1 files changed, 307 insertions, 0 deletions
diff --git a/drivers/char/watchdog/iTCO_vendor_support.c b/drivers/char/watchdog/iTCO_vendor_support.c
new file mode 100644
index 00000000000..41508399009
--- /dev/null
+++ b/drivers/char/watchdog/iTCO_vendor_support.c
@@ -0,0 +1,307 @@
+/*
+ *	intel TCO vendor specific watchdog driver support
+ *
+ *	(c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ *	provide warranty for any of this software. This material is
+ *	provided "AS-IS" and at no charge.
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+/* Module and version information */
+#define DRV_NAME        "iTCO_vendor_support"
+#define DRV_VERSION     "1.01"
+#define DRV_RELDATE     "11-Nov-2006"
+#define PFX		DRV_NAME ": "
+
+/* Includes */
+#include <linux/module.h>		/* For module specific items */
+#include <linux/moduleparam.h>		/* For new moduleparam's */
+#include <linux/types.h>		/* For standard types (like size_t) */
+#include <linux/errno.h>		/* For the -ENODEV/... values */
+#include <linux/kernel.h>		/* For printk/panic/... */
+#include <linux/init.h>			/* For __init/__exit/... */
+#include <linux/ioport.h>		/* For io-port access */
+
+#include <asm/io.h>			/* For inb/outb/... */
+
+/* iTCO defines */
+#define	SMI_EN		acpibase + 0x30	/* SMI Control and Enable Register */
+#define	TCOBASE		acpibase + 0x60	/* TCO base address		*/
+#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+
+/* List of vendor support modes */
+#define SUPERMICRO_OLD_BOARD	1	/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
+#define SUPERMICRO_NEW_BOARD	2	/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+
+static int vendorsupport = 0;
+module_param(vendorsupport, int, 0);
+MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
+
+/*
+ *	Vendor Specific Support
+ */
+
+/*
+ *	Vendor Support: 1
+ *	Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
+ *	iTCO chipset: ICH2
+ *
+ *	Code contributed by: R. Seretny <lkpatches@paypc.com>
+ *	Documentation obtained by R. Seretny from SuperMicro Technical Support
+ *
+ *	To enable Watchdog function:
+ *	    BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
+ *	    This setting enables SMI to clear the watchdog expired flag.
+ *	    If BIOS or CPU fail which may cause SMI hang, then system will
+ *	    reboot. When application starts to use watchdog function,
+ *	    application has to take over the control from SMI.
+ *
+ *	    For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
+ *	    function.
+ *
+ *	    Note: The system will reboot when Expire Flag is set TWICE.
+ *	    So, if the watchdog timer is 20 seconds, then the maximum hang
+ *	    time is about 40 seconds, and the minimum hang time is about
+ *	    20.6 seconds.
+ */
+
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	val32 = inl(SMI_EN);
+	val32 &= 0x00002000;	/* Turn on SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to deactivate watchdog */
+}
+
+static void supermicro_old_pre_keepalive(unsigned long acpibase)
+{
+	/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
+	/* Clear "Expire Flag" (Bit 3 of TC01_STS register) */
+	outb(0x08, TCO1_STS);
+}
+
+/*
+ *	Vendor Support: 2
+ *	Board: Super Micro Computer Inc. P4SBx, P4DPx
+ *	iTCO chipset: ICH4
+ *
+ *	Code contributed by: R. Seretny <lkpatches@paypc.com>
+ *	Documentation obtained by R. Seretny from SuperMicro Technical Support
+ *
+ *	To enable Watchdog function:
+ *	 1. BIOS
+ *	  For P4SBx:
+ *	  BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
+ *	  For P4DPx:
+ *	  BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
+ *	 This setting enables or disables Watchdog function. When enabled, the
+ *	 default watchdog timer is set to be 5 minutes (about 4’35”). It is
+ *	 enough to load and run the OS. The application (service or driver) has
+ *	 to take over the control once OS is running up and before watchdog
+ *	 expires.
+ *
+ *	 2. JUMPER
+ *	  For P4SBx: JP39
+ *	  For P4DPx: JP37
+ *	  This jumper is used for safety.  Closed is enabled. This jumper
+ *	  prevents user enables watchdog in BIOS by accident.
+ *
+ *	 To enable Watch Dog function, both BIOS and JUMPER must be enabled.
+ *
+ *	The documentation lists motherboards P4SBx and P4DPx series as of
+ *	20-March-2002. However, this code works flawlessly with much newer
+ *	motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
+ *
+ *	The original iTCO driver as written does not actually reset the
+ *	watchdog timer on these machines, as a result they reboot after five
+ *	minutes.
+ *
+ *	NOTE: You may leave the Watchdog function disabled in the SuperMicro
+ *	BIOS to avoid a "boot-race"... This driver will enable watchdog
+ *	functionality even if it's disabled in the BIOS once the /dev/watchdog
+ *	file is opened.
+ */
+
+/* I/O Port's */
+#define SM_REGINDEX	0x2e		/* SuperMicro ICH4+ Register Index */
+#define SM_DATAIO	0x2f		/* SuperMicro ICH4+ Register Data I/O */
+
+/* Control Register's */
+#define SM_CTLPAGESW	0x07		/* SuperMicro ICH4+ Control Page Switch */
+#define SM_CTLPAGE		0x08	/* SuperMicro ICH4+ Control Page Num */
+
+#define SM_WATCHENABLE	0x30		/* Watchdog enable: Bit 0: 0=off, 1=on */
+
+#define SM_WATCHPAGE	0x87		/* Watchdog unlock control page */
+
+#define SM_ENDWATCH	0xAA		/* Watchdog lock control page */
+
+#define SM_COUNTMODE	0xf5		/* Watchdog count mode select */
+					/* (Bit 3: 0 = seconds, 1 = minutes */
+
+#define SM_WATCHTIMER	0xf6		/* 8-bits, Watchdog timer counter (RW) */
+
+#define SM_RESETCONTROL	0xf7		/* Watchdog reset control */
+					/* Bit 6: timer is reset by kbd interrupt */
+					/* Bit 7: timer is reset by mouse interrupt */
+
+static void supermicro_new_unlock_watchdog(void)
+{
+	outb(SM_WATCHPAGE, SM_REGINDEX);	/* Write 0x87 to port 0x2e twice */
+	outb(SM_WATCHPAGE, SM_REGINDEX);
+
+	outb(SM_CTLPAGESW, SM_REGINDEX);	/* Switch to watchdog control page */
+	outb(SM_CTLPAGE, SM_DATAIO);
+}
+
+static void supermicro_new_lock_watchdog(void)
+{
+	outb(SM_ENDWATCH, SM_REGINDEX);
+}
+
+static void supermicro_new_pre_start(unsigned int heartbeat)
+{
+	unsigned int val;
+
+	supermicro_new_unlock_watchdog();
+
+	/* Watchdog timer setting needs to be in seconds*/
+	outb(SM_COUNTMODE, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val &= 0xF7;
+	outb(val, SM_DATAIO);
+
+	/* Write heartbeat interval to WDOG */
+	outb (SM_WATCHTIMER, SM_REGINDEX);
+	outb((heartbeat & 255), SM_DATAIO);
+
+	/* Make sure keyboard/mouse interrupts don't interfere */
+	outb(SM_RESETCONTROL, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val &= 0x3f;
+	outb(val, SM_DATAIO);
+
+	/* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
+	outb(SM_WATCHENABLE, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val |= 0x01;
+	outb(val, SM_DATAIO);
+
+	supermicro_new_lock_watchdog();
+}
+
+static void supermicro_new_pre_stop(void)
+{
+	unsigned int val;
+
+	supermicro_new_unlock_watchdog();
+
+	/* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
+	outb(SM_WATCHENABLE, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val &= 0xFE;
+	outb(val, SM_DATAIO);
+
+	supermicro_new_lock_watchdog();
+}
+
+static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
+{
+	supermicro_new_unlock_watchdog();
+
+	/* reset watchdog timeout to heartveat value */
+	outb(SM_WATCHTIMER, SM_REGINDEX);
+	outb((heartbeat & 255), SM_DATAIO);
+
+	supermicro_new_lock_watchdog();
+}
+
+/*
+ *	Generic Support Functions
+ */
+
+void iTCO_vendor_pre_start(unsigned long acpibase,
+			   unsigned int heartbeat)
+{
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_start(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		supermicro_new_pre_start(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_start);
+
+void iTCO_vendor_pre_stop(unsigned long acpibase)
+{
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_stop(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		supermicro_new_pre_stop();
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_stop);
+
+void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat)
+{
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_keepalive(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		supermicro_new_pre_set_heartbeat(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
+
+void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
+{
+	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		supermicro_new_pre_set_heartbeat(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
+
+int iTCO_vendor_check_noreboot_on(void)
+{
+	switch(vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
+		return 0;
+	default:
+		return 1;
+	}
+}
+EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
+
+static int __init iTCO_vendor_init_module(void)
+{
+	printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
+	return 0;
+}
+
+static void __exit iTCO_vendor_exit_module(void)
+{
+	printk (KERN_INFO PFX "Module Unloaded\n");
+}
+
+module_init(iTCO_vendor_init_module);
+module_exit(iTCO_vendor_exit_module);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, R. Seretny <lkpatches@paypc.com>");
+MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+