diff options
Diffstat (limited to 'drivers/char/xilinx_hwicap/buffer_icap.c')
-rw-r--r-- | drivers/char/xilinx_hwicap/buffer_icap.c | 80 |
1 files changed, 40 insertions, 40 deletions
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index dfea2bde162..f577daedb63 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -73,8 +73,8 @@ #define XHI_BUFFER_START 0 /** - * buffer_icap_get_status: Get the contents of the status register. - * @parameter base_address: is the base address of the device + * buffer_icap_get_status - Get the contents of the status register. + * @base_address: is the base address of the device * * The status register contains the ICAP status and the done bit. * @@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address) } /** - * buffer_icap_get_bram: Reads data from the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset from which the data should be read. + * buffer_icap_get_bram - Reads data from the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset from which the data should be read. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address, } /** - * buffer_icap_busy: Return true if the icap device is busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address) } /** - * buffer_icap_busy: Return true if the icap device is not busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is not busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address) } /** - * buffer_icap_set_size: Set the size register. - * @parameter base_address: is the base address of the device - * @parameter data: The size in bytes. + * buffer_icap_set_size - Set the size register. + * @base_address: is the base address of the device + * @data: The size in bytes. * * The size register holds the number of 8 bit bytes to transfer between * bram and the icap (or icap to bram). @@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address, } /** - * buffer_icap_mSetoffsetReg: Set the bram offset register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_offset - Set the bram offset register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The bram offset register holds the starting bram address to transfer * data from during configuration or write data to during readback. @@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address, } /** - * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The RNC register determines the direction of the data transfer. It * controls whether a configuration or readback take place. Writing to @@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address, } /** - * buffer_icap_set_bram: Write data to the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset at which the data should be written. - * @parameter data: The value to be written to the bram offset. + * buffer_icap_set_bram - Write data to the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset at which the data should be written. + * @data: The value to be written to the bram offset. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address, } /** - * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, @@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, @@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * Writing to the status register resets the ICAP logic in an internal * version of the core. For the version of the core published in EDK, @@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata) } /** - * buffer_icap_set_configuration: Load a partial bitstream from system memory. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Kernel address of the partial bitstream. - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_set_configuration - Load a partial bitstream from system memory. + * @drvdata: a pointer to the drvdata. + * @data: Kernel address of the partial bitstream. + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) @@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, }; /** - * buffer_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) |