diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/amiserial.c | 62 | ||||
| -rw-r--r-- | drivers/char/cyclades.c | 54 | ||||
| -rw-r--r-- | drivers/char/ip2/ip2main.c | 74 | ||||
| -rw-r--r-- | drivers/char/istallion.c | 121 | ||||
| -rw-r--r-- | drivers/char/pcmcia/synclink_cs.c | 73 | ||||
| -rw-r--r-- | drivers/char/stallion.c | 126 | ||||
| -rw-r--r-- | drivers/char/synclink.c | 98 | ||||
| -rw-r--r-- | drivers/char/synclink_gt.c | 74 | ||||
| -rw-r--r-- | drivers/char/synclinkmp.c | 74 | ||||
| -rw-r--r-- | drivers/char/sysrq.c | 19 | ||||
| -rw-r--r-- | drivers/char/tty_io.c | 20 |
11 files changed, 353 insertions, 442 deletions
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index a58869ea851..fd3ebd1be57 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -79,6 +79,7 @@ static char *serial_version = "4.30"; #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/bitops.h> @@ -1825,14 +1826,13 @@ static int rs_open(struct tty_struct *tty, struct file * filp) * /proc fs routines.... */ -static inline int line_info(char *buf, struct serial_state *state) +static inline void line_info(struct seq_file *m, struct serial_state *state) { struct async_struct *info = state->info, scr_info; char stat_buf[30], control, status; - int ret; unsigned long flags; - ret = sprintf(buf, "%d: uart:amiga_builtin",state->line); + seq_printf(m, "%d: uart:amiga_builtin",state->line); /* * Figure out the current RS-232 lines @@ -1864,55 +1864,49 @@ static inline int line_info(char *buf, struct serial_state *state) strcat(stat_buf, "|CD"); if (info->quot) { - ret += sprintf(buf+ret, " baud:%d", - state->baud_base / info->quot); + seq_printf(m, " baud:%d", state->baud_base / info->quot); } - ret += sprintf(buf+ret, " tx:%d rx:%d", - state->icount.tx, state->icount.rx); + seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx); if (state->icount.frame) - ret += sprintf(buf+ret, " fe:%d", state->icount.frame); + seq_printf(m, " fe:%d", state->icount.frame); if (state->icount.parity) - ret += sprintf(buf+ret, " pe:%d", state->icount.parity); + seq_printf(m, " pe:%d", state->icount.parity); if (state->icount.brk) - ret += sprintf(buf+ret, " brk:%d", state->icount.brk); + seq_printf(m, " brk:%d", state->icount.brk); if (state->icount.overrun) - ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); + seq_printf(m, " oe:%d", state->icount.overrun); /* * Last thing is the RS-232 status lines */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); - return ret; + seq_printf(m, " %s\n", stat_buf+1); } -static int rs_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) +static int rs_proc_show(struct seq_file *m, void *v) { - int len = 0, l; - off_t begin = 0; - - len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); - l = line_info(page + len, &rs_table[0]); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + line_info(m, &rs_table[0]); + return 0; } +static int rs_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, rs_proc_show, NULL); +} + +static const struct file_operations rs_proc_fops = { + .owner = THIS_MODULE, + .open = rs_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* * --------------------------------------------------------------------- * rs_init() and friends @@ -1951,9 +1945,9 @@ static const struct tty_operations serial_ops = { .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, .tiocmget = rs_tiocmget, .tiocmset = rs_tiocmset, + .proc_fops = &rs_proc_fops, }; /* diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 6a59f72a9c2..272db0e2b49 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -657,6 +657,7 @@ #include <linux/stat.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> static void cy_throttle(struct tty_struct *tty); static void cy_send_xchar(struct tty_struct *tty, char ch); @@ -868,8 +869,6 @@ static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); static unsigned detect_isa_irq(void __iomem *); #endif /* CONFIG_ISA */ -static int cyclades_get_proc_info(char *, char **, off_t, int, int *, void *); - #ifndef CONFIG_CYZ_INTR static void cyz_poll(unsigned long); @@ -5216,31 +5215,22 @@ static struct pci_driver cy_pci_driver = { }; #endif -static int -cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, - int *eof, void *data) +static int cyclades_proc_show(struct seq_file *m, void *v) { struct cyclades_port *info; unsigned int i, j; - int len = 0; - off_t begin = 0; - off_t pos = 0; - int size; __u32 cur_jifs = jiffies; - size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn " + seq_puts(m, "Dev TimeOpen BytesOut IdleOut BytesIn " "IdleIn Overruns Ldisc\n"); - pos += size; - len += size; - /* Output one line for each known port */ for (i = 0; i < NR_CARDS; i++) for (j = 0; j < cy_card[i].nports; j++) { info = &cy_card[i].ports[j]; if (info->port.count) - size = sprintf(buf + len, "%3d %8lu %10lu %8lu " + seq_printf(m, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", info->line, (cur_jifs - info->idle_stats.in_use) / HZ, info->idle_stats.xmit_bytes, @@ -5251,30 +5241,26 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, /* FIXME: double check locking */ (long)info->port.tty->ldisc.ops->num); else - size = sprintf(buf + len, "%3d %8lu %10lu %8lu " + seq_printf(m, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); - len += size; - pos = begin + len; - - if (pos < offset) { - len = 0; - begin = pos; - } - if (pos > offset + length) - goto done; } - *eof = 1; -done: - *start = buf + (offset - begin); /* Start of wanted data */ - len -= (offset - begin); /* Start slop */ - if (len > length) - len = length; /* Ending slop */ - if (len < 0) - len = 0; - return len; + return 0; +} + +static int cyclades_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, cyclades_proc_show, NULL); } +static const struct file_operations cyclades_proc_fops = { + .owner = THIS_MODULE, + .open = cyclades_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /* The serial driver boot-time initialization code! Hardware I/O ports are mapped to character special devices on a first found, first allocated manner. That is, this code searches @@ -5311,9 +5297,9 @@ static const struct tty_operations cy_ops = { .hangup = cy_hangup, .break_ctl = cy_break, .wait_until_sent = cy_wait_until_sent, - .read_proc = cyclades_get_proc_info, .tiocmget = cy_tiocmget, .tiocmset = cy_tiocmset, + .proc_fops = &cyclades_proc_fops, }; static int __init cy_init(void) diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 70e0ebc30bd..afd9247cf08 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -139,7 +139,7 @@ #include <linux/seq_file.h> static const struct file_operations ip2mem_proc_fops; -static int ip2_read_proc(char *, char **, off_t, int, int *, void * ); +static const struct file_operations ip2_proc_fops; /********************/ /* Type Definitions */ @@ -446,9 +446,9 @@ static const struct tty_operations ip2_ops = { .stop = ip2_stop, .start = ip2_start, .hangup = ip2_hangup, - .read_proc = ip2_read_proc, .tiocmget = ip2_tiocmget, .tiocmset = ip2_tiocmset, + .proc_fops = &ip2_proc_fops, }; /******************************************************************************/ @@ -3029,19 +3029,17 @@ static const struct file_operations ip2mem_proc_fops = { * different sources including ip2mkdev.c and a couple of other drivers. * The bugs are all mine. :-) =mhw= */ -static int ip2_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int ip2_proc_show(struct seq_file *m, void *v) { int i, j, box; - int len = 0; int boxes = 0; int ports = 0; int tports = 0; - off_t begin = 0; i2eBordStrPtr pB; + char *sep; - len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion ); - len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", + seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion); + seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); @@ -3053,7 +3051,8 @@ static int ip2_read_proc(char *page, char **start, off_t off, switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { case POR_ID_FIIEX: - len += sprintf( page+len, "Board %d: EX ports=", i ); + seq_printf(m, "Board %d: EX ports=", i); + sep = ""; for( box = 0; box < ABS_MAX_BOXES; ++box ) { ports = 0; @@ -3065,79 +3064,74 @@ static int ip2_read_proc(char *page, char **start, off_t off, ++ports; } } - len += sprintf( page+len, "%d,", ports ); + seq_printf(m, "%s%d", sep, ports); + sep = ","; tports += ports; } - - --len; /* Backup over that last comma */ - - len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 ); + seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8); break; case POR_ID_II_4: - len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i ); + seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i); tports = ports = 4; break; case POR_ID_II_8: - len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i ); + seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i); tports = ports = 8; break; case POR_ID_II_8R: - len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i ); + seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i); tports = ports = 8; break; default: - len += sprintf(page+len, "Board %d: unknown", i ); + seq_printf(m, "Board %d: unknown", i); /* Don't try and probe for minor numbers */ tports = ports = 0; } } else { /* Don't try and probe for minor numbers */ - len += sprintf(page+len, "Board %d: vacant", i ); + seq_printf(m, "Board %d: vacant", i); tports = ports = 0; } if( tports ) { - len += sprintf(page+len, " minors=" ); - + seq_puts(m, " minors="); + sep = ""; for ( box = 0; box < ABS_MAX_BOXES; ++box ) { for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) { if ( pB->i2eChannelMap[box] & (1 << j) ) { - len += sprintf (page+len,"%d,", + seq_printf(m, "%s%d", sep, j + ABS_BIGGEST_BOX * (box+i*ABS_MAX_BOXES)); + sep = ","; } } } - - page[ len - 1 ] = '\n'; /* Overwrite that last comma */ - } else { - len += sprintf (page+len,"\n" ); - } - - if (len+begin > off+count) - break; - if (len+begin < off) { - begin += len; - len = 0; } + seq_putc(m, '\n'); } + return 0; + } - if (i >= IP2_MAX_BOARDS) - *eof = 1; - if (off >= len+begin) - return 0; +static int ip2_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ip2_proc_show, NULL); +} - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); - } +static const struct file_operations ip2_proc_fops = { + .owner = THIS_MODULE, + .open = ip2_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; /******************************************************************************/ /* Function: ip2trace() */ diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 5c3dc6b8411..fff19f7e29d 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -24,6 +24,7 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> +#include <linux/seq_file.h> #include <linux/cdk.h> #include <linux/comstats.h> #include <linux/istallion.h> @@ -613,7 +614,6 @@ static int stli_breakctl(struct tty_struct *tty, int state); static void stli_waituntilsent(struct tty_struct *tty, int timeout); static void stli_sendxchar(struct tty_struct *tty, char ch); static void stli_hangup(struct tty_struct *tty); -static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos); static int stli_brdinit(struct stlibrd *brdp); static int stli_startbrd(struct stlibrd *brdp); @@ -1893,20 +1893,10 @@ static void stli_sendxchar(struct tty_struct *tty, char ch) stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0); } -/*****************************************************************************/ - -#define MAXLINE 80 - -/* - * Format info for a specified port. The line is deliberately limited - * to 80 characters. (If it is too long it will be truncated, if too - * short then padded with spaces). - */ - -static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos) +static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr) { - char *sp, *uart; - int rc, cnt; + char *uart; + int rc; rc = stli_portcmdstats(NULL, portp); @@ -1918,44 +1908,50 @@ static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portn default:uart = "CD1400"; break; } } - - sp = pos; - sp += sprintf(sp, "%d: uart:%s ", portnr, uart); + seq_printf(m, "%d: uart:%s ", portnr, uart); if ((brdp->state & BST_STARTED) && (rc >= 0)) { - sp += sprintf(sp, "tx:%d rx:%d", (int) stli_comstats.txtotal, + char sep; + + seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal, (int) stli_comstats.rxtotal); if (stli_comstats.rxframing) - sp += sprintf(sp, " fe:%d", + seq_printf(m, " fe:%d", (int) stli_comstats.rxframing); if (stli_comstats.rxparity) - sp += sprintf(sp, " pe:%d", + seq_printf(m, " pe:%d", (int) stli_comstats.rxparity); if (stli_comstats.rxbreaks) - sp += sprintf(sp, " brk:%d", + seq_printf(m, " brk:%d", (int) stli_comstats.rxbreaks); if (stli_comstats.rxoverrun) - sp += sprintf(sp, " oe:%d", + seq_printf(m, " oe:%d", (int) stli_comstats.rxoverrun); - cnt = sprintf(sp, "%s%s%s%s%s ", - (stli_comstats.signals & TIOCM_RTS) ? "|RTS" : "", - (stli_comstats.signals & TIOCM_CTS) ? "|CTS" : "", - (stli_comstats.signals & TIOCM_DTR) ? "|DTR" : "", - (stli_comstats.signals & TIOCM_CD) ? "|DCD" : "", - (stli_comstats.signals & TIOCM_DSR) ? "|DSR" : ""); - *sp = ' '; - sp += cnt; + sep = ' '; + if (stli_comstats.signals & TIOCM_RTS) { + seq_printf(m, "%c%s", sep, "RTS"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_CTS) { + seq_printf(m, "%c%s", sep, "CTS"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_DTR) { + seq_printf(m, "%c%s", sep, "DTR"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_CD) { + seq_printf(m, "%c%s", sep, "DCD"); + sep = '|'; + } + if (stli_comstats.signals & TIOCM_DSR) { + seq_printf(m, "%c%s", sep, "DSR"); + sep = '|'; + } } - - for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++) - *sp++ = ' '; - if (cnt >= MAXLINE) - pos[(MAXLINE - 2)] = '+'; - pos[(MAXLINE - 1)] = '\n'; - - return(MAXLINE); + seq_putc(m, '\n'); } /*****************************************************************************/ @@ -1964,26 +1960,15 @@ static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portn * Port info, read from the /proc file system. */ -static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) +static int stli_proc_show(struct seq_file *m, void *v) { struct stlibrd *brdp; struct stliport *portp; unsigned int brdnr, portnr, totalport; - int curoff, maxoff; - char *pos; - pos = page; totalport = 0; - curoff = 0; - - if (off == 0) { - pos += sprintf(pos, "%s: version %s", stli_drvtitle, - stli_drvversion); - while (pos < (page + MAXLINE - 1)) - *pos++ = ' '; - *pos++ = '\n'; - } - curoff = MAXLINE; + + seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion); /* * We scan through for each board, panel and port. The offset is @@ -1996,33 +1981,31 @@ static int stli_readproc(char *page, char **start, off_t off, int count, int *eo if (brdp->state == 0) continue; - maxoff = curoff + (brdp->nrports * MAXLINE); - if (off >= maxoff) { - curoff = maxoff; - continue; - } - totalport = brdnr * STL_MAXPORTS; for (portnr = 0; (portnr < brdp->nrports); portnr++, totalport++) { portp = brdp->ports[portnr]; if (portp == NULL) continue; - if (off >= (curoff += MAXLINE)) - continue; - if ((pos - page + MAXLINE) > count) - goto stli_readdone; - pos += stli_portinfo(brdp, portp, totalport, pos); + stli_portinfo(m, brdp, portp, totalport); } } + return 0; +} - *eof = 1; - -stli_readdone: - *start = page; - return(pos - page); +static int stli_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, stli_proc_show, NULL); } +static const struct file_operations stli_proc_fops = { + .owner = THIS_MODULE, + .open = stli_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /*****************************************************************************/ /* @@ -4427,9 +4410,9 @@ static const struct tty_operations stli_ops = { .break_ctl = stli_breakctl, .wait_until_sent = stli_waituntilsent, .send_xchar = stli_sendxchar, - .read_proc = stli_readproc, .tiocmget = stli_tiocmget, .tiocmset = stli_tiocmset, + .proc_fops = &stli_proc_fops, }; static const struct tty_port_operations stli_port_ops = { diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 5608a1e5a3b..19d79fc5446 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -51,6 +51,7 @@ #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/netdevice.h> #include <linux/vmalloc.h> @@ -2619,13 +2620,12 @@ cleanup: * /proc fs routines.... */ -static inline int line_info(char *buf, MGSLPC_INFO *info) +static inline void line_info(struct seq_file *m, MGSLPC_INFO *info) { char stat_buf[30]; - int ret; unsigned long flags; - ret = sprintf(buf, "%s:io:%04X irq:%d", + seq_printf(m, "%s:io:%04X irq:%d", info->device_name, info->io_base, info->irq_level); /* output current serial signal states */ @@ -2649,75 +2649,70 @@ static inline int line_info(char *buf, MGSLPC_INFO *info) strcat(stat_buf, "|RI"); if (info->params.mode == MGSL_MODE_HDLC) { - ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d", + seq_printf(m, " HDLC txok:%d rxok:%d", info->icount.txok, info->icount.rxok); if (info->icount.txunder) - ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); + seq_printf(m, " txunder:%d", info->icount.txunder); if (info->icount.txabort) - ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); + seq_printf(m, " txabort:%d", info->icount.txabort); if (info->icount.rxshort) - ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); + seq_printf(m, " rxshort:%d", info->icount.rxshort); if (info->icount.rxlong) - ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); + seq_printf(m, " rxlong:%d", info->icount.rxlong); if (info->icount.rxover) - ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); + seq_printf(m, " rxover:%d", info->icount.rxover); if (info->icount.rxcrc) - ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc); + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); } else { - ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d", + seq_printf(m, " ASYNC tx:%d rx:%d", info->icount.tx, info->icount.rx); if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%d", info->icount.frame); + seq_printf(m, " fe:%d", info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%d", info->icount.parity); + seq_printf(m, " pe:%d", info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%d", info->icount.brk); + seq_printf(m, " brk:%d", info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); + seq_printf(m, " oe:%d", info->icount.overrun); } /* Append serial signal status to end */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); + seq_printf(m, " %s\n", stat_buf+1); - ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", info->tx_active,info->bh_requested,info->bh_running, info->pending_bh); - - return ret; } /* Called to print information about devices */ -static int mgslpc_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) +static int mgslpc_proc_show(struct seq_file *m, void *v) { - int len = 0, l; - off_t begin = 0; MGSLPC_INFO *info; - len += sprintf(page, "synclink driver:%s\n", driver_version); + seq_printf(m, "synclink driver:%s\n", driver_version); info = mgslpc_device_list; while( info ) { - l = line_info(page + len, info); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + line_info(m, info); info = info->next_device; } + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int mgslpc_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mgslpc_proc_show, NULL); } +static const struct file_operations mgslpc_proc_fops = { + .owner = THIS_MODULE, + .open = mgslpc_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int rx_alloc_buffers(MGSLPC_INFO *info) { /* each buffer has header and data */ @@ -2861,13 +2856,13 @@ static const struct tty_operations mgslpc_ops = { .send_xchar = mgslpc_send_xchar, .break_ctl = mgslpc_break, .wait_until_sent = mgslpc_wait_until_sent, - .read_proc = mgslpc_read_proc, .set_termios = mgslpc_set_termios, .stop = tx_pause, .start = tx_release, .hangup = mgslpc_hangup, .tiocmget = tiocmget, .tiocmset = tiocmset, + .proc_fops = &mgslpc_proc_fops, }; static void synclink_cs_cleanup(void) diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index e1e0dd89ac9..2ad813a801d 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -32,6 +32,7 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> +#include <linux/seq_file.h> #include <linux/cd1400.h> #include <linux/sc26198.h> #include <linux/comstats.h> @@ -1379,52 +1380,47 @@ static void stl_sendxchar(struct tty_struct *tty, char ch) stl_putchar(tty, ch); } -/*****************************************************************************/ - -#define MAXLINE 80 - -/* - * Format info for a specified port. The line is deliberately limited - * to 80 characters. (If it is too long it will be truncated, if too - * short then padded with spaces). - */ - -static int stl_portinfo(struct stlport *portp, int portnr, char *pos) +static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr) { - char *sp; - int sigs, cnt; + int sigs; + char sep; - sp = pos; - sp += sprintf(sp, "%d: uart:%s tx:%d rx:%d", + seq_printf(m, "%d: uart:%s tx:%d rx:%d", portnr, (portp->hwid == 1) ? "SC26198" : "CD1400", (int) portp->stats.txtotal, (int) portp->stats.rxtotal); if (portp->stats.rxframing) - sp += sprintf(sp, " fe:%d", (int) portp->stats.rxframing); + seq_printf(m, " fe:%d", (int) portp->stats.rxframing); if (portp->stats.rxparity) - sp += sprintf(sp, " pe:%d", (int) portp->stats.rxparity); + seq_printf(m, " pe:%d", (int) portp->stats.rxparity); if (portp->stats.rxbreaks) - sp += sprintf(sp, " brk:%d", (int) portp->stats.rxbreaks); + seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks); if (portp->stats.rxoverrun) - sp += sprintf(sp, " oe:%d", (int) portp->stats.rxoverrun); + seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun); sigs = stl_getsignals(portp); - cnt = sprintf(sp, "%s%s%s%s%s ", - (sigs & TIOCM_RTS) ? "|RTS" : "", - (sigs & TIOCM_CTS) ? "|CTS" : "", - (sigs & TIOCM_DTR) ? "|DTR" : "", - (sigs & TIOCM_CD) ? "|DCD" : "", - (sigs & TIOCM_DSR) ? "|DSR" : ""); - *sp = ' '; - sp += cnt; - - for (cnt = sp - pos; cnt < (MAXLINE - 1); cnt++) - *sp++ = ' '; - if (cnt >= MAXLINE) - pos[(MAXLINE - 2)] = '+'; - pos[(MAXLINE - 1)] = '\n'; - - return MAXLINE; + sep = ' '; + if (sigs & TIOCM_RTS) { + seq_printf(m, "%c%s", sep, "RTS"); + sep = '|'; + } + if (sigs & TIOCM_CTS) { + seq_printf(m, "%c%s", sep, "CTS"); + sep = '|'; + } + if (sigs & TIOCM_DTR) { + seq_printf(m, "%c%s", sep, "DTR"); + sep = '|'; + } + if (sigs & TIOCM_CD) { + seq_printf(m, "%c%s", sep, "DCD"); + sep = '|'; + } + if (sigs & TIOCM_DSR) { + seq_printf(m, "%c%s", sep, "DSR"); + sep = '|'; + } + seq_putc(m, '\n'); } /*****************************************************************************/ @@ -1433,30 +1429,17 @@ static int stl_portinfo(struct stlport *portp, int portnr, char *pos) * Port info, read from the /proc file system. */ -static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) +static int stl_proc_show(struct seq_file *m, void *v) { struct stlbrd *brdp; struct stlpanel *panelp; struct stlport *portp; unsigned int brdnr, panelnr, portnr; - int totalport, curoff, maxoff; - char *pos; + int totalport; - pr_debug("stl_readproc(page=%p,start=%p,off=%lx,count=%d,eof=%p," - "data=%p\n", page, start, off, count, eof, data); - - pos = page; totalport = 0; - curoff = 0; - - if (off == 0) { - pos += sprintf(pos, "%s: version %s", stl_drvtitle, - stl_drvversion); - while (pos < (page + MAXLINE - 1)) - *pos++ = ' '; - *pos++ = '\n'; - } - curoff = MAXLINE; + + seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion); /* * We scan through for each board, panel and port. The offset is @@ -1469,46 +1452,37 @@ static int stl_readproc(char *page, char **start, off_t off, int count, int *eof if (brdp->state == 0) continue; - maxoff = curoff + (brdp->nrports * MAXLINE); - if (off >= maxoff) { - curoff = maxoff; - continue; - } - totalport = brdnr * STL_MAXPORTS; for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) { panelp = brdp->panels[panelnr]; if (panelp == NULL) continue; - maxoff = curoff + (panelp->nrports * MAXLINE); - if (off >= maxoff) { - curoff = maxoff; - totalport += panelp->nrports; - continue; - } - for (portnr = 0; portnr < panelp->nrports; portnr++, totalport++) { portp = panelp->ports[portnr]; if (portp == NULL) continue; - if (off >= (curoff += MAXLINE)) - continue; - if ((pos - page + MAXLINE) > count) - goto stl_readdone; - pos += stl_portinfo(portp, totalport, pos); + stl_portinfo(m, portp, totalport); } } } + return 0; +} - *eof = 1; - -stl_readdone: - *start = page; - return pos - page; +static int stl_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, stl_proc_show, NULL); } +static const struct file_operations stl_proc_fops = { + .owner = THIS_MODULE, + .open = stl_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /*****************************************************************************/ /* @@ -2566,9 +2540,9 @@ static const struct tty_operations stl_ops = { .break_ctl = stl_breakctl, .wait_until_sent = stl_waituntilsent, .send_xchar = stl_sendxchar, - .read_proc = stl_readproc, .tiocmget = stl_tiocmget, .tiocmset = stl_tiocmset, + .proc_fops = &stl_proc_fops, }; static const struct tty_port_operations stl_port_ops = { diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 0057a8f58cb..afd0b26ca05 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -79,6 +79,7 @@ #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/mm.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/netdevice.h> @@ -3459,18 +3460,17 @@ cleanup: * /proc fs routines.... */ -static inline int line_info(char *buf, struct mgsl_struct *info) +static inline void line_info(struct seq_file *m, struct mgsl_struct *info) { char stat_buf[30]; - int ret; unsigned long flags; if (info->bus_type == MGSL_BUS_TYPE_PCI) { - ret = sprintf(buf, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", + seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", info->device_name, info->io_base, info->irq_level, info->phys_memory_base, info->phys_lcr_base); } else { - ret = sprintf(buf, "%s:(E)ISA io:%04X irq:%d dma:%d", + seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d", info->device_name, info->io_base, info->irq_level, info->dma_level); } @@ -3497,37 +3497,37 @@ static inline int line_info(char *buf, struct mgsl_struct *info) if (info->params.mode == MGSL_MODE_HDLC || info->params.mode == MGSL_MODE_RAW ) { - ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d", + seq_printf(m, " HDLC txok:%d rxok:%d", info->icount.txok, info->icount.rxok); if (info->icount.txunder) - ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); + seq_printf(m, " txunder:%d", info->icount.txunder); if (info->icount.txabort) - ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); + seq_printf(m, " txabort:%d", info->icount.txabort); if (info->icount.rxshort) - ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); + seq_printf(m, " rxshort:%d", info->icount.rxshort); if (info->icount.rxlong) - ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); + seq_printf(m, " rxlong:%d", info->icount.rxlong); if (info->icount.rxover) - ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); + seq_printf(m, " rxover:%d", info->icount.rxover); if (info->icount.rxcrc) - ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc); + seq_printf(m, " rxcrc:%d", info->icount.rxcrc); } else { - ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d", + seq_printf(m, " ASYNC tx:%d rx:%d", info->icount.tx, info->icount.rx); if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%d", info->icount |