diff options
Diffstat (limited to 'drivers/edac')
| -rw-r--r-- | drivers/edac/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/edac/Makefile | 1 | ||||
| -rw-r--r-- | drivers/edac/amd64_edac.c | 1466 | ||||
| -rw-r--r-- | drivers/edac/amd64_edac.h | 369 | ||||
| -rw-r--r-- | drivers/edac/amd64_edac_inj.c | 8 | ||||
| -rw-r--r-- | drivers/edac/cpc925_edac.c | 2 | ||||
| -rw-r--r-- | drivers/edac/edac_core.h | 8 | ||||
| -rw-r--r-- | drivers/edac/edac_device.c | 4 | ||||
| -rw-r--r-- | drivers/edac/edac_device_sysfs.c | 4 | ||||
| -rw-r--r-- | drivers/edac/edac_mc.c | 2 | ||||
| -rw-r--r-- | drivers/edac/edac_mc_sysfs.c | 28 | ||||
| -rw-r--r-- | drivers/edac/edac_pci_sysfs.c | 4 | ||||
| -rw-r--r-- | drivers/edac/i5000_edac.c | 2 | ||||
| -rw-r--r-- | drivers/edac/i5100_edac.c | 2 | ||||
| -rw-r--r-- | drivers/edac/i5400_edac.c | 4 | ||||
| -rw-r--r-- | drivers/edac/i7300_edac.c | 4 | ||||
| -rw-r--r-- | drivers/edac/i7core_edac.c | 2 | ||||
| -rw-r--r-- | drivers/edac/i82443bxgx_edac.c | 4 | ||||
| -rw-r--r-- | drivers/edac/i82975x_edac.c | 69 | ||||
| -rw-r--r-- | drivers/edac/mce_amd.c | 8 | ||||
| -rw-r--r-- | drivers/edac/mce_amd.h | 28 | ||||
| -rw-r--r-- | drivers/edac/mce_amd_inj.c | 2 | ||||
| -rw-r--r-- | drivers/edac/mpc85xx_edac.c | 54 | ||||
| -rw-r--r-- | drivers/edac/ppc4xx_edac.c | 23 | ||||
| -rw-r--r-- | drivers/edac/r82600_edac.c | 6 | ||||
| -rw-r--r-- | drivers/edac/tile_edac.c | 254 |
26 files changed, 1219 insertions, 1151 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index fe70a341bd8..af1a17d42bd 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -7,7 +7,7 @@ menuconfig EDAC bool "EDAC (Error Detection And Correction) reporting" depends on HAS_IOMEM - depends on X86 || PPC + depends on X86 || PPC || TILE help EDAC is designed to report errors in the core system. These are low-level errors that are reported in the CPU or @@ -45,7 +45,7 @@ config EDAC_DECODE_MCE default y ---help--- Enable this option if you want to decode Machine Check Exceptions - occuring on your machine in human-readable form. + occurring on your machine in human-readable form. You should definitely say Y here in case you want to decode MCEs which occur really early upon boot, before the module infrastructure @@ -282,4 +282,12 @@ config EDAC_CPC925 a companion chip to the PowerPC 970 family of processors. +config EDAC_TILE + tristate "Tilera Memory Controller" + depends on EDAC_MM_EDAC && TILE + default y + help + Support for error detection and correction on the + Tilera memory controller. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index ba2898b3639..3e239133e29 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o +obj-$(CONFIG_EDAC_TILE) += tile_edac.o diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 4a5ecc58025..31e71c4fc83 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -25,59 +25,12 @@ static struct mem_ctl_info **mcis; static struct ecc_settings **ecc_stngs; /* - * Address to DRAM bank mapping: see F2x80 for K8 and F2x[1,0]80 for Fam10 and - * later. - */ -static int ddr2_dbam_revCG[] = { - [0] = 32, - [1] = 64, - [2] = 128, - [3] = 256, - [4] = 512, - [5] = 1024, - [6] = 2048, -}; - -static int ddr2_dbam_revD[] = { - [0] = 32, - [1] = 64, - [2 ... 3] = 128, - [4] = 256, - [5] = 512, - [6] = 256, - [7] = 512, - [8 ... 9] = 1024, - [10] = 2048, -}; - -static int ddr2_dbam[] = { [0] = 128, - [1] = 256, - [2 ... 4] = 512, - [5 ... 6] = 1024, - [7 ... 8] = 2048, - [9 ... 10] = 4096, - [11] = 8192, -}; - -static int ddr3_dbam[] = { [0] = -1, - [1] = 256, - [2] = 512, - [3 ... 4] = -1, - [5 ... 6] = 1024, - [7 ... 8] = 2048, - [9 ... 10] = 4096, - [11] = 8192, -}; - -/* * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching- * or higher value'. * *FIXME: Produce a better mapping/linearisation. */ - - struct scrubrate { u32 scrubval; /* bit pattern for scrub rate */ u32 bandwidth; /* bandwidth consumed (bytes/sec) */ @@ -107,6 +60,79 @@ struct scrubrate { { 0x00, 0UL}, /* scrubbing off */ }; +static int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 *val, const char *func) +{ + int err = 0; + + err = pci_read_config_dword(pdev, offset, val); + if (err) + amd64_warn("%s: error reading F%dx%03x.\n", + func, PCI_FUNC(pdev->devfn), offset); + + return err; +} + +int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 val, const char *func) +{ + int err = 0; + + err = pci_write_config_dword(pdev, offset, val); + if (err) + amd64_warn("%s: error writing to F%dx%03x.\n", + func, PCI_FUNC(pdev->devfn), offset); + + return err; +} + +/* + * + * Depending on the family, F2 DCT reads need special handling: + * + * K8: has a single DCT only + * + * F10h: each DCT has its own set of regs + * DCT0 -> F2x040.. + * DCT1 -> F2x140.. + * + * F15h: we select which DCT we access using F1x10C[DctCfgSel] + * + */ +static int k8_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val, + const char *func) +{ + if (addr >= 0x100) + return -EINVAL; + + return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func); +} + +static int f10_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val, + const char *func) +{ + return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func); +} + +static int f15_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val, + const char *func) +{ + u32 reg = 0; + u8 dct = 0; + + if (addr >= 0x140 && addr <= 0x1a0) { + dct = 1; + addr -= 0x100; + } + + amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, ®); + reg &= 0xfffffffe; + reg |= dct; + amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg); + + return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func); +} + /* * Memory scrubber control interface. For K8, memory scrubbing is handled by * hardware and can involve L2 cache, dcache as well as the main memory. With @@ -156,7 +182,7 @@ static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate) scrubval = scrubrates[i].scrubval; - pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F); + pci_write_bits32(ctl, SCRCTRL, scrubval, 0x001F); if (scrubval) return scrubrates[i].bandwidth; @@ -167,8 +193,12 @@ static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate) static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw) { struct amd64_pvt *pvt = mci->pvt_info; + u32 min_scrubrate = 0x5; - return __amd64_set_scrub_rate(pvt->F3, bw, pvt->min_scrubrate); + if (boot_cpu_data.x86 == 0xf) + min_scrubrate = 0x0; + + return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate); } static int amd64_get_scrub_rate(struct mem_ctl_info *mci) @@ -177,7 +207,7 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci) u32 scrubval = 0; int i, retval = -EINVAL; - amd64_read_pci_cfg(pvt->F3, K8_SCRCTRL, &scrubval); + amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); scrubval = scrubval & 0x001F; @@ -192,63 +222,14 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci) return retval; } -/* Map from a CSROW entry to the mask entry that operates on it */ -static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow) -{ - if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) - return csrow; - else - return csrow >> 1; -} - -/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */ -static u32 amd64_get_dct_base(struct amd64_pvt *pvt, int dct, int csrow) -{ - if (dct == 0) - return pvt->dcsb0[csrow]; - else - return pvt->dcsb1[csrow]; -} - /* - * Return the 'mask' address the i'th CS entry. This function is needed because - * there number of DCSM registers on Rev E and prior vs Rev F and later is - * different. + * returns true if the SysAddr given by sys_addr matches the + * DRAM base/limit associated with node_id */ -static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow) +static bool amd64_base_limit_match(struct amd64_pvt *pvt, u64 sys_addr, + unsigned nid) { - if (dct == 0) - return pvt->dcsm0[amd64_map_to_dcs_mask(pvt, csrow)]; - else - return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)]; -} - - -/* - * In *base and *limit, pass back the full 40-bit base and limit physical - * addresses for the node given by node_id. This information is obtained from - * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The - * base and limit addresses are of type SysAddr, as defined at the start of - * section 3.4.4 (p. 70). They are the lowest and highest physical addresses - * in the address range they represent. - */ -static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id, - u64 *base, u64 *limit) -{ - *base = pvt->dram_base[node_id]; - *limit = pvt->dram_limit[node_id]; -} - -/* - * Return 1 if the SysAddr given by sys_addr matches the base/limit associated - * with node_id - */ -static int amd64_base_limit_match(struct amd64_pvt *pvt, - u64 sys_addr, int node_id) -{ - u64 base, limit, addr; - - amd64_get_base_and_limit(pvt, node_id, &base, &limit); + u64 addr; /* The K8 treats this as a 40-bit value. However, bits 63-40 will be * all ones if the most significant implemented address bit is 1. @@ -258,7 +239,8 @@ static int amd64_base_limit_match(struct amd64_pvt *pvt, */ addr = sys_addr & 0x000000ffffffffffull; - return (addr >= base) && (addr <= limit); + return ((addr >= get_dram_base(pvt, nid)) && + (addr <= get_dram_limit(pvt, nid))); } /* @@ -271,7 +253,7 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, u64 sys_addr) { struct amd64_pvt *pvt; - int node_id; + unsigned node_id; u32 intlv_en, bits; /* @@ -285,10 +267,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, * registers. Therefore we arbitrarily choose to read it from the * register for node 0. */ - intlv_en = pvt->dram_IntlvEn[0]; + intlv_en = dram_intlv_en(pvt, 0); if (intlv_en == 0) { - for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) { + for (node_id = 0; node_id < DRAM_RANGES; node_id++) { if (amd64_base_limit_match(pvt, sys_addr, node_id)) goto found; } @@ -305,10 +287,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, bits = (((u32) sys_addr) >> 12) & intlv_en; for (node_id = 0; ; ) { - if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits) + if ((dram_intlv_sel(pvt, node_id) & intlv_en) == bits) break; /* intlv_sel field matches */ - if (++node_id >= DRAM_REG_COUNT) + if (++node_id >= DRAM_RANGES) goto err_no_match; } @@ -321,7 +303,7 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, } found: - return edac_mc_find(node_id); + return edac_mc_find((int)node_id); err_no_match: debugf2("sys_addr 0x%lx doesn't match any node\n", @@ -331,37 +313,50 @@ err_no_match: } /* - * Extract the DRAM CS base address from selected csrow register. + * compute the CS base address of the @csrow on the DRAM controller @dct. + * For details see F2x[5C:40] in the processor's BKDG */ -static u64 base_from_dct_base(struct amd64_pvt *pvt, int csrow) +static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, + u64 *base, u64 *mask) { - return ((u64) (amd64_get_dct_base(pvt, 0, csrow) & pvt->dcsb_base)) << - pvt->dcs_shift; -} + u64 csbase, csmask, base_bits, mask_bits; + u8 addr_shift; -/* - * Extract the mask from the dcsb0[csrow] entry in a CPU revision-specific way. - */ -static u64 mask_from_dct_mask(struct amd64_pvt *pvt, int csrow) -{ - u64 dcsm_bits, other_bits; - u64 mask; - - /* Extract bits from DRAM CS Mask. */ - dcsm_bits = amd64_get_dct_mask(pvt, 0, csrow) & pvt->dcsm_mask; + if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) { + csbase = pvt->csels[dct].csbases[csrow]; + csmask = pvt->csels[dct].csmasks[csrow]; + base_bits = GENMASK(21, 31) | GENMASK(9, 15); + mask_bits = GENMASK(21, 29) | GENMASK(9, 15); + addr_shift = 4; + } else { + csbase = pvt->csels[dct].csbases[csrow]; + csmask = pvt->csels[dct].csmasks[csrow >> 1]; + addr_shift = 8; - other_bits = pvt->dcsm_mask; - other_bits = ~(other_bits << pvt->dcs_shift); + if (boot_cpu_data.x86 == 0x15) + base_bits = mask_bits = GENMASK(19,30) | GENMASK(5,13); + else + base_bits = mask_bits = GENMASK(19,28) | GENMASK(5,13); + } - /* - * The extracted bits from DCSM belong in the spaces represented by - * the cleared bits in other_bits. - */ - mask = (dcsm_bits << pvt->dcs_shift) | other_bits; + *base = (csbase & base_bits) << addr_shift; - return mask; + *mask = ~0ULL; + /* poke holes for the csmask */ + *mask &= ~(mask_bits << addr_shift); + /* OR them in */ + *mask |= (csmask & mask_bits) << addr_shift; } +#define for_each_chip_select(i, dct, pvt) \ + for (i = 0; i < pvt->csels[dct].b_cnt; i++) + +#define chip_select_base(i, dct, pvt) \ + pvt->csels[dct].csbases[i] + +#define for_each_chip_select_mask(i, dct, pvt) \ + for (i = 0; i < pvt->csels[dct].m_cnt; i++) + /* * @input_addr is an InputAddr associated with the node given by mci. Return the * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr). @@ -374,19 +369,13 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) pvt = mci->pvt_info; - /* - * Here we use the DRAM CS Base and DRAM CS Mask registers. For each CS - * base/mask register pair, test the condition shown near the start of - * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E). - */ - for (csrow = 0; csrow < pvt->cs_count; csrow++) { - - /* This DRAM chip select is disabled on this node */ - if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0) + for_each_chip_select(csrow, 0, pvt) { + if (!csrow_enabled(csrow, 0, pvt)) continue; - base = base_from_dct_base(pvt, csrow); - mask = ~mask_from_dct_mask(pvt, csrow); + get_cs_base_and_mask(pvt, csrow, 0, &base, &mask); + + mask = ~mask; if ((input_addr & mask) == (base & mask)) { debugf2("InputAddr 0x%lx matches csrow %d (node %d)\n", @@ -396,7 +385,6 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) return csrow; } } - debugf2("no matching csrow for InputAddr 0x%lx (MC node %d)\n", (unsigned long)input_addr, pvt->mc_node_id); @@ -404,19 +392,6 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) } /* - * Return the base value defined by the DRAM Base register for the node - * represented by mci. This function returns the full 40-bit value despite the - * fact that the register only stores bits 39-24 of the value. See section - * 3.4.4.1 (BKDG #26094, K8, revA-E) - */ -static inline u64 get_dram_base(struct mem_ctl_info *mci) -{ - struct amd64_pvt *pvt = mci->pvt_info; - - return pvt->dram_base[pvt->mc_node_id]; -} - -/* * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094) * for the node represented by mci. Info is passed back in *hole_base, * *hole_offset, and *hole_size. Function returns 0 if info is valid or 1 if @@ -445,14 +420,13 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, return 1; } - /* only valid for Fam10h */ - if (boot_cpu_data.x86 == 0x10 && - (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) { + /* valid for Fam10h and above */ + if (boot_cpu_data.x86 >= 0x10 && !dhar_mem_hoist_valid(pvt)) { debugf1(" Dram Memory Hoisting is DISABLED on this system\n"); return 1; } - if ((pvt->dhar & DHAR_VALID) == 0) { + if (!dhar_valid(pvt)) { debugf1(" Dram Memory Hoisting is DISABLED on this node %d\n", pvt->mc_node_id); return 1; @@ -476,15 +450,15 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, * addresses in the hole so that they start at 0x100000000. */ - base = dhar_base(pvt->dhar); + base = dhar_base(pvt); *hole_base = base; *hole_size = (0x1ull << 32) - base; if (boot_cpu_data.x86 > 0xf) - *hole_offset = f10_dhar_offset(pvt->dhar); + *hole_offset = f10_dhar_offset(pvt); else - *hole_offset = k8_dhar_offset(pvt->dhar); + *hole_offset = k8_dhar_offset(pvt); debugf1(" DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n", pvt->mc_node_id, (unsigned long)*hole_base, @@ -525,10 +499,11 @@ EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info); */ static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr) { + struct amd64_pvt *pvt = mci->pvt_info; u64 dram_base, hole_base, hole_offset, hole_size, dram_addr; int ret = 0; - dram_base = get_dram_base(mci); + dram_base = get_dram_base(pvt, pvt->mc_node_id); ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size); @@ -556,7 +531,7 @@ static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr) * section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture * Programmer's Manual Volume 1 Application Programming. */ - dram_addr = (sys_addr & 0xffffffffffull) - dram_base; + dram_addr = (sys_addr & GENMASK(0, 39)) - dram_base; debugf2("using DRAM Base register to translate SysAddr 0x%lx to " "DramAddr 0x%lx\n", (unsigned long)sys_addr, @@ -592,9 +567,9 @@ static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr) * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) * concerning translating a DramAddr to an InputAddr. */ - intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); - input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) + - (dram_addr & 0xfff); + intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0)); + input_addr = ((dram_addr >> intlv_shift) & GENMASK(12, 35)) + + (dram_addr & 0xfff); debugf2(" Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n", intlv_shift, (unsigned long)dram_addr, @@ -628,7 +603,7 @@ static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr) static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) { struct amd64_pvt *pvt; - int node_id, intlv_shift; + unsigned node_id, intlv_shift; u64 bits, dram_addr; u32 intlv_sel; @@ -642,10 +617,10 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) */ pvt = mci->pvt_info; node_id = pvt->mc_node_id; - BUG_ON((node_id < 0) || (node_id > 7)); - intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); + BUG_ON(node_id > 7); + intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0)); if (intlv_shift == 0) { debugf1(" InputAddr 0x%lx translates to DramAddr of " "same value\n", (unsigned long)input_addr); @@ -653,10 +628,10 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) return input_addr; } - bits = ((input_addr & 0xffffff000ull) << intlv_shift) + - (input_addr & 0xfff); + bits = ((input_addr & GENMASK(12, 35)) << intlv_shift) + + (input_addr & 0xfff); - intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1); + intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1); dram_addr = bits + (intlv_sel << 12); debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx " @@ -673,7 +648,7 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) { struct amd64_pvt *pvt = mci->pvt_info; - u64 hole_base, hole_offset, hole_size, base, limit, sys_addr; + u64 hole_base, hole_offset, hole_size, base, sys_addr; int ret = 0; ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, @@ -691,7 +666,7 @@ static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) } } - amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit); + base = get_dram_base(pvt, pvt->mc_node_id); sys_addr = dram_addr + base; /* @@ -736,13 +711,12 @@ static void find_csrow_limits(struct mem_ctl_info *mci, int csrow, u64 base, mask; pvt = mci->pvt_info; - BUG_ON((csrow < 0) || (csrow >= pvt->cs_count)); + BUG_ON((csrow < 0) || (csrow >= pvt->csels[0].b_cnt)); - base = base_from_dct_base(pvt, csrow); - mask = mask_from_dct_mask(pvt, csrow); + get_cs_base_and_mask(pvt, csrow, 0, &base, &mask); *input_addr_min = base & ~mask; - *input_addr_max = base | mask | pvt->dcs_mask_notused; + *input_addr_max = base | mask; } /* Map the Error address to a PAGE and PAGE OFFSET. */ @@ -775,18 +749,13 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr) static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16); -static u16 extract_syndrome(struct err_regs *err) -{ - return ((err->nbsh >> 15) & 0xff) | ((err->nbsl >> 16) & 0xff00); -} - /* * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs * are ECC capable. */ static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) { - int bit; + u8 bit; enum dev_type edac_cap = EDAC_FLAG_NONE; bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= K8_REV_F) @@ -799,8 +768,7 @@ static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) return edac_cap; } - -static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt); +static void amd64_debug_display_dimm_sizes(struct amd64_pvt *, u8); static void amd64_dump_dramcfg_low(u32 dclr, int chan) { @@ -813,8 +781,9 @@ static void amd64_dump_dramcfg_low(u32 dclr, int chan) debugf1(" PAR/ERR parity: %s\n", (dclr & BIT(8)) ? "enabled" : "disabled"); - debugf1(" DCT 128bit mode width: %s\n", - (dclr & BIT(11)) ? "128b" : "64b"); + if (boot_cpu_data.x86 == 0x10) + debugf1(" DCT 128bit mode width: %s\n", + (dclr & BIT(11)) ? "128b" : "64b"); debugf1(" x4 logical DIMMs present: L0: %s L1: %s L2: %s L3: %s\n", (dclr & BIT(12)) ? "yes" : "no", @@ -824,18 +793,16 @@ static void amd64_dump_dramcfg_low(u32 dclr, int chan) } /* Display and decode various NB registers for debug purposes. */ -static void amd64_dump_misc_regs(struct amd64_pvt *pvt) +static void dump_misc_regs(struct amd64_pvt *pvt) { - int ganged; - debugf1("F3xE8 (NB Cap): 0x%08x\n", pvt->nbcap); debugf1(" NB two channel DRAM capable: %s\n", - (pvt->nbcap & K8_NBCAP_DCT_DUAL) ? "yes" : "no"); + (pvt->nbcap & NBCAP_DCT_DUAL) ? "yes" : "no"); debugf1(" ECC capable: %s, ChipKill ECC capable: %s\n", - (pvt->nbcap & K8_NBCAP_SECDED) ? "yes" : "no", - (pvt->nbcap & K8_NBCAP_CHIPKILL) ? "yes" : "no"); + (pvt->nbcap & NBCAP_SECDED) ? "yes" : "no", + (pvt->nbcap & NBCAP_CHIPKILL) ? "yes" : "no"); amd64_dump_dramcfg_low(pvt->dclr0, 0); @@ -843,139 +810,84 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt) debugf1("F1xF0 (DRAM Hole Address): 0x%08x, base: 0x%08x, " "offset: 0x%08x\n", - pvt->dhar, - dhar_base(pvt->dhar), - (boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt->dhar) - : f10_dhar_offset(pvt->dhar)); + pvt->dhar, dhar_base(pvt), + (boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt) + : f10_dhar_offset(pvt)); + + debugf1(" DramHoleValid: %s\n", dhar_valid(pvt) ? "yes" : "no"); - debugf1(" DramHoleValid: %s\n", - (pvt->dhar & DHAR_VALID) ? "yes" : "no"); + amd64_debug_display_dimm_sizes(pvt, 0); /* everything below this point is Fam10h and above */ - if (boot_cpu_data.x86 == 0xf) { - amd64_debug_display_dimm_sizes(0, pvt); + if (boot_cpu_data.x86 == 0xf) return; - } - amd64_info("using %s syndromes.\n", ((pvt->syn_type == 8) ? "x8" : "x4")); + amd64_debug_display_dimm_sizes(pvt, 1); + + amd64_info("using %s syndromes.\n", ((pvt->ecc_sym_sz == 8) ? "x8" : "x4")); /* Only if NOT ganged does dclr1 have valid info */ if (!dct_ganging_enabled(pvt)) amd64_dump_dramcfg_low(pvt->dclr1, 1); - - /* - * Determine if ganged and then dump memory sizes for first controller, - * and if NOT ganged dump info for 2nd controller. - */ - ganged = dct_ganging_enabled(pvt); - - amd64_debug_display_dimm_sizes(0, pvt); - - if (!ganged) - amd64_debug_display_dimm_sizes(1, pvt); -} - -/* Read in both of DBAM registers */ -static void amd64_read_dbam_reg(struct amd64_pvt *pvt) -{ - amd64_read_pci_cfg(pvt->F2, DBAM0, &pvt->dbam0); - - if (boot_cpu_data.x86 >= 0x10) - amd64_read_pci_cfg(pvt->F2, DBAM1, &pvt->dbam1); } /* - * NOTE: CPU Revision Dependent code: Rev E and Rev F - * - * Set the DCSB and DCSM mask values depending on the CPU revision value. Also - * set the shift factor for the DCSB and DCSM values. - * - * ->dcs_mask_notused, RevE: - * - * To find the max InputAddr for the csrow, start with the base address and set - * all bits that are "don't care" bits in the test at the start of section - * 3.5.4 (p. 84). - * - * The "don't care" bits are all set bits in the mask and all bits in the gaps - * between bit ranges [35:25] and [19:13]. The value REV_E_DCS_NOTUSED_BITS - * represents bits [24:20] and [12:0], which are all bits in the above-mentioned - * gaps. - * - * ->dcs_mask_notused, RevF and later: - * - * To find the max InputAddr for the csrow, start with the base address and set - * all bits that are "don't care" bits in the test at the start of NPT section - * 4.5.4 (p. 87). - * - * The "don't care" bits are all set bits in the mask and all bits in the gaps - * between bit ranges [36:27] and [21:13]. - * - * The value REV_F_F1Xh_DCS_NOTUSED_BITS represents bits [26:22] and [12:0], - * which are all bits in the above-mentioned gaps. + * see BKDG, F2x[1,0][5C:40], F2[1,0][6C:60] */ -static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt) +static void prep_chip_selects(struct amd64_pvt *pvt) { - if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) { - pvt->dcsb_base = REV_E_DCSB_BASE_BITS; - pvt->dcsm_mask = REV_E_DCSM_MASK_BITS; - pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS; - pvt->dcs_shift = REV_E_DCS_SHIFT; - pvt->cs_count = 8; - pvt->num_dcsm = 8; + pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8; + pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8; } else { - pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS; - pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS; - pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS; - pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT; - pvt->cs_count = 8; - pvt->num_dcsm = 4; + pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8; + pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4; } } /* - * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask hw registers + * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask registers */ -static void amd64_read_dct_base_mask(struct amd64_pvt *pvt) +static void read_dct_base_mask(struct amd64_pvt *pvt) { - int cs, reg; + int cs; + + prep_chip_selects(pvt); - amd64_set_dct_base_and_mask(pvt); + for_each_chip_select(cs, 0, pvt) { + int reg0 = DCSB0 + (cs * 4); + int reg1 = DCSB1 + (cs * 4); + u32 *base0 = &pvt->csels[0].csbases[cs]; + u32 *base1 = &pvt->csels[1].csbases[cs]; - for (cs = 0; cs < pvt->cs_count; cs++) { - reg = K8_DCSB0 + (cs * 4); - if (!amd64_read_pci_cfg(pvt->F2, reg, &pvt->dcsb0[cs])) + if (!amd64_read_dct_pci_cfg(pvt, reg0, base0)) debugf0(" DCSB0[%d]=0x%08x reg: F2x%x\n", - cs, pvt->dcsb0[cs], reg); - - /* If DCT are NOT ganged, then read in DCT1's base */ - if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) { - reg = F10_DCSB1 + (cs * 4); - if (!amd64_read_pci_cfg(pvt->F2, reg, - &pvt->dcsb1[cs])) - debugf0(" DCSB1[%d]=0x%08x reg: F2x%x\n", - cs, pvt->dcsb1[cs], reg); - } else { - pvt->dcsb1[cs] = 0; - } + cs, *base0, reg0); + + if (boot_cpu_data.x86 == 0xf || dct_ganging_enabled(pvt)) + continue; + + if (!amd64_read_dct_pci_cfg(pvt, reg1, base1)) + debugf0(" DCSB1[%d]=0x%08x reg: F2x%x\n", + cs, *base1, reg1); } - for (cs = 0; cs < pvt->num_dcsm; cs++) { - reg = K8_DCSM0 + (cs * 4); - if (!amd64_read_pci_cfg(pvt->F2, reg, &pvt->dcsm0[cs])) + for_each_chip_select_mask(cs, 0, pvt) { + int reg0 = DCSM0 + (cs * 4); + int reg1 = DCSM1 + (cs * 4); + u32 *mask0 = &pvt->csels[0].csmasks[cs]; + u32 *mask1 = &pvt->csels[1].csmasks[cs]; + + if (!amd64_read_dct_pci_cfg(pvt, reg0, mask0)) debugf0(" DCSM0[%d]=0x%08x reg: F2x%x\n", - cs, pvt->dcsm0[cs], reg); - - /* If DCT are NOT ganged, then read in DCT1's mask */ - if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) { - reg = F10_DCSM1 + (cs * 4); - if (!amd64_read_pci_cfg(pvt->F2, reg, - &pvt->dcsm1[cs])) - debugf0(" DCSM1[%d]=0x%08x reg: F2x%x\n", - cs, pvt->dcsm1[cs], reg); - } else { - pvt->dcsm1[cs] = 0; - } + cs, *mask0, reg0); + + if (boot_cpu_data.x86 == 0xf || dct_ganging_enabled(pvt)) + continue; + + if (!amd64_read_dct_pci_cfg(pvt, reg1, mask1)) + debugf0(" DCSM1[%d]=0x%08x reg: F2x%x\n", + cs, *mask1, reg1); } } @@ -983,7 +895,10 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt, int cs) { enum mem_type type; - if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= K8_REV_F) { + /* F15h supports only DDR3 */ + if (boot_cpu_data.x86 >= 0x15) + type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3; + else if (boot_cpu_data.x86 == 0x10 || pvt->ext_model >= K8_REV_F) { if (pvt->dchr0 & DDR3_MODE) type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3; else @@ -997,26 +912,14 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt, int cs) return type; } -/* - * Read the DRAM Configuration Low register. It differs between CG, D & E revs - * and the later RevF memory controllers (DDR vs DDR2) - * - * Return: - * number of memory channels in operation - * Pass back: - * contents of the DCL0_LOW register - */ +/* Get the number of DCT channels the memory controller is using. */ static int k8_early_channel_count(struct amd64_pvt *pvt) { - int flag, err = 0; - - err = amd64_read_pci_cfg(pvt->F2, F10_DCLR_0, &pvt->dclr0); - if (err) - return err; + int flag; if (pvt->ext_model >= K8_REV_F) /* RevF (NPT) and later */ - flag = pvt->dclr0 & F10_WIDTH_128; + flag = pvt->dclr0 & WIDTH_128; else /* RevE and earlier */ flag = pvt->dclr0 & REVE_WIDTH_128; @@ -1027,55 +930,47 @@ static int k8_early_channel_count(struct amd64_pvt *pvt) return (flag) ? 2 : 1; } -/* extract the ERROR ADDRESS for the K8 CPUs */ -static u64 k8_get_error_address(struct mem_ctl_info *mci, - struct err_regs *info) +/* On F10h and later ErrAddr is MC4_ADDR[47:1] */ +static u64 get_error_address(struct mce *m) { - return (((u64) (info->nbeah & 0xff)) << 32) + - (info->nbeal & ~0x03); + u8 start_bit = 1; + u8 end_bit = 47; + + if (boot_cpu_data.x86 == 0xf) { + start_bit = 3; + end_bit = 39; + } + + return m->addr & GENMASK(start_bit, end_bit); } -/* - * Read the Base and Limit registers for K8 based Memory controllers; extract - * fields from the 'raw' reg into separate data fields - * - * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN - */ -static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram) +static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) { - u32 low; - u32 off = dram << 3; /* 8 bytes between DRAM entries */ + int off = range << 3; - amd64_read_pci_cfg(pvt->F1, K8_DRAM_BASE_LOW + off, &low); + amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo); + amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo); - /* Extract parts into separate data entries */ - pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8; - pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7; - pvt->dram_rw_en[dram] = (low & 0x3); + if (boot_cpu_data.x86 == 0xf) + return; - amd64_read_pci_cfg(pvt->F1, K8_DRAM_LIMIT_LOW + off, &low); + if (!dram_rw(pvt, range)) + return; - /* - * Extract parts into separate data entries. Limit is the HIGHEST memory - * location of the region, so lower 24 bits need to be all ones - */ - pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF; - pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7; - pvt->dram_DstNode[dram] = (low & 0x7); + amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi); + amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi); } -static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, - struct err_regs *err_info, u64 sys_addr) +static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr, + u16 syndrome) { struct mem_ctl_info *src_mci; + struct amd64_pvt *pvt = mci->pvt_info; int channel, csrow; u32 page, offset; - u16 syndrome; - - syndrome = extract_syndrome(err_info); /* CHIPKILL enabled */ - if (err_info->nbcfg & K8_NBCFG_CHIPKILL) { + if (pvt->nbcfg & NBCFG_CHIPKILL) { channel = get_channel_from_ecc_syndrome(mci, syndrome); if (channel < 0) { /* @@ -1124,18 +1019,41 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, } } -static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode) +static int ddr2_cs_size(unsigned i, bool dct_width) { - int *dbam_map; + unsigned shift = 0; - if (pvt->ext_model >= K8_REV_F) - dbam_map = ddr2_dbam; - else if (pvt->ext_model >= K8_REV_D) - dbam_map = ddr2_dbam_revD; + if (i <= 2) + shift = i; + else if (!(i & 0x1)) + shift = i >> 1; else - dbam_map = ddr2_dbam_revCG; + shift = (i + 1) >> 1; - return dbam_map[cs_mode]; + return 128 << (shift + !!dct_width); +} + +static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode) +{ + u32 dclr = dct ? pvt->dclr1 : pvt->dclr0; + + if (pvt->ext_model >= K8_REV_F) { + WARN_ON(cs_mode > 11); + return ddr2_cs_size(cs_mode, dclr & WIDTH_128); + } + else if (pvt->ext_model >= K8_REV_D) { + WARN_ON(cs_mode > 10); + + if (cs_mode == 3 || cs_mode == 8) + return 32 << (cs_mode - 1); + else + return 32 << cs_mode; + } + else { + WARN_ON(cs_mode > 6); + return 32 << cs_mode; + } } /* @@ -1146,17 +1064,13 @@ static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode) * Pass back: * contents of the DCL0_LOW register */ -static int f10_early_channel_count(struct amd64_pvt *pvt) +static int f1x_early_channel_count(struct amd64_pvt *pvt) { - int dbams[] = { DBAM0, DBAM1 }; int i, j, channels = 0; - u32 dbam; - /* If we are in 128 bit mode, then we are using 2 channels */ - if (pvt->dclr0 & F10_WIDTH_128) { - channels = 2; - return channels; - } + /* On F10h, if we are in 128 bit mode, then we are using 2 channels */ + if (boot_cpu_data.x86 == 0x10 && (pvt->dclr0 & WIDTH_128)) + return 2; /* * Need to check if in unganged mode: In such, there are 2 channels, @@ -1173,9 +1087,8 @@ static int f10_early_channel_count(struct amd64_pvt *pvt) * is more than just one DIMM present in unganged mode. Need to check * both controllers since DIMMs can be placed in either one. */ - for (i = 0; i < ARRAY_SIZE(dbams); i++) { - if (amd64_read_pci_cfg(pvt->F2, dbams[i], &dbam)) - goto err_reg; + for (i = 0; i < 2; i++) { + u32 dbam = (i ? pvt->dbam1 : pvt->dbam0); for (j = 0; j < 4; j++) { if (DBAM_DIMM(j, dbam) > 0) { @@ -1191,216 +1104,191 @@ static int f10_early_channel_count(struct amd64_pvt *pvt) amd64_info("MCT channel count: %d\n", channels); return channels; - -err_reg: - return -1; - } -static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode) +static int ddr3_cs_size(unsigned i, bool dct_width) { - int *dbam_map; + unsigned shift = 0; + int cs_size = 0; - if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE) - dbam_map = ddr3_dbam; + if (i == 0 || i == 3 || i == 4) + cs_size = -1; + else if (i <= 2) + shift = i; + else if (i == 12) + shift = 7; + else if (!(i & 0x1)) + shift = i >> 1; else - dbam_map = ddr2_dbam; + shift = (i + 1) >> 1; - return dbam_map[cs_mode]; + if (cs_size != -1) + cs_size = (128 * (1 << !!dct_width)) << shift; + + return cs_size; } -static u64 f10_get_error_address(struct mem_ctl_info *mci, - struct err_regs *info) +static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode) { - return (((u64) (info->nbeah & 0xffff)) << 32) + - (info->nbeal & ~0x01); + u32 dclr = dct ? pvt->dclr1 : pvt->dclr0; + + WARN_ON(cs_mode > 11); + + if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE) + return ddr3_cs_size(cs_mode, dclr & WIDTH_128); + else + return ddr2_cs_size(cs_mode, dclr & WIDTH_128); } /* - * Read the Base and Limit registers for F10 based Memory controllers. Extract - * fields from the 'raw' reg into separate data fields. - * - * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN. + * F15h supports only 64bit DCT interfaces */ -static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram) +static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode) { - u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit; - - low_offset = K8_DRAM_BASE_LOW + (dram << 3); - high_offset = F10_DRAM_BASE_HIGH + (dram << 3); - - /* read the 'raw' DRAM BASE Address register */ - amd64_read_pci_cfg(pvt->F1, low_offset, &low_base); - amd64_read_pci_cfg(pvt->F1, high_offset, &high_base); - - /* Extract parts into separate data entries */ - pvt->dram_rw_en[dram] = (low_base & 0x3); - - if (pvt->dram_rw_en[dram] == 0) - return; - - pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7; - - pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) | - (((u64)low_base & 0xFFFF0000) << 8); - - low_offset = K8_DRAM_LIMIT_LOW + (dram << 3); - high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3); + WARN_ON(cs_mode > 12); - /* read the 'raw' LIMIT registers */ - amd64_read_pci_cfg(pvt->F1, low_offset, &low_limit); - amd64_read_pci_cfg(pvt->F1, high_offset, &high_limit); - - pvt->dram_DstNode[dram] = (low_limit & 0x7); - pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7; - - /* - * Extract address values and form a LIMIT address. Limit is the HIGHEST - * memory location of the region, so low 24 bits need to be all ones. - */ - pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) | - (((u64) low_limit & 0xFFFF0000) << 8) | - 0x00FFFFFF; + return ddr3_cs_size(cs_mode, false); } -static void f10_read_dram_ctl_register(struct amd64_pvt *pvt) +static void read_dram_ctl_register(struct amd64_pvt *pvt) { - if (!amd64_read_pci_cfg(pvt->F2, F10_DCTL_SEL_LOW, - &pvt->dram_ctl_select_low)) { - debugf0("F2x110 (DCTL Sel. Low): 0x%08x, " - "High range addresses at: 0x%x\n", - pvt->dram_ctl_select_low, - dct_sel_baseaddr(pvt)); + if (boot_cpu_data.x86 == 0xf) + return; + + if (!amd64_read_dct_pci_cfg(pvt, DCT_SEL_LO, &pvt->dct_sel_lo)) { + debugf0("F2x110 (DCTSelLow): 0x%08x, High range addrs at: 0x%x\n", + pvt->dct_sel_lo, dct_sel_baseaddr(pvt)); - debugf0(" DCT mode: %s, All DCTs on: %s\n", - (dct_ganging_enabled(pvt) ? "ganged" : "unganged"), - (dct_dram_enabled(pvt) ? "yes" : "no")); + debugf0(" DCTs operate in %s mode.\n", + (dct_ganging_enabled(pvt) ? "ganged" : "unganged")); if (!dct_ganging_enabled(pvt)) debugf0(" Address range split per DCT: %s\n", (dct_high_range_enabled(pvt) ? "yes" : "no")); - debugf0(" DCT data interleave for ECC: %s, " + debugf0(" data interleave for ECC: %s, " "DRAM cleared since last warm reset: %s\n", (dct_data_intlv_enabled(pvt) ? "enabled" : "disabled"), (dct_memory_cleared(pvt) ? "yes" : "no")); - debugf0(" DCT channel interleave: %s, " - "DCT interleave bits selector: 0x%x\n", + debugf0(" channel interleave: %s, " + "interleave bits selector: 0x%x\n", (dct_interleave_enabled(pvt) ? "enabled" : "disabled"), dct_sel_interleave_addr(pvt)); } - amd64_read_pci_cfg(pvt->F2, F10_DCTL_SEL_HIGH, - &pvt->dram_ctl_select_high); + amd64_read_dct_pci_cfg(pvt, DCT_SEL_HI, &pvt->dct_sel_hi); } /* - * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory + * Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory * Interleaving Modes. */ -static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, - int hi_range_sel, u32 intlv_en) +static u8 f1x_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, + bool hi_range_sel, u8 intlv_en) { - u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1; + u8 dct_sel_high = (pvt->dct_sel_lo >> 1) & 1; if (dct_ganging_enabled(pvt)) - cs = 0; - else if (hi_range_sel) - cs = dct_sel_high; - else if (dct_interleave_enabled(pvt)) { - /* - * see F2x110[DctSelIntLvAddr] - channel interleave mode - */ - if (dct_sel_interleave_addr(pvt) == 0) - cs = sys_addr >> 6 & 1; - else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) { - temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2; + return 0; - if (dct_sel_interleave_addr(pvt) & 1) - cs = (sys_addr >> 9 & 1) ^ temp; - else - cs = (sys_addr >> 6 & 1) ^ temp; - } else if (intlv_en & 4) - cs = sys_addr >> 15 & 1; - else if (intlv_en & 2) - cs = sys_addr >> 14 & 1; - else if (intlv_en & 1) - cs = sys_addr >> 13 & 1; - else - cs = sys_addr >> 12 & 1; - } else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt)) - cs = ~dct_sel_high & 1; - else - cs = 0; + if (hi_range_sel) + return dct_sel_high; - return cs; -} + /* + * see F2x110[DctSelIntLvAddr] - channel interleave mode + */ + if (dct_interleave_enabled(pvt)) { + u8 intlv_addr = dct_sel_interleave_addr(pvt); -static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en) -{ - if (intlv_en == 1) - return 1; - else if (intlv_en == 3) - return 2; - else if (intlv_en == 7) - return 3; + /* return DCT select function: 0=DCT0, 1=DCT1 */ + if (!intlv_addr) + return sys_addr >> 6 & 1; + + if (intlv_addr & 0x2) { + u8 shift = intlv_addr & 0x1 ? 9 : 6; + u32 temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2; + + return ((sys_addr >> shift) & 1) ^ temp; + } + + return (sys_addr >> (12 + hweight8(intlv_en))) & 1; + } + + if (dct_high_range_enabled(pvt)) + return ~dct_sel_high & 1; return 0; } -/* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */ -static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel, - u32 dct_sel_base_addr, - u64 dct_sel_base_off, - u32 hole_valid, u32 hole_off, - u64 dram_base) +/* Convert the sys_addr to the normalized DCT address */ +static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, unsigned range, + u64 sys_addr, bool hi_rng, + u32 dct_sel_base_addr) { u64 chan_off; + u64 dram_base = get_dram_base(pvt, range); + u64 hole_off = f10_dhar_offset(pvt); + u64 dct_sel_base_off = (pvt->dct_sel_hi & 0xFFFFFC00) << 16; - if (hi_range_sel) { - if (!(dct_sel_base_addr & 0xFFFF0000) && - hole_valid && (sys_addr >= 0x100000000ULL)) - chan_off = hole_off << 16; + if (hi_rng) { + /* + * if + * base address of high range is below 4Gb + * (bits [47:27] at [31:11]) + * DRAM address space on this DCT is hoisted above 4Gb && + * sys_addr > 4Gb + * + * remove hole offset from sys_addr + * else + * remove high range offset from sys_addr + */ + if ((!(dct_sel_base_addr >> 16) || + dct_sel_base_addr < dhar_base(pvt)) && + dhar_valid(pvt) && + (sys_addr >= BIT_64(32))) + chan_off = hole_off; else chan_off = dct_sel_base_off; } else { - if (hole_valid && (sys_addr >= 0x100000000ULL)) - chan_off = hole_off << 16; + /* + * if + * we have a valid hole && + * sys_addr > 4Gb + * + * remove hole + * else + * remove dram base to normalize to DCT address + */ + if (dhar_valid(pvt) && (sys_addr >= BIT_64(32))) + chan_off = hole_off; else - chan_off = dram_base & 0xFFFFF8000000ULL; + chan_off = dram_base; } - return (sys_addr & 0x0000FFFFFFFFFFC0ULL) - - (chan_off & 0x0000FFFFFF800000ULL); + return (sys_addr & GENMASK(6,47)) - (chan_off & GENMASK(23,47)); } -/* Hack for the time being - Can we get this from BIOS?? */ -#define CH0SPARE_RANK 0 -#define CH1SPARE_RANK 1 - /* * checks if the csrow passed in is marked as SPARED, if so returns the new * spare row */ -static inline int f10_process_possible_spare(int csrow, - u32 cs, struct amd64_pvt *pvt) -{ - u32 swap_done; - u32 bad_dram_cs; - - /* Depending on channel, isolate respective SPARING info */ - if (cs) { - swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare); - bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare); - if (swap_done && (csrow == bad_dram_cs)) - csrow = CH1SPARE_RANK; - } else { - swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare); - bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare); - if (swap_done && (csrow == bad_dram_cs)) - csrow = CH0SPARE_RANK; +static int f10_process_possible_spare(struct amd64_pvt *pvt, u8 dct, int csrow) +{ + int tmp_cs; + + if (online_spare_swap_done(pvt, dct) && + csrow == online_spare_bad_dramcs(pvt, dct)) { + + for_each_chip_select(tmp_cs, dct, pvt) { + if (chip_select_base(tmp_cs, dct, pvt) & 0x2) { + csrow = tmp_cs; + break; + } + } } return csrow; } @@ -1413,11 +1301,11 @@ static inline int f10_process_possible_spare(int csrow, * -EINVAL: NOT FOUND * 0..csrow = Chip-Select Row */ -static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) +static int f1x_lookup_addr_in_dct(u64 in_addr, u32 nid, u8 dct) { struct mem_ctl_info *mci; struct amd64_pvt *pvt; - u32 cs_base, cs_mask; + u64 cs_base, cs_mask; int cs_found = -EINVAL; int csrow; @@ -1427,39 +1315,25 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) pvt = mci->pvt_info; - debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs); - - for (csrow = 0; csrow < pvt->cs_count; csrow++) { + debugf1("input addr: 0x%llx, DCT: %d\n", in_addr, dct); - cs_base = amd64_get_dct_base(pvt, cs, csrow); - if (!(cs_base & K8_DCSB_CS_ENABLE)) + for_each_chip_select(csrow, dct, pvt) { + if (!csrow_enabled(csrow, dct, pvt)) continue; - /* - * We have an ENABLED CSROW, Isolate just the MASK bits of the - * target: [28:19] and [13:5], which map to [36:27] and [21:13] - * of the actual address. - */ - cs_base &= REV_F_F1Xh_DCSB_BASE_BITS; - - /* - * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and - * [4:0] to become ON. Then mask off bits [28:0] ([36:8]) - */ - cs_mask = amd64_get_dct_mask(pvt, cs, csrow); + get_cs_base_and_mask(pvt, csrow, dct, &cs_base, &cs_mask); - debugf1(" CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n", - csrow, cs_base, cs_mask); + debugf1(" CSROW=%d CSBase=0x%llx CSMask=0x%llx\n", + csrow, cs_base, cs_mask); - cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF; + cs_mask = ~cs_mask; - debugf1(" Final CSMask=0x%x\n", cs_mask); - debugf1(" (InputAddr & ~CSMask)=0x%x " - "(CSBase & ~CSMask)=0x%x\n", - (in_addr & ~cs_mask), (cs_base & ~cs_mask)); + debugf1(" (InputAddr & ~CSMask)=0x%llx " + "(CSBase & ~CSMask)=0x%llx\n", + (in_addr & cs_mask), (cs_base & cs_mask)); - if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) { - cs_found = f10_process_possible_spare(csrow, cs, pvt); + if ((in_addr & cs_mask) == (cs_base & cs_mask)) { + cs_found = f10_process_possible_spare(pvt, dct, csrow); debugf1(" MATCH csrow=%d\n", cs_found); break; @@ -1468,38 +1342,75 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) return cs_found; } -/* For a given @dram_range, check if @sys_addr falls within it. */ -static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, - u64 sys_addr, int *nid, int *chan_sel) +/* + * See F2x10C. Non-interleaved graphics framebuffer memory under the 16G is + * swapped with a region located at the bottom of memory so that the GPU can use + * the interleaved region and thus two channels. + */ +static u64 f1x_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr) { - int node_id, cs_found = -EINVAL, high_range = 0; - u32 intlv_en, intlv_sel, intlv_shift, hole_off; - u32 hole_valid, tmp, dct_sel_base, channel; - u64 dram_base, chan_addr, dct_sel_base_off; + u32 swap_reg, swap_base, swap_limit, rgn_size, tmp_addr; - dram_base = pvt->dram_base[dram_range]; - intlv_en = pvt->dram_IntlvEn[dram_range]; + if (boot_cpu_data.x86 == 0x10) { + /* only revC3 and revE have that feature */ + if (boot_cpu_data.x86_model < 4 || + (boot_cpu_data.x86_model < 0xa && + boot_cpu_data.x86_mask < 3)) + return sys_addr; + } - node_id = pvt->dram_DstNode[dram_range]; - intlv_sel = pvt->dram_IntlvSel[dram_range]; + amd64_read_dct_pci_cfg(pvt, SWAP_INTLV_REG, &swap_reg); - debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n", - dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]); + if (!(swap_reg & 0x1)) + return sys_addr; - /* - * This assumes that one node's DHAR is the same as all the other - * nodes' DHAR. - */ - hole_off = (pvt->dhar & 0x0000FF80); - hole_valid = (pvt->dhar & 0x1); - dct_sel_base_off = (pvt->dram_ctl_select_high & 0xFFFFFC00) << 16; + swap_base = (swap_reg >> 3) & 0x7f; + swap_limit = (swap_reg >> 11) & 0x7f; + rgn_size = (swap_reg >> 20) & 0x7f; + tmp_addr = sys_addr >> 27; - debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n", - hole_off, hole_valid, intlv_sel); + if (!(sys_addr >> 34) && + (((tmp_addr >= swap_base) && + (tmp_addr <= swap_limit)) || + (tmp_addr < rgn_size))) + return sys_addr ^ (u64)swap_base << 27; + + return sys_addr; +} + +/* For a given @dram_range, check if @sys_addr falls within it. */ +static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range, + u64 sys_addr, int *nid, int *chan_sel) +{ + int cs_found = -EINVAL; + u64 chan_addr; + u32 dct_sel_base; + u8 channel; + bool high_range = false; + + u8 node_id = dram_dst_node(pvt, range); + u8 intlv_en = dram_intlv_en(pvt, range); + u32 intlv_sel = dram_intlv_sel(pvt, range); + + debugf1("(range %d) SystemAddr= 0x%llx Limit=0x%llx\n", + range, sys_addr, get_dram_limit(pvt, range)); + + if (dhar_valid(pvt) && + dhar_base(pvt) <= sys_addr && + sys_addr < BIT_64(32)) { + amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n", + sys_addr); + return -EINVAL; + } if (intlv_en && - (intlv_sel != ((sys_addr >> 12) & intlv_en))) + (intlv_sel != ((sys_addr >> 12) & intlv_en))) { + amd64_warn("Botched intlv bits, en: 0x%x, sel: 0x%x\n", + intlv_en, intlv_sel); return -EINVAL; + } + + sys_addr = f1x_swap_interleaved_region(pvt, sys_addr); dct_sel_base = dct_sel_baseaddr(pvt); @@ -1510,38 +1421,41 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt) && ((sys_addr >> 27) >= (dct_sel_base >> 11))) - high_range = 1; - - channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en); - - chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base, - dct_sel_base_off, hole_valid, - hole_off, dram_base); + high_range = true; - intlv_shift = f10_map_intlv_en_to_shift(intlv_en); + channel = f1x_determine_channel(pvt, sys_addr, high_range, intlv_en); - /* remove Node ID (in case of memory interleaving) */ - tmp = chan_addr & 0xFC0; + chan_addr = f1x_get_norm_dct_addr(pvt, range, sys_addr, + high_range, dct_sel_base); - chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp; + /* Remove node interleaving, see F1x120 */ + if (intlv_en) + chan_addr = ((chan_addr >> (12 + hweight8(intlv_en))) << 12) | + (chan_addr & 0xfff); - /* remove channel interleave and hash */ + /* remove channel interleave */ if (dct_interleave_enabled(pvt) && !dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt)) { - if (dct_sel_interleave_addr(pvt) != 1) - chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL; - else { - tmp = chan_addr & 0xFC0; - chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1) - | tmp; - } + + if (dct_sel_interleave_addr(pvt) != 1) { + if (dct_sel_interleave_addr(pvt) == 0x3) + /* hash 9 */ + chan_addr = ((chan_addr >> 10) << 9) | + (chan_addr & 0x1ff); + else + /* A[6] or hash 6 */ + chan_addr = ((chan_addr >> 7) << 6) | + (chan_addr & 0x3f); + } else + /* A[12] */ + chan_addr = ((chan_addr >> 13) << 12) | + (chan_addr & 0xfff); } - debugf1(" (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n", - chan_addr, (u32)(chan_addr >> 8)); + debugf1(" Normalized DCT addr: 0x%llx\n", chan_addr); - cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel); + cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, channel); if (cs_found >= 0) { *nid = node_id; @@ -1550,23 +1464,21 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, return cs_found; } -static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, +static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, int *node, int *chan_sel) { - int dram_range, cs_found = -EINVAL; - u64 dram_base, dram_limit; + int cs_found = -EINVAL; + unsigned range; - for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) { + for (range = 0; range < DRAM_RANGES; range++) { - if (!pvt->dram_rw_en[dram_range]) + if (!dram_rw(pvt, range)) continue; - dram_base = pvt->dram_base[dram_range]; - dram_limit = pvt->dram_limit[dram_range]; - - if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) { + if ((get_dram_base(pvt, range) <= sys_addr) && + (get_dram_limit(pvt, range) >= sys_addr)) { - cs_found = f10_match_to_this_node(pvt, dram_range, + cs_found = f1x_match_to_this_node(pvt, range, sys_addr, node, chan_sel); if (cs_found >= 0) @@ -1583,16 +1495,14 @@ static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, * The @sys_addr is usually an error address received from the hardware * (MCX_ADDR). */ -static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, - struct err_regs *err_info, - u64 sys_addr) +static void f1x_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr, + u16 syndrome) { struct amd64_pvt *pvt = mci->pvt_info; u32 page, offset; int nid, csrow, chan = 0; - u16 syndrome; - csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan); + csrow = f1x_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan); if (csrow < 0) { edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); @@ -1601,14 +1511,12 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, error_address_to_page_and_offset(sys_addr, &page, &offset); - syndrome = extract_syndrome(err_info); - /* * We need the syndromes for channel detection only when we're * ganged. Otherwise @chan should already contain the channel at * this point. */ - if (dct_ganging_enabled(pvt) && (pvt->nbcfg & K8_NBCFG_CHIPKILL)) + if (dct_ganging_enabled(pvt)) chan = get_channel_from_ecc_syndrome(mci, syndrome); if (chan >= 0) @@ -1625,16 +1533,16 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, /* * debug routine to display the memory sizes of all logical DIMMs and its - * CSROWs as well + * CSROWs */ -static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt) +static void amd64_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) { int dimm, size0, size1, factor = 0; - u32 dbam; - u32 *dcsb; + u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases; + u32 dbam = ctrl ? pvt->dbam1 : pvt->dbam0; if (boot_cpu_data.x86 == 0xf) { - if (pvt->dclr0 & F10_WIDTH_128) + if (pvt->dclr0 & WIDTH_128) factor = 1; /* K8 families < revF not supported yet */ @@ -1644,11 +1552,11 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt) WARN_ON(ctrl != 0); } - debugf1("F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n", - ctrl, ctrl ? pvt->dbam1 : pvt->dbam0); + dbam = (ctrl && !dct_ganging_enabled(pvt)) ? pvt->dbam1 : pvt->dbam0; + dcsb = (ctrl && !dct_ganging_enabled(pvt)) ? pvt->csels[1].csbases + : pvt->csels[0].csbases; - dbam = ctrl ? pvt->dbam1 : pvt->dbam0; - dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0; + debugf1("F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n", ctrl, dbam); edac_printk(KERN_DEBUG, EDAC_MC, "DCT%d chip selects:\n", ctrl); @@ -1656,12 +1564,14 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt) for (dimm = 0; dimm < 4; dimm++) { size0 = 0; - if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE) - size0 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam)); + if (dcsb[dimm*2] & DCSB_CS_ENABLE) + size0 = pvt->ops->dbam_to_cs(pvt, ctrl, + DBAM_DIMM(dimm, dbam)); size1 = 0; - if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE) - size1 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam)); + if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE) + size1 = pvt->ops->dbam_to_cs(pvt, ctrl, + DBAM_DIMM(dimm, dbam)); amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n", dimm * 2, size0 << factor, @@ -1676,10 +1586,9 @@ static struct amd64_family_type amd64_family_types[] = { .f3_id = PCI_DEVICE_ID_AMD_K8_NB_MISC, .ops = { .early_channel_count = k8_early_channel_count, - .get_error_address = k8_get_error_address, - .read_dram_base_limit = k8_read_dram_base_limit, .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, .dbam_to_cs = k8_dbam_to_chip_select, + .read_dct_pci_cfg = k8_read_dct_pci_cfg, } }, [F10_CPUS] = { @@ -1687,12 +1596,21 @@ static struct amd64_family_type amd64_family_types[] = { .f1_id = PCI_DEVICE_ID_AMD_10H_NB_MAP, .f3_id = PCI_DEVICE_ID_AMD_10H_NB_MISC, .ops = { - .early_channel_count = f10_early_channel_count, - .get_error_address = f10_get_error_address, - .read_dram_base_limit = f10_read_dram_base_limit, - .read_dram_ctl_register = f10_read_dram_ctl_register, - .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow, + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, .dbam_to_cs = f10_dbam_to_chip_select, + .read_dct_pci_cfg = f10_read_dct_pci_cfg, + } + }, + [F15_CPUS] = { + .ctl_name = "F15h", + .f1_id = PCI_DEVICE_ID_AMD_15H_NB_F1, + .f3_id = PCI_DEVICE_ID_AMD_15H_NB_F3, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f15_dbam_to_chip_select, + .read_dct_pci_cfg = f15_read_dct_pci_cfg, } }, }; @@ -1782,15 +1700,15 @@ static u16 x8_vectors[] = { 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000, 0x8000, }; -static int decode_syndrome(u16 syndrome, u16 *vectors, int num_vecs, - int v_dim) +static int decode_syndrome(u16 syndrome, u16 *vectors, unsigned num_vecs, + unsigned v_dim) { unsigned int i, err_sym; for (err_sym = 0; err_sym < num_vecs / v_dim; err_sym++) { u16 s = syndrome; - int v_idx = err_sym * v_dim; - int v_end = (err_sym + 1) * v_dim; + unsigned v_idx = err_sym * v_dim; + unsigned v_end = (err_sym + 1) * v_dim; /* walk over all 16 bits of the syndrome */ for (i = 1; i < (1U << 16); i <<= 1) { @@ -1862,51 +1780,50 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome) struct amd64_pvt *pvt = mci->pvt_info; int err_sym = -1; - if (pvt->syn_type == 8) + if (pvt->ecc_sym_sz == 8) err_sym = decode_syndrome(syndrome, x8_vectors, ARRAY_SIZE(x8_vectors), - pvt->syn_type); - else if (pvt->syn_type == 4) + pvt->ecc_sym_sz); + else if (pvt->ecc_sym_sz == 4) err_sym = decode_syndrome(syndrome, x4_vectors, ARRAY_SIZE(x4_vectors), - pvt->syn_type); + pvt->ecc_sym_sz); else { - amd64_warn("Illegal syndrome type: %u\n", pvt->syn_type); + amd64_warn("Illegal syndrome type: %u\n", pvt->ecc_sym_sz); return err_sym; } - return map_err_sym_to_channel(err_sym, pvt->syn_type); + return map_err_sym_to_channel(err_sym, pvt->ecc_sym_sz); } /* * Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR * ADDRESS and process. */ -static void amd64_handle_ce(struct mem_ctl_info *mci, - struct err_regs *info) +static void amd64_handle_ce(struct mem_ctl_info *mci, struct mce *m) { struct amd64_pvt *pvt = mci->pvt_info; u64 sys_addr; + u16 syndrome; /* Ensure that the Error Address is VALID */ - if (!(info->nbsh & K8_NBSH_VALID_ERROR_ADDR)) { + if (!(m->status & MCI_STATUS_ADDRV)) { amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n"); edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); return; } - sys_addr = pvt->ops->get_error_address(mci, info); + sys_addr = get_error_address(m); + syndrome = extract_syndrome(m->status); amd64_mc_err(mci, "CE ERROR_ADDRESS= 0x%llx\n", sys_addr); - pvt->ops->map_sysaddr_to_csrow(mci, info, sys_addr); + pvt->ops->map_sysaddr_to_csrow(mci, sys_addr, syndrome); } /* Handle any Un-correctable Errors (UEs) */ -static void amd64_handle_ue(struct mem_ctl_info *mci, - struct err_regs *info) +static void amd64_handle_ue(struct mem_ctl_info *mci, struct mce *m) { - struct amd64_pvt *pvt = mci->pvt_info; struct mem_ctl_info *log_mci, *src_mci = NULL; int csrow; u64 sys_addr; @@ -1914,13 +1831,13 @@ static void amd64_handle_ue(struct mem_ctl_info *mci, log_mci = mci; - if (!(info->nbsh & K8_NBSH_VALID_ERROR_ADDR)) { + if (!(m->status & MCI_STATUS_ADDRV)) { amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n"); edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); return; } - sys_addr = pvt->ops->get_error_address(mci, info); + sys_addr = get_error_address(m); /* * Find out which node the error address belongs to. This may be @@ -1948,14 +1865,14 @@ static void amd64_handle_ue(struct mem_ctl_info *mci, } static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, - struct err_regs *info) + struct mce *m) { - u16 ec = EC(info->nbsl); - u8 xec = XEC(info->nbsl, 0x1f); - int ecc_type = (info->nbsh >> 13) & 0x3; + u16 ec = EC(m->status); + u8 xec = XEC(m->status, 0x1f); + u8 ecc_type = (m->status >> 45) & 0x3; /* Bail early out if this was an 'observed' error */ - if (PP(ec) == K8_NBSL_PP_OBS) + if (PP(ec) == NBSL_PP_OBS) return; /* Do only ECC errors */ @@ -1963,34 +1880,16 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, return; if (ecc_type == 2) - amd64_handle_ce(mci, info); + amd64_handle_ce(mci, m); else if (ecc_type == 1) - amd64_handle_ue(mci, info); + amd64_handle_ue(mci, m); } void amd64_decode_bus_error(int node_id, struct mce *m, u32 nbcfg) { struct mem_ctl_info *mci = mcis[node_id]; - struct err_regs regs; - - regs.nbsl = (u32) m->status; - regs.nbsh = (u32)(m->status >> 32); - regs.nbeal = (u32) m->addr; - regs.nbeah = (u32)(m->addr >> 32); - regs.nbcfg = nbcfg; - - __amd64_decode_bus_error(mci, ®s); - - /* - * Check the UE bit of the NB status high register, if set generate some - * logs. If NOT a GART error, then process the event as a NO-INFO event. - * If it was a GART error, skip that process. - * - * FIXME: this should go somewhere else, if at all. - */ - if (regs.nbsh & K8_NBSH_UC_ERR && !report_gart_errors) - edac_mc_handle_ue_no_info(mci, "UE bit is set"); + __amd64_decode_bus_error(mci, m); } /* @@ -2039,9 +1938,10 @@ static void free_mc_sibling_devs(struct amd64_pvt *pvt) */ static void read_mc_regs(struct amd64_pvt *pvt) { + struct cpuinfo_x86 *c = &boot_cpu_data; u64 msr_val; u32 tmp; - int dram; + unsigned range; /* * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since @@ -2058,75 +1958,66 @@ static void read_mc_regs(struct amd64_pvt *pvt) } else debugf0(" TOP_MEM2 disabled.\n"); - amd64_read_pci_cfg(pvt->F3, K8_NBCAP, &pvt->nbcap); + amd64_read_pci_cfg(pvt->F3, NBCAP, &pvt->nbcap); - if (pvt->ops->read_dram_ctl_register) - pvt->ops->read_dram_ctl_register(pvt); + read_dram_ctl_register(pvt); - for (dram = 0; dram < DRAM_REG_COUNT; dram++) { - /* - * Call CPU specific READ function to get the DRAM Base and - * Limit values from the DCT. - */ - pvt->ops->read_dram_base_limit(pvt, dram); + for (range = 0; range < DRAM_RANGES; range++) { + u8 rw; - /* - * Only print out debug info on rows with both R and W Enabled. - * Normal processing, compiler should optimize this whole 'if' - * debug output block away. - */ - if (pvt->dram_rw_en[dram] != 0) { - debugf1(" DRAM-BASE[%d]: 0x%016llx " - "DRAM-LIMIT: 0x%016llx\n", - dram, - pvt->dram_base[dram], - pvt->dram_limit[dram]); - - debugf1(" IntlvEn=%s %s %s " - "IntlvSel=%d DstNode=%d\n", - pvt->dram_IntlvEn[dram] ? - "Enabled" : "Disabled", - (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W", - (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R", - pvt->dram_IntlvSel[dram], - pvt->dram_DstNode[dram]); - } + /* read settings for this DRAM range */ + read_dram_base_limit_regs(pvt, range); + + rw = dram_rw(pvt, range); + if (!rw) + continue; + + debugf1(" DRAM range[%d], base: 0x%016llx; limit: 0x%016llx\n", + range, + get_dram_base(pvt, range), + get_dram_limit(pvt, range)); + + debugf1(" IntlvEn=%s; Range access: %s%s IntlvSel=%d DstNode=%d\n", + dram_intlv_en(pvt, range) ? "Enabled" : "Disabled", + (rw & 0x1) ? "R" : "-", + (rw & 0x2) ? "W" : "-", + dram_intlv_sel(pvt, range), + dram_dst_node(pvt, range)); } - amd64_read_dct_base_mask(pvt); + read_dct_base_mask(pvt); - amd64_read_pci_cfg(pvt->F1, K8_DHAR, &pvt->dhar); - amd64_read_dbam_reg(pvt); + amd64_read_pci_cfg(pvt->F1, DHAR, &pvt->dhar); + amd64_read_dct_pci_cfg(pvt, DBAM0, &pvt->dbam0); amd64_read_pci_cfg(pvt->F3, F10_ONLINE_SPARE, &pvt->online_spare); - amd64_read_pci_cfg(pvt->F2, F10_DCLR_0, &pvt->dclr0); - amd64_read_pci_cfg(pvt->F2, F10_DCHR_0, &pvt->dchr0); + amd64_read_dct_pci_cfg(pvt, DCLR0, &pvt->dclr0); + amd64_read_dct_pci_cfg(pvt, DCHR0, &pvt->dchr0); - if (boot_cpu_data.x86 >= 0x10) { - if (!dct_ganging_enabled(pvt)) { - amd64_read_pci_cfg(pvt->F2, F10_DCLR_1, &pvt->dclr1); - amd64_read_pci_cfg(pvt->F2, F10_DCHR_1, &pvt->dchr1); - } - amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp); + if (!dct_ganging_enabled(pvt)) { + amd64_read_dct_pci_cfg(pvt, DCLR1, &pvt->dclr1); + amd64_read_dct_pci_cfg(pvt, DCHR1, &pvt->dchr1); } - if (boot_cpu_data.x86 == 0x10 && - boot_cpu_data.x86_model > 7 && - /* F3x180[EccSymbolSize]=1 => x8 symbols */ - tmp & BIT(25)) - pvt->syn_type = 8; - else - pvt->syn_type = 4; + pvt->ecc_sym_sz = 4; - amd64_dump_misc_regs(pvt); + if (c->x86 >= 0x10) { + amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp); + amd64_read_dct_pci_cfg(pvt, DBAM1, &pvt->dbam1); + + /* F10h, revD and later can do x8 ECC too */ + if ((c->x86 > 0x10 || c->x86_model > 7) && tmp & BIT(25)) + pvt->ecc_sym_sz = 8; + } + dump_misc_regs(pvt); } /* * NOTE: CPU Revision Dependent code * * Input: - * @csrow_nr ChipSelect Row Number (0..pvt->cs_count-1) + * @csrow_nr ChipSelect Row Number (0..NUM_CHIPSELECTS-1) * k8 private pointer to --> * DRAM Bank Address mapping register * node_id @@ -2156,7 +2047,7 @@ static void read_mc_regs(struct amd64_pvt *pvt) * encompasses * */ -static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt) +static u32 amd64_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr) { u32 cs_mode, nr_pages; @@ -2169,7 +2060,7 @@ static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt) */ cs_mode = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF; - nr_pages = pvt->ops->dbam_to_cs(pvt, cs_mode) << (20 - PAGE_SHIFT); + nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT); /* * If dual channel then double the memory size of single channel. @@ -2192,23 +2083,22 @@ static int init_csrows(struct mem_ctl_info *mci) { struct csrow_info *csrow; struct amd64_pvt *pvt = mci->pvt_info; - u64 input_addr_min, input_addr_max, sys_addr; + u64 input_addr_min, input_addr_max, sys_addr, base, mask; u32 val; int i, empty = 1; - amd64_read_pci_cfg(pvt->F3, K8_NBCFG, &val); + amd64_read_pci_cfg(pvt->F3, NBCFG, &val); pvt->nbcfg = val; - pvt->ctl_error_info.nbcfg = val; debugf0("node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n", pvt->mc_node_id, val, - !!(val & K8_NBCFG_CHIPKILL), !!(val & K8_NBCFG_ECC_ENABLE)); + !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE)); - for (i = 0; i < pvt->cs_count; i++) { + for_each_chip_select(i, 0, pvt) { csrow = &mci->csrows[i]; - if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) { + if (!csrow_enabled(i, 0, pvt)) { debugf1("----CSROW %d EMPTY for node %d\n", i, pvt->mc_node_id); continue; @@ -2218,13 +2108,15 @@ static int init_csrows(struct mem_ctl_info *mci) i, pvt->mc_node_id); empty = 0; - csrow->nr_pages = amd64_csrow_nr_pages(i, pvt); + csrow->nr_pages = amd64_csrow_nr_pages(pvt, 0, i); find_csrow_limits(mci, i, &input_addr_min, &input_addr_max); sys_addr = input_addr_to_sys_addr(mci, input_addr_min); csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT); sys_addr = input_addr_to_sys_addr(mci, input_addr_max); csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT); - csrow->page_mask = ~mask_from_dct_mask(pvt, i); + + get_cs_base_and_mask(pvt, i, 0, &base, &mask); + csrow->page_mask = ~mask; /* 8 bytes of resolution */ csrow->mtype = amd64_determine_memory_type(pvt, i); @@ -2243,9 +2135,9 @@ static int init_csrows(struct mem_ctl_info *mci) /* * determine whether CHIPKILL or JUST ECC or NO ECC is operating */ - if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) + if (pvt->nbcfg & NBCFG_ECC_ENABLE) csrow->edac_mode = - (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? + (pvt->nbcfg & NBCFG_CHIPKILL) ? EDAC_S4ECD4ED : EDAC_SECDED; else csrow->edac_mode = EDAC_NONE; @@ -2255,7 +2147,7 @@ static int init_csrows(struct mem_ctl_info *mci) } /* get all cores on this DCT */ -static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, int nid) +static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, unsigned nid) { int cpu; @@ -2265,7 +2157,7 @@ static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, int nid) } /* check MCG_CTL on all the cpus on this node */ -static bool amd64_nb_mce_bank_enabled_on_node(int nid) +static bool amd64_nb_mce_bank_enabled_on_node(unsigned nid) { cpumask_var_t mask; int cpu, nbe; @@ -2282,7 +2174,7 @@ static bool amd64_nb_mce_bank_enabled_on_node(int nid) for_each_cpu(cpu, mask) { struct msr *reg = per_cpu_ptr(msrs, cpu); - nbe = reg->l & K8_MSR_MCGCTL_NBE; + nbe = reg->l & MSR_MCGCTL_NBE; debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n", cpu, reg->q, @@ -2317,16 +2209,16 @@ static int toggle_ecc_err_reporting(struct ecc_settings *s, u8 nid, bool on) struct msr *reg = per_cpu_ptr(msrs, cpu); if (on) { - if (reg->l & K8_MSR_MCGCTL_NBE) + if (reg->l & MSR_MCGCTL_NBE) s->flags.nb_mce_enable = 1; - reg->l |= K8_MSR_MCGCTL_NBE; + reg->l |= MSR_MCGCTL_NBE; } else { /* * Turn off NB MCE reporting only when it was off before */ if (!s->flags.nb_mce_enable) - reg->l &= ~K8_MSR_MCGCTL_NBE; + reg->l &= ~MSR_MCGCTL_NBE; } } wrmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs); @@ -2340,40 +2232,38 @@ static bool enable_ecc_error_reporting(struct ecc_settings *s, u8 nid, struct pci_dev *F3) { bool ret = true; - u32 value, mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn; + u32 value, mask = 0x3; /* UECC/CECC enable */ if (toggle_ecc_err_reporting(s, nid, ON)) { amd64_warn("Error enabling ECC reporting over MCGCTL!\n"); return false; } - amd64_read_pci_cfg(F3, K8_NBCTL, &value); + amd64_read_pci_cfg(F3, NBCTL, &value); - /* turn on UECCEn and CECCEn bits */ s->old_nbctl = value & mask; s->nbctl_valid = true; value |= mask; - pci_write_config_dword(F3, K8_NBCTL, value); + amd64_write_pci_cfg(F3, NBCTL, value); - amd64_read_pci_cfg(F3, K8_NBCFG, &value); + amd64_read_pci_cfg(F3, NBCFG, &value); - debugf0("1: node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n", - nid, value, - !!(value & K8_NBCFG_CHIPKILL), !!(value & K8_NBCFG_ECC_ENABLE)); + debugf0("1: node %d, NBCFG=0x%08x[DramEccEn: %d]\n", + nid, value, !!(value & NBCFG_ECC_ENABLE)); - if (!(value & K8_NBCFG_ECC_ENABLE)) { + if (!(value & NBCFG_ECC_ENABLE)) { amd64_warn("DRAM ECC disabled on this node, enabling...\n"); s->flags.nb_ecc_prev = 0; /* Attempt to turn on DRAM ECC Enable */ - value |= K8_NBCFG_ECC_ENABLE; - pci_write_config_dword(F3, K8_NBCFG, value); + value |= NBCFG_ECC_ENABLE; + amd64_write_pci_cfg(F3, NBCFG, value); - amd64_read_pci_cfg(F3, K8_NBCFG, &value); + amd64_read_pci_cfg(F3, NBCFG, &value); - if (!(value & K8_NBCFG_ECC_ENABLE)) { + if (!(value & NBCFG_ECC_ENABLE)) { amd64_warn("Hardware rejected DRAM ECC enable," "check memory DIMM configuration.\n"); ret = false; @@ -2384,9 +2274,8 @@ static bool enable_ecc_error_reporting(struct ecc_settings *s, u8 nid, s->flags.nb_ecc_prev = 1; } - debugf0("2: node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n", - nid, value, - !!(value & K8_NBCFG_CHIPKILL), !!(value & K8_NBCFG_ECC_ENABLE)); + debugf0("2: node %d, NBCFG=0x%08x[DramEccEn: %d]\n", + nid, value, !!(value & NBCFG_ECC_ENABLE)); return ret; } @@ -2394,22 +2283,23 @@ static bool enable_ecc_error_reporting(struct ecc_settings *s, u8 nid, static void restore_ecc_error_reporting(struct ecc_settings *s, u8 nid, struct pci_dev *F3) { - u32 value, mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn; + u32 value, mask = 0x3; /* UECC/CECC enable */ + if (!s->nbctl_valid) return; - amd64_read_pci_cfg(F3, K8_NBCTL, &value); + amd64_read_pci_cfg(F3, NBCTL, &value); value &= ~mask; value |= s->old_nbctl; - pci_write_config_dword(F3, K8_NBCTL, value); + amd64_write_pci_cfg(F3, NBCTL, value); /* restore previous BIOS DRAM ECC "off" setting we force-enabled */ if (!s->flags.nb_ecc_prev) { - amd64_read_pci_cfg(F3, K8_NBCFG, &value); - value &= ~K8_NBCFG_ECC_ENABLE; - pci_write_config_dword(F3, K8_NBCFG, value); + amd64_read_pci_cfg(F3, NBCFG, &value); + value &= ~NBCFG_ECC_ENABLE; + amd64_write_pci_cfg(F3, NBCFG, value); } /* restore the NB Enable MCGCTL bit */ @@ -2435,9 +2325,9 @@ static bool ecc_enabled(struct pci_dev *F3, u8 nid) u8 ecc_en = 0; bool nb_mce_en = false; - amd64_read_pci_cfg(F3, K8_NBCFG, &value); + amd64_read_pci_cfg(F3, NBCFG, &value); - ecc_en = !!(value & K8_NBCFG_ECC_ENABLE); + ecc_en = !!(value & NBCFG_ECC_ENABLE); amd64_info("DRAM ECC %s.\n", (ecc_en ? "enabled" : "disabled")); nb_mce_en = amd64_nb_mce_bank_enabled_on_node(nid); @@ -2475,23 +2365,24 @@ static void set_mc_sysfs_attrs(struct mem_ctl_info *mci) mci->mc_driver_sysfs_attributes = sysfs_attrs; } -static void setup_mci_misc_attrs(struct mem_ctl_info *mci) +static void setup_mci_misc_attrs(struct mem_ctl_info *mci, + struct amd64_family_type *fam) { struct amd64_pvt *pvt = mci->pvt_info; mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; mci->edac_ctl_cap = EDAC_FLAG_NONE; - if (pvt->nbcap & K8_NBCAP_SECDED) + if (pvt->nbcap & NBCAP_SECDED) mci->edac_ctl_cap |= EDAC_FLAG_SECDED; - if (pvt->nbcap & K8_NBCAP_CHIPKILL) + if (pvt->nbcap & NBCAP_CHIPKILL) mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED; mci->edac_cap = amd64_determine_edac_cap(pvt); mci->mod_name = EDAC_MOD_STR; mci->mod_ver = EDAC_AMD64_VERSION; - mci->ctl_name = pvt->ctl_name; + mci->ctl_name = fam->ctl_name; mci->dev_name = pci_name(pvt->F2); mci->ctl_page_to_phys = NULL; @@ -2512,14 +2403,16 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt) case 0xf: fam_type = &amd64_family_types[K8_CPUS]; pvt->ops = &amd64_family_types[K8_CPUS].ops; - pvt->ctl_name = fam_type->ctl_name; - pvt->min_scrubrate = K8_MIN_SCRUB_RATE_BITS; break; + case 0x10: fam_type = &amd64_family_types[F10_CPUS]; pvt->ops = &amd64_family_types[F10_CPUS].ops; - pvt->ctl_name = fam_type->ctl_name; - pvt->min_scrubrate = F10_MIN_SCRUB_RATE_BITS; + break; + + case 0x15: + fam_type = &amd64_family_types[F15_CPUS]; + pvt->ops = &amd64_family_types[F15_CPUS].ops; break; default: @@ -2529,7 +2422,7 @@ static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt) pvt->ext_model = boot_cpu_data.x86_model >> 4; - amd64_info("%s %sdetected (node %d).\n", pvt->ctl_name, + amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name, (fam == 0xf ? (pvt->ext_model >= K8_REV_F ? "revF or later " : "revE or earlier ") @@ -2576,14 +2469,14 @@ static int amd64_init_one_instance(struct pci_dev *F2) goto err_siblings; ret = -ENOMEM; - mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, nid); + mci = edac_mc_alloc(0, pvt->csels[0].b_cnt, pvt->channel_count, nid); if (!mci) goto err_siblings; mci->pvt_info = pvt; mci->dev = &pvt->F2->dev; - setup_mci_misc_attrs(mci); + setup_mci_misc_attrs(mci, fam_type); if (init_csrows(mci)) mci->edac_cap = EDAC_FLAG_NONE; @@ -2726,6 +2619,15 @@ static const struct pci_device_id amd64_pci_table[] __devinitdata = { .class = 0, .class_mask = 0, }, + { + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_15H_NB_F2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + }, + {0, } }; MODULE_DEVICE_TABLE(pci, amd64_pci_table); @@ -2766,7 +2668,7 @@ static int __init amd64_edac_init(void) { int err = -ENODEV; - edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n"); + printk(KERN_INFO "AMD64 EDAC driver v%s\n", EDAC_AMD64_VERSION); opstate_init(); @@ -2777,7 +2679,7 @@ static int __init amd64_edac_init(void) mcis = kzalloc(amd_nb_num() * sizeof(mcis[0]), GFP_KERNEL); ecc_stngs = kzalloc(amd_nb_num() * sizeof(ecc_stngs[0]), GFP_KERNEL); if (!(mcis && ecc_stngs)) - goto err_ret; + goto err_free; msrs = msrs_alloc(); if (!msrs) diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 613ec72b0f6..11be36a311e 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -144,7 +144,7 @@ * sections 3.5.4 and 3.5.5 for more information. */ -#define EDAC_AMD64_VERSION "v3.3.0" +#define EDAC_AMD64_VERSION "3.4.0" #define EDAC_MOD_STR "amd64_edac" /* Extended Model from CPUID, for CPU Revision numbers */ @@ -153,85 +153,64 @@ #define K8_REV_F 4 /* Hardware limit on ChipSelect rows per MC and processors per system */ -#define MAX_CS_COUNT 8 -#define DRAM_REG_COUNT 8 +#define NUM_CHIPSELECTS 8 +#define DRAM_RANGES 8 #define ON true #define OFF false /* + * Create a contiguous bitmask starting at bit position @lo and ending at + * position @hi. For example + * + * GENMASK(21, 39) gives us the 64bit vector 0x000000ffffe00000. + */ +#define GENMASK(lo, hi) (((1ULL << ((hi) - (lo) + 1)) - 1) << (lo)) + +/* * PCI-defined configuration space registers */ +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 /* * Function 1 - Address Map */ -#define K8_DRAM_BASE_LOW 0x40 -#define K8_DRAM_LIMIT_LOW 0x44 -#define K8_DHAR 0xf0 - -#define DHAR_VALID BIT(0) -#define F10_DRAM_MEM_HOIST_VALID BIT(1) +#define DRAM_BASE_LO 0x40 +#define DRAM_LIMIT_LO 0x44 -#define DHAR_BASE_MASK 0xff000000 -#define dhar_base(dhar) (dhar & DHAR_BASE_MASK) +#define dram_intlv_en(pvt, i) ((u8)((pvt->ranges[i].base.lo >> 8) & 0x7)) +#define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3)) +#define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7)) +#define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7)) -#define K8_DHAR_OFFSET_MASK 0x0000ff00 -#define k8_dhar_offset(dhar) ((dhar & K8_DHAR_OFFSET_MASK) << 16) +#define DHAR 0xf0 +#define dhar_valid(pvt) ((pvt)->dhar & BIT(0)) +#define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1)) +#define dhar_base(pvt) ((pvt)->dhar & 0xff000000) +#define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16) -#define F10_DHAR_OFFSET_MASK 0x0000ff80 /* NOTE: Extra mask bit vs K8 */ -#define f10_dhar_offset(dhar) ((dhar & F10_DHAR_OFFSET_MASK) << 16) +#define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16) +#define DCT_CFG_SEL 0x10C -/* F10 High BASE/LIMIT registers */ -#define F10_DRAM_BASE_HIGH 0x140 -#define F10_DRAM_LIMIT_HIGH 0x144 +#define DRAM_BASE_HI 0x140 +#define DRAM_LIMIT_HI 0x144 /* * Function 2 - DRAM controller */ -#define K8_DCSB0 0x40 -#define F10_DCSB1 0x140 +#define DCSB0 0x40 +#define DCSB1 0x140 +#define DCSB_CS_ENABLE BIT(0) -#define K8_DCSB_CS_ENABLE BIT(0) -#define K8_DCSB_NPT_SPARE BIT(1) -#define K8_DCSB_NPT_TESTFAIL BIT(2) +#define DCSM0 0x60 +#define DCSM1 0x160 -/* - * REV E: select [31:21] and [15:9] from DCSB and the shift amount to form - * the address - */ -#define REV_E_DCSB_BASE_BITS (0xFFE0FE00ULL) -#define REV_E_DCS_SHIFT 4 - -#define REV_F_F1Xh_DCSB_BASE_BITS (0x1FF83FE0ULL) -#define REV_F_F1Xh_DCS_SHIFT 8 - -/* - * REV F and later: selects [28:19] and [13:5] from DCSB and the shift amount - * to form the address - */ -#define REV_F_DCSB_BASE_BITS (0x1FF83FE0ULL) -#define REV_F_DCS_SHIFT 8 - -/* DRAM CS Mask Registers */ -#define K8_DCSM0 0x60 -#define F10_DCSM1 0x160 - -/* REV E: select [29:21] and [15:9] from DCSM */ -#define REV_E_DCSM_MASK_BITS 0x3FE0FE00 - -/* unused bits [24:20] and [12:0] */ -#define REV_E_DCS_NOTUSED_BITS 0x01F01FFF - -/* REV F and later: select [28:19] and [13:5] from DCSM */ -#define REV_F_F1Xh_DCSM_MASK_BITS 0x1FF83FE0 - -/* unused bits [26:22] and [12:0] */ -#define REV_F_F1Xh_DCS_NOTUSED_BITS 0x07C01FFF +#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE) #define DBAM0 0x80 #define DBAM1 0x180 @@ -241,148 +220,84 @@ #define DBAM_MAX_VALUE 11 - -#define F10_DCLR_0 0x90 -#define F10_DCLR_1 0x190 +#define DCLR0 0x90 +#define DCLR1 0x190 #define REVE_WIDTH_128 BIT(16) -#define F10_WIDTH_128 BIT(11) +#define WIDTH_128 BIT(11) +#define DCHR0 0x94 +#define DCHR1 0x194 +#define DDR3_MODE BIT(8) -#define F10_DCHR_0 0x94 -#define F10_DCHR_1 0x194 +#define DCT_SEL_LO 0x110 +#define dct_sel_baseaddr(pvt) ((pvt)->dct_sel_lo & 0xFFFFF800) +#define dct_sel_interleave_addr(pvt) (((pvt)->dct_sel_lo >> 6) & 0x3) +#define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0)) +#define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2)) -#define F10_DCHR_FOUR_RANK_DIMM BIT(18) -#define DDR3_MODE BIT(8) -#define F10_DCHR_MblMode BIT(6) +#define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4))) +#define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5)) +#define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10)) -#define F10_DCTL_SEL_LOW 0x110 -#define dct_sel_baseaddr(pvt) ((pvt->dram_ctl_select_low) & 0xFFFFF800) -#define dct_sel_interleave_addr(pvt) (((pvt->dram_ctl_select_low) >> 6) & 0x3) -#define dct_high_range_enabled(pvt) (pvt->dram_ctl_select_low & BIT(0)) -#define dct_interleave_enabled(pvt) (pvt->dram_ctl_select_low & BIT(2)) -#define dct_ganging_enabled(pvt) (pvt->dram_ctl_select_low & BIT(4)) -#define dct_data_intlv_enabled(pvt) (pvt->dram_ctl_select_low & BIT(5)) -#define dct_dram_enabled(pvt) (pvt->dram_ctl_select_low & BIT(8)) -#define dct_memory_cleared(pvt) (pvt->dram_ctl_select_low & BIT(10)) +#define SWAP_INTLV_REG 0x10c -#define F10_DCTL_SEL_HIGH 0x114 +#define DCT_SEL_HI 0x114 /* * Function 3 - Misc Control */ -#define K8_NBCTL 0x40 - -/* Correctable ECC error reporting enable */ -#define K8_NBCTL_CECCEn BIT(0) - -/* UnCorrectable ECC error reporting enable */ -#define K8_NBCTL_UECCEn BIT(1) +#define NBCTL 0x40 -#define K8_NBCFG 0x44 -#define K8_NBCFG_CHIPKILL BIT(23) -#define K8_NBCFG_ECC_ENABLE BIT(22) +#define NBCFG 0x44 +#define NBCFG_CHIPKILL BIT(23) +#define NBCFG_ECC_ENABLE BIT(22) -#define K8_NBSL 0x48 - - -/* Family F10h: Normalized Extended Error Codes */ -#define F10_NBSL_EXT_ERR_RES 0x0 +/* F3x48: NBSL */ #define F10_NBSL_EXT_ERR_ECC 0x8 +#define NBSL_PP_OBS 0x2 -/* Next two are overloaded values */ -#define F10_NBSL_EXT_ERR_LINK_PROTO 0xB -#define F10_NBSL_EXT_ERR_L3_PROTO 0xB - -#define F10_NBSL_EXT_ERR_NB_ARRAY 0xC -#define F10_NBSL_EXT_ERR_DRAM_PARITY 0xD -#define F10_NBSL_EXT_ERR_LINK_RETRY 0xE - -/* Next two are overloaded values */ -#define F10_NBSL_EXT_ERR_GART_WALK 0xF -#define F10_NBSL_EXT_ERR_DEV_WALK 0xF - -/* 0x10 to 0x1B: Reserved */ -#define F10_NBSL_EXT_ERR_L3_DATA 0x1C -#define F10_NBSL_EXT_ERR_L3_TAG 0x1D -#define F10_NBSL_EXT_ERR_L3_LRU 0x1E - -/* K8: Normalized Extended Error Codes */ -#define K8_NBSL_EXT_ERR_ECC 0x0 -#define K8_NBSL_EXT_ERR_CRC 0x1 -#define K8_NBSL_EXT_ERR_SYNC 0x2 -#define K8_NBSL_EXT_ERR_MST 0x3 -#define K8_NBSL_EXT_ERR_TGT 0x4 -#define K8_NBSL_EXT_ERR_GART 0x5 -#define K8_NBSL_EXT_ERR_RMW 0x6 -#define K8_NBSL_EXT_ERR_WDT 0x7 -#define K8_NBSL_EXT_ERR_CHIPKILL_ECC 0x8 -#define K8_NBSL_EXT_ERR_DRAM_PARITY 0xD - -/* - * The following are for BUS type errors AFTER values have been normalized by - * shifting right - */ -#define K8_NBSL_PP_SRC 0x0 -#define K8_NBSL_PP_RES 0x1 -#define K8_NBSL_PP_OBS 0x2 -#define K8_NBSL_PP_GENERIC 0x3 - -#define EXTRACT_ERR_CPU_MAP(x) ((x) & 0xF) - -#define K8_NBEAL 0x50 -#define K8_NBEAH 0x54 -#define K8_SCRCTRL 0x58 - -#define F10_NB_CFG_LOW 0x88 +#define SCRCTRL 0x58 #define F10_ONLINE_SPARE 0xB0 -#define F10_ONLINE_SPARE_SWAPDONE0(x) ((x) & BIT(1)) -#define F10_ONLINE_SPARE_SWAPDONE1(x) ((x) & BIT(3)) -#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007) -#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007) +#define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1) +#define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7) #define F10_NB_ARRAY_ADDR 0xB8 - -#define F10_NB_ARRAY_DRAM_ECC 0x80000000 +#define F10_NB_ARRAY_DRAM_ECC BIT(31) /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */ #define SET_NB_ARRAY_ADDRESS(section) (((section) & 0x3) << 1) #define F10_NB_ARRAY_DATA 0xBC - #define SET_NB_DRAM_INJECTION_WRITE(word, bits) \ (BIT(((word) & 0xF) + 20) | \ BIT(17) | bits) - #define SET_NB_DRAM_INJECTION_READ(word, bits) \ (BIT(((word) & 0xF) + 20) | \ BIT(16) | bits) -#define K8_NBCAP 0xE8 -#define K8_NBCAP_CORES (BIT(12)|BIT(13)) -#define K8_NBCAP_CHIPKILL BIT(4) -#define K8_NBCAP_SECDED BIT(3) -#define K8_NBCAP_DCT_DUAL BIT(0) +#define NBCAP 0xE8 +#define NBCAP_CHIPKILL BIT(4) +#define NBCAP_SECDED BIT(3) +#define NBCAP_DCT_DUAL BIT(0) #define EXT_NB_MCA_CFG 0x180 /* MSRs */ -#define K8_MSR_MCGCTL_NBE BIT(4) - -#define K8_MSR_MC4CTL 0x0410 -#define K8_MSR_MC4STAT 0x0411 -#define K8_MSR_MC4ADDR 0x0412 +#define MSR_MCGCTL_NBE BIT(4) /* AMD sets the first MC device at device ID 0x18. */ -static inline int get_node_id(struct pci_dev *pdev) +static inline u8 get_node_id(struct pci_dev *pdev) { return PCI_SLOT(pdev->devfn) - 0x18; } -enum amd64_chipset_families { +enum amd_families { K8_CPUS = 0, F10_CPUS, + F15_CPUS, + NUM_FAMILIES, }; /* Error injection control structure */ @@ -392,13 +307,35 @@ struct error_injection { u32 bit_map; }; +/* low and high part of PCI config space regs */ +struct reg_pair { + u32 lo, hi; +}; + +/* + * See F1x[1, 0][7C:40] DRAM Base/Limit Registers + */ +struct dram_range { + struct reg_pair base; + struct reg_pair lim; +}; + +/* A DCT chip selects collection */ +struct chip_select { + u32 csbases[NUM_CHIPSELECTS]; + u8 b_cnt; + + u32 csmasks[NUM_CHIPSELECTS]; + u8 m_cnt; +}; + struct amd64_pvt { struct low_ops *ops; /* pci_device handles which we utilize */ struct pci_dev *F1, *F2, *F3; - int mc_node_id; /* MC index of this MC node */ + unsigned mc_node_id; /* MC index of this MC node */ int ext_model; /* extended model value of this node */ int channel_count; @@ -414,60 +351,50 @@ struct amd64_pvt { u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */ u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */ - /* DRAM CS Base Address Registers F2x[1,0][5C:40] */ - u32 dcsb0[MAX_CS_COUNT]; - u32 dcsb1[MAX_CS_COUNT]; - - /* DRAM CS Mask Registers F2x[1,0][6C:60] */ - u32 dcsm0[MAX_CS_COUNT]; - u32 dcsm1[MAX_CS_COUNT]; - - /* - * Decoded parts of DRAM BASE and LIMIT Registers - * F1x[78,70,68,60,58,50,48,40] - */ - u64 dram_base[DRAM_REG_COUNT]; - u64 dram_limit[DRAM_REG_COUNT]; - u8 dram_IntlvSel[DRAM_REG_COUNT]; - u8 dram_IntlvEn[DRAM_REG_COUNT]; - u8 dram_DstNode[DRAM_REG_COUNT]; - u8 dram_rw_en[DRAM_REG_COUNT]; - - /* - * The following fields are set at (load) run time, after CPU revision - * has been determined, since the dct_base and dct_mask registers vary - * based on revision - */ - u32 dcsb_base; /* DCSB base bits */ - u32 dcsm_mask; /* DCSM mask bits */ - u32 cs_count; /* num chip selects (== num DCSB registers) */ - u32 num_dcsm; /* Number of DCSM registers */ - u32 dcs_mask_notused; /* DCSM notused mask bits */ - u32 dcs_shift; /* DCSB and DCSM shift value */ + /* one for each DCT */ + struct chip_select csels[2]; + + /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */ + struct dram_range ranges[DRAM_RANGES]; u64 top_mem; /* top of memory below 4GB */ u64 top_mem2; /* top of memory above 4GB */ - u32 dram_ctl_select_low; /* DRAM Controller Select Low Reg */ - u32 dram_ctl_select_high; /* DRAM Controller Select High Reg */ - u32 online_spare; /* On-Line spare Reg */ + u32 dct_sel_lo; /* DRAM Controller Select Low */ + u32 dct_sel_hi; /* DRAM Controller Select High */ + u32 online_spare; /* On-Line spare Reg */ /* x4 or x8 syndromes in use */ - u8 syn_type; - - /* temp storage for when input is received from sysfs */ - struct err_regs ctl_error_info; + u8 ecc_sym_sz; /* place to store error injection parameters prior to issue */ struct error_injection injection; +}; - /* DCT per-family scrubrate setting */ - u32 min_scrubrate; +static inline u64 get_dram_base(struct amd64_pvt *pvt, unsigned i) +{ + u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8; - /* family name this instance is running on */ - const char *ctl_name; + if (boot_cpu_data.x86 == 0xf) + return addr; -}; + return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr; +} + +static inline u64 get_dram_limit(struct amd64_pvt *pvt, unsigned i) +{ + u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff; + + if (boot_cpu_data.x86 == 0xf) + return lim; + + return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim; +} + +static inline u16 extract_syndrome(u64 status) +{ + return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00); +} /* * per-node ECC settings descriptor @@ -482,14 +409,6 @@ struct ecc_settings { } flags; }; -extern const char *tt_msgs[4]; -extern const char *ll_msgs[4]; -extern const char *rrrr_msgs[16]; -extern const char *to_msgs[2]; -extern const char *pp_msgs[4]; -extern const char *ii_msgs[4]; -extern const char *htlink_msgs[8]; - #ifdef CONFIG_EDAC_DEBUG #define NUM_DBG_ATTRS 5 #else @@ -511,14 +430,11 @@ extern struct mcidev_sysfs_attribute amd64_dbg_attrs[NUM_DBG_ATTRS], */ struct low_ops { int (*early_channel_count) (struct amd64_pvt *pvt); - - u64 (*get_error_address) (struct mem_ctl_info *mci, - struct err_regs *info); - void (*read_dram_base_limit) (struct amd64_pvt *pvt, int dram); - void (*read_dram_ctl_register) (struct amd64_pvt *pvt); - void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, - struct err_regs *info, u64 SystemAddr); - int (*dbam_to_cs) (struct amd64_pvt *pvt, int cs_mode); + void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr, + u16 syndrome); + int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode); + int (*read_dct_pci_cfg) (struct amd64_pvt *pvt, int offset, + u32 *val, const char *func); }; struct amd64_family_type { @@ -527,28 +443,17 @@ struct amd64_family_type { struct low_ops ops; }; -static inline int amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, - u32 *val, const char *func) -{ - int err = 0; - - err = pci_read_config_dword(pdev, offset, val); - if (err) - amd64_warn("%s: error reading F%dx%x.\n", - func, PCI_FUNC(pdev->devfn), offset); - - return err; -} +int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 val, const char *func); #define amd64_read_pci_cfg(pdev, offset, val) \ - amd64_read_pci_cfg_dword(pdev, offset, val, __func__) + __amd64_read_pci_cfg_dword(pdev, offset, val, __func__) -/* - * For future CPU versions, verify the following as new 'slow' rates appear and - * modify the necessary skip values for the supported CPU. - */ -#define K8_MIN_SCRUB_RATE_BITS 0x0 -#define F10_MIN_SCRUB_RATE_BITS 0x5 +#define amd64_write_pci_cfg(pdev, offset, val) \ + __amd64_write_pci_cfg_dword(pdev, offset, val, __func__) + +#define amd64_read_dct_pci_cfg(pvt, offset, val) \ + pvt->ops->read_dct_pci_cfg(pvt, offset, val, __func__) int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, u64 *hole_offset, u64 *hole_size); diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c index 688478de1cb..303f10e03dd 100644 --- a/drivers/edac/amd64_edac_inj.c +++ b/drivers/edac/amd64_edac_inj.c @@ -117,13 +117,13 @@ static ssize_t amd64_inject_read_store(struct mem_ctl_info *mci, /* Form value to choose 16-byte section of cacheline */ section = F10_NB_ARRAY_DRAM_ECC | SET_NB_ARRAY_ADDRESS(pvt->injection.section); - pci_write_config_dword(pvt->F3, F10_NB_ARRAY_ADDR, section); + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section); word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection.word, pvt->injection.bit_map); /* Issue 'word' and 'bit' along with the READ request */ - pci_write_config_dword(pvt->F3, F10_NB_ARRAY_DATA, word_bits); + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits); debugf0("section=0x%x word_bits=0x%x\n", section, word_bits); @@ -150,13 +150,13 @@ static ssize_t amd64_inject_write_store(struct mem_ctl_info *mci, /* Form value to choose 16-byte section of cacheline */ section = F10_NB_ARRAY_DRAM_ECC | SET_NB_ARRAY_ADDRESS(pvt->injection.section); - pci_write_config_dword(pvt->F3, F10_NB_ARRAY_ADDR, section); + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section); word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection.word, pvt->injection.bit_map); /* Issue 'word' and 'bit' along with the READ request */ - pci_write_config_dword(pvt->F3, F10_NB_ARRAY_DATA, word_bits); + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits); debugf0("section=0x%x word_bits=0x%x\n", section, word_bits); diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c index b9a781c47e3..837ad8f85b4 100644 --- a/drivers/edac/cpc925_edac.c +++ b/drivers/edac/cpc925_edac.c @@ -817,7 +817,7 @@ static void cpc925_del_edac_devices(void) } } -/* Convert current back-ground scrub rate into byte/sec bandwith */ +/* Convert current back-ground scrub rate into byte/sec bandwidth */ static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci) { struct cpc925_mc_pdata *pdata = mci->pvt_info; diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 3d965347a67..eefa3501916 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -164,7 +164,7 @@ enum mem_type { /* chipset Error Detection and Correction capabilities and mode */ enum edac_type { EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ - EDAC_NONE, /* Doesnt support ECC */ + EDAC_NONE, /* Doesn't support ECC */ EDAC_RESERVED, /* Reserved ECC type */ EDAC_PARITY, /* Detects parity errors */ EDAC_EC, /* Error Checking - no correction */ @@ -233,7 +233,7 @@ enum scrub_type { * of these in parallel provides 64 bits which is common * for a memory stick. * - * Memory Stick: A printed circuit board that agregates multiple + * Memory Stick: A printed circuit board that aggregates multiple * memory devices in parallel. This is the atomic * memory component that is purchaseable by Joe consumer * and loaded into a memory socket. @@ -385,7 +385,7 @@ struct mem_ctl_info { /* Get the current sdram memory scrub rate from the internal representation and converts it to the closest matching - bandwith in bytes/sec. + bandwidth in bytes/sec. */ int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci); @@ -823,7 +823,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, * There are a limited number of error logging registers that can * be exausted. When all registers are exhausted and an additional * error occurs then an error overflow register records that an - * error occured and the type of error, but doesn't have any + * error occurred and the type of error, but doesn't have any * further information. The ce/ue versions make for cleaner * reporting logic and function interface - reduces conditional * statement clutter and extra function arguments. diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c index d5e13c94714..a7408cf86f3 100644 --- a/drivers/edac/edac_device.c +++ b/drivers/edac/edac_device.c @@ -672,7 +672,7 @@ void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, block->counters.ce_count++; } - /* Propogate the count up the 'totals' tree */ + /* Propagate the count up the 'totals' tree */ instance->counters.ce_count++; edac_dev->counters.ce_count++; @@ -718,7 +718,7 @@ void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, block->counters.ue_count++; } - /* Propogate the count up the 'totals' tree */ + /* Propagate the count up the 'totals' tree */ instance->counters.ue_count++; edac_dev->counters.ue_count++; diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 400de071cab..86649df0028 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -533,7 +533,7 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, memset(&block->kobj, 0, sizeof(struct kobject)); /* bump the main kobject's reference count for this controller - * and this instance is dependant on the main + * and this instance is dependent on the main */ main_kobj = kobject_get(&edac_dev->kobj); if (!main_kobj) { @@ -635,7 +635,7 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, instance->ctl = edac_dev; /* bump the main kobject's reference count for this controller - * and this instance is dependant on the main + * and this instance is dependent on the main */ main_kobj = kobject_get(&edac_dev->kobj); if (!main_kobj) { diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index a4e9db2d652..1d805604907 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -724,7 +724,7 @@ void edac_mc_handle_ce(struct mem_ctl_info *mci, * Some MC's can remap memory so that it is still available * at a different address when PCI devices map into memory. * MC's that can't do this lose the memory where PCI devices - * are mapped. This mapping is MC dependant and so we call + * are mapped. This mapping is MC dependent and so we call * back into the MC driver for it to map the MC page to * a physical (CPU) page which can then be mapped to a virtual * page - which can then be scrubbed. diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 39d97cfdf58..26343fd4659 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -785,10 +785,10 @@ static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci, { int err; - debugf1("%s()\n", __func__); + debugf4("%s()\n", __func__); while (sysfs_attrib) { - debugf1("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib); + debugf4("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib); if (sysfs_attrib->grp) { struct mcidev_sysfs_group_kobj *grp_kobj; @@ -818,7 +818,7 @@ static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci, if (err < 0) return err; } else if (sysfs_attrib->attr.name) { - debugf0("%s() file %s\n", __func__, + debugf4("%s() file %s\n", __func__, sysfs_attrib->attr.name); err = sysfs_create_file(kobj, &sysfs_attrib->attr); @@ -850,29 +850,29 @@ static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci, /* * loop if there are attributes and until we hit a NULL entry - * Remove first all the atributes + * Remove first all the attributes */ while (sysfs_attrib) { - debugf1("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib); + debugf4("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib); if (sysfs_attrib->grp) { - debugf1("%s() seeking for group %s\n", + debugf4("%s() seeking for group %s\n", __func__, sysfs_attrib->grp->name); list_for_each_entry(grp_kobj, &mci->grp_kobj_list, list) { - debugf1("%s() grp_kobj->grp = %p\n",__func__, grp_kobj->grp); + debugf4("%s() grp_kobj->grp = %p\n",__func__, grp_kobj->grp); if (grp_kobj->grp == sysfs_attrib->grp) { edac_remove_mci_instance_attributes(mci, grp_kobj->grp->mcidev_attr, &grp_kobj->kobj, count + 1); - debugf0("%s() group %s\n", __func__, + debugf4("%s() group %s\n", __func__, sysfs_attrib->grp->name); kobject_put(&grp_kobj->kobj); } } - debugf1("%s() end of seeking for group %s\n", + debugf4("%s() end of seeking for group %s\n", __func__, sysfs_attrib->grp->name); } else if (sysfs_attrib->attr.name) { - debugf0("%s() file %s\n", __func__, + debugf4("%s() file %s\n", __func__, sysfs_attrib->attr.name); sysfs_remove_file(kobj, &sysfs_attrib->attr); } else @@ -979,7 +979,7 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) debugf0("%s()\n", __func__); /* remove all csrow kobjects */ - debugf0("%s() unregister this mci kobj\n", __func__); + debugf4("%s() unregister this mci kobj\n", __func__); for (i = 0; i < mci->nr_csrows; i++) { if (mci->csrows[i].nr_pages > 0) { debugf0("%s() unreg csrow-%d\n", __func__, i); @@ -989,18 +989,18 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) /* remove this mci instance's attribtes */ if (mci->mc_driver_sysfs_attributes) { - debugf0("%s() unregister mci private attributes\n", __func__); + debugf4("%s() unregister mci private attributes\n", __func__); edac_remove_mci_instance_attributes(mci, mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0); } /* remove the symlink */ - debugf0("%s() remove_link\n", __func__); + debugf4("%s() remove_link\n", __func__); sysfs_remove_link(&mci->edac_mci_kobj, EDAC_DEVICE_SYMLINK); /* unregister this instance's kobject */ - debugf0("%s() remove_mci_instance\n", __func__); + debugf4("%s() remove_mci_instance\n", __func__); kobject_put(&mci->edac_mci_kobj); } diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index 023b01cb517..495198ad059 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -352,7 +352,7 @@ static int edac_pci_main_kobj_setup(void) return 0; /* First time, so create the main kobject and its - * controls and atributes + * controls and attributes */ edac_class = edac_get_sysfs_class(); if (edac_class == NULL) { @@ -551,7 +551,7 @@ static void edac_pci_dev_parity_clear(struct pci_dev *dev) /* * PCI Parity polling * - * Fucntion to retrieve the current parity status + * Function to retrieve the current parity status * and decode it * */ diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index a5cefab8d65..87f427c2ce5 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1372,7 +1372,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this - * allows the driver to support upto the chipset max, without + * allows the driver to support up to the chipset max, without * some fancy mobo determination. */ i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c index 0448da0af75..bcbdeeca48b 100644 --- a/drivers/edac/i5100_edac.c +++ b/drivers/edac/i5100_edac.c @@ -11,7 +11,7 @@ * * The intel 5100 has two independent channels. EDAC core currently * can not reflect this configuration so instead the chip-select - * rows for each respective channel are layed out one after another, + * rows for each respective channel are laid out one after another, * the first half belonging to channel 0, the second half belonging * to channel 1. */ diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c index 38a9be9e1c7..80a465efbae 100644 --- a/drivers/edac/i5400_edac.c +++ b/drivers/edac/i5400_edac.c @@ -648,7 +648,7 @@ static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci, return; } - /* Miscelaneous errors */ + /* Miscellaneous errors */ errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); branch = extract_fbdchan_indx(info->ferr_nf_fbd); @@ -1240,7 +1240,7 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx) * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this - * allows the driver to support upto the chipset max, without + * allows the driver to support up to the chipset max, without * some fancy mobo determination. */ num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL; diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index 05523b50427..363cc160294 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -162,7 +162,7 @@ static struct edac_pci_ctl_info *i7300_pci; #define AMBPRESENT_0 0x64 #define AMBPRESENT_1 0x66 -const static u16 mtr_regs[MAX_SLOTS] = { +static const u16 mtr_regs[MAX_SLOTS] = { 0x80, 0x84, 0x88, 0x8c, 0x82, 0x86, 0x8a, 0x8e }; @@ -1065,7 +1065,7 @@ static int __devinit i7300_init_one(struct pci_dev *pdev, * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this - * allows the driver to support upto the chipset max, without + * allows the driver to support up to the chipset max, without * some fancy mobo determination. */ num_dimms_per_channel = MAX_SLOTS; diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 81154ab296b..465cbc25149 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1772,7 +1772,7 @@ static void i7core_check_error(struct mem_ctl_info *mci) /* * MCE first step: Copy all mce errors into a temporary buffer * We use a double buffering here, to reduce the risk of - * loosing an error. + * losing an error. */ smp_rmb(); count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in) diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c index 678405ab04e..4329d39f902 100644 --- a/drivers/edac/i82443bxgx_edac.c +++ b/drivers/edac/i82443bxgx_edac.c @@ -203,7 +203,7 @@ static void i82443bxgx_init_csrows(struct mem_ctl_info *mci, row_high_limit = ((u32) drbar << 23); /* find the DRAM Chip Select Base address and mask */ debugf1("MC%d: %s: %s() Row=%d, " - "Boundry Address=%#0x, Last = %#0x\n", + "Boundary Address=%#0x, Last = %#0x\n", mci->mc_idx, __FILE__, __func__, index, row_high_limit, row_high_limit_last); @@ -305,7 +305,7 @@ static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx) i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype); /* Many BIOSes don't clear error flags on boot, so do this - * here, or we get "phantom" errors occuring at module-load + * here, or we get "phantom" errors occurring at module-load * time. */ pci_write_bits32(pdev, I82443BXGX_EAP, (I82443BXGX_EAP_OFFSET_SBE | diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c index 3218819b728..92e65e7038e 100644 --- a/drivers/edac/i82975x_edac.c +++ b/drivers/edac/i82975x_edac.c @@ -160,8 +160,8 @@ NOTE: Only ONE of the three must be enabled * 3:2 Rank 1 architecture * 1:0 Rank 0 architecture * - * 00 => x16 devices; i.e 4 banks - * 01 => x8 devices; i.e 8 banks + * 00 => 4 banks + * 01 => 8 banks */ #define I82975X_C0BNKARC 0x10e #define I82975X_C1BNKARC 0x18e @@ -278,6 +278,7 @@ static int i82975x_process_error_info(struct mem_ctl_info *mci, struct i82975x_error_info *info, int handle_errors) { int row, multi_chan, chan; + unsigned long offst, page; multi_chan = mci->csrows[0].nr_channels - 1; @@ -292,17 +293,19 @@ static int i82975x_process_error_info(struct mem_ctl_info *mci, info->errsts = info->errsts2; } - chan = info->eap & 1; - info->eap >>= 1; - if (info->xeap ) - info->eap |= 0x80000000; - info->eap >>= PAGE_SHIFT; - row = edac_mc_find_csrow_by_page(mci, info->eap); + page = (unsigned long) info->eap; + if (info->xeap & 1) + page |= 0x100000000ul; + chan = page & 1; + page >>= 1; + offst = page & ((1 << PAGE_SHIFT) - 1); + page >>= PAGE_SHIFT; + row = edac_mc_find_csrow_by_page(mci, page); if (info->errsts & 0x0002) - edac_mc_handle_ue(mci, info->eap, 0, row, "i82975x UE"); + edac_mc_handle_ue(mci, page, offst , row, "i82975x UE"); else - edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, + edac_mc_handle_ce(mci, page, offst, info->derrsyn, row, multi_chan ? chan : 0, "i82975x CE"); @@ -344,11 +347,7 @@ static int dual_channel_active(void __iomem *mch_window) static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) { /* - * ASUS P5W DH either does not program this register or programs - * it wrong! - * ECC is possible on i92975x ONLY with DEV_X8 which should mean 'val' - * for each rank should be 01b - the LSB of the word should be 0x55; - * but it reads 0! + * ECC is possible on i92975x ONLY with DEV_X8 */ return DEV_X8; } @@ -356,11 +355,15 @@ static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) static void i82975x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, void __iomem *mch_window) { + static const char *labels[4] = { + "DIMM A1", "DIMM A2", + "DIMM B1", "DIMM B2" + }; struct csrow_info *csrow; unsigned long last_cumul_size; u8 value; u32 cumul_size; - int index; + int index, chan; last_cumul_size = 0; @@ -369,11 +372,7 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci, * The dram row boundary (DRB) reg values are boundary address * for each DRAM row with a granularity of 32 or 64MB (single/dual * channel operation). DRB regs are cumulative; therefore DRB7 will - * contain the total memory contained in all eight rows. - * - * FIXME: - * EDAC currently works for Dual-channel Interleaved configuration. - * Other configurations, which the chip supports, need fixing/testing. + * contain the total memory contained in all rows. * */ @@ -384,8 +383,26 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci, ((index >= 4) ? 0x80 : 0)); cumul_size = value; cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT); + /* + * Adjust cumul_size w.r.t number of channels + * + */ + if (csrow->nr_channels > 1) + cumul_size <<= 1; debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, cumul_size); + + /* + * Initialise dram labels + * index values: + * [0-7] for single-channel; i.e. csrow->nr_channels = 1 + * [0-3] for dual-channel; i.e. csrow->nr_channels = 2 + */ + for (chan = 0; chan < csrow->nr_channels; chan++) + strncpy(csrow->channels[chan].label, + labels[(index >> 1) + (chan * 2)], + EDAC_MC_LABEL_LEN); + if (cumul_size == last_cumul_size) continue; /* not populated */ @@ -393,8 +410,8 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci, csrow->last_page = cumul_size - 1; csrow->nr_pages = cumul_size - last_cumul_size; last_cumul_size = cumul_size; - csrow->grain = 1 << 7; /* I82975X_EAP has 128B resolution */ - csrow->mtype = MEM_DDR; /* i82975x supports only DDR2 */ + csrow->grain = 1 << 6; /* I82975X_EAP has 64B resolution */ + csrow->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ csrow->dtype = i82975x_dram_type(mch_window, index); csrow->edac_mode = EDAC_SECDED; /* only supported */ } @@ -515,18 +532,20 @@ static int i82975x_probe1(struct pci_dev *pdev, int dev_idx) debugf3("%s(): init mci\n", __func__); mci->dev = &pdev->dev; - mci->mtype_cap = MEM_FLAG_DDR; + mci->mtype_cap = MEM_FLAG_DDR2; mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; mci->mod_name = EDAC_MOD_STR; mci->mod_ver = I82975X_REVISION; mci->ctl_name = i82975x_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); mci->edac_check = i82975x_check; mci->ctl_page_to_phys = NULL; debugf3("%s(): init pvt\n", __func__); pvt = (struct i82975x_pvt *) mci->pvt_info; pvt->mch_window = mch_window; i82975x_init_csrows(mci, pdev, mch_window); + mci->scrub_mode = SCRUB_HW_SRC; i82975x_get_error_info(mci, &discard); /* clear counters */ /* finalize this instance of memory controller with edac core */ @@ -664,7 +683,7 @@ module_init(i82975x_init); module_exit(i82975x_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Arvind R. <arvind@acarlab.com>"); +MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>"); MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); module_param(edac_op_state, int, 0444); diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c index f6cf73d9335..795cfbc0bf5 100644 --- a/drivers/edac/mce_amd.c +++ b/drivers/edac/mce_amd.c @@ -594,6 +594,7 @@ static bool nb_noop_mce(u16 ec, u8 xec) void amd_decode_nb_mce(int node_id, struct mce *m, u32 nbcfg) { + struct cpuinfo_x86 *c = &boot_cpu_data; u16 ec = EC(m->status); u8 xec = XEC(m->status, 0x1f); u32 nbsh = (u32)(m->status >> 32); @@ -602,9 +603,8 @@ void amd_decode_nb_mce(int node_id, struct mce *m, u32 nbcfg) pr_emerg(HW_ERR "Northbridge Error (node %d", node_id); /* F10h, revD can disable ErrCpu[3:0] through ErrCpuVal */ - if ((boot_cpu_data.x86 == 0x10) && - (boot_cpu_data.x86_model > 7)) { - if (nbsh & K8_NBSH_ERR_CPU_VAL) + if (c->x86 == 0x10 && c->x86_model > 7) { + if (nbsh & NBSH_ERR_CPU_VAL) core = nbsh & nb_err_cpumask; } else { u8 assoc_cpus = nbsh & nb_err_cpumask; @@ -646,7 +646,7 @@ void amd_decode_nb_mce(int node_id, struct mce *m, u32 nbcfg) if (!fam_ops->nb_mce(ec, xec)) goto wrong_nb_mce; - if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10) + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x15) if ((xec == 0x8 || xec == 0x0) && nb_bus_decoder) nb_bus_decoder(node_id, m, nbcfg); diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h index 45dda47173f..795a3206acf 100644 --- a/drivers/edac/mce_amd.h +++ b/drivers/edac/mce_amd.h @@ -31,19 +31,10 @@ #define R4(x) (((x) >> 4) & 0xf) #define R4_MSG(x) ((R4(x) < 9) ? rrrr_msgs[R4(x)] : "Wrong R4!") -#define K8_NBSH 0x4C - -#define K8_NBSH_VALID_BIT BIT(31) -#define K8_NBSH_OVERFLOW BIT(30) -#define K8_NBSH_UC_ERR BIT(29) -#define K8_NBSH_ERR_EN BIT(28) -#define K8_NBSH_MISCV BIT(27) -#define K8_NBSH_VALID_ERROR_ADDR BIT(26) -#define K8_NBSH_PCC BIT(25) -#define K8_NBSH_ERR_CPU_VAL BIT(24) -#define K8_NBSH_CECC BIT(14) -#define K8_NBSH_UECC BIT(13) -#define K8_NBSH_ERR_SCRUBER BIT(8) +/* + * F3x4C bits (MCi_STATUS' high half) + */ +#define NBSH_ERR_CPU_VAL BIT(24) enum tt_ids { TT_INSTR = 0, @@ -86,17 +77,6 @@ extern const char *to_msgs[]; extern const char *ii_msgs[]; /* - * relevant NB regs - */ -struct err_regs { - u32 nbcfg; - u32 nbsh; - u32 nbsl; - u32 nbeah; - u32 nbeal; -}; - -/* * per-family decoder ops */ struct amd_decoder_ops { diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c index 733a7e7a8d6..a4987e03f59 100644 --- a/drivers/edac/mce_amd_inj.c +++ b/drivers/edac/mce_amd_inj.c @@ -90,7 +90,7 @@ static ssize_t edac_inject_bank_store(struct kobject *kobj, if (value > 5) if (boot_cpu_data.x86 != 0x15 || value > 6) { - printk(KERN_ERR "Non-existant MCE bank: %lu\n", value); + printk(KERN_ERR "Non-existent MCE bank: %lu\n", value); return -EINVAL; } diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index b123bb308a4..38ab8e2cd7f 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -200,8 +200,7 @@ static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int __devinit mpc85xx_pci_err_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit mpc85xx_pci_err_probe(struct platform_device *op) { struct edac_pci_ctl_info *pci; struct mpc85xx_pci_pdata *pdata; @@ -338,7 +337,7 @@ static struct of_device_id mpc85xx_pci_err_of_match[] = { }; MODULE_DEVICE_TABLE(of, mpc85xx_pci_err_of_match); -static struct of_platform_driver mpc85xx_pci_err_driver = { +static struct platform_driver mpc85xx_pci_err_driver = { .probe = mpc85xx_pci_err_probe, .remove = __devexit_p(mpc85xx_pci_err_remove), .driver = { @@ -503,8 +502,7 @@ static irqreturn_t mpc85xx_l2_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int __devinit mpc85xx_l2_err_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit mpc85xx_l2_err_probe(struct platform_device *op) { struct edac_device_ctl_info *edac_dev; struct mpc85xx_l2_pdata *pdata; @@ -656,7 +654,7 @@ static struct of_device_id mpc85xx_l2_err_of_match[] = { }; MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match); -static struct of_platform_driver mpc85xx_l2_err_driver = { +static struct platform_driver mpc85xx_l2_err_driver = { .probe = mpc85xx_l2_err_probe, .remove = mpc85xx_l2_err_remove, .driver = { @@ -956,8 +954,7 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci) } } -static int __devinit mpc85xx_mc_err_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit mpc85xx_mc_err_probe(struct platform_device *op) { struct mem_ctl_info *mci; struct mpc85xx_mc_pdata *pdata; @@ -1136,7 +1133,7 @@ static struct of_device_id mpc85xx_mc_err_of_match[] = { }; MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); -static struct of_platform_driver mpc85xx_mc_err_driver = { +static struct platform_driver mpc85xx_mc_err_driver = { .probe = mpc85xx_mc_err_probe, .remove = mpc85xx_mc_err_remove, .driver = { @@ -1150,13 +1147,14 @@ static struct of_platform_driver mpc85xx_mc_err_driver = { static void __init mpc85xx_mc_clear_rfxe(void *data) { orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1); - mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000)); + mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~HID1_RFXE)); } #endif static int __init mpc85xx_mc_init(void) { int res = 0; + u32 pvr = 0; printk(KERN_INFO "Freescale(R) MPC85xx EDAC driver, " "(C) 2006 Montavista Software\n"); @@ -1171,27 +1169,32 @@ static int __init mpc85xx_mc_init(void) break; } - res = of_register_platform_driver(&mpc85xx_mc_err_driver); + res = platform_driver_register(&mpc85xx_mc_err_driver); if (res) printk(KERN_WARNING EDAC_MOD_STR "MC fails to register\n"); - res = of_register_platform_driver(&mpc85xx_l2_err_driver); + res = platform_driver_register(&mpc85xx_l2_err_driver); if (res) printk(KERN_WARNING EDAC_MOD_STR "L2 fails to register\n"); #ifdef CONFIG_PCI - res = of_register_platform_driver(&mpc85xx_pci_err_driver); + res = platform_driver_register(&mpc85xx_pci_err_driver); if (res) printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n"); #endif #ifdef CONFIG_FSL_SOC_BOOKE - /* - * need to clear HID1[RFXE] to disable machine check int - * so we can catch it - */ - if (edac_op_state == EDAC_OPSTATE_INT) - on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0); + pvr = mfspr(SPRN_PVR); + + if ((PVR_VER(pvr) == PVR_VER_E500V1) || + (PVR_VER(pvr) == PVR_VER_E500V2)) { + /* + * need to clear HID1[RFXE] to disable machine check int + * so we can catch it + */ + if (edac_op_state == EDAC_OPSTATE_INT) + on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0); + } #endif return 0; @@ -1209,13 +1212,18 @@ static void __exit mpc85xx_mc_restore_hid1(void *data) static void __exit mpc85xx_mc_exit(void) { #ifdef CONFIG_FSL_SOC_BOOKE - on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0); + u32 pvr = mfspr(SPRN_PVR); + + if ((PVR_VER(pvr) == PVR_VER_E500V1) || + (PVR_VER(pvr) == PVR_VER_E500V2)) { + on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0); + } #endif #ifdef CONFIG_PCI - of_unregister_platform_driver(&mpc85xx_pci_err_driver); + platform_driver_unregister(&mpc85xx_pci_err_driver); #endif - of_unregister_platform_driver(&mpc85xx_l2_err_driver); - of_unregister_platform_driver(&mpc85xx_mc_err_driver); + platform_driver_unregister(&mpc85xx_l2_err_driver); + platform_driver_unregister(&mpc85xx_mc_err_driver); } module_exit(mpc85xx_mc_exit); diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c index b9f0c20df1a..c1f0045ceb8 100644 --- a/drivers/edac/ppc4xx_edac.c +++ b/drivers/edac/ppc4xx_edac.c @@ -184,8 +184,7 @@ struct ppc4xx_ecc_status { /* Function Prototypes */ -static int ppc4xx_edac_probe(struct platform_device *device, - const struct of_device_id *device_id); +static int ppc4xx_edac_probe(struct platform_device *device) static int ppc4xx_edac_remove(struct platform_device *device); /* Global Variables */ @@ -201,7 +200,7 @@ static struct of_device_id ppc4xx_edac_match[] = { { } }; -static struct of_platform_driver ppc4xx_edac_driver = { +static struct platform_driver ppc4xx_edac_driver = { .probe = ppc4xx_edac_probe, .remove = ppc4xx_edac_remove, .driver = { @@ -997,9 +996,6 @@ ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1) * initialized. * @op: A pointer to the OpenFirmware device tree node associated * with the controller this EDAC instance is bound to. - * @match: A pointer to the OpenFirmware device tree match - * information associated with the controller this EDAC instance - * is bound to. * @dcr_host: A pointer to the DCR data containing the DCR mapping * for this controller instance. * @mcopt1: The 32-bit Memory Controller Option 1 register value @@ -1015,7 +1011,6 @@ ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1) static int __devinit ppc4xx_edac_mc_init(struct mem_ctl_info *mci, struct platform_device *op, - const struct of_device_id *match, const dcr_host_t *dcr_host, u32 mcopt1) { @@ -1024,7 +1019,7 @@ ppc4xx_edac_mc_init(struct mem_ctl_info *mci, struct ppc4xx_edac_pdata *pdata = NULL; const struct device_node *np = op->dev.of_node; - if (match == NULL) + if (op->dev.of_match == NULL) return -EINVAL; /* Initial driver pointers and private data */ @@ -1227,9 +1222,6 @@ ppc4xx_edac_map_dcrs(const struct device_node *np, dcr_host_t *dcr_host) * ppc4xx_edac_probe - check controller and bind driver * @op: A pointer to the OpenFirmware device tree node associated * with the controller being probed for driver binding. - * @match: A pointer to the OpenFirmware device tree match - * information associated with the controller being probed - * for driver binding. * * This routine probes a specific ibm,sdram-4xx-ddr2 controller * instance for binding with the driver. @@ -1237,8 +1229,7 @@ ppc4xx_edac_map_dcrs(const struct device_node *np, dcr_host_t *dcr_host) * Returns 0 if the controller instance was successfully bound to the * driver; otherwise, < 0 on error. */ -static int __devinit -ppc4xx_edac_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit ppc4xx_edac_probe(struct platform_device *op) { int status = 0; u32 mcopt1, memcheck; @@ -1304,7 +1295,7 @@ ppc4xx_edac_probe(struct platform_device *op, const struct of_device_id *match) goto done; } - status = ppc4xx_edac_mc_init(mci, op, match, &dcr_host, mcopt1); + status = ppc4xx_edac_mc_init(mci, op, &dcr_host, mcopt1); if (status) { ppc4xx_edac_mc_printk(KERN_ERR, mci, @@ -1421,7 +1412,7 @@ ppc4xx_edac_init(void) ppc4xx_edac_opstate_init(); - return of_register_platform_driver(&ppc4xx_edac_driver); + return platform_driver_register(&ppc4xx_edac_driver); } /** @@ -1434,7 +1425,7 @@ ppc4xx_edac_init(void) static void __exit ppc4xx_edac_exit(void) { - of_unregister_platform_driver(&ppc4xx_edac_driver); + platform_driver_unregister(&ppc4xx_edac_driver); } module_init(ppc4xx_edac_init); diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c index 6a822c631ef..678513738c3 100644 --- a/drivers/edac/r82600_edac.c +++ b/drivers/edac/r82600_edac.c @@ -120,7 +120,7 @@ * write 0=NOP */ -#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundry Address +#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundary Address * Registers * * 7:0 Address lines 30:24 - upper limit of @@ -217,7 +217,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, { struct csrow_info *csrow; int index; - u8 drbar; /* SDRAM Row Boundry Address Register */ + u8 drbar; /* SDRAM Row Boundary Address Register */ u32 row_high_limit, row_high_limit_last; u32 reg_sdram, ecc_on, row_base; @@ -236,7 +236,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, row_high_limit = ((u32) drbar << 24); /* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */ - debugf1("%s() Row=%d, Boundry Address=%#0x, Last = %#0x\n", + debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n", __func__, index, row_high_limit, row_high_limit_last); /* Empty row [p.57] */ diff --git a/drivers/edac/tile_edac.c b/drivers/edac/tile_edac.c new file mode 100644 index 00000000000..1d5cf06f6c6 --- /dev/null +++ b/drivers/edac/tile_edac.c @@ -0,0 +1,254 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Tilera-specific EDAC driver. + * + * This source code is derived from the following driver: + * + * Cell MIC driver for ECC counting + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/edac.h> +#include <hv/hypervisor.h> +#include <hv/drv_mshim_intf.h> + +#include "edac_core.h" + +#define DRV_NAME "tile-edac" + +/* Number of cs_rows needed per memory controller on TILEPro. */ +#define TILE_EDAC_NR_CSROWS 1 + +/* Number of channels per memory controller on TILEPro. */ +#define TILE_EDAC_NR_CHANS 1 + +/* Granularity of reported error in bytes on TILEPro. */ +#define TILE_EDAC_ERROR_GRAIN 8 + +/* TILE processor has multiple independent memory controllers. */ +struct platform_device *mshim_pdev[TILE_MAX_MSHIMS]; + +struct tile_edac_priv { + int hv_devhdl; /* Hypervisor device handle. */ + int node; /* Memory controller instance #. */ + unsigned int ce_count; /* + * Correctable-error counter + * kept by the driver. + */ +}; + +static void tile_edac_check(struct mem_ctl_info *mci) +{ + struct tile_edac_priv *priv = mci->pvt_info; + struct mshim_mem_error mem_error; + + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_error, + sizeof(struct mshim_mem_error), MSHIM_MEM_ERROR_OFF) != + sizeof(struct mshim_mem_error)) { + pr_err(DRV_NAME ": MSHIM_MEM_ERROR_OFF pread failure.\n"); + return; + } + + /* Check if the current error count is different from the saved one. */ + if (mem_error.sbe_count != priv->ce_count) { + dev_dbg(mci->dev, "ECC CE err on node %d\n", priv->node); + priv->ce_count = mem_error.sbe_count; + edac_mc_handle_ce(mci, 0, 0, 0, 0, 0, mci->ctl_name); + } +} + +/* + * Initialize the 'csrows' table within the mci control structure with the + * addressing of memory. + */ +static int __devinit tile_edac_init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow = &mci->csrows[0]; + struct tile_edac_priv *priv = mci->pvt_info; + struct mshim_mem_info mem_info; + + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_info, + sizeof(struct mshim_mem_info), MSHIM_MEM_INFO_OFF) != + sizeof(struct mshim_mem_info)) { + pr_err(DRV_NAME ": MSHIM_MEM_INFO_OFF pread failure.\n"); + return -1; + } + + if (mem_info.mem_ecc) + csrow->edac_mode = EDAC_SECDED; + else + csrow->edac_mode = EDAC_NONE; + switch (mem_info.mem_type) { + case DDR2: + csrow->mtype = MEM_DDR2; + break; + + case DDR3: + csrow->mtype = MEM_DDR3; + break; + + default: + return -1; + } + + csrow->first_page = 0; + csrow->nr_pages = mem_info.mem_size >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + csrow->nr_pages - 1; + csrow->grain = TILE_EDAC_ERROR_GRAIN; + csrow->dtype = DEV_UNKNOWN; + + return 0; +} + +static int __devinit tile_edac_mc_probe(struct platform_device *pdev) +{ + char hv_file[32]; + int hv_devhdl; + struct mem_ctl_info *mci; + struct tile_edac_priv *priv; + int rc; + + sprintf(hv_file, "mshim/%d", pdev->id); + hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0); + if (hv_devhdl < 0) + return -EINVAL; + + /* A TILE MC has a single channel and one chip-select row. */ + mci = edac_mc_alloc(sizeof(struct tile_edac_priv), + TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id); + if (mci == NULL) + return -ENOMEM; + priv = mci->pvt_info; + priv->node = pdev->id; + priv->hv_devhdl = hv_devhdl; + + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + + mci->mod_name = DRV_NAME; + mci->ctl_name = "TILEPro_Memory_Controller"; + mci->dev_name = dev_name(&pdev->dev); + mci->edac_check = tile_edac_check; + + /* + * Initialize the MC control structure 'csrows' table + * with the mapping and control information. + */ + if (tile_edac_init_csrows(mci)) { + /* No csrows found. */ + mci->edac_cap = EDAC_FLAG_NONE; + } else { + mci->edac_cap = EDAC_FLAG_SECDED; + } + + platform_set_drvdata(pdev, mci); + + /* Register with EDAC core */ + rc = edac_mc_add_mc(mci); + if (rc) { + dev_err(&pdev->dev, "failed to register with EDAC core\n"); + edac_mc_free(mci); + return rc; + } + + return 0; +} + +static int __devexit tile_edac_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + if (mci) + edac_mc_free(mci); + return 0; +} + +static struct platform_driver tile_edac_mc_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = tile_edac_mc_probe, + .remove = __devexit_p(tile_edac_mc_remove), +}; + +/* + * Driver init routine. + */ +static int __init tile_edac_init(void) +{ + char hv_file[32]; + struct platform_device *pdev; + int i, err, num = 0; + + /* Only support POLL mode. */ + edac_op_state = EDAC_OPSTATE_POLL; + + err = platform_driver_register(&tile_edac_mc_driver); + if (err) + return err; + + for (i = 0; i < TILE_MAX_MSHIMS; i++) { + /* + * Not all memory controllers are configured such as in the + * case of a simulator. So we register only those mshims + * that are configured by the hypervisor. + */ + sprintf(hv_file, "mshim/%d", i); + if (hv_dev_open((HV_VirtAddr)hv_file, 0) < 0) + continue; + + pdev = platform_device_register_simple(DRV_NAME, i, NULL, 0); + if (IS_ERR(pdev)) + continue; + mshim_pdev[i] = pdev; + num++; + } + + if (num == 0) { + platform_driver_unregister(&tile_edac_mc_driver); + return -ENODEV; + } + return 0; +} + +/* + * Driver cleanup routine. + */ +static void __exit tile_edac_exit(void) +{ + int i; + + for (i = 0; i < TILE_MAX_MSHIMS; i++) { + struct platform_device *pdev = mshim_pdev[i]; + if (!pdev) + continue; + + platform_set_drvdata(pdev, NULL); + platform_device_unregister(pdev); + } + platform_driver_unregister(&tile_edac_mc_driver); +} + +module_init(tile_edac_init); +module_exit(tile_edac_exit); |