aboutsummaryrefslogtreecommitdiff
path: root/drivers/char
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/ChangeLog775
-rw-r--r--drivers/char/agp/Kconfig2
-rw-r--r--drivers/char/agp/intel-agp.c125
-rw-r--r--drivers/char/applicom.c2
-rw-r--r--drivers/char/cyclades.c16
-rw-r--r--drivers/char/hvc_console.c2
-rw-r--r--drivers/char/hvc_iseries.c2
-rw-r--r--drivers/char/hvc_iucv.c6
-rw-r--r--drivers/char/hw_random/n2-drv.c2
-rw-r--r--drivers/char/ip2/i2hw.h2
-rw-r--r--drivers/char/ip2/ip2main.c26
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c71
-rw-r--r--drivers/char/isicom.c54
-rw-r--r--drivers/char/mem.c195
-rw-r--r--drivers/char/mmtimer.c2
-rw-r--r--drivers/char/moxa.c20
-rw-r--r--drivers/char/mxser.c3
-rw-r--r--drivers/char/n_tty.c17
-rw-r--r--drivers/char/nozomi.c157
-rw-r--r--drivers/char/pty.c2
-rw-r--r--drivers/char/random.c2
-rw-r--r--drivers/char/serial167.c5
-rw-r--r--drivers/char/specialix.c2
-rw-r--r--drivers/char/synclink.c4
-rw-r--r--drivers/char/synclink_gt.c186
-rw-r--r--drivers/char/tty_audit.c1
-rw-r--r--drivers/char/tty_buffer.c17
-rw-r--r--drivers/char/tty_io.c2
-rw-r--r--drivers/char/tty_ldisc.c50
-rw-r--r--drivers/char/virtio_console.c29
-rw-r--r--drivers/char/vt.c6
-rw-r--r--drivers/char/vt_ioctl.c39
32 files changed, 643 insertions, 1181 deletions
diff --git a/drivers/char/ChangeLog b/drivers/char/ChangeLog
deleted file mode 100644
index 56b8a2e76ab..00000000000
--- a/drivers/char/ChangeLog
+++ /dev/null
@@ -1,775 +0,0 @@
-2001-08-11 Tim Waugh <twaugh@redhat.com>
-
- * serial.c (get_pci_port): Deal with awkward Titan cards.
-
-1998-08-26 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (rs_open): Correctly decrement the module in-use count
- on errors.
-
-Thu Feb 19 14:24:08 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * tty_io.c (tty_name): Remove the non-reentrant (and non-SMP safe)
- version of tty_name, and rename the reentrant _tty_name
- function to be tty_name.
- (tty_open): Add a warning message stating callout devices
- are deprecated.
-
-Mon Dec 1 08:24:15 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * tty_io.c (tty_get_baud_rate): Print a warning syslog if the
- tty->alt_speed kludge is used; this means the system is
- using the deprecated SPD_HI ioctls.
-
-Mon Nov 24 10:37:49 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c, esp.c, rocket.c: Change drivers to take advantage of
- tty_get_baud_rate().
-
- * tty_io.c (tty_get_baud_rate): New function which computes the
- correct baud rate for the tty. More factoring out of
- common code out of the serial driver to the high-level tty
- functions....
-
-Sat Nov 22 07:53:36 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c, esp.c, rocket.c: Add tty->driver.break() routine, and
- allow high-level tty code to handle the break and soft
- carrier ioctls.
-
- * tty_ioctl.c (n_tty_ioctl): Support TIOCGSOFTCAR and
- TIOCSSOFTCAR, so that device drivers don't have to support
- it.
-
- * serial.c (autoconfig): Change 16750 test to hopefully eliminate
- false results by people with strange 16550As being
- detected as 16750s. Hopefully 16750s will still be
- detected as 16750, and other weird UARTs won't get poorly
- autodetected. If this doesn't work, I'll have to disable
- the auto identification for the 16750.
-
- * tty_io.c (tty_hangup): Now actually do the tty hangup
- processing during the timer processing, and disable
- interrupts while doing the hangup processing. This avoids
- several nasty race conditions which happened when the
- hangup processing was done asynchronously.
- (tty_ioctl): Do break handling in the tty driver if
- driver's break function is supported.
- (tty_flip_buffer_push): New exported function which should
- be used by drivers to push characters in the flip buffer
- to the tty handler. This may either be done using a task
- queue function for better CPU efficiency, or directly for
- low latency operation.
-
- * serial.c (rs_set_termios): Fix bug rs_set_termios when
- transitioning away from B0, submitted by Stanislav
- Voronyi.
-
-Thu Jun 19 20:05:58 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (begin_break, end_break, rs_ioctl): Applied patch
- to support BSD ioctls to set and clear the break
- condition explicitly.
-
- * console.c (scrup, scrdown, insert_line, delete_line): Applied
- fix suggested by Aaron Tiensivu to speed up block scrolls
- up and down.
-
- * n_tty.c (opost_block, write_chan): Added a modified "fast
- console" patch which processes a block of text via
- "cooking" efficiently.
-
-Wed Jun 18 15:25:50 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * tty_io.c (init_dev, release_dev): Applied fix suggested by Bill
- Hawes to prevent race conditions in the tty code.
-
- * n_tty.c (n_tty_chars_in_buffer): Applied fix suggested by Bill
- Hawes so that n_tty_chars_in_buffer returns the correct
- value in the case when the tty is in cannonical mode. (To
- avoid a pty deadlock with telnetd.)
-
-Thu Feb 27 01:53:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (change_speed): Add support for the termios flag
- CMSPAR, which allows the user to select stick parity.
- (i.e, if PARODD is set, the parity bit is always 1; if
- PARRODD is not set, then the parity bit is always 0).
-
-Wed Feb 26 19:03:10 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (cleanup_module): Fix memory leak when using the serial
- driver as a module; make sure tmp_buf gets freed!
-
-Tue Feb 25 11:01:59 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (set_modem_info): Add support for setting and clearing
- the OUT1 and OUT2 bits. (For special case UART's, usually
- for half-duplex.)
- (autoconfig, change_speed): Fix TI 16750 support.
-
-Sun Feb 16 00:14:43 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * tty_io.c (release_dev): Add sanity check to make sure there are
- no waiters on tty->read_wait or tty->write_wait.
-
- * serial.c (rs_init): Don't autoconfig a device if the I/O region
- is already reserved.
-
- * serial.c (serial_proc_info): Add support for /proc/serial.
-
-Thu Feb 13 00:49:10 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (receive_chars): When the UART repotrs an overrun
- condition, it does so with a valid character. Changed to
- not throw away the valid character, but instead report the
- overrun after the valid character.
-
- * serial.c: Added new #ifdef's for some of the advanced serial
- driver features. A minimal driver that only supports COM
- 1/2/3/4 without sharing serial interrupts only takes 17k;
- the full driver takes 32k.
-
-Wed Feb 12 14:50:44 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * vt.c:
- * pty.c:
- * tty_ioctl.c:
- * serial.c: Update routines to use the new 2.1 memory access
- routines.
-
-Wed Dec 4 07:51:52 1996 Theodore Ts'o <tytso@localhost.mit.edu>
-
- * serial.c (change_speed): Use save_flags(); cli() and
- restore_flags() in order to ensure we don't accidentally
- turn on interrupts when starting up the port.
- (startup): Move the insertion of serial structure into the
- IRQ chain earlier into the startup processing. Interrupts
- should be off this whole time, but we eventually will want
- to reduce this window.
-
-Thu Nov 21 10:05:22 1996 Theodore Ts'o <tytso@localhost.mit.edu>
-
- * tty_ioctl.c (tty_wait_until_sent): Always check the driver
- wait_until_ready routine, even if there are no characters
- in the xmit buffer. (There may be charactes in the device
- FIFO.)
- (n_tty_ioctl): Add new flag tty->flow_stopped which
- indicates whether the tty is stopped due to a request by
- the TCXONC ioctl (used by tcflow). If so, don't let an
- incoming XOFF character restart the tty. The tty can only
- be restarted by another TCXONC request.
-
- * tty_io.c (start_tty): Don't allow the tty to be restarted if
- tty->flow_stopped is true.
-
- * n_tty.c (n_tty_receive_char): If tty->flow_stopped is true, and
- IXANY is set, don't eat a character trying to restart the
- tty.
-
- * serial.c (startup): Remove need for MCR_noint from the
- async_struct structure. Only turn on DTR and RTS if the
- baud rate is not zero.
- (change_speed): More accurately calculate the timeout
- value based on the word size. Move responsibility of
- hangup when speed becomes B0 to rs_set_termios()
- (set_serial_info): When changing the UART type set the
- current xmit_fifo_size as well as the permanent
- xmit_fifo_size.
- (rs_ioctl): Fix TCSBRK (used by tcdrain) and TCSBRKP
- ioctls to return EINTR if interrupted by a signal.
- (rs_set_termios): If the baud rate changes to or from B0,
- this function is now responsible for setting or clearing
- DTR and RTS. DTR and RTS are only be changed on the
- transition to or from the B0 state.
- (rs_close): Wait for the characters to drain based on
- info->timeout. At low baud rates (50 bps), it may take a
- long time for the FIFO to completely drain out!
- (rs_wait_until_sent): Fixed timeout handling. Now
- releases control to the scheduler, but checks frequently
- enough so that the function is sensitive enough to pass
- the timing requirements of the NIST-PCTS.
- (block_til_ready): When opening the device, don't turn on
- DTR and RTS if the baud rate is B0.
-
-Thu Nov 14 00:06:09 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c (autoconfig): Fix autoconfiguration problems;
- info->flags wasn't getting initialized from the state
- structure. Put in more paranoid test for the 16750.
-
-Fri Nov 8 20:19:50 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * n_tty.c (n_tty_flush_buffer): Only call driver->unthrottle() if
- the tty was previous throttled.
- (n_tty_set_termios, write_chan): Add changes suggested by
- Simon P. Allen to allow hardware cooking.
-
- * tty_ioctl.c (set_termios): If we get a signal while waiting for
- the tty to drain, return -EINTR.
-
- * serial.c (change_speed): Add support for CREAD, as required by
- POSIX.
-
-Sat Nov 2 20:43:10 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * serial.c: Wholesale changes. Added support for the Startech
- 16650 and 16650V2 chips. (WARNING: the new startech
- 16650A may or may not work!) Added support for the
- TI16750 (not yet tested). Split async_struct into a
- transient part (async_struct) and a permanent part
- (serial_state) which contains the configuration
- information for the ports. Added new driver routines
- wait_until_sent() and send_xchar() to help with POSIX
- compliance. Added support for radio clocks which waggle
- the carrier detect line (CONFIG_HARD_PPS).
-
- * tty_ioctl.c (tty_wait_until_sent): Added call to new driver
- function tty->driver.wait_until_sent(), which returns when
- the tty's device xmit buffers are drained. Needed for
- full POSIX compliance.
-
- (send_prio_char): New function, called by the ioctl's
- TCIOFF and TCION; uses the new driver call send_xchar(),
- which will send the XON or XOFF character at high priority
- (and even if tty output is stopped).
-
-Wed Jun 5 18:52:04 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * pty.c (pty_close): When closing a pty, make sure packet mode is
- cleared.
-
-Sun May 26 09:33:52 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * vesa_blank.c (set_vesa_blanking): Add missing verify_area() call.
-
- * selection.c (set_selection): Add missing verify_area() call.
-
- * tty_io.c (tty_ioctl): Add missing verify_area() calls.
-
- * serial.c (rs_ioctl): Add missing verify_area() calls.
- (rs_init): Allow initialization of serial driver
- configuration from a module.
-
- * random.c (extract_entropy): Add missing verify_area call.
- Don't limit number of characters returned to
- 32,768. Extract entropy is now no longer a inlined
- function.
-
- (random_read): Check return value in case extract_entropy
- returns an error.
-
- (secure_tcp_sequence_number): New function which returns a
- secure TCP sequence number. This is needed to prevent some
- nasty TCP hijacking attacks.
-
- (init_std_data): Initialize using gettimeofday() instead of
- struct timeval xtime.
-
- (fast_add_entropy_word, add_entropy_word): Rename the
- inline function add_entropy_word() to
- fast_add_entropy_word(). Make add_entropy_word() be the
- non-inlined function which is used in non-timing critical
- places, in order to save space.
-
- (initialize_benchmark, begin_benchmark, end_benchmark): New
- functions defined when RANDOM_BENCHMARK is defined. They
- allow us to benchmark the speed of the
- add_timer_randomness() call.
-
- (int_ln, rotate_left): Add two new inline functions with
- i386 optimized asm instructions. This speeds up the
- critical add_entropy_word() and add_timer_randomness()
- functions, which are called from interrupt handlers.
-
-Tue May 7 22:51:11 1996 <tytso@rsts-11.mit.edu>
-
- * random.c (add_timer_randomness): Limit the amount randomness
- that we estimate to 12 bits. (An arbitrary amount).
-
- (extract_entropy): To make it harder to analyze the hash
- function, fold the hash function in half using XOR, and
- use the folded result as the value to emit to the user.
- Also, add timer randomness each pass through the
- exact_entropy call, to increase the amount of unknown
- values during the extraction process.
-
- (random_ioctl): Use IOR/IOW definitions to define the
- ioctl values used by the /dev/random driver. Allow the
- old ioctl values to be used for backwards compatibility
- (for a limited amount of time).
-
-Wed Apr 24 14:02:04 1996 Theodore Ts'o <tytso@rsts-11.mit.edu>
-
- * random.c (add_timer_randomness): Use 2nd derivative as well to
- better estimate entropy.
-
- (rand_initialize): Explicitly initialize all the pointers
- to NULL. (Clearing pointers using memset isn't portable.)
- Initialize the random pool with OS-dependent data.
-
- (random_write): Add sanity checking to the arguments to
- random_write(), so that bad arguments won't cause a kernel
- SEGV.
-
- (random_read): Update the access time of the device inode
- when you return data to the user.
-
- (random_ioctl): Wake up the random_wait channel when there
- are only WAIT_INPUT_BITS available. Add more paranoia
- checks to make sure entropy_count doesn't go beyond the
- bounds of (0, POOLSIZE). Add a few missing verify_area
- checks. Add support for the RNDCLEARPOOL ioctl, which
- zaps the random pool.
-
- (add_timer_randomness): Wake up the random_wait
- channel only when there are WAIT_INPUT_BITS available.
-
- (random_select): Allow a random refresh daemon process to
- select on /dev/random for writing; wake up the daemon when
- there are less than WAIT_OUTPUT_BITS bits of randomness
- available.
-
-Tue Apr 23 22:56:07 1996 <tytso@rsts-11.mit.edu>
-
- * tty_io.c (init_dev): Change return code when user attempts to
- open master pty which is already open from EAGAIN to EIO,
- to match with BSD expectations. EIO is more correct
- anyway, since EAGAIN implies that retrying will be
- successful --- which it might be.... Eventually!!
-
- * pty.c (pty_open, pty_close): Fix wait loop so that we don't
- busy loop while waiting for the master side to open.
- Fix tty opening/closing logic. TTY_SLAVE_CLOSED was
- renamed to TTY_OTHER_CLOSED, so that the name is more
- descriptive. Also fixed code so that the tty flag
- actually works correctly now....
-
-Mon Apr 1 10:22:01 1996 <tytso@rsts-11.mit.edu>
-
- * serial.c (rs_close): Cleaned up modularization changes.
- Remove code which forced line discipline back to N_TTY
- this is done in the tty upper layers, and there's no
- reason to do it here. (Making this change also
- removed the requirement that the serial module access
- the internal kernel symbol "ldiscs".)
-
- * tty_io.c (tty_init): Formally register a tty_driver entry for
- /dev/tty (device 4, 0) and /dev/console (device 5, 0).
- This guarantees that major device numbers 4 and 5 will be
- reserved for the tty subsystem (as they have to be because
- of /dev/tty and /dev/console). Removed tty_regdev, as
- this interface is no longer necessary.
-
-Sun Mar 17 20:42:47 GMT 1996 <ah@doc.ic.ac.uk>
-
- * serial.c : modularisation (changes in linux/fs/device.c allow
- kerneld to automatically load the serial module).
-
- * Makefile, Config.in : serial modularisation adds.
-
- * tty_io.c : tty_init_ctty used by to register "cua" driver just
- for the /dev/tty device (5,0). Added tty_regdev.
-
- * serial.c (shutdown, rs_ioctl) : when port shuts down wakeup processes
- waiting on delta_msr_wait. The TIOCMIWAIT ioctl returns EIO
- if no change was done since the time of call.
-
-Sat Mar 16 14:33:13 1996 <aeb@cwi.nl>
-
- * tty_io.c (disassociate_ctty): If disassociate_ctty is called by
- exit, do not perform an implicit vhangup on a pty.
-
-Fri Feb 9 14:15:47 1996 <tytso@rsts-11.mit.edu>
-
- * serial.c (block_til_ready): Fixed another race condition which
- happens if a hangup happens during the open.
-
-Wed Jan 10 10:08:00 1996 <tytso@rsts-11.mit.edu>
-
- * serial.c (block_til_ready): Remove race condition which happened
- if a hangup condition happened during the setup of the
- UART, before rs_open() called block_til_ready(). This
- caused the info->count counter to be erroneously
- decremented.
-
- * serial.c (startup, rs_open): Remove race condition that could
- cause a memory leak of one page. (Fortunately, both race
- conditions were relatively rare in practice.)
-
-Tue Dec 5 13:21:27 1995 <tytso@rsts-11.mit.edu>
-
- * serial.c (check_modem_status, rs_ioctl): Support the new
- ioctl()'s TIOCGICOUNT, TIOCMIWAIT. These allow an
- application program to wait on a modem serial register
- status bit change, and to find out how many changes have
- taken place for the MSR bits.
-
- (rs_write): Eliminate a race condition which is introduced
- if it is necessary to wait for the semaphore.
-
-Sat Nov 4 17:14:45 1995 <tytso@rsts-11.mit.edu>
-
- * tty_io.c (tty_init): Move registration of TTY_MAJOR and
- TTY_AUX_MAJOR to the end, so that /proc/devices looks
- prettier.
-
- * pty.c (pty_init): Use new major numbers for PTY master and slave
- devices. This allow us to have more than 64 pty's. We
- register the old pty devices for backwards compatibility.
- Note that a system should either be using the old pty
- devices or the new pty devices --- in general, it should
- try to use both, since they map into the same pty table.
- The old pty devices are strictly for backwards compatibility.
-
-Wed Oct 11 12:45:24 1995 <tytso@rsts-11.mit.edu>
-
- * tty_io.c (disassociate_ctty): If disassociate_ctty is called by
- exit, perform an implicit vhangup on the tty.
-
- * pty.c (pty_close): When the master pty is closed, send a hangup
- to the slave pty.
- (pty_open): Use the flag TTY_SLAVE_CLOSED to test to see
- if there are any open slave ptys, instead of using
- tty->link->count. The old method got confused if there
- were processes that had hung-up file descriptors on the
- slave tty.
-
-Tue May 2 00:53:25 1995 <tytso@rsx-11.mit.edu>
-
- * tty_io.c (tty_set_ldisc): Wait until the output buffer is
- drained before closing the old line discipline --- needed
- in only one case: XON/XOFF processing.
-
- * n_tty.c (n_tty_close): Don't bother waiting until the output
- driver is closed; in general, the line discipline
- shouldn't care if the hardware is finished
- transmitting before the line discipline terminates.
-
- * tty_io.c (release_dev): Shutdown the line discipline after
- decrementing the tty count variable; but set the
- TTY_CLOSING flag so that we know that this tty structure
- isn't long for this world.
-
- * tty_io.c (init_dev): Add sanity code to check to see if
- TTY_CLOSING is set on a tty structure; if so, something
- bad has happened (probably a line discipline close blocked
- when it shouldn't have; so do a kernel printk and then
- return an error).
-
-Wed Apr 26 10:23:44 1995 Theodore Y. Ts'o <tytso@localhost>
-
- * tty_io.c (release_dev): Try to shutdown the line discipline
- *before* decrementing the tty count variable; this removes
- a potential race condition which occurs when the line
- discipline close blocks, and another process then tries
- open the same serial port.
-
- * serial.c (rs_hangup): When hanging up, flush the output buffer
- before shutting down the UART. Otherwise the line
- discipline close blocks waiting for the characters to get
- flushed, which never happens until the serial port gets reused.
-
-Wed Apr 12 08:06:16 1995 Theodore Y. Ts'o <tytso@localhost>
-
- * serial.c (do_serial_hangup, do_softint, check_modem_status,
- rs_init): Hangups are now scheduled via a separate tqueue
- structure in the async_struct structure, tqueue_hangup.
- This task is pushed on to the tq_schedule queue, so that
- it is processed synchronously by the scheduler.
-
-Sat Feb 18 12:13:51 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (disassociate_ctty, tty_open, tty_ioctl): Clear
- current->tty_old_pgrp field when a session leader
- acquires a controlling tty, and after a session leader
- has disassociated from a controlling tty.
-
-Fri Feb 17 09:34:09 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_interrupt_single, rs_interrupt, rs_interrupt_multi):
- Change the number of passes made from 64 to be 256,
- configurable with the #define RS_ISR_PASS_LIMIT.
-
- * serial.c (rs_init, set_serial_info, get_serial_info, rs_close):
- Remove support for closing_wait2. Instead, set
- tty->closing and rely on the line discipline to prevent
- echo wars.
-
- * n_tty.c (n_tty_receive_char): IEXTEN does not need to be
- enabled in order for IXANY to be active.
-
- If tty->closing is set, then only process XON and XOFF
- characters.
-
-Sun Feb 12 23:57:48 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_timer): Change the interrupt poll time from 60
- seconds to 10 seconds, configurable with the #define
- RS_STROBE_TIME.
-
- * serial.c (rs_interrupt_multi, startup, shutdown, rs_ioctl,
- set_multiport_struct, get_multiport_struct): Add
- provisions for a new type of interrupt service routine,
- which better supports multiple serial ports on a single
- IRQ.
-
-Sun Feb 5 19:35:11 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_ioctl.c (n_tty_ioctl, set_termios, tty_wait_until_sent):
- * serial.c (rs_ioctl, rs_close):
- * cyclades.c (cy_ioctl, cy_close):
- * n_tty.c (n_tty_close): Rename wait_until_sent to
- tty_wait_until_sent, so that it's a better name to export
- in ksyms.c.
-
-Sat Feb 4 23:36:20 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_close): Added missing check for closing_wait2 being
- ASYNC_CLOSING_WAIT_NONE.
-
-Thu Jan 26 09:02:49 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_init, set_serial_info, get_serial_info,
- rs_close): Support close_wait in the serial driver.
- This is helpful for slow devices (like serial
- plotters) so that their outputs don't get flushed upon
- device close. This has to be configurable because
- normally we don't want ports to be hung up for long
- periods of time during a close when they are not
- connected to a device, or the device is powered off.
-
- The default is to wait 30 seconds; in the case of a
- very slow device, the close_wait timeout should be
- lengthened. If it is set to 0, the kernel will wait
- forever for all of the data to be transmitted.
-
-Thu Jan 17 01:17:20 1995 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (startup, change_speed, rs_init): Add support to detect
- the StarTech 16650 chip. Treat it as a 16450 for now,
- because of its FIFO bugs.
-
-Thu Jan 5 21:21:57 1995 <dahinds@users.sourceforge.net>
-
- * serial.c: (receive_char): Added counter to prevent infinite loop
- when a PCMCIA serial device is ejected.
-
-Thu Dec 29 17:53:48 1994 <tytso@rsx-11.mit.edu>
-
- * tty_io.c (check_tty_count): New procedure which checks
- tty->count to make sure that it matches with the number of
- open file descriptors which point at the structure. If
- the number doesn't match, it prints a warning message.
-
-Wed Dec 28 15:41:51 1994 <tytso@rsx-11.mit.edu>
-
- * tty_io.c (do_tty_hangup, disassociate_ctty): At hangup time,
- save the tty's current foreground process group in the
- session leader's task structure. When the session leader
- terminates, send a SIGHUP, SIGCONT to that process group.
- This is not required by POSIX, but it's not prohibited
- either, and it appears to be the least intrusive way
- to fix a problem that dialup servers have with
- orphaned process groups caused by modem hangups.
-
-Thu Dec 8 14:52:11 1994 <tytso@rsx-11.mit.edu>
-
- * serial.c (rs_ioctl): Don't allow most ioctl's if the serial port
- isn't initialized.
-
- * serial.c (rs_close): Don't clear the IER if the serial port
- isn't initialized.
-
- * serial.c (block_til_ready): Don't try to block on the dialin
- port if the serial port isn't initialized.
-
-Wed Dec 7 10:48:30 1994 Si Park (si@wimpol.demon.co.uk)
- * tty_io.c (tty_register_driver): Fix bug when linking onto
- the tty_drivers list. We now test that there are elements
- already on the list before setting the back link from the
- first element to the new driver.
-
- * tty_io.c (tty_unregister_driver): Fix bug in unlinking the
- specified driver from the tty_drivers list. We were not
- setting the back link correctly. This used to result in
- a dangling back link pointer and cause panics on the next
- call to get_tty_driver().
-
-Tue Nov 29 10:21:09 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (tty_unregister_driver): Fix bug in
- tty_unregister_driver where the pointer to the refcount is
- tested, instead of the refcount itself. This caused
- tty_unregister_driver to always return EBUSY.
-
-Sat Nov 26 11:59:24 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (tty_ioctl): Add support for the new ioctl
- TIOCTTYGSTRUCT, which allow a kernel debugging program
- direct read access to the tty and tty_driver structures.
-
-Fri Nov 25 17:26:22 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_set_termios): Don't wake up processes blocked in
- open when the CLOCAL flag changes, since a blocking
- open only samples the CLOCAL flag once when it blocks,
- and doesn't check it again. (n.b. FreeBSD has a
- different behavior for blocking opens; it's not clear
- whether Linux or FreeBSD's interpretation is correct.
- POSIX doesn't give clear guidance on this issue, so
- this may change in the future....)
-
- * serial.c (block_til_ready): Use the correct termios structure to
- check the CLOCAL flag. If the cuaXX device is active,
- then check the saved termios for the ttySXX device.
- Otherwise, use the currently active termios structure.
-
-Sun Nov 6 21:05:44 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (change_speed): Add support for direct access of
- 57,600 and 115,200 bps.
-
-Wed Nov 2 10:32:36 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * n_tty.c (n_tty_receive_room): Only allow excess characters
- through if we are in ICANON mode *and* there are other no
- pending lines in the buffer. Otherwise cut and paste over
- 4k breaks.
-
-Sat Oct 29 18:17:34 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_ioctl, get_lsr_info): Added patch suggested by Arne
- Riiber so that user mode programs can tell when the
- transmitter shift register is empty.
-
-Thu Oct 27 23:14:29 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_ioctl.c (wait_until_sent): Added debugging printk statements
- (under the #ifdef TTY_DEBUG_WAIT_UNTIL_SENT)
-
- * serial.c (rs_interrupt, rs_interrupt_single, receive_chars,
- change_speed, rs_close): rs_close now disables receiver
- interrupts when closing the serial port. This allows the
- serial port to close quickly when Linux and a modem (or a
- mouse) are engaged in an echo war; when closing the serial
- port, we now first stop listening to incoming characters,
- and *then* wait for the transmit buffer to drain.
-
- In order to make this change, the info->read_status_mask
- is now used to control what bits of the line status
- register are looked at in the interrupt routine in all
- cases; previously it was only used in receive_chars to
- select a few of the status bits.
-
-Mon Oct 24 23:36:21 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_close): Add a timeout to the transmitter flush
- loop; this is just a sanity check in case we have flaky
- (or non-existent-but-configured-by-the-user) hardware.
-
-Fri Oct 21 09:37:23 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (tty_fasync): When asynchronous I/O is enabled, if the
- process or process group has not be specified yet, set it
- to be the tty's process group, or if that is not yet set,
- to the current process's pid.
-
-Thu Oct 20 23:17:28 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * n_tty.c (n_tty_receive_room): If we are doing input
- canonicalization, let as many characters through as
- possible, so that the excess characters can be "beeped".
-
-Tue Oct 18 10:02:43 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_start): Removed an incorrect '!' that was
- preventing transmit interrupts from being re-enabled in
- rs_start(). Fortunately in most cases it would be
- re-enabled elsewhere, but this still should be fixed
- correctly.
-
-Sun Oct 9 23:46:03 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (do_tty_hangup): If the tty driver flags
- TTY_DRIVER_RESET_TERMIOS is set, then reset the termios
- settings back to the driver's initial configuration. This
- allows the termios settings to be reset even if a process
- has hung up file descriptors keeping a pty's termios from
- being freed and reset.
-
- * tty_io.c (release_dev): Fix memory leak. The pty's other
- termios structure should also be freed.
-
- * serial.c (rs_close, shutdown): Change how we wait for the
- transmitter to completely drain before shutting down the
- serial port. We now do it by scheduling in another
- process instead of busy looping with the interrupts turned
- on. This may eliminate some race condition problems that
- some people seem to be reporting.
-
-Sun Sep 25 14:18:14 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (release_dev): When freeing a tty make sure that both
- the tty and the o_tty (if present) aren't a process's
- controlling tty. (Previously, we only checked the tty.)
-
- * serial.c (change_speed): Only enable the Modem Status
- Interrupt for a port if CLOCAL is not set or CRTSCTS
- is set. If we're not checking the carrier detect and
- CTS line, there's no point in enabling the modem
- status interrupt. This will save spurious interrupts
- from slowing down systems who have terminals that
- don't support either line. (Of course, if you want
- only one of CD and CTS support, you will need a
- properly wired serial cable.)
-
-Thu Sep 22 08:32:48 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (do_SAK): Return if tty is null.
-
- * tty_io.c (_tty_name): Return "NULL tty" if the passed in tty is
- NULL.
-
-Sat Sep 17 13:19:25 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_ioctl.c (n_tty_ioctl): Fix TIOCGLCKTRMIOS and
- TIOCSLCKTRMIOS, which were totally broken. Remove
- extra indirection from argument; it should be a struct
- termios *, not a struct termios **.
- &real_tty->termios_locked should have been
- real_tty->termios_locked. This caused us to be
- reading and writing the termios_locked structure to
- random places in kernel memory.
-
- * tty_io.c (release_dev): Oops! Forgot to delete a critical kfree
- of the locked_termios. This leaves the locked_termios
- structure pointed at a freed object.
-
-Fri Sep 16 08:13:25 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * tty_io.c (tty_open): Don't check for an exclusive open until
- after the device specific open routine has been called.
- Otherwise, the serial device ref counting will be screwed
- up.
-
- * serial.c (rs_open, block_til_ready): Don't set termios structure
- until after block_til_ready has returned successfully.
- Modify block_til_ready to check the normal_termios
- structure directly, so it doesn't rely on termios being
- set before it's called.
-
-Thu Sep 15 23:34:01 1994 Theodore Y. Ts'o (tytso@rt-11)
-
- * serial.c (rs_close): Turn off interrupts during rs_close() to
- prevent a race condition with the hangup code (which
- runs during a software interrupt).
-
- * tty_io.c (release_dev): Don't free the locked_termios structure;
- its state must be retained across device opens.
-
-
- * tty_io.c (tty_unregister_driver): Added function to unregister a
- tty driver. (For loadable device drivers.)
-
-
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 2fb3a480f6b..4b66c69eaf5 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -57,7 +57,7 @@ config AGP_AMD
config AGP_AMD64
tristate "AMD Opteron/Athlon64 on-CPU GART support"
- depends on AGP && X86
+ depends on AGP && X86 && K8_NB
help
This option gives you AGP support for the GLX component of
X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 8a713f1e965..a3e10dc7cc2 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -11,6 +11,9 @@
#include <asm/smp.h>
#include "agp.h"
+int intel_agp_enabled;
+EXPORT_SYMBOL(intel_agp_enabled);
+
/*
* If we have Intel graphics, we're not going to have anything other than
* an Intel IOMMU. So make the correct use of the PCI DMA API contingent
@@ -65,6 +68,10 @@
#define PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB 0x0062
#define PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB 0x006a
#define PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG 0x0046
+#define PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB 0x0100
+#define PCI_DEVICE_ID_INTEL_SANDYBRIDGE_IG 0x0102
+#define PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB 0x0104
+#define PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_IG 0x0106
/* cover 915 and 945 variants */
#define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \
@@ -99,7 +106,9 @@
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB || \
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB)
extern int agp_memory_reserved;
@@ -148,6 +157,25 @@ extern int agp_memory_reserved;
#define INTEL_I7505_AGPCTRL 0x70
#define INTEL_I7505_MCHCFG 0x50
+#define SNB_GMCH_CTRL 0x50
+#define SNB_GMCH_GMS_STOLEN_MASK 0xF8
+#define SNB_GMCH_GMS_STOLEN_32M (1 << 3)
+#define SNB_GMCH_GMS_STOLEN_64M (2 << 3)
+#define SNB_GMCH_GMS_STOLEN_96M (3 << 3)
+#define SNB_GMCH_GMS_STOLEN_128M (4 << 3)
+#define SNB_GMCH_GMS_STOLEN_160M (5 << 3)
+#define SNB_GMCH_GMS_STOLEN_192M (6 << 3)
+#define SNB_GMCH_GMS_STOLEN_224M (7 << 3)
+#define SNB_GMCH_GMS_STOLEN_256M (8 << 3)
+#define SNB_GMCH_GMS_STOLEN_288M (9 << 3)
+#define SNB_GMCH_GMS_STOLEN_320M (0xa << 3)
+#define SNB_GMCH_GMS_STOLEN_352M (0xb << 3)
+#define SNB_GMCH_GMS_STOLEN_384M (0xc << 3)
+#define SNB_GMCH_GMS_STOLEN_416M (0xd << 3)
+#define SNB_GMCH_GMS_STOLEN_448M (0xe << 3)
+#define SNB_GMCH_GMS_STOLEN_480M (0xf << 3)
+#define SNB_GMCH_GMS_STOLEN_512M (0x10 << 3)
+
static const struct aper_size_info_fixed intel_i810_sizes[] =
{
{64, 16384, 4},
@@ -270,7 +298,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem,
j++;
}
} else {
- /* sg may merge pages, but we have to seperate
+ /* sg may merge pages, but we have to separate
* per-page addr for GTT */
unsigned int len, m;
@@ -294,6 +322,13 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem,
off_t pg_start, int mask_type)
{
int i, j;
+ u32 cache_bits = 0;
+
+ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB)
+ {
+ cache_bits = I830_PTE_SYSTEM_CACHED;
+ }
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
writel(agp_bridge->driver->mask_memory(agp_bridge,
@@ -614,7 +649,7 @@ static struct aper_size_info_fixed intel_i830_sizes[] =
static void intel_i830_init_gtt_entries(void)
{
u16 gmch_ctrl;
- int gtt_entries;
+ int gtt_entries = 0;
u8 rdct;
int local = 0;
static const int ddt[4] = { 0, 16, 32, 64 };
@@ -706,6 +741,63 @@ static void intel_i830_init_gtt_entries(void)
gtt_entries = 0;
break;
}
+ } else if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB) {
+ /*
+ * SandyBridge has new memory control reg at 0x50.w
+ */
+ u16 snb_gmch_ctl;
+ pci_read_config_word(intel_private.pcidev, SNB_GMCH_CTRL, &snb_gmch_ctl);
+ switch (snb_gmch_ctl & SNB_GMCH_GMS_STOLEN_MASK) {
+ case SNB_GMCH_GMS_STOLEN_32M:
+ gtt_entries = MB(32) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_64M:
+ gtt_entries = MB(64) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_96M:
+ gtt_entries = MB(96) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_128M:
+ gtt_entries = MB(128) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_160M:
+ gtt_entries = MB(160) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_192M:
+ gtt_entries = MB(192) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_224M:
+ gtt_entries = MB(224) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_256M:
+ gtt_entries = MB(256) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_288M:
+ gtt_entries = MB(288) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_320M:
+ gtt_entries = MB(320) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_352M:
+ gtt_entries = MB(352) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_384M:
+ gtt_entries = MB(384) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_416M:
+ gtt_entries = MB(416) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_448M:
+ gtt_entries = MB(448) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_480M:
+ gtt_entries = MB(480) - KB(size);
+ break;
+ case SNB_GMCH_GMS_STOLEN_512M:
+ gtt_entries = MB(512) - KB(size);
+ break;
+ }
} else {
switch (gmch_ctrl & I855_GMCH_GMS_MASK) {
case I855_GMCH_GMS_STOLEN_1M:
@@ -1357,6 +1449,8 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
case PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB:
case PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB:
case PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB:
+ case PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB:
+ case PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB:
*gtt_offset = *gtt_size = MB(2);
break;
default:
@@ -2338,9 +2432,9 @@ static const struct intel_driver_description {
NULL, &intel_g33_driver },
{ PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33",
NULL, &intel_g33_driver },
- { PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB, PCI_DEVICE_ID_INTEL_PINEVIEW_M_IG, 0, "Pineview",
+ { PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB, PCI_DEVICE_ID_INTEL_PINEVIEW_M_IG, 0, "GMA3150",
NULL, &intel_g33_driver },
- { PCI_DEVICE_ID_INTEL_PINEVIEW_HB, PCI_DEVICE_ID_INTEL_PINEVIEW_IG, 0, "Pineview",
+ { PCI_DEVICE_ID_INTEL_PINEVIEW_HB, PCI_DEVICE_ID_INTEL_PINEVIEW_IG, 0, "GMA3150",
NULL, &intel_g33_driver },
{ PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0,
"GM45", NULL, &intel_i965_driver },
@@ -2355,13 +2449,17 @@ static const struct intel_driver_description {
{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0,
"G41", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG, 0,
- "Ironlake/D", NULL, &intel_i965_driver },
+ "HD Graphics", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG, 0,
- "Ironlake/M", NULL, &intel_i965_driver },
+ "HD Graphics", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG, 0,
- "Ironlake/MA", NULL, &intel_i965_driver },
+ "HD Graphics", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG, 0,
- "Ironlake/MC2", NULL, &intel_i965_driver },
+ "HD Graphics", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB, PCI_DEVICE_ID_INTEL_SANDYBRIDGE_IG, 0,
+ "Sandybridge", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB, PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_IG, 0,
+ "Sandybridge", NULL, &intel_i965_driver },
{ 0, 0, 0, NULL, NULL, NULL }
};
@@ -2371,7 +2469,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
struct agp_bridge_data *bridge;
u8 cap_ptr = 0;
struct resource *r;
- int i;
+ int i, err;
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
@@ -2463,7 +2561,10 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
}
pci_set_drvdata(pdev, bridge);
- return agp_add_bridge(bridge);
+ err = agp_add_bridge(bridge);
+ if (!err)
+ intel_agp_enabled = 1;
+ return err;
}
static void __devexit agp_intel_remove(struct pci_dev *pdev)
@@ -2568,6 +2669,8 @@ static struct pci_device_id agp_intel_pci_table[] = {
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB),
ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB),
+ ID(PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB),
+ ID(PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB),
{ }
};
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index fe2cb2f5db1..a7424bf7eac 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -14,7 +14,7 @@
/* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */
/* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */
/* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */
-/* adresses de base des cartes, IOCTL 6 plus complet */
+/* addresses de base des cartes, IOCTL 6 plus complet */
/* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */
/* de code autre que le texte V2.6.1 en V2.8.0 */
/*****************************************************************************/
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 4254457d391..b861c08263a 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -158,13 +158,11 @@ static unsigned int cy_isa_addresses[] = {
#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
-#ifdef MODULE
static long maddr[NR_CARDS];
static int irq[NR_CARDS];
module_param_array(maddr, long, NULL, 0);
module_param_array(irq, int, NULL, 0);
-#endif
#endif /* CONFIG_ISA */
@@ -598,12 +596,6 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
save_car = readb(base_addr + (CyCAR << index));
cy_writeb(base_addr + (CyCAR << index), save_xir);
- /* validate the port# (as configured and open) */
- if (channel + chip * 4 >= cinfo->nports) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) & ~CyTxRdy);
- goto end;
- }
info = &cinfo->ports[channel + chip * 4];
tty = tty_port_tty_get(&info->port);
if (tty == NULL) {
@@ -3316,13 +3308,10 @@ static int __init cy_detect_isa(void)
unsigned short cy_isa_irq, nboard;
void __iomem *cy_isa_address;
unsigned short i, j, cy_isa_nchan;
-#ifdef MODULE
int isparam = 0;
-#endif
nboard = 0;
-#ifdef MODULE
/* Check for module parameters */
for (i = 0; i < NR_CARDS; i++) {
if (maddr[i] || i) {
@@ -3332,7 +3321,6 @@ static int __init cy_detect_isa(void)
if (!maddr[i])
break;
}
-#endif
/* scan the address table probing for Cyclom-Y/ISA boards */
for (i = 0; i < NR_ISA_ADDRS; i++) {
@@ -3353,11 +3341,10 @@ static int __init cy_detect_isa(void)
iounmap(cy_isa_address);
continue;
}
-#ifdef MODULE
+
if (isparam && i < NR_CARDS && irq[i])
cy_isa_irq = irq[i];
else
-#endif
/* find out the board's irq by probing */
cy_isa_irq = detect_isa_irq(cy_isa_address);
if (cy_isa_irq == 0) {
@@ -4208,3 +4195,4 @@ module_exit(cy_cleanup_module);
MODULE_LICENSE("GPL");
MODULE_VERSION(CY_VERSION);
MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR);
+MODULE_FIRMWARE("cyzfirm.bin");
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 4c3b59be286..465185fc0f5 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -146,7 +146,7 @@ static void hvc_console_print(struct console *co, const char *b,
return;
/* This console adapter was removed so it is not usable. */
- if (vtermnos[index] < 0)
+ if (vtermnos[index] == -1)
return;
while (count > 0 || i > 0) {
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index fd0242676a2..21c54955084 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event)
if (!hvlpevent_is_int(event)) {
printk(KERN_WARNING
- "hvc: got unexpected close acknowlegement\n");
+ "hvc: got unexpected close acknowledgement\n");
return;
}
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 21681a81cc3..37b0542a4ee 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -139,6 +139,8 @@ struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num)
*
* This function allocates a new struct iucv_tty_buffer element and, optionally,
* allocates an internal data buffer with the specified size @size.
+ * The internal data buffer is always allocated with GFP_DMA which is
+ * required for receiving and sending data with IUCV.
* Note: The total message size arises from the internal buffer size and the
* members of the iucv_tty_msg structure.
* The function returns NULL if memory allocation has failed.
@@ -154,7 +156,7 @@ static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags)
if (size > 0) {
bufp->msg.length = MSG_SIZE(size);
- bufp->mbuf = kmalloc(bufp->msg.length, flags);
+ bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA);
if (!bufp->mbuf) {
mempool_free(bufp, hvc_iucv_mempool);
return NULL;
@@ -237,7 +239,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
if (!rb->mbuf) { /* message not yet received ... */
/* allocate mem to store msg data; if no memory is available
* then leave the buffer on the list and re-try later */
- rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC);
+ rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA);
if (!rb->mbuf)
return -ENOMEM;
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 9b3e09cd41f..10f868eefaa 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
* x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1
*
* The RNG_CTL_VCO value of each noise cell must be programmed
- * seperately. This is why 4 control register values must be provided
+ * separately. This is why 4 control register values must be provided
* to the hypervisor. During a write, the hypervisor writes them all,
* one at a time, to the actual RNG_CTL register. The first three
* values are used to setup the desired RNG_CTL_VCO for each entropy
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
index 8aa6e7ab8d5..c0ba6c05f0c 100644
--- a/drivers/char/ip2/i2hw.h
+++ b/drivers/char/ip2/i2hw.h
@@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways:
2) It may be hard-coded into your source by including a .h file (typically
supplied by Computone), which declares a data array and initializes every
- element. This acheives the same result as if an entire loadware file had
+ element. This achieves the same result as if an entire loadware file had
been read into the array.
This requires more data space in your program, but access to the file system
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 517271c762e..911e1da6def 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -208,6 +208,7 @@ static int DumpFifoBuffer( char __user *, int);
static void ip2_init_board(int, const struct firmware *);
static unsigned short find_eisa_board(int);
+static int ip2_setup(char *str);
/***************/
/* Static Data */
@@ -263,7 +264,7 @@ static int tracewrap;
/* Macros */
/**********/
-#if defined(MODULE) && defined(IP2DEBUG_OPEN)
+#ifdef IP2DEBUG_OPEN
#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
tty->name,(pCh->flags), \
tty->count,/*GET_USE_COUNT(module)*/0,s)
@@ -285,7 +286,10 @@ MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
MODULE_LICENSE("GPL");
+#define MAX_CMD_STR 50
+
static int poll_only;
+static char cmd[MAX_CMD_STR];
static int Eisa_irq;
static int Eisa_slot;
@@ -309,6 +313,8 @@ module_param_array(io, int, NULL, 0);
MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
module_param(poll_only, bool, 0);
MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
+module_param_string(ip2, cmd, MAX_CMD_STR, 0);
+MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='");
/* for sysfs class support */
static struct class *ip2_class;
@@ -487,7 +493,6 @@ static const struct firmware *ip2_request_firmware(void)
return fw;
}
-#ifndef MODULE
/******************************************************************************
* ip2_setup:
* str: kernel command line string
@@ -531,7 +536,6 @@ static int __init ip2_setup(char *str)
return 1;
}
__setup("ip2=", ip2_setup);
-#endif /* !MODULE */
static int __init ip2_loadmain(void)
{
@@ -539,14 +543,20 @@ static int __init ip2_loadmain(void)
int err = 0;
i2eBordStrPtr pB = NULL;
int rc = -1;
- struct pci_dev *pdev = NULL;
const struct firmware *fw = NULL;
+ char *str;
+
+ str = cmd;
if (poll_only) {
/* Hard lock the interrupts to zero */
irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
}
+ /* Check module parameter with 'ip2=' has been passed or not */
+ if (!poll_only && (!strncmp(str, "ip2=", 4)))
+ ip2_setup(str);
+
ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
/* process command line arguments to modprobe or
@@ -612,6 +622,7 @@ static int __init ip2_loadmain(void)
case PCI:
#ifdef CONFIG_PCI
{
+ struct pci_dev *pdev = NULL;
u32 addr;
int status;
@@ -626,7 +637,7 @@ static int __init ip2_loadmain(void)
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev, "can't enable device\n");
- break;
+ goto out;
}
ip2config.type[i] = PCI;
ip2config.pci_dev[i] = pci_dev_get(pdev);
@@ -638,6 +649,8 @@ static int __init ip2_loadmain(void)
dev_err(&pdev->dev, "I/O address error\n");
ip2config.irq[i] = pdev->irq;
+out:
+ pci_dev_put(pdev);
}
#else
printk(KERN_ERR "IP2: PCI card specified but PCI "
@@ -656,7 +669,6 @@ static int __init ip2_loadmain(void)
break;
} /* switch */
} /* for */
- pci_dev_put(pdev);
for (i = 0; i < IP2_MAX_BOARDS; ++i) {
if (ip2config.addr[i]) {
@@ -3197,3 +3209,5 @@ static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
};
MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
+
+MODULE_FIRMWARE("intelliport2.bin");
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 176f1751237..4462b113ba3 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -295,6 +295,9 @@ struct smi_info {
static int force_kipmid[SI_MAX_PARMS];
static int num_force_kipmid;
+static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
+static int num_max_busy_us;
+
static int unload_when_empty = 1;
static int try_smi_init(struct smi_info *smi);
@@ -925,23 +928,77 @@ static void set_run_to_completion(void *send_info, int i_run_to_completion)
}
}
+/*
+ * Use -1 in the nsec value of the busy waiting timespec to tell that
+ * we are spinning in kipmid looking for something and not delaying
+ * between checks
+ */
+static inline void ipmi_si_set_not_busy(struct timespec *ts)
+{
+ ts->tv_nsec = -1;
+}
+static inline int ipmi_si_is_busy(struct timespec *ts)
+{
+ return ts->tv_nsec != -1;
+}
+
+static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
+ const struct smi_info *smi_info,
+ struct timespec *busy_until)
+{
+ unsigned int max_busy_us = 0;
+
+ if (smi_info->intf_num < num_max_busy_us)
+ max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
+ if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
+ ipmi_si_set_not_busy(busy_until);
+ else if (!ipmi_si_is_busy(busy_until)) {
+ getnstimeofday(busy_until);
+ timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+ } else {
+ struct timespec now;
+ getnstimeofday(&now);
+ if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+ ipmi_si_set_not_busy(busy_until);
+ return 0;
+ }
+ }
+ return 1;
+}
+
+
+/*
+ * A busy-waiting loop for speeding up IPMI operation.
+ *
+ * Lousy hardware makes this hard. This is only enabled for systems
+ * that are not BT and do not have interrupts. It starts spinning
+ * when an operation is complete or until max_busy tells it to stop
+ * (if that is enabled). See the paragraph on kimid_max_busy_us in
+ * Documentation/IPMI.txt for details.
+ */
static int ipmi_thread(void *data)
{
struct smi_info *smi_info = data;
unsigned long flags;
enum si_sm_result smi_result;
+ struct timespec busy_until;
+ ipmi_si_set_not_busy(&busy_until);
set_user_nice(current, 19);
while (!kthread_should_stop()) {
+ int busy_wait;
+
spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+ busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
+ &busy_until);
if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
; /* do nothing */
- else if (smi_result == SI_SM_CALL_WITH_DELAY)
+ else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
schedule();
else
- schedule_timeout_interruptible(1);
+ schedule_timeout_interruptible(0);
}
return 0;
}
@@ -1144,7 +1201,7 @@ static int regsizes[SI_MAX_PARMS];
static unsigned int num_regsizes;
static int regshifts[SI_MAX_PARMS];
static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS];
+static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
static unsigned int num_slave_addrs;
#define IPMI_IO_ADDR_SPACE 0
@@ -1212,6 +1269,11 @@ module_param(unload_when_empty, int, 0);
MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
" specified or found, default is 1. Setting to 0"
" is useful for hot add of devices using hotmod.");
+module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
+MODULE_PARM_DESC(kipmid_max_busy_us,
+ "Max time (in microseconds) to busy-wait for IPMI data before"
+ " sleeping. 0 (default) means to wait forever. Set to 100-500"
+ " if kipmid is using up a lot of CPU time.");
static void std_irq_cleanup(struct smi_info *info)
@@ -1607,7 +1669,7 @@ static int hotmod_handler(const char *val, struct kernel_param *kp)
regsize = 1;
regshift = 0;
irq = 0;
- ipmb = 0x20;
+ ipmb = 0; /* Choose the default if not specified */
next = strchr(curr, ':');
if (next) {
@@ -1799,6 +1861,7 @@ static __devinit void hardcode_find_bmc(void)
info->irq = irqs[i];
if (info->irq)
info->irq_setup = std_irq_setup;
+ info->slave_addr = slave_addrs[i];
try_smi_init(info);
}
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 300d5bd6cd0..be2e8f9a27c 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -113,6 +113,8 @@
* 64-bit verification
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
@@ -140,7 +142,6 @@
#define InterruptTheCard(base) outw(0, (base) + 0xc)
#define ClearInterrupt(base) inw((base) + 0x0a)
-#define pr_dbg(str...) pr_debug("ISICOM: " str)
#ifdef DEBUG
#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
#else
@@ -249,8 +250,7 @@ static int lock_card(struct isi_board *card)
spin_unlock_irqrestore(&card->card_lock, card->flags);
msleep(10);
}
- printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
- card->base);
+ pr_warning("Failed to lock Card (0x%lx)\n", card->base);
return 0; /* Failed to acquire the card! */
}
@@ -379,13 +379,13 @@ static inline int __isicom_paranoia_check(struct isi_port const *port,
char *name, const char *routine)
{
if (!port) {
- printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
+ name, routine);
return 1;
}
if (port->magic != ISICOM_MAGIC) {
- printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
+ name, routine);
return 1;
}
@@ -450,8 +450,8 @@ static void isicom_tx(unsigned long _data)
if (!(inw(base + 0x02) & (1 << port->channel)))
continue;
- pr_dbg("txing %d bytes, port%d.\n", txcount,
- port->channel + 1);
+ pr_debug("txing %d bytes, port%d.\n",
+ txcount, port->channel + 1);
outw((port->channel << isi_card[card].shift_count) | txcount,
base);
residue = NO;
@@ -547,8 +547,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
byte_count = header & 0xff;
if (channel + 1 > card->port_count) {
- printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
- "%d(channel) > port_count.\n", base, channel+1);
+ pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
+ __func__, base, channel+1);
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
@@ -582,14 +582,15 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
- pr_dbg("interrupt: DCD->low.\n"
- );
+ pr_debug("%s: DCD->low.\n",
+ __func__);
port->status &= ~ISI_DCD;
tty_hangup(tty);
}
} else if (header & ISI_DCD) {
/* Carrier has been detected */
- pr_dbg("interrupt: DCD->high.\n");
+ pr_debug("%s: DCD->high.\n",
+ __func__);
port->status |= ISI_DCD;
wake_up_interruptible(&port->port.open_wait);
}
@@ -641,17 +642,19 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
break;
case 2: /* Statistics */
- pr_dbg("isicom_interrupt: stats!!!.\n");
+ pr_debug("%s: stats!!!\n", __func__);
break;
default:
- pr_dbg("Intr: Unknown code in status packet.\n");
+ pr_debug("%s: Unknown code in status packet.\n",
+ __func__);
break;
}
} else { /* Data Packet */
count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
- pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
+ pr_debug("%s: Can rx %d of %d bytes.\n",
+ __func__, count, byte_count);
word_count = count >> 1;
insw(base, rp, word_count);
byte_count -= (word_count << 1);
@@ -661,8 +664,8 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
byte_count -= 2;
}
if (byte_count > 0) {
- pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
- "bytes...\n", base, channel + 1);
+ pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
+ __func__, base, channel + 1);
/* drain out unread xtra data */
while (byte_count > 0) {
inw(base);
@@ -888,8 +891,8 @@ static void isicom_shutdown_port(struct isi_port *port)
struct isi_board *card = port->card;
if (--card->count < 0) {
- pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
- card->base, card->count);
+ pr_debug("%s: bad board(0x%lx) count %d.\n",
+ __func__, card->base, card->count);
card->count = 0;
}
/* last port was closed, shutdown that board too */
@@ -1681,13 +1684,13 @@ static int __init isicom_init(void)
retval = tty_register_driver(isicom_normal);
if (retval) {
- pr_dbg("Couldn't register the dialin driver\n");
+ pr_debug("Couldn't register the dialin driver\n");
goto err_puttty;
}
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
- printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
+ pr_err("Unable to register pci driver.\n");
goto err_unrtty;
}
@@ -1717,3 +1720,8 @@ module_exit(isicom_exit);
MODULE_AUTHOR("MultiTech");
MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("isi608.bin");
+MODULE_FIRMWARE("isi608em.bin");
+MODULE_FIRMWARE("isi616em.bin");
+MODULE_FIRMWARE("isi4608.bin");
+MODULE_FIRMWARE("isi4616.bin");
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 48788db4e28..1f3215ac085 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
- * Added devfs support.
+ * Added devfs support.
* Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
* Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
*/
@@ -44,36 +44,6 @@ static inline unsigned long size_inside_page(unsigned long start,
return min(sz, size);
}
-/*
- * Architectures vary in how they handle caching for addresses
- * outside of main memory.
- *
- */
-static inline int uncached_access(struct file *file, unsigned long addr)
-{
-#if defined(CONFIG_IA64)
- /*
- * On ia64, we ignore O_DSYNC because we cannot tolerate memory attribute aliases.
- */
- return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
-#elif defined(CONFIG_MIPS)
- {
- extern int __uncached_access(struct file *file,
- unsigned long addr);
-
- return __uncached_access(file, addr);
- }
-#else
- /*
- * Accessing memory above the top the kernel knows about or through a file pointer
- * that was marked O_DSYNC will be done non-cached.
- */
- if (file->f_flags & O_DSYNC)
- return 1;
- return addr >= __pa(high_memory);
-#endif
-}
-
#ifndef ARCH_HAS_VALID_PHYS_ADDR_RANGE
static inline int valid_phys_addr_range(unsigned long addr, size_t count)
{
@@ -115,15 +85,15 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
}
#endif
-void __attribute__((weak)) unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+void __weak unxlate_dev_mem_ptr(unsigned long phys, void *addr)
{
}
/*
- * This funcion reads the *physical* memory. The f_pos points directly to the
- * memory location.
+ * This funcion reads the *physical* memory. The f_pos points directly to the
+ * memory location.
*/
-static ssize_t read_mem(struct file * file, char __user * buf,
+static ssize_t read_mem(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
@@ -140,10 +110,10 @@ static ssize_t read_mem(struct file * file, char __user * buf,
if (sz > 0) {
if (clear_user(buf, sz))
return -EFAULT;
- buf += sz;
- p += sz;
- count -= sz;
- read += sz;
+ buf += sz;
+ p += sz;
+ count -= sz;
+ read += sz;
}
}
#endif
@@ -157,9 +127,9 @@ static ssize_t read_mem(struct file * file, char __user * buf,
return -EPERM;
/*
- * On ia64 if a page has been mapped somewhere as
- * uncached, then it must also be accessed uncached
- * by the kernel or data corruption may occur
+ * On ia64 if a page has been mapped somewhere as uncached, then
+ * it must also be accessed uncached by the kernel or data
+ * corruption may occur.
*/
ptr = xlate_dev_mem_ptr(p);
if (!ptr)
@@ -180,7 +150,7 @@ static ssize_t read_mem(struct file * file, char __user * buf,
return read;
}
-static ssize_t write_mem(struct file * file, const char __user * buf,
+static ssize_t write_mem(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
@@ -212,9 +182,9 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
return -EPERM;
/*
- * On ia64 if a page has been mapped somewhere as
- * uncached, then it must also be accessed uncached
- * by the kernel or data corruption may occur
+ * On ia64 if a page has been mapped somewhere as uncached, then
+ * it must also be accessed uncached by the kernel or data
+ * corruption may occur.
*/
ptr = xlate_dev_mem_ptr(p);
if (!ptr) {
@@ -242,13 +212,46 @@ static ssize_t write_mem(struct file * file, const char __user * buf,
return written;
}
-int __attribute__((weak)) phys_mem_access_prot_allowed(struct file *file,
+int __weak phys_mem_access_prot_allowed(struct file *file,
unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
{
return 1;
}
#ifndef __HAVE_PHYS_MEM_ACCESS_PROT
+
+/*
+ * Architectures vary in how they handle caching for addresses
+ * outside of main memory.
+ *
+ */
+static int uncached_access(struct file *file, unsigned long addr)
+{
+#if defined(CONFIG_IA64)
+ /*
+ * On ia64, we ignore O_DSYNC because we cannot tolerate memory
+ * attribute aliases.
+ */
+ return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
+#elif defined(CONFIG_MIPS)
+ {
+ extern int __uncached_access(struct file *file,
+ unsigned long addr);
+
+ return __uncached_access(file, addr);
+ }
+#else
+ /*
+ * Accessing memory above the top the kernel knows about or through a
+ * file pointer
+ * that was marked O_DSYNC will be done non-cached.
+ */
+ if (file->f_flags & O_DSYNC)
+ return 1;
+ return addr >= __pa(high_memory);
+#endif
+}
+
static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
@@ -294,7 +297,7 @@ static const struct vm_operations_struct mmap_mem_ops = {
#endif
};
-static int mmap_mem(struct file * file, struct vm_area_struct * vma)
+static int mmap_mem(struct file *file, struct vm_area_struct *vma)
{
size_t size = vma->vm_end - vma->vm_start;
@@ -329,7 +332,7 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
}
#ifdef CONFIG_DEVKMEM
-static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
+static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
{
unsigned long pfn;
@@ -337,9 +340,9 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
/*
- * RED-PEN: on some architectures there is more mapped memory
- * than available in mem_map which pfn_valid checks
- * for. Perhaps should add a new macro here.
+ * RED-PEN: on some architectures there is more mapped memory than
+ * available in mem_map which pfn_valid checks for. Perhaps should add a
+ * new macro here.
*
* RED-PEN: vmalloc is not supported right now.
*/
@@ -389,7 +392,7 @@ static ssize_t read_oldmem(struct file *file, char __user *buf,
/*
* This function reads the *virtual* memory as seen by the kernel.
*/
-static ssize_t read_kmem(struct file *file, char __user *buf,
+static ssize_t read_kmem(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
@@ -400,8 +403,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
read = 0;
if (p < (unsigned long) high_memory) {
low_count = count;
- if (count > (unsigned long) high_memory - p)
- low_count = (unsigned long) high_memory - p;
+ if (count > (unsigned long)high_memory - p)
+ low_count = (unsigned long)high_memory - p;
#ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED
/* we don't have page 0 mapped on sparc and m68k.. */
@@ -465,9 +468,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
}
-static inline ssize_t
-do_write_kmem(unsigned long p, const char __user *buf,
- size_t count, loff_t *ppos)
+static ssize_t do_write_kmem(unsigned long p, const char __user *buf,
+ size_t count, loff_t *ppos)
{
ssize_t written, sz;
unsigned long copied;
@@ -491,9 +493,9 @@ do_write_kmem(unsigned long p, const char __user *buf,
sz = size_inside_page(p, count);
/*
- * On ia64 if a page has been mapped somewhere as
- * uncached, then it must also be accessed uncached
- * by the kernel or data corruption may occur
+ * On ia64 if a page has been mapped somewhere as uncached, then
+ * it must also be accessed uncached by the kernel or data
+ * corruption may occur.
*/
ptr = xlate_dev_kmem_ptr((char *)p);
@@ -514,11 +516,10 @@ do_write_kmem(unsigned long p, const char __user *buf,
return written;
}
-
/*
* This function writes to the *virtual* memory as seen by the kernel.
*/
-static ssize_t write_kmem(struct file * file, const char __user * buf,
+static ssize_t write_kmem(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
@@ -570,17 +571,17 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
#endif
#ifdef CONFIG_DEVPORT
-static ssize_t read_port(struct file * file, char __user * buf,
+static ssize_t read_port(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long i = *ppos;
char __user *tmp = buf;
if (!access_ok(VERIFY_WRITE, buf, count))
- return -EFAULT;
+ return -EFAULT;
while (count-- > 0 && i < 65536) {
- if (__put_user(inb(i),tmp) < 0)
- return -EFAULT;
+ if (__put_user(inb(i), tmp) < 0)
+ return -EFAULT;
i++;
tmp++;
}
@@ -588,22 +589,22 @@ static ssize_t read_port(struct file * file, char __user * buf,
return tmp-buf;
}
-static ssize_t write_port(struct file * file, const char __user * buf,
+static ssize_t write_port(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
unsigned long i = *ppos;
const char __user * tmp = buf;
- if (!access_ok(VERIFY_READ,buf,count))
+ if (!access_ok(VERIFY_READ, buf, count))
return -EFAULT;
while (count-- > 0 && i < 65536) {
char c;
if (__get_user(c, tmp)) {
if (tmp > buf)
break;
- return -EFAULT;
+ return -EFAULT;
}
- outb(c,i);
+ outb(c, i);
i++;
tmp++;
}
@@ -612,13 +613,13 @@ static ssize_t write_port(struct file * file, const char __user * buf,
}
#endif
-static ssize_t read_null(struct file * file, char __user * buf,
+static ssize_t read_null(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return 0;
}
-static ssize_t write_null(struct file * file, const char __user * buf,
+static ssize_t write_null(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
return count;
@@ -630,13 +631,13 @@ static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf,
return sd->len;
}
-static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
+static ssize_t splice_write_null(struct pipe_inode_info *pipe, struct file *out,
loff_t *ppos, size_t len, unsigned int flags)
{
return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
}
-static ssize_t read_zero(struct file * file, char __user * buf,
+static ssize_t read_zero(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
size_t written;
@@ -667,7 +668,7 @@ static ssize_t read_zero(struct file * file, char __user * buf,
return written ? written : -EFAULT;
}
-static int mmap_zero(struct file * file, struct vm_area_struct * vma)
+static int mmap_zero(struct file *file, struct vm_area_struct *vma)
{
#ifndef CONFIG_MMU
return -ENOSYS;
@@ -677,7 +678,7 @@ static int mmap_zero(struct file * file, struct vm_area_struct * vma)
return 0;
}
-static ssize_t write_full(struct file * file, const char __user * buf,
+static ssize_t write_full(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
return -ENOSPC;
@@ -688,8 +689,7 @@ static ssize_t write_full(struct file * file, const char __user * buf,
* can fopen() both devices with "a" now. This was previously impossible.
* -- SRB.
*/
-
-static loff_t null_lseek(struct file * file, loff_t offset, int orig)
+static loff_t null_lseek(struct file *file, loff_t offset, int orig)
{
return file->f_pos = 0;
}
@@ -702,24 +702,31 @@ static loff_t null_lseek(struct file * file, loff_t offset, int orig)
* also note that seeking relative to the "end of file" isn't supported:
* it has no meaning, so it returns -EINVAL.
*/
-static loff_t memory_lseek(struct file * file, loff_t offset, int orig)
+static loff_t memory_lseek(struct file *file, loff_t offset, int orig)
{
loff_t ret;
mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
switch (orig) {
- case 0:
- file->f_pos = offset;
- ret = file->f_pos;
- force_successful_syscall_return();
+ case SEEK_CUR:
+ offset += file->f_pos;
+ if ((unsigned long long)offset <
+ (unsigned long long)file->f_pos) {
+ ret = -EOVERFLOW;
break;
- case 1:
- file->f_pos += offset;
- ret = file->f_pos;
- force_successful_syscall_return();
+ }
+ case SEEK_SET:
+ /* to avoid userland mistaking f_pos=-9 as -EBADF=-9 */
+ if ((unsigned long long)offset >= ~0xFFFULL) {
+ ret = -EOVERFLOW;
break;
- default:
- ret = -EINVAL;
+ }
+ file->f_pos = offset;
+ ret = file->f_pos;
+ force_successful_syscall_return();
+ break;
+ default:
+ ret = -EINVAL;
}
mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return ret;
@@ -803,7 +810,7 @@ static const struct file_operations oldmem_fops = {
};
#endif
-static ssize_t kmsg_write(struct file * file, const char __user * buf,
+static ssize_t kmsg_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
char *tmp;
@@ -825,7 +832,7 @@ static ssize_t kmsg_write(struct file * file, const char __user * buf,
}
static const struct file_operations kmsg_fops = {
- .write = kmsg_write,
+ .write = kmsg_write,
};
static const struct memdev {
@@ -876,7 +883,7 @@ static int memory_open(struct inode *inode, struct file *filp)
}
static const struct file_operations memory_fops = {
- .open = memory_open,
+ .open = memory_open,
};
static char *mem_devnode(struct device *dev, mode_t *mode)
@@ -897,7 +904,7 @@ static int __init chr_dev_init(void)
if (err)
return err;
- if (register_chrdev(MEM_MAJOR,"mem",&memory_fops))
+ if (register_chrdev(MEM_MAJOR, "mem", &memory_fops))
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
mem_class = class_create(THIS_MODULE, "mem");
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 918711aa56f..04fd0d843b3 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -546,7 +546,7 @@ static void mmtimer_tasklet(unsigned long data)
{
int nodeid = data;
struct mmtimer_node *mn = &timers[nodeid];
- struct mmtimer *x = rb_entry(mn->next, struct mmtimer, list);
+ struct mmtimer *x;
struct k_itimer *t;
unsigned long flags;
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 63ee3bbc1ce..166495d6a1d 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -164,24 +164,25 @@ static unsigned int moxaFuncTout = HZ / 2;
static unsigned int moxaLowWaterChk;
static DEFINE_MUTEX(moxa_openlock);
static DEFINE_SPINLOCK(moxa_lock);
-/* Variables for insmod */
-#ifdef MODULE
+
static unsigned long baseaddr[MAX_BOARDS];
static unsigned int type[MAX_BOARDS];
static unsigned int numports[MAX_BOARDS];
-#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
MODULE_LICENSE("GPL");
-#ifdef MODULE
+MODULE_FIRMWARE("c218tunx.cod");
+MODULE_FIRMWARE("cp204unx.cod");
+MODULE_FIRMWARE("c320tunx.cod");
+
module_param_array(type, uint, NULL, 0);
MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
module_param_array(baseaddr, ulong, NULL, 0);
MODULE_PARM_DESC(baseaddr, "base address");
module_param_array(numports, uint, NULL, 0);
MODULE_PARM_DESC(numports, "numports (ignored for C218)");
-#endif
+
module_param(ttymajor, int, 0);
/*
@@ -1024,6 +1025,8 @@ static int __init moxa_init(void)
{
unsigned int isabrds = 0;
int retval = 0;
+ struct moxa_board_conf *brd = moxa_boards;
+ unsigned int i;
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
@@ -1051,10 +1054,7 @@ static int __init moxa_init(void)
}
/* Find the boards defined from module args. */
-#ifdef MODULE
- {
- struct moxa_board_conf *brd = moxa_boards;
- unsigned int i;
+
for (i = 0; i < MAX_BOARDS; i++) {
if (!baseaddr[i])
break;
@@ -1087,8 +1087,6 @@ static int __init moxa_init(void)
isabrds++;
}
}
- }
-#endif
#ifdef CONFIG_PCI
retval = pci_register_driver(&moxa_pci_driver);
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3d923065d9a..e0c5d2a6904 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -895,8 +895,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (inb(info->ioaddr + UART_LSR) == 0xff) {
spin_unlock_irqrestore(&info->slock, flags);
if (capable(CAP_SYS_ADMIN)) {
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
} else
return -ENODEV;
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 2e50f4dfc79..bdae8327143 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -48,6 +48,7 @@
#include <linux/audit.h>
#include <linux/file.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/system.h>
@@ -2091,3 +2092,19 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
.receive_buf = n_tty_receive_buf,
.write_wakeup = n_tty_write_wakeup
};
+
+/**
+ * n_tty_inherit_ops - inherit N_TTY methods
+ * @ops: struct tty_ldisc_ops where to save N_TTY methods
+ *
+ * Used by a generic struct tty_ldisc_ops to easily inherit N_TTY
+ * methods.
+ */
+
+void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
+{
+ *ops = tty_ldisc_N_TTY;
+ ops->owner = NULL;
+ ops->refcount = ops->flags = 0;
+}
+EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 2ad7d37afbd..a3f32a15fde 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -136,10 +136,6 @@ static int debug;
#define RECEIVE_BUF_MAX 4
-/* Define all types of vendors and devices to support */
-#define VENDOR1 0x1931 /* Vendor Option */
-#define DEVICE1 0x000c /* HSDPA card */
-
#define R_IIR 0x0000 /* Interrupt Identity Register */
#define R_FCR 0x0000 /* Flow Control Register */
#define R_IER 0x0004 /* Interrupt Enable Register */
@@ -371,6 +367,8 @@ struct port {
struct mutex tty_sem;
wait_queue_head_t tty_wait;
struct async_icount tty_icount;
+
+ struct nozomi *dc;
};
/* Private data one for each card in the system */
@@ -405,7 +403,7 @@ struct buffer {
/* Global variables */
static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
- {PCI_DEVICE(VENDOR1, DEVICE1)},
+ {PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */
{},
};
@@ -414,6 +412,8 @@ MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl);
static struct nozomi *ndevs[NOZOMI_MAX_CARDS];
static struct tty_driver *ntty_driver;
+static const struct tty_port_operations noz_tty_port_ops;
+
/*
* find card by tty_index
*/
@@ -853,8 +853,6 @@ static int receive_data(enum port_type index, struct nozomi *dc)
goto put;
}
- tty_buffer_request_room(tty, size);
-
while (size > 0) {
read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX);
@@ -1473,9 +1471,11 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
for (i = 0; i < MAX_PORT; i++) {
struct device *tty_dev;
-
- mutex_init(&dc->port[i].tty_sem);
- tty_port_init(&dc->port[i].port);
+ struct port *port = &dc->port[i];
+ port->dc = dc;
+ mutex_init(&port->tty_sem);
+ tty_port_init(&port->port);
+ port->port.ops = &noz_tty_port_ops;
tty_dev = tty_register_device(ntty_driver, dc->index_start + i,
&pdev->dev);
@@ -1600,67 +1600,74 @@ static void set_dtr(const struct tty_struct *tty, int dtr)
* ----------------------------------------------------------------------------
*/
-/* Called when the userspace process opens the tty, /dev/noz*. */
-static int ntty_open(struct tty_struct *tty, struct file *file)
+static int ntty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct port *port = get_port_by_tty(tty);
struct nozomi *dc = get_dc_by_tty(tty);
- unsigned long flags;
-
+ int ret;
if (!port || !dc || dc->state != NOZOMI_STATE_READY)
return -ENODEV;
-
- if (mutex_lock_interruptible(&port->tty_sem))
- return -ERESTARTSYS;
-
- port->port.count++;
- dc->open_ttys++;
-
- /* Enable interrupt downlink for channel */
- if (port->port.count == 1) {
- tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);
- DBG1("open: %d", port->token_dl);
- spin_lock_irqsave(&dc->spin_mutex, flags);
- dc->last_ier = dc->last_ier | port->token_dl;
- writew(dc->last_ier, dc->reg_ier);
- spin_unlock_irqrestore(&dc->spin_mutex, flags);
+ ret = tty_init_termios(tty);
+ if (ret == 0) {
+ tty_driver_kref_get(driver);
+ driver->ttys[tty->index] = tty;
}
- mutex_unlock(&port->tty_sem);
- return 0;
+ return ret;
}
-/* Called when the userspace process close the tty, /dev/noz*. Also
- called immediately if ntty_open fails in which case tty->driver_data
- will be NULL an we exit by the first return */
+static void ntty_cleanup(struct tty_struct *tty)
+{
+ tty->driver_data = NULL;
+}
-static void ntty_close(struct tty_struct *tty, struct file *file)
+static int ntty_activate(struct tty_port *tport, struct tty_struct *tty)
{
- struct nozomi *dc = get_dc_by_tty(tty);
- struct port *nport = tty->driver_data;
- struct tty_port *port = &nport->port;
+ struct port *port = container_of(tport, struct port, port);
+ struct nozomi *dc = port->dc;
unsigned long flags;
- if (!dc || !nport)
- return;
+ DBG1("open: %d", port->token_dl);
+ spin_lock_irqsave(&dc->spin_mutex, flags);
+ dc->last_ier = dc->last_ier | port->token_dl;
+ writew(dc->last_ier, dc->reg_ier);
+ dc->open_ttys++;
+ spin_unlock_irqrestore(&dc->spin_mutex, flags);
+ printk("noz: activated %d: %p\n", tty->index, tport);
+ return 0;
+}
- /* Users cannot interrupt a close */
- mutex_lock(&nport->tty_sem);
+static int ntty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct port *port = get_port_by_tty(tty);
+ return tty_port_open(&port->port, tty, filp);
+}
- WARN_ON(!port->count);
+static void ntty_shutdown(struct tty_port *tport)
+{
+ struct port *port = container_of(tport, struct port, port);
+ struct nozomi *dc = port->dc;
+ unsigned long flags;
+ DBG1("close: %d", port->token_dl);
+ spin_lock_irqsave(&dc->spin_mutex, flags);
+ dc->last_ier &= ~(port->token_dl);
+ writew(dc->last_ier, dc->reg_ier);
dc->open_ttys--;
- port->count--;
+ spin_unlock_irqrestore(&dc->spin_mutex, flags);
+ printk("noz: shutdown %p\n", tport);
+}
- if (port->count == 0) {
- DBG1("close: %d", nport->token_dl);
- tty_port_tty_set(port, NULL);
- spin_lock_irqsave(&dc->spin_mutex, flags);
- dc->last_ier &= ~(nport->token_dl);
- writew(dc->last_ier, dc->reg_ier);
- spin_unlock_irqrestore(&dc->spin_mutex, flags);
- }
- mutex_unlock(&nport->tty_sem);
+static void ntty_close(struct tty_struct *tty, struct file *filp)
+{
+ struct port *port = tty->driver_data;
+ if (port)
+ tty_port_close(&port->port, tty, filp);
+}
+
+static void ntty_hangup(struct tty_struct *tty)
+{
+ struct port *port = tty->driver_data;
+ tty_port_hangup(&port->port);
}
/*
@@ -1680,15 +1687,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer,
if (!dc || !port)
return -ENODEV;
- if (unlikely(!mutex_trylock(&port->tty_sem))) {
- /*
- * must test lock as tty layer wraps calls
- * to this function with BKL
- */
- dev_err(&dc->pdev->dev, "Would have deadlocked - "
- "return EAGAIN\n");
- return -EAGAIN;
- }
+ mutex_lock(&port->tty_sem);
if (unlikely(!port->port.count)) {
DBG1(" ");
@@ -1728,25 +1727,23 @@ exit:
* This method is called by the upper tty layer.
* #according to sources N_TTY.c it expects a value >= 0 and
* does not check for negative values.
+ *
+ * If the port is unplugged report lots of room and let the bits
+ * dribble away so we don't block anything.
*/
static int ntty_write_room(struct tty_struct *tty)
{
struct port *port = tty->driver_data;
- int room = 0;
+ int room = 4096;
const struct nozomi *dc = get_dc_by_tty(tty);
- if (!dc || !port)
- return 0;
- if (!mutex_trylock(&port->tty_sem))
- return 0;
-
- if (!port->port.count)
- goto exit;
-
- room = port->fifo_ul.size - kfifo_len(&port->fifo_ul);
-
-exit:
- mutex_unlock(&port->tty_sem);
+ if (dc) {
+ mutex_lock(&port->tty_sem);
+ if (port->port.count)
+ room = port->fifo_ul.size -
+ kfifo_len(&port->fifo_ul);
+ mutex_unlock(&port->tty_sem);
+ }
return room;
}
@@ -1906,10 +1903,16 @@ exit_in_buffer:
return rval;
}
+static const struct tty_port_operations noz_tty_port_ops = {
+ .activate = ntty_activate,
+ .shutdown = ntty_shutdown,
+};
+
static const struct tty_operations tty_ops = {
.ioctl = ntty_ioctl,
.open = ntty_open,
.close = ntty_close,
+ .hangup = ntty_hangup,
.write = ntty_write,
.write_room = ntty_write_room,
.unthrottle = ntty_unthrottle,
@@ -1917,6 +1920,8 @@ static const struct tty_operations tty_ops = {
.chars_in_buffer = ntty_chars_in_buffer,
.tiocmget = ntty_tiocmget,
.tiocmset = ntty_tiocmset,
+ .install = ntty_install,
+ .cleanup = ntty_cleanup,
};
/* Module initialization */
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 385c44b3034..5ee42481726 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty,
* @tty: tty being resized
* @ws: window size being set.
*
- * Update the termios variables and send the neccessary signals to
+ * Update the termios variables and send the necessary signals to
* peform a terminal resize correctly
*/
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 2849713d223..2fd3d39995d 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1191,7 +1191,7 @@ const struct file_operations urandom_fops = {
void generate_random_uuid(unsigned char uuid_out[16])
{
get_random_bytes(uuid_out, 16);
- /* Set UUID version to 4 --- truely random generation */
+ /* Set UUID version to 4 --- truly random generation */
uuid_out[6] = (uuid_out[6] & 0x0F) | 0x40;
/* Set the UUID variant to DCE */
uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80;
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 452370af95d..1ec3d5cd748 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -658,8 +658,7 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
info->mon.char_max = char_count;
info->mon.char_last = char_count;
#endif
- len = tty_buffer_request_room(tty, char_count);
- while (len--) {
+ while (char_count--) {
data = base_addr[CyRDR];
tty_insert_flip_char(tty, data, TTY_NORMAL);
#ifdef CYCLOM_16Y_HACK
@@ -1990,7 +1989,7 @@ void mvme167_serial_console_setup(int cflag)
/*
* Attempt to set up all channels to something reasonable, and
* bang out a INIT_CHAN command. We should then be able to limit
- * the ammount of fiddling we have to do in normal running.
+ * the amount of fiddling we have to do in normal running.
*/
for (ch = 3; ch >= 0; ch--) {
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 268e17f9ec3..07ac14d949c 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -646,8 +646,6 @@ static void sx_receive(struct specialix_board *bp)
dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
- tty_buffer_request_room(tty, count);
-
while (count--)
tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
tty_flip_buffer_push(tty);
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 4846b73ef28..0658fc54822 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2031,7 +2031,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
return 0;
- if (!tty || !info->xmit_buf)
+ if (!info->xmit_buf)
return 0;
spin_lock_irqsave(&info->irq_spinlock, flags);
@@ -2121,7 +2121,7 @@ static int mgsl_write(struct tty_struct * tty,
if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
goto cleanup;
- if (!tty || !info->xmit_buf)
+ if (!info->xmit_buf)
goto cleanup;
if ( info->params.mode == MGSL_MODE_HDLC ||
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 8678f0c8699..4561ce2fba6 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -468,7 +468,7 @@ static unsigned int free_tbuf_count(struct slgt_info *info);
static unsigned int tbuf_bytes(struct slgt_info *info);
static void reset_tbufs(struct slgt_info *info);
static void tdma_reset(struct slgt_info *info);
-static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
+static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
static void get_signals(struct slgt_info *info);
static void set_signals(struct slgt_info *info);
@@ -813,59 +813,32 @@ static int write(struct tty_struct *tty,
int ret = 0;
struct slgt_info *info = tty->driver_data;
unsigned long flags;
- unsigned int bufs_needed;
if (sanity_check(info, tty->name, "write"))
- goto cleanup;
+ return -EIO;
+
DBGINFO(("%s write count=%d\n", info->device_name, count));
- if (!info->tx_buf)
- goto cleanup;
+ if (!info->tx_buf || (count > info->max_frame_size))
+ return -EIO;
- if (count > info->max_frame_size) {
- ret = -EIO;
- goto cleanup;
- }
+ if (!count || tty->stopped || tty->hw_stopped)
+ return 0;
- if (!count)
- goto cleanup;
+ spin_lock_irqsave(&info->lock, flags);
- if (!info->tx_active && info->tx_count) {
+ if (info->tx_count) {
/* send accumulated data from send_char() */
- tx_load(info, info->tx_buf, info->tx_count);
- goto start;
+ if (!tx_load(info, info->tx_buf, info->tx_count))
+ goto cleanup;
+ info->tx_count = 0;
}
- bufs_needed = (count/DMABUFSIZE);
- if (count % DMABUFSIZE)
- ++bufs_needed;
- if (bufs_needed > free_tbuf_count(info))
- goto cleanup;
- ret = info->tx_count = count;
- tx_load(info, buf, count);
- goto start;
-
-start:
- if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active)
- tx_start(info);
- else if (!(rd_reg32(info, TDCSR) & BIT0)) {
- /* transmit still active but transmit DMA stopped */
- unsigned int i = info->tbuf_current;
- if (!i)
- i = info->tbuf_count;
- i--;
- /* if DMA buf unsent must try later after tx idle */
- if (desc_count(info->tbufs[i]))
- ret = 0;
- }
- if (ret > 0)
- update_tx_timer(info);
- spin_unlock_irqrestore(&info->lock,flags);
- }
+ if (tx_load(info, buf, count))
+ ret = count;
cleanup:
+ spin_unlock_irqrestore(&info->lock, flags);
DBGINFO(("%s write rc=%d\n", info->device_name, ret));
return ret;
}
@@ -882,7 +855,7 @@ static int put_char(struct tty_struct *tty, unsigned char ch)
if (!info->tx_buf)
return 0;
spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active && (info->tx_count < info->max_frame_size)) {
+ if (info->tx_count < info->max_frame_size) {
info->tx_buf[info->tx_count++] = ch;
ret = 1;
}
@@ -981,10 +954,8 @@ static void flush_chars(struct tty_struct *tty)
DBGINFO(("%s flush_chars start transmit\n", info->device_name));
spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active && info->tx_count) {
- tx_load(info, info->tx_buf,info->tx_count);
- tx_start(info);
- }
+ if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
+ info->tx_count = 0;
spin_unlock_irqrestore(&info->lock,flags);
}
@@ -997,10 +968,9 @@ static void flush_buffer(struct tty_struct *tty)
return;
DBGINFO(("%s flush_buffer\n", info->device_name));
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active)
- info->tx_count = 0;
- spin_unlock_irqrestore(&info->lock,flags);
+ spin_lock_irqsave(&info->lock, flags);
+ info->tx_count = 0;
+ spin_unlock_irqrestore(&info->lock, flags);
tty_wakeup(tty);
}
@@ -1033,12 +1003,10 @@ static void tx_release(struct tty_struct *tty)
if (sanity_check(info, tty->name, "tx_release"))
return;
DBGINFO(("%s tx_release\n", info->device_name));
- spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active && info->tx_count) {
- tx_load(info, info->tx_buf, info->tx_count);
- tx_start(info);
- }
- spin_unlock_irqrestore(&info->lock,flags);
+ spin_lock_irqsave(&info->lock, flags);
+ if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
+ info->tx_count = 0;
+ spin_unlock_irqrestore(&info->lock, flags);
}
/*
@@ -1506,27 +1474,25 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
DBGINFO(("%s hdlc_xmit\n", dev->name));
+ if (!skb->len)
+ return NETDEV_TX_OK;
+
/* stop sending until this frame completes */
netif_stop_queue(dev);
- /* copy data to device buffers */
- info->tx_count = skb->len;
- tx_load(info, skb->data, skb->len);
-
/* update network statistics */
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
- /* done with socket buffer, so free it */
- dev_kfree_skb(skb);
-
/* save start time for transmit timeout detection */
dev->trans_start = jiffies;
- spin_lock_irqsave(&info->lock,flags);
- tx_start(info);
- update_tx_timer(info);
- spin_unlock_irqrestore(&info->lock,flags);
+ spin_lock_irqsave(&info->lock, flags);
+ tx_load(info, skb->data, skb->len);
+ spin_unlock_irqrestore(&info->lock, flags);
+
+ /* done with socket buffer, so free it */
+ dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -2180,7 +2146,7 @@ static void isr_serial(struct slgt_info *info)
if (info->params.mode == MGSL_MODE_ASYNC) {
if (status & IRQ_TXIDLE) {
- if (info->tx_count)
+ if (info->tx_active)
isr_txeom(info, status);
}
if (info->rx_pio && (status & IRQ_RXDATA))
@@ -2276,13 +2242,42 @@ static void isr_tdma(struct slgt_info *info)
}
}
+/*
+ * return true if there are unsent tx DMA buffers, otherwise false
+ *
+ * if there are unsent buffers then info->tbuf_start
+ * is set to index of first unsent buffer
+ */
+static bool unsent_tbufs(struct slgt_info *info)
+{
+ unsigned int i = info->tbuf_current;
+ bool rc = false;
+
+ /*
+ * search backwards from last loaded buffer (precedes tbuf_current)
+ * for first unsent buffer (desc_count > 0)
+ */
+
+ do {
+ if (i)
+ i--;
+ else
+ i = info->tbuf_count - 1;
+ if (!desc_count(info->tbufs[i]))
+ break;
+ info->tbuf_start = i;
+ rc = true;
+ } while (i != info->tbuf_current);
+
+ return rc;
+}
+
static void isr_txeom(struct slgt_info *info, unsigned short status)
{
DBGISR(("%s txeom status=%04x\n", info->device_name, status));
slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
tdma_reset(info);
- reset_tbufs(info);
if (status & IRQ_TXUNDER) {
unsigned short val = rd_reg16(info, TCR);
wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
@@ -2297,8 +2292,12 @@ static void isr_txeom(struct slgt_info *info, unsigned short status)
info->icount.txok++;
}
+ if (unsent_tbufs(info)) {
+ tx_start(info);
+ update_tx_timer(info);
+ return;
+ }
info->tx_active = false;
- info->tx_count = 0;
del_timer(&info->tx_timer);
@@ -3949,7 +3948,7 @@ static void tx_start(struct slgt_info *info)
info->tx_enabled = true;
}
- if (info->tx_count) {
+ if (desc_count(info->tbufs[info->tbuf_start])) {
info->drop_rts_on_tx_done = false;
if (info->params.mode != MGSL_MODE_ASYNC) {
@@ -4772,25 +4771,36 @@ static unsigned int tbuf_bytes(struct slgt_info *info)
}
/*
- * load transmit DMA buffer(s) with data
+ * load data into transmit DMA buffer ring and start transmitter if needed
+ * return true if data accepted, otherwise false (buffers full)
*/
-static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
+static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size)
{
unsigned short count;
unsigned int i;
struct slgt_desc *d;
- if (size == 0)
- return;
+ /* check required buffer space */
+ if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info))
+ return false;
DBGDATA(info, buf, size, "tx");
+ /*
+ * copy data to one or more DMA buffers in circular ring
+ * tbuf_start = first buffer for this data
+ * tbuf_current = next free buffer
+ *
+ * Copy all data before making data visible to DMA controller by
+ * setting descriptor count of the first buffer.
+ * This prevents an active DMA controller from reading the first DMA
+ * buffers of a frame and stopping before the final buffers are filled.
+ */
+
info->tbuf_start = i = info->tbuf_current;
while (size) {
d = &info->tbufs[i];
- if (++i == info->tbuf_count)
- i = 0;
count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
memcpy(d->buf, buf, count);
@@ -4808,11 +4818,27 @@ static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
else
set_desc_eof(*d, 0);
- set_desc_count(*d, count);
+ /* set descriptor count for all but first buffer */
+ if (i != info->tbuf_start)
+ set_desc_count(*d, count);
d->buf_count = count;
+
+ if (++i == info->tbuf_count)
+ i = 0;
}
info->tbuf_current = i;
+
+ /* set first buffer count to make new data visible to DMA controller */
+ d = &info->tbufs[info->tbuf_start];
+ set_desc_count(*d, d->buf_count);
+
+ /* start transmitter if needed and update transmit timeout */
+ if (!info->tx_active)
+ tx_start(info);
+ update_tx_timer(info);
+
+ return true;
}
static int register_test(struct slgt_info *info)
@@ -4934,9 +4960,7 @@ static int loopback_test(struct slgt_info *info)
spin_lock_irqsave(&info->lock,flags);
async_mode(info);
rx_start(info);
- info->tx_count = count;
tx_load(info, buf, count);
- tx_start(info);
spin_unlock_irqrestore(&info->lock, flags);
/* wait for receive complete */
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index ac16fbec72d..283a15bc84e 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -148,7 +148,6 @@ void tty_audit_fork(struct signal_struct *sig)
spin_lock_irq(&current->sighand->siglock);
sig->audit_tty = current->signal->audit_tty;
spin_unlock_irq(&current->sighand->siglock);
- sig->tty_audit_buf = NULL;
}
/**
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 66fa4e10d76..af8d9771572 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -231,9 +231,10 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size)
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
/**
- * tty_insert_flip_string - Add characters to the tty buffer
+ * tty_insert_flip_string_fixed_flag - Add characters to the tty buffer
* @tty: tty structure
* @chars: characters
+ * @flag: flag value for each character
* @size: size
*
* Queue a series of bytes to the tty buffering. All the characters
@@ -242,18 +243,19 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
* Locking: Called functions may take tty->buf.lock
*/
-int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
- size_t size)
+int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
+ const unsigned char *chars, char flag, size_t size)
{
int copied = 0;
do {
- int space = tty_buffer_request_room(tty, size - copied);
+ int goal = min(size - copied, TTY_BUFFER_PAGE);
+ int space = tty_buffer_request_room(tty, goal);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0))
break;
memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
copied += space;
chars += space;
@@ -262,7 +264,7 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
} while (unlikely(size > copied));
return copied;
}
-EXPORT_SYMBOL(tty_insert_flip_string);
+EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
/**
* tty_insert_flip_string_flags - Add characters to the tty buffer
@@ -283,7 +285,8 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
{
int copied = 0;
do {
- int space = tty_buffer_request_room(tty, size - copied);
+ int goal = min(size - copied, TTY_BUFFER_PAGE);
+ int space = tty_buffer_request_room(tty, goal);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0))
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index dcb9083ecde..a42c466f709 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2028,7 +2028,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
* @rows: rows (character)
* @cols: cols (character)
*
- * Update the termios variables and send the neccessary signals to
+ * Update the termios variables and send the necessary signals to
* peform a terminal resize correctly
*/
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 3f653f7d849..500e740ec5e 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -706,12 +706,13 @@ static void tty_reset_termios(struct tty_struct *tty)
/**
* tty_ldisc_reinit - reinitialise the tty ldisc
* @tty: tty to reinit
+ * @ldisc: line discipline to reinitialize
*
- * Switch the tty back to N_TTY line discipline and leave the
- * ldisc state closed
+ * Switch the tty to a line discipline and leave the ldisc
+ * state closed
*/
-static void tty_ldisc_reinit(struct tty_struct *tty)
+static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
{
struct tty_ldisc *ld;
@@ -721,10 +722,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty)
/*
* Switch the line discipline back
*/
- ld = tty_ldisc_get(N_TTY);
+ ld = tty_ldisc_get(ldisc);
BUG_ON(IS_ERR(ld));
tty_ldisc_assign(tty, ld);
- tty_set_termios_ldisc(tty, N_TTY);
+ tty_set_termios_ldisc(tty, ldisc);
}
/**
@@ -745,6 +746,8 @@ static void tty_ldisc_reinit(struct tty_struct *tty)
void tty_ldisc_hangup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
+ int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS;
+ int err = 0;
/*
* FIXME! What are the locking issues here? This may me overdoing
@@ -772,25 +775,32 @@ void tty_ldisc_hangup(struct tty_struct *tty)
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
/*
* Shutdown the current line discipline, and reset it to
- * N_TTY.
+ * N_TTY if need be.
+ *
+ * Avoid racing set_ldisc or tty_ldisc_release
*/
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* Avoid racing set_ldisc or tty_ldisc_release */
- mutex_lock(&tty->ldisc_mutex);
- tty_ldisc_halt(tty);
- if (tty->ldisc) { /* Not yet closed */
- /* Switch back to N_TTY */
- tty_ldisc_reinit(tty);
- /* At this point we have a closed ldisc and we want to
- reopen it. We could defer this to the next open but
- it means auditing a lot of other paths so this is
- a FIXME */
+ mutex_lock(&tty->ldisc_mutex);
+ tty_ldisc_halt(tty);
+ /* At this point we have a closed ldisc and we want to
+ reopen it. We could defer this to the next open but
+ it means auditing a lot of other paths so this is
+ a FIXME */
+ if (tty->ldisc) { /* Not yet closed */
+ if (reset == 0) {
+ tty_ldisc_reinit(tty, tty->termios->c_line);
+ err = tty_ldisc_open(tty, tty->ldisc);
+ }
+ /* If the re-open fails or we reset then go to N_TTY. The
+ N_TTY open cannot fail */
+ if (reset || err) {
+ tty_ldisc_reinit(tty, N_TTY);
WARN_ON(tty_ldisc_open(tty, tty->ldisc));
- tty_ldisc_enable(tty);
}
- mutex_unlock(&tty->ldisc_mutex);
- tty_reset_termios(tty);
+ tty_ldisc_enable(tty);
}
+ mutex_unlock(&tty->ldisc_mutex);
+ if (reset)
+ tty_reset_termios(tty);
}
/**
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 213373b5f17..f404ccfc9c2 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -379,7 +379,7 @@ static ssize_t send_control_msg(struct port *port, unsigned int event,
struct scatterlist sg[1];
struct virtio_console_control cpkt;
struct virtqueue *vq;
- int len;
+ unsigned int len;
if (!use_multiport(port->portdev))
return 0;
@@ -1071,27 +1071,27 @@ static void config_intr(struct virtio_device *vdev)
static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock)
{
struct port_buffer *buf;
- unsigned int ret;
- int err;
+ unsigned int nr_added_bufs;
+ int ret;
- ret = 0;
+ nr_added_bufs = 0;
do {
buf = alloc_buf(PAGE_SIZE);
if (!buf)
break;
spin_lock_irq(lock);
- err = add_inbuf(vq, buf);
- if (err < 0) {
+ ret = add_inbuf(vq, buf);
+ if (ret < 0) {
spin_unlock_irq(lock);
free_buf(buf);
break;
}
- ret++;
+ nr_added_bufs++;
spin_unlock_irq(lock);
- } while (err > 0);
+ } while (ret > 0);
- return ret;
+ return nr_added_bufs;
}
static int add_port(struct ports_device *portdev, u32 id)
@@ -1100,6 +1100,7 @@ static int add_port(struct ports_device *portdev, u32 id)
struct port *port;
struct port_buffer *buf;
dev_t devt;
+ unsigned int nr_added_bufs;
int err;
port = kmalloc(sizeof(*port), GFP_KERNEL);
@@ -1144,8 +1145,8 @@ static int add_port(struct ports_device *portdev, u32 id)
init_waitqueue_head(&port->waitqueue);
/* Fill the in_vq with buffers so the host can send us data. */
- err = fill_queue(port->in_vq, &port->inbuf_lock);
- if (!err) {
+ nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock);
+ if (!nr_added_bufs) {
dev_err(port->dev, "Error allocating inbufs\n");
err = -ENOMEM;
goto free_device;
@@ -1442,12 +1443,14 @@ static int __devinit virtcons_probe(struct virtio_device *vdev)
INIT_LIST_HEAD(&portdev->ports);
if (multiport) {
+ unsigned int nr_added_bufs;
+
spin_lock_init(&portdev->cvq_lock);
INIT_WORK(&portdev->control_work, &control_work_handler);
INIT_WORK(&portdev->config_work, &config_work_handler);
- err = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
- if (!err) {
+ nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ if (!nr_added_bufs) {
dev_err(&vdev->dev,
"Error allocating buffers for control queue\n");
err = -ENOMEM;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 50faa1fb0f0..bd1d1164fec 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
*
* Resize a virtual console, clipping according to the actual constraints.
* If the caller passes a tty structure then update the termios winsize
- * information and perform any neccessary signal handling.
+ * information and perform any necessary signal handling.
*
* Caller must hold the console semaphore. Takes the termios mutex and
* ctrl_lock of the tty IFF a tty is passed.
@@ -2119,8 +2119,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
uint8_t inverse;
uint8_t width;
u16 himask, charmask;
- const unsigned char *orig_buf = NULL;
- int orig_count;
if (in_interrupt())
return count;
@@ -2142,8 +2140,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
release_console_sem();
return 0;
}
- orig_buf = buf;
- orig_count = count;
himask = vc->vc_hi_font_mask;
charmask = himask ? 0x1ff : 0xff;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 6aa10284104..87778dcf872 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -888,7 +888,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
ret = -EFAULT;
goto out;
}
- if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) {
+ if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS && tmp.mode != VT_PROCESS_AUTO) {
ret = -EINVAL;
goto out;
}
@@ -1622,7 +1622,7 @@ static void complete_change_console(struct vc_data *vc)
* telling it that it has acquired. Also check if it has died and
* clean up (similar to logic employed in change_console())
*/
- if (vc->vt_mode.mode == VT_PROCESS) {
+ if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
@@ -1682,7 +1682,7 @@ void change_console(struct vc_data *new_vc)
* vt to auto control.
*/
vc = vc_cons[fg_console].d;
- if (vc->vt_mode.mode == VT_PROCESS) {
+ if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
@@ -1693,27 +1693,28 @@ void change_console(struct vc_data *new_vc)
*/
vc->vt_newvt = new_vc->vc_num;
if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
+ if(vc->vt_mode.mode == VT_PROCESS)
+ /*
+ * It worked. Mark the vt to switch to and
+ * return. The process needs to send us a
+ * VT_RELDISP ioctl to complete the switch.
+ */
+ return;
+ } else {
/*
- * It worked. Mark the vt to switch to and
- * return. The process needs to send us a
- * VT_RELDISP ioctl to complete the switch.
+ * The controlling process has died, so we revert back to
+ * normal operation. In this case, we'll also change back
+ * to KD_TEXT mode. I'm not sure if this is strictly correct
+ * but it saves the agony when the X server dies and the screen
+ * remains blanked due to KD_GRAPHICS! It would be nice to do
+ * this outside of VT_PROCESS but there is no single process
+ * to account for and tracking tty count may be undesirable.
*/
- return;
+ reset_vc(vc);
}
/*
- * The controlling process has died, so we revert back to
- * normal operation. In this case, we'll also change back
- * to KD_TEXT mode. I'm not sure if this is strictly correct
- * but it saves the agony when the X server dies and the screen
- * remains blanked due to KD_GRAPHICS! It would be nice to do
- * this outside of VT_PROCESS but there is no single process
- * to account for and tracking tty count may be undesirable.
- */
- reset_vc(vc);
-
- /*
- * Fall through to normal (VT_AUTO) handling of the switch...
+ * Fall through to normal (VT_AUTO and VT_PROCESS_AUTO) handling of the switch...
*/
}