4 files changed, 35 insertions, 40 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 48f49d93d24..3d2565441b3 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,7 +95,7 @@ config GPIO_MAX732X
 	  number for these GPIOs.
 
 config GPIO_PCA953X
-	tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
+	tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
 	depends on I2C
 	help
 	  Say yes here to provide access to several register-oriented
@@ -104,9 +104,10 @@ config GPIO_PCA953X
 
 	  4 bits:	pca9536, pca9537
 
-	  8 bits:	max7310, pca9534, pca9538, pca9554, pca9557
+	  8 bits:	max7310, pca9534, pca9538, pca9554, pca9557,
+	  		tca6408
 
-	  16 bits:	pca9535, pca9539, pca9555
+	  16 bits:	pca9535, pca9539, pca9555, tca6416
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called pca953x.
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 82020abc329..35e7aea4222 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1213,7 +1213,7 @@ static int gpiolib_show(struct seq_file *s, void *unused)
 		if (dev)
 			seq_printf(s, ", %s/%s",
 				dev->bus ? dev->bus->name : "no-bus",
-				dev->bus_id);
+				dev_name(dev));
 		if (chip->label)
 			seq_printf(s, ", %s", chip->label);
 		if (chip->can_sleep)
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 9ceeb89f132..37f35388a2a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -33,7 +33,12 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "pca9554", 8, },
 	{ "pca9555", 16, },
 	{ "pca9557", 8, },
+
 	{ "max7310", 8, },
+	{ "pca6107", 8, },
+	{ "tca6408", 8, },
+	{ "tca6416", 16, },
+	/* NYET:  { "tca6424", 24, }, */
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pca953x_id);
@@ -47,9 +52,6 @@ struct pca953x_chip {
 	struct gpio_chip gpio_chip;
 };
 
-/* NOTE:  we can't currently rely on fault codes to come from SMBus
- * calls, so we map all errors to EIO here and return zero otherwise.
- */
 static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
 {
 	int ret;
@@ -61,7 +63,7 @@ static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
 
 	if (ret < 0) {
 		dev_err(&chip->client->dev, "failed writing register\n");
-		return -EIO;
+		return ret;
 	}
 
 	return 0;
@@ -78,7 +80,7 @@ static int pca953x_read_reg(struct pca953x_chip *chip, int reg, uint16_t *val)
 
 	if (ret < 0) {
 		dev_err(&chip->client->dev, "failed reading register\n");
-		return -EIO;
+		return ret;
 	}
 
 	*val = (uint16_t)ret;
diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
index 37d3eec8730..afad1479214 100644
--- a/drivers/gpio/twl4030-gpio.c
+++ b/drivers/gpio/twl4030-gpio.c
@@ -202,37 +202,6 @@ static int twl4030_get_gpio_datain(int gpio)
 	return ret;
 }
 
-/*
- * Configure debounce timing value for a GPIO pin on TWL4030
- */
-int twl4030_set_gpio_debounce(int gpio, int enable)
-{
-	u8 d_bnk = gpio >> 3;
-	u8 d_msk = BIT(gpio & 0x7);
-	u8 reg = 0;
-	u8 base = 0;
-	int ret = 0;
-
-	if (unlikely((gpio >= TWL4030_GPIO_MAX)
-		|| !(gpio_usage_count & BIT(gpio))))
-		return -EPERM;
-
-	base = REG_GPIO_DEBEN1 + d_bnk;
-	mutex_lock(&gpio_lock);
-	ret = gpio_twl4030_read(base);
-	if (ret >= 0) {
-		if (enable)
-			reg = ret | d_msk;
-		else
-			reg = ret & ~d_msk;
-
-		ret = gpio_twl4030_write(base, reg);
-	}
-	mutex_unlock(&gpio_lock);
-	return ret;
-}
-EXPORT_SYMBOL(twl4030_set_gpio_debounce);
-
 /*----------------------------------------------------------------------*/
 
 static int twl_request(struct gpio_chip *chip, unsigned offset)
@@ -405,6 +374,23 @@ static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
 				REG_GPIOPUPDCTR1, 5);
 }
 
+static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
+{
+	u8		message[4];
+
+	/* 30 msec of debouncing is always used for MMC card detect,
+	 * and is optional for everything else.
+	 */
+	message[1] = (debounce & 0xff) | (mmc_cd & 0x03);
+	debounce >>= 8;
+	message[2] = (debounce & 0xff);
+	debounce >>= 8;
+	message[3] = (debounce & 0x03);
+
+	return twl4030_i2c_write(TWL4030_MODULE_GPIO, message,
+				REG_GPIO_DEBEN1, 3);
+}
+
 static int gpio_twl4030_remove(struct platform_device *pdev);
 
 static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
@@ -439,6 +425,12 @@ no_irqs:
 				pdata->pullups, pdata->pulldowns,
 				ret);
 
+	ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+	if (ret)
+		dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+				pdata->debounce, pdata->mmc_cd,
+				ret);
+
 	twl_gpiochip.base = pdata->gpio_base;
 	twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
 	twl_gpiochip.dev = &pdev->dev;