aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/gma500/cdv_device.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/gma500/cdv_device.c')
-rw-r--r--drivers/gpu/drm/gma500/cdv_device.c351
1 files changed, 351 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
new file mode 100644
index 00000000000..4a5b099c3bc
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -0,0 +1,351 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "gma_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+#include "cdv_device.h"
+
+#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_DATA 0x3c5
+
+static void cdv_disable_vga(struct drm_device *dev)
+{
+ u8 sr1;
+ u32 vga_reg;
+
+ vga_reg = VGACNTRL;
+
+ outb(1, VGA_SR_INDEX);
+ sr1 = inb(VGA_SR_DATA);
+ outb(sr1 | 1<<5, VGA_SR_DATA);
+ udelay(300);
+
+ REG_WRITE(vga_reg, VGA_DISP_DISABLE);
+ REG_READ(vga_reg);
+}
+
+static int cdv_output_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ cdv_disable_vga(dev);
+
+ cdv_intel_crt_init(dev, &dev_priv->mode_dev);
+ cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
+
+ /* These bits indicate HDMI not SDVO on CDV, but we don't yet support
+ the HDMI interface */
+ if (REG_READ(SDVOB) & SDVO_DETECTED)
+ cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
+ if (REG_READ(SDVOC) & SDVO_DETECTED)
+ cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
+ return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ * Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR 10
+#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ 0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
+
+static int cdv_brightness;
+static struct backlight_device *cdv_backlight_device;
+
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+ /* return locally cached var instead of HW read (due to DPST etc.) */
+ /* FIXME: ideally return actual value in case firmware fiddled with
+ it */
+ return cdv_brightness;
+}
+
+
+static int cdv_backlight_setup(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ unsigned long core_clock;
+ /* u32 bl_max_freq; */
+ /* unsigned long value; */
+ u16 bl_max_freq;
+ uint32_t value;
+ uint32_t blc_pwm_precision_factor;
+
+ /* get bl_max_freq and pol from dev_priv*/
+ if (!dev_priv->lvds_bl) {
+ dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+ return -ENOENT;
+ }
+ bl_max_freq = dev_priv->lvds_bl->freq;
+ blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+ core_clock = dev_priv->core_freq;
+
+ value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+ value *= blc_pwm_precision_factor;
+ value /= bl_max_freq;
+ value /= blc_pwm_precision_factor;
+
+ if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+ value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+ return -ERANGE;
+ else {
+ /* FIXME */
+ }
+ return 0;
+}
+
+static int cdv_set_brightness(struct backlight_device *bd)
+{
+ int level = bd->props.brightness;
+
+ /* Percentage 1-100% being valid */
+ if (level < 1)
+ level = 1;
+
+ /*cdv_intel_lvds_set_brightness(dev, level); FIXME */
+ cdv_brightness = level;
+ return 0;
+}
+
+static const struct backlight_ops cdv_ops = {
+ .get_brightness = cdv_get_brightness,
+ .update_status = cdv_set_brightness,
+};
+
+static int cdv_backlight_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int ret;
+ struct backlight_properties props;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 100;
+ props.type = BACKLIGHT_PLATFORM;
+
+ cdv_backlight_device = backlight_device_register("psb-bl",
+ NULL, (void *)dev, &cdv_ops, &props);
+ if (IS_ERR(cdv_backlight_device))
+ return PTR_ERR(cdv_backlight_device);
+
+ ret = cdv_backlight_setup(dev);
+ if (ret < 0) {
+ backlight_device_unregister(cdv_backlight_device);
+ cdv_backlight_device = NULL;
+ return ret;
+ }
+ cdv_backlight_device->props.brightness = 100;
+ cdv_backlight_device->props.max_brightness = 100;
+ backlight_update_status(cdv_backlight_device);
+ dev_priv->backlight_device = cdv_backlight_device;
+ return 0;
+}
+
+#endif
+
+/*
+ * Provide the Cedarview specific chip logic and low level methods
+ * for power management
+ *
+ * FIXME: we need to implement the apm/ospm base management bits
+ * for this and the MID devices.
+ */
+
+static inline u32 CDV_MSG_READ32(uint port, uint offset)
+{
+ int mcr = (0x10<<24) | (port << 16) | (offset << 8);
+ uint32_t ret_val = 0;
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ pci_write_config_dword(pci_root, 0xD0, mcr);
+ pci_read_config_dword(pci_root, 0xD4, &ret_val);
+ pci_dev_put(pci_root);
+ return ret_val;
+}
+
+static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+ int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ pci_write_config_dword(pci_root, 0xD4, value);
+ pci_write_config_dword(pci_root, 0xD0, mcr);
+ pci_dev_put(pci_root);
+}
+
+#define PSB_APM_CMD 0x0
+#define PSB_APM_STS 0x04
+#define PSB_PM_SSC 0x20
+#define PSB_PM_SSS 0x30
+#define PSB_PWRGT_GFX_MASK 0x3
+#define CDV_PWRGT_DISPLAY_CNTR 0x000fc00c
+#define CDV_PWRGT_DISPLAY_STS 0x000fc00c
+
+static void cdv_init_pm(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 pwr_cnt;
+ int i;
+
+ dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+ PSB_APMBA) & 0xFFFF;
+ dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+ PSB_OSPMBA) & 0xFFFF;
+
+ /* Force power on for now */
+ pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
+ pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
+
+ outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
+ for (i = 0; i < 5; i++) {
+ u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
+ if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
+ break;
+ udelay(10);
+ }
+ pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+ pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
+ outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
+ for (i = 0; i < 5; i++) {
+ u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+ if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
+ break;
+ udelay(10);
+ }
+}
+
+/**
+ * cdv_save_display_registers - save registers lost on suspend
+ * @dev: our DRM device
+ *
+ * Save the state we need in order to be able to restore the interface
+ * upon resume from suspend
+ *
+ * FIXME: review
+ */
+static int cdv_save_display_registers(struct drm_device *dev)
+{
+ return 0;
+}
+
+/**
+ * cdv_restore_display_registers - restore lost register state
+ * @dev: our DRM device
+ *
+ * Restore register state that was lost during suspend and resume.
+ *
+ * FIXME: review
+ */
+static int cdv_restore_display_registers(struct drm_device *dev)
+{
+ return 0;
+}
+
+static int cdv_power_down(struct drm_device *dev)
+{
+ return 0;
+}
+
+static int cdv_power_up(struct drm_device *dev)
+{
+ return 0;
+}
+
+/* FIXME ? - shared with Poulsbo */
+static void cdv_get_core_freq(struct drm_device *dev)
+{
+ uint32_t clock;
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+ pci_read_config_dword(pci_root, 0xD4, &clock);
+ pci_dev_put(pci_root);
+
+ switch (clock & 0x07) {
+ case 0:
+ dev_priv->core_freq = 100;
+ break;
+ case 1:
+ dev_priv->core_freq = 133;
+ break;
+ case 2:
+ dev_priv->core_freq = 150;
+ break;
+ case 3:
+ dev_priv->core_freq = 178;
+ break;
+ case 4:
+ dev_priv->core_freq = 200;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ dev_priv->core_freq = 266;
+ default:
+ dev_priv->core_freq = 0;
+ }
+}
+
+static int cdv_chip_setup(struct drm_device *dev)
+{
+ cdv_get_core_freq(dev);
+ gma_intel_opregion_init(dev);
+ psb_intel_init_bios(dev);
+ return 0;
+}
+
+/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
+
+const struct psb_ops cdv_chip_ops = {
+ .name = "GMA3600/3650",
+ .accel_2d = 0,
+ .pipes = 2,
+ .crtcs = 2,
+ .sgx_offset = MRST_SGX_OFFSET,
+ .chip_setup = cdv_chip_setup,
+
+ .crtc_helper = &cdv_intel_helper_funcs,
+ .crtc_funcs = &cdv_intel_crtc_funcs,
+
+ .output_init = cdv_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+ .backlight_init = cdv_backlight_init,
+#endif
+
+ .init_pm = cdv_init_pm,
+ .save_regs = cdv_save_display_registers,
+ .restore_regs = cdv_restore_display_registers,
+ .power_down = cdv_power_down,
+ .power_up = cdv_power_up,
+};