the prepared values */ +void intel_crtc_load_lut(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; + int i; + + /* The clocks have to be on to load the palette. */ + if (!crtc->enabled) + return; + + for (i = 0; i < 256; i++) { + I915_WRITE(palreg + 4 * i, + (intel_crtc->lut_r[i] << 16) | + (intel_crtc->lut_g[i] << 8) | + intel_crtc->lut_b[i]); + } +} + +static int intel_crtc_cursor_set(struct drm_crtc *crtc, + struct drm_file *file_priv, + uint32_t handle, + uint32_t width, uint32_t height) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_gem_object *bo; + struct drm_i915_gem_object *obj_priv; + int pipe = intel_crtc->pipe; + uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; + uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; + uint32_t temp; + size_t addr; + + DRM_DEBUG("\n"); + + /* if we want to turn off the cursor ignore width and height */ + if (!handle) { + DRM_DEBUG("cursor off\n"); + /* turn of the cursor */ + temp = 0; + temp |= CURSOR_MODE_DISABLE; + + I915_WRITE(control, temp); + I915_WRITE(base, 0); + return 0; + } + + /* Currently we only support 64x64 cursors */ + if (width != 64 || height != 64) { + DRM_ERROR("we currently only support 64x64 cursors\n"); + return -EINVAL; + } + + bo = drm_gem_object_lookup(dev, file_priv, handle); + if (!bo) + return -ENOENT; + + obj_priv = bo->driver_private; + + if (bo->size < width * height * 4) { + DRM_ERROR("buffer is to small\n"); + drm_gem_object_unreference(bo); + return -ENOMEM; + } + + if (dev_priv->cursor_needs_physical) { + addr = dev->agp->base + obj_priv->gtt_offset; + } else { + addr = obj_priv->gtt_offset; + } + + intel_crtc->cursor_addr = addr; + temp = 0; + /* set the pipe for the cursor */ + temp |= (pipe << 28); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + + I915_WRITE(control, temp); + I915_WRITE(base, addr); + + return 0; +} + +static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + uint32_t temp = 0; + uint32_t adder; + + if (x < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); + x = -x; + } + if (y < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); + y = -y; + } + + temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); + temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); + + adder = intel_crtc->cursor_addr; + I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); + I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); + + return 0; +} + +/** Sets the color ramps on behalf of RandR */ +void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, + u16 blue, int regno) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + intel_crtc->lut_r[regno] = red >> 8; + intel_crtc->lut_g[regno] = green >> 8; + intel_crtc->lut_b[regno] = blue >> 8; +} + +static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, uint32_t size) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int i; + + if (size != 256) + return; + + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = red[i] >> 8; + intel_crtc->lut_g[i] = green[i] >> 8; + intel_crtc->lut_b[i] = blue[i] >> 8; + } + + intel_crtc_load_lut(crtc); +} + +/** + * Get a pipe with a simple mode set on it for doing load-based monitor + * detection. + * + * It will be up to the load-detect code to adjust the pipe as appropriate for + * its requirements. The pipe will be connected to no other outputs. + * + * Currently this code will only succeed if there is a pipe with no outputs + * configured for it. In the future, it could choose to temporarily disable + * some outputs to free up a pipe for its use. + * + * \return crtc, or NULL if no pipes are available. + */ + +/* VESA 640x480x72Hz mode to set on the pipe */ +static struct drm_display_mode load_detect_mode = { + DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, + 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), +}; + +struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, + struct drm_display_mode *mode, + int *dpms_mode) +{ + struct intel_crtc *intel_crtc; + struct drm_crtc *possible_crtc; + struct drm_crtc *supported_crtc =NULL; + struct drm_encoder *encoder = &intel_output->enc; + struct drm_crtc *crtc = NULL; + struct drm_device *dev = encoder->dev; + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + struct drm_crtc_helper_funcs *crtc_funcs; |