aboutsummaryrefslogtreecommitdiff
path: root/drivers/char
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/Kconfig7
-rw-r--r--drivers/char/pcmcia/Kconfig4
-rw-r--r--drivers/char/pcmcia/synclink_cs.c62
3 files changed, 37 insertions, 36 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 72bedad6bf8..3bb6fa3930b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -53,7 +53,7 @@ source "drivers/tty/serial/Kconfig"
config TTY_PRINTK
bool "TTY driver to output user messages via printk"
- depends on EXPERT
+ depends on EXPERT && TTY
default n
---help---
If you say Y here, the support for writing user messages (i.e.
@@ -159,7 +159,7 @@ source "drivers/tty/hvc/Kconfig"
config VIRTIO_CONSOLE
tristate "Virtio console"
- depends on VIRTIO
+ depends on VIRTIO && TTY
select HVC_DRIVER
help
Virtio console for use with lguest and other hypervisors.
@@ -392,6 +392,7 @@ config XILINX_HWICAP
config R3964
tristate "Siemens R3964 line discipline"
+ depends on TTY
---help---
This driver allows synchronous communication with devices using the
Siemens R3964 packet protocol. Unless you are dealing with special
@@ -439,7 +440,7 @@ source "drivers/char/pcmcia/Kconfig"
config MWAVE
tristate "ACP Modem (Mwave) support"
- depends on X86
+ depends on X86 && TTY
select SERIAL_8250
---help---
The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index 6614416a862..2a166d56738 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -7,7 +7,7 @@ menu "PCMCIA character devices"
config SYNCLINK_CS
tristate "SyncLink PC Card support"
- depends on PCMCIA
+ depends on PCMCIA && TTY
help
Enable support for the SyncLink PC Card serial adapter, running
asynchronous and HDLC communications up to 512Kbps. The port is
@@ -45,7 +45,7 @@ config CARDMAN_4040
config IPWIRELESS
tristate "IPWireless 3G UMTS PCMCIA card support"
- depends on PCMCIA && NETDEVICES
+ depends on PCMCIA && NETDEVICES && TTY
select PPP
help
This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index b66eaa04f8c..d0c9852ab87 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -210,7 +210,7 @@ typedef struct _mgslpc_info {
char testing_irq;
unsigned int init_error; /* startup error (DIAGS) */
- char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+ char *flag_buf;
bool drop_rts_on_tx_done;
struct _input_signal_events input_signal_events;
@@ -765,9 +765,6 @@ static void bh_handler(struct work_struct *work)
struct tty_struct *tty;
int action;
- if (!info)
- return;
-
if (debug_level >= DEBUG_LEVEL_BH)
printk( "%s(%d):bh_handler(%s) entry\n",
__FILE__,__LINE__,info->device_name);
@@ -886,21 +883,14 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
issue_command(info, CHA, CMD_RXFIFO);
}
-static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
+static void rx_ready_async(MGSLPC_INFO *info, int tcd)
{
+ struct tty_port *port = &info->port;
unsigned char data, status, flag;
int fifo_count;
int work = 0;
struct mgsl_icount *icount = &info->icount;
- if (!tty) {
- /* tty is not available anymore */
- issue_command(info, CHA, CMD_RXRESET);
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):rx_ready_async(tty=NULL)\n",__FILE__,__LINE__);
- return;
- }
-
if (tcd) {
/* early termination, get FIFO count from RBCL register */
fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
@@ -913,7 +903,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
} else
fifo_count = 32;
- tty_buffer_request_room(tty, fifo_count);
+ tty_buffer_request_room(port, fifo_count);
/* Flush received async data to receive data buffer. */
while (fifo_count) {
data = read_reg(info, CHA + RXFIFO);
@@ -944,7 +934,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
else if (status & BIT6)
flag = TTY_FRAME;
}
- work += tty_insert_flip_char(tty, data, flag);
+ work += tty_insert_flip_char(port, data, flag);
}
issue_command(info, CHA, CMD_RXFIFO);
@@ -957,7 +947,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
}
if (work)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(port);
}
@@ -1217,7 +1207,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
if (info->params.mode == MGSL_MODE_HDLC)
rx_ready_hdlc(info, isr & IRQ_RXEOM);
else
- rx_ready_async(info, isr & IRQ_RXEOM, tty);
+ rx_ready_async(info, isr & IRQ_RXEOM);
}
/* transmit IRQs */
@@ -1353,7 +1343,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
reset_device(info);
if (!tty || tty->termios.c_cflag & HUPCL) {
- info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
}
@@ -1415,12 +1405,12 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
cflag = tty->termios.c_cflag;
- /* if B0 rate (hangup) specified then negate DTR and RTS */
- /* otherwise assert DTR and RTS */
+ /* if B0 rate (hangup) specified then negate RTS and DTR */
+ /* otherwise assert RTS and DTR */
if (cflag & CBAUD)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
/* byte size and parity */
@@ -2311,7 +2301,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
!(tty->termios.c_cflag & CBAUD)) {
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -2474,9 +2464,9 @@ static void dtr_rts(struct tty_port *port, int onoff)
spin_lock_irqsave(&info->lock,flags);
if (onoff)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
@@ -2521,7 +2511,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
goto cleanup;
}
- tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
@@ -2674,6 +2664,14 @@ static int rx_alloc_buffers(MGSLPC_INFO *info)
if (info->rx_buf == NULL)
return -ENOMEM;
+ /* unused flag buffer to satisfy receive_buf calling interface */
+ info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
+ if (!info->flag_buf) {
+ kfree(info->rx_buf);
+ info->rx_buf = NULL;
+ return -ENOMEM;
+ }
+
rx_reset_buffers(info);
return 0;
}
@@ -2682,6 +2680,8 @@ static void rx_free_buffers(MGSLPC_INFO *info)
{
kfree(info->rx_buf);
info->rx_buf = NULL;
+ kfree(info->flag_buf);
+ info->flag_buf = NULL;
}
static int claim_resources(MGSLPC_INFO *info)
@@ -3575,8 +3575,8 @@ static void get_signals(MGSLPC_INFO *info)
{
unsigned char status = 0;
- /* preserve DTR and RTS */
- info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+ /* preserve RTS and DTR */
+ info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
if (read_reg(info, CHB + VSTR) & BIT7)
info->serial_signals |= SerialSignal_DCD;
@@ -3590,7 +3590,7 @@ static void get_signals(MGSLPC_INFO *info)
info->serial_signals |= SerialSignal_DSR;
}
-/* Set the state of DTR and RTS based on contents of
+/* Set the state of RTS and DTR based on contents of
* serial_signals member of device extension.
*/
static void set_signals(MGSLPC_INFO *info)
@@ -4009,8 +4009,8 @@ static int hdlcdev_open(struct net_device *dev)
spin_unlock_irqrestore(&info->netlock, flags);
return rc;
}
- /* assert DTR and RTS, apply hardware settings */
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ /* assert RTS and DTR, apply hardware settings */
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
mgslpc_program_hw(info, tty);
tty_kref_put(tty);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 12:44:24 +0000