1 files changed, 12 insertions, 20 deletions

diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
index d418b829721..64f9e829443 100644
--- a/drivers/clocksource/scx200_hrt.c
+++ b/drivers/clocksource/scx200_hrt.c
@@ -43,27 +43,25 @@ MODULE_PARM_DESC(ppm, "+-adjust to actual XO freq (ppm)");
 /* The base timer frequency, * 27 if selected */
 #define HRT_FREQ   1000000
 
-static cycle_t read_hrt(void)
+static cycle_t read_hrt(struct clocksource *cs)
 {
 	/* Read the timer value */
 	return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
 }
 
-#define HRT_SHIFT_1	22
-#define HRT_SHIFT_27	26
-
 static struct clocksource cs_hrt = {
 	.name		= "scx200_hrt",
 	.rating		= 250,
 	.read		= read_hrt,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.is_continuous	= 1,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 	/* mult, shift are set based on mhz27 flag */
 };
 
 static int __init init_hrt_clocksource(void)
 {
-	/* Make sure scx200 has initializedd the configuration block */
+	u32 freq;
+	/* Make sure scx200 has initialized the configuration block */
 	if (!scx200_cb_present())
 		return -ENODEV;
 
@@ -71,27 +69,21 @@ static int __init init_hrt_clocksource(void)
 	if (!request_region(scx200_cb_base + SCx200_TIMER_OFFSET,
 			    SCx200_TIMER_SIZE,
 			    "NatSemi SCx200 High-Resolution Timer")) {
-		printk(KERN_WARNING NAME ": unable to lock timer region\n");
+		pr_warn("unable to lock timer region\n");
 		return -ENODEV;
 	}
 
 	/* write timer config */
-	outb(HR_TMEN | (mhz27) ? HR_TMCLKSEL : 0,
+	outb(HR_TMEN | (mhz27 ? HR_TMCLKSEL : 0),
 	     scx200_cb_base + SCx200_TMCNFG_OFFSET);
 
-	if (mhz27) {
-		cs_hrt.shift = HRT_SHIFT_27;
-		cs_hrt.mult = clocksource_hz2mult((HRT_FREQ + ppm) * 27,
-						  cs_hrt.shift);
-	} else {
-		cs_hrt.shift = HRT_SHIFT_1;
-		cs_hrt.mult = clocksource_hz2mult(HRT_FREQ + ppm,
-						  cs_hrt.shift);
-	}
-	printk(KERN_INFO "enabling scx200 high-res timer (%s MHz +%d ppm)\n",
-		mhz27 ? "27":"1", ppm);
+	freq = (HRT_FREQ + ppm);
+	if (mhz27)
+		freq *= 27;
+
+	pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
 
-	return clocksource_register(&cs_hrt);
+	return clocksource_register_hz(&cs_hrt, freq);
 }
 
 module_init(init_hrt_clocksource);