diff options
Diffstat (limited to 'drivers/dma/ste_dma40_ll.h')
| -rw-r--r-- | drivers/dma/ste_dma40_ll.h | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h new file mode 100644 index 00000000000..2029280cb33 --- /dev/null +++ b/drivers/dma/ste_dma40_ll.h @@ -0,0 +1,354 @@ +/* + * driver/dma/ste_dma40_ll.h + * + * Copyright (C) ST-Ericsson 2007-2010 + * License terms: GNU General Public License (GPL) version 2 + * Author: Per Friden <per.friden@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#ifndef STE_DMA40_LL_H +#define STE_DMA40_LL_H + +#define D40_DREG_PCBASE 0x400 +#define D40_DREG_PCDELTA (8 * 4) +#define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */ + +#define D40_TYPE_TO_GROUP(type) (type / 16) +#define D40_TYPE_TO_EVENT(type) (type % 16) + +/* Most bits of the CFG register are the same in log as in phy mode */ +#define D40_SREG_CFG_MST_POS 15 +#define D40_SREG_CFG_TIM_POS 14 +#define D40_SREG_CFG_EIM_POS 13 +#define D40_SREG_CFG_LOG_INCR_POS 12 +#define D40_SREG_CFG_PHY_PEN_POS 12 +#define D40_SREG_CFG_PSIZE_POS 10 +#define D40_SREG_CFG_ESIZE_POS 8 +#define D40_SREG_CFG_PRI_POS 7 +#define D40_SREG_CFG_LBE_POS 6 +#define D40_SREG_CFG_LOG_GIM_POS 5 +#define D40_SREG_CFG_LOG_MFU_POS 4 +#define D40_SREG_CFG_PHY_TM_POS 4 +#define D40_SREG_CFG_PHY_EVTL_POS 0 + + +/* Standard channel parameters - basic mode (element register) */ +#define D40_SREG_ELEM_PHY_ECNT_POS 16 +#define D40_SREG_ELEM_PHY_EIDX_POS 0 + +#define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS) + +/* Standard channel parameters - basic mode (Link register) */ +#define D40_SREG_LNK_PHY_TCP_POS 0 +#define D40_SREG_LNK_PHY_LMP_POS 1 +#define D40_SREG_LNK_PHY_PRE_POS 2 +/* + * Source destination link address. Contains the + * 29-bit byte word aligned address of the reload area. + */ +#define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL + +/* Standard basic channel logical mode */ + +/* Element register */ +#define D40_SREG_ELEM_LOG_ECNT_POS 16 +#define D40_SREG_ELEM_LOG_LIDX_POS 8 +#define D40_SREG_ELEM_LOG_LOS_POS 1 +#define D40_SREG_ELEM_LOG_TCP_POS 0 + +#define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS) + +/* Link register */ +#define D40_DEACTIVATE_EVENTLINE 0x0 +#define D40_ACTIVATE_EVENTLINE 0x1 +#define D40_EVENTLINE_POS(i) (2 * i) +#define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i)) + +/* Standard basic channel logical params in memory */ + +/* LCSP0 */ +#define D40_MEM_LCSP0_ECNT_POS 16 +#define D40_MEM_LCSP0_SPTR_POS 0 + +#define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS) +#define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS) + +/* LCSP1 */ +#define D40_MEM_LCSP1_SPTR_POS 16 +#define D40_MEM_LCSP1_SCFG_MST_POS 15 +#define D40_MEM_LCSP1_SCFG_TIM_POS 14 +#define D40_MEM_LCSP1_SCFG_EIM_POS 13 +#define D40_MEM_LCSP1_SCFG_INCR_POS 12 +#define D40_MEM_LCSP1_SCFG_PSIZE_POS 10 +#define D40_MEM_LCSP1_SCFG_ESIZE_POS 8 +#define D40_MEM_LCSP1_SLOS_POS 1 +#define D40_MEM_LCSP1_STCP_POS 0 + +#define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS) +#define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS) +#define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS) +#define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS) +#define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS) +#define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS) + +/* LCSP2 */ +#define D40_MEM_LCSP2_ECNT_POS 16 + +#define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS) + +/* LCSP3 */ +#define D40_MEM_LCSP3_DCFG_MST_POS 15 +#define D40_MEM_LCSP3_DCFG_TIM_POS 14 +#define D40_MEM_LCSP3_DCFG_EIM_POS 13 +#define D40_MEM_LCSP3_DCFG_INCR_POS 12 +#define D40_MEM_LCSP3_DCFG_PSIZE_POS 10 +#define D40_MEM_LCSP3_DCFG_ESIZE_POS 8 +#define D40_MEM_LCSP3_DLOS_POS 1 +#define D40_MEM_LCSP3_DTCP_POS 0 + +#define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS) +#define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS) + + +/* Standard channel parameter register offsets */ +#define D40_CHAN_REG_SSCFG 0x00 +#define D40_CHAN_REG_SSELT 0x04 +#define D40_CHAN_REG_SSPTR 0x08 +#define D40_CHAN_REG_SSLNK 0x0C +#define D40_CHAN_REG_SDCFG 0x10 +#define D40_CHAN_REG_SDELT 0x14 +#define D40_CHAN_REG_SDPTR 0x18 +#define D40_CHAN_REG_SDLNK 0x1C + +/* DMA Register Offsets */ +#define D40_DREG_GCC 0x000 +#define D40_DREG_PRTYP 0x004 +#define D40_DREG_PRSME 0x008 +#define D40_DREG_PRSMO 0x00C +#define D40_DREG_PRMSE 0x010 +#define D40_DREG_PRMSO 0x014 +#define D40_DREG_PRMOE 0x018 +#define D40_DREG_PRMOO 0x01C +#define D40_DREG_LCPA 0x020 +#define D40_DREG_LCLA 0x024 +#define D40_DREG_ACTIVE 0x050 +#define D40_DREG_ACTIVO 0x054 +#define D40_DREG_FSEB1 0x058 +#define D40_DREG_FSEB2 0x05C +#define D40_DREG_PCMIS 0x060 +#define D40_DREG_PCICR 0x064 +#define D40_DREG_PCTIS 0x068 +#define D40_DREG_PCEIS 0x06C +#define D40_DREG_LCMIS0 0x080 +#define D40_DREG_LCMIS1 0x084 +#define D40_DREG_LCMIS2 0x088 +#define D40_DREG_LCMIS3 0x08C +#define D40_DREG_LCICR0 0x090 +#define D40_DREG_LCICR1 0x094 +#define D40_DREG_LCICR2 0x098 +#define D40_DREG_LCICR3 0x09C +#define D40_DREG_LCTIS0 0x0A0 +#define D40_DREG_LCTIS1 0x0A4 +#define D40_DREG_LCTIS2 0x0A8 +#define D40_DREG_LCTIS3 0x0AC +#define D40_DREG_LCEIS0 0x0B0 +#define D40_DREG_LCEIS1 0x0B4 +#define D40_DREG_LCEIS2 0x0B8 +#define D40_DREG_LCEIS3 0x0BC +#define D40_DREG_STFU 0xFC8 +#define D40_DREG_ICFG 0xFCC +#define D40_DREG_PERIPHID0 0xFE0 +#define D40_DREG_PERIPHID1 0xFE4 +#define D40_DREG_PERIPHID2 0xFE8 +#define D40_DREG_PERIPHID3 0xFEC +#define D40_DREG_CELLID0 0xFF0 +#define D40_DREG_CELLID1 0xFF4 +#define D40_DREG_CELLID2 0xFF8 +#define D40_DREG_CELLID3 0xFFC + +/* LLI related structures */ + +/** + * struct d40_phy_lli - The basic configration register for each physical + * channel. + * + * @reg_cfg: The configuration register. + * @reg_elt: The element register. + * @reg_ptr: The pointer register. + * @reg_lnk: The link register. + * + * These registers are set up for both physical and logical transfers + * Note that the bit in each register means differently in logical and + * physical(standard) mode. + * + * This struct must be 16 bytes aligned, and only contain physical registers + * since it will be directly accessed by the DMA. + */ +struct d40_phy_lli { + u32 reg_cfg; + u32 reg_elt; + u32 reg_ptr; + u32 reg_lnk; +}; + +/** + * struct d40_phy_lli_bidir - struct for a transfer. + * + * @src: Register settings for src channel. + * @dst: Register settings for dst channel. + * @dst_addr: Physical destination address. + * @src_addr: Physical source address. + * + * All DMA transfers have a source and a destination. + */ + +struct d40_phy_lli_bidir { + struct d40_phy_lli *src; + struct d40_phy_lli *dst; + dma_addr_t dst_addr; + dma_addr_t src_addr; +}; + + +/** + * struct d40_log_lli - logical lli configuration + * + * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst. + * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst. + * + * This struct must be 8 bytes aligned since it will be accessed directy by + * the DMA. Never add any none hw mapped registers to this struct. + */ + +struct d40_log_lli { + u32 lcsp02; + u32 lcsp13; +}; + +/** + * struct d40_log_lli_bidir - For both src and dst + * + * @src: pointer to src lli configuration. + * @dst: pointer to dst lli configuration. + * + * You always have a src and a dst when doing DMA transfers. + */ + +struct d40_log_lli_bidir { + struct d40_log_lli *src; + struct d40_log_lli *dst; +}; + +/** + * struct d40_log_lli_full - LCPA layout + * + * @lcsp0: Logical Channel Standard Param 0 - Src. + * @lcsp1: Logical Channel Standard Param 1 - Src. + * @lcsp2: Logical Channel Standard Param 2 - Dst. + * @lcsp3: Logical Channel Standard Param 3 - Dst. + * + * This struct maps to LCPA physical memory layout. Must map to + * the hw. + */ +struct d40_log_lli_full { + u32 lcsp0; + u32 lcsp1; + u32 lcsp2; + u32 lcsp3; +}; + +/** + * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings + * + * @lcsp3: The default configuration for dst. + * @lcsp1: The default configuration for src. + */ +struct d40_def_lcsp { + u32 lcsp3; + u32 lcsp1; +}; + +/** + * struct d40_lcla_elem - Info for one LCA element. + * + * @src_id: logical channel src id + * @dst_id: logical channel dst id + * @src: LCPA formated src parameters + * @dst: LCPA formated dst parameters + * + */ +struct d40_lcla_elem { + int src_id; + int dst_id; + struct d40_log_lli *src; + struct d40_log_lli *dst; +}; + +/* Physical channels */ + +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, + u32 *src_cfg, u32 *dst_cfg, bool is_log); + +void d40_log_cfg(struct stedma40_chan_cfg *cfg, + u32 *lcsp1, u32 *lcsp2); + +int d40_phy_sg_to_lli(struct scatterlist *sg, + int sg_len, + dma_addr_t target, + struct d40_phy_lli *lli, + dma_addr_t lli_phys, + u32 reg_cfg, + u32 data_width, + int psize, + bool term_int); + +int d40_phy_fill_lli(struct d40_phy_lli *lli, + dma_addr_t data, + u32 data_size, + int psize, + dma_addr_t next_lli, + u32 reg_cfg, + bool term_int, + u32 data_width, + bool is_device); + +void d40_phy_lli_write(void __iomem *virtbase, + u32 phy_chan_num, + struct d40_phy_lli *lli_dst, + struct d40_phy_lli *lli_src); + +/* Logical channels */ + +void d40_log_fill_lli(struct d40_log_lli *lli, + dma_addr_t data, u32 data_size, + u32 lli_next_off, u32 reg_cfg, + u32 data_width, + bool term_int, bool addr_inc); + +int d40_log_sg_to_dev(struct d40_lcla_elem *lcla, + struct scatterlist *sg, + int sg_len, + struct d40_log_lli_bidir *lli, + struct d40_def_lcsp *lcsp, + u32 src_data_width, + u32 dst_data_width, + enum dma_data_direction direction, + bool term_int, dma_addr_t dev_addr, int max_len, + int llis_per_log); + +void d40_log_lli_write(struct d40_log_lli_full *lcpa, + struct d40_log_lli *lcla_src, + struct d40_log_lli *lcla_dst, + struct d40_log_lli *lli_dst, + struct d40_log_lli *lli_src, + int llis_per_log); + +int d40_log_sg_to_lli(int lcla_id, + struct scatterlist *sg, + int sg_len, + struct d40_log_lli *lli_sg, + u32 lcsp13, /* src or dst*/ + u32 data_width, + bool term_int, int max_len, int llis_per_log); + +#endif /* STE_DMA40_LLI_H */ |