diff options
Diffstat (limited to 'drivers/char/viocons.c')
| -rw-r--r-- | drivers/char/viocons.c | 1171 |
1 files changed, 0 insertions, 1171 deletions
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c deleted file mode 100644 index 65fb848e1cc..00000000000 --- a/drivers/char/viocons.c +++ /dev/null @@ -1,1171 +0,0 @@ -/* -*- linux-c -*- - * - * drivers/char/viocons.c - * - * iSeries Virtual Terminal - * - * Authors: Dave Boutcher <boutcher@us.ibm.com> - * Ryan Arnold <ryanarn@us.ibm.com> - * Colin Devilbiss <devilbis@us.ibm.com> - * Stephen Rothwell - * - * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) anyu later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/proc_fs.h> -#include <linux/errno.h> -#include <linux/vmalloc.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/module.h> -#include <asm/uaccess.h> -#include <linux/init.h> -#include <linux/wait.h> -#include <linux/spinlock.h> -#include <asm/ioctls.h> -#include <linux/kd.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/sysrq.h> - -#include <asm/firmware.h> -#include <asm/iseries/vio.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/iseries/hv_call_event.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/hv_call.h> - -#ifdef CONFIG_VT -#error You must turn off CONFIG_VT to use CONFIG_VIOCONS -#endif - -#define VIOTTY_MAGIC (0x0DCB) -#define VTTY_PORTS 10 - -#define VIOCONS_KERN_WARN KERN_WARNING "viocons: " -#define VIOCONS_KERN_INFO KERN_INFO "viocons: " - -static DEFINE_SPINLOCK(consolelock); -static DEFINE_SPINLOCK(consoleloglock); - -static int vio_sysrq_pressed; - -#define VIOCHAR_NUM_BUF 16 - -/* - * Our port information. We store a pointer to one entry in the - * tty_driver_data - */ -static struct port_info { - int magic; - struct tty_struct *tty; - HvLpIndex lp; - u8 vcons; - u64 seq; /* sequence number of last HV send */ - u64 ack; /* last ack from HV */ -/* - * When we get writes faster than we can send it to the partition, - * buffer the data here. Note that used is a bit map of used buffers. - * It had better have enough bits to hold VIOCHAR_NUM_BUF the bitops assume - * it is a multiple of unsigned long - */ - unsigned long used; - u8 *buffer[VIOCHAR_NUM_BUF]; - int bufferBytes[VIOCHAR_NUM_BUF]; - int curbuf; - int bufferOverflow; - int overflowMessage; -} port_info[VTTY_PORTS]; - -#define viochar_is_console(pi) ((pi) == &port_info[0]) -#define viochar_port(pi) ((pi) - &port_info[0]) - -static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp); - -static struct tty_driver *viotty_driver; - -static void hvlog(char *fmt, ...) -{ - int i; - unsigned long flags; - va_list args; - static char buf[256]; - - spin_lock_irqsave(&consoleloglock, flags); - va_start(args, fmt); - i = vscnprintf(buf, sizeof(buf) - 1, fmt, args); - va_end(args); - buf[i++] = '\r'; - HvCall_writeLogBuffer(buf, i); - spin_unlock_irqrestore(&consoleloglock, flags); -} - -static void hvlogOutput(const char *buf, int count) -{ - unsigned long flags; - int begin; - int index; - static const char cr = '\r'; - - begin = 0; - spin_lock_irqsave(&consoleloglock, flags); - for (index = 0; index < count; index++) { - if (buf[index] == '\n') { - /* - * Start right after the last '\n' or at the zeroth - * array position and output the number of characters - * including the newline. - */ - HvCall_writeLogBuffer(&buf[begin], index - begin + 1); - begin = index + 1; - HvCall_writeLogBuffer(&cr, 1); - } - } - if ((index - begin) > 0) - HvCall_writeLogBuffer(&buf[begin], index - begin); - spin_unlock_irqrestore(&consoleloglock, flags); -} - -/* - * Make sure we're pointing to a valid port_info structure. Shamelessly - * plagerized from serial.c - */ -static inline int viotty_paranoia_check(struct port_info *pi, - char *name, const char *routine) -{ - static const char *bad_pi_addr = VIOCONS_KERN_WARN - "warning: bad address for port_info struct (%s) in %s\n"; - static const char *badmagic = VIOCONS_KERN_WARN - "warning: bad magic number for port_info struct (%s) in %s\n"; - - if ((pi < &port_info[0]) || (viochar_port(pi) > VTTY_PORTS)) { - printk(bad_pi_addr, name, routine); - return 1; - } - if (pi->magic != VIOTTY_MAGIC) { - printk(badmagic, name, routine); - return 1; - } - return 0; -} - -/* - * Add data to our pending-send buffers. - * - * NOTE: Don't use printk in here because it gets nastily recursive. - * hvlog can be used to log to the hypervisor buffer - */ -static int buffer_add(struct port_info *pi, const char *buf, size_t len) -{ - size_t bleft; - size_t curlen; - const char *curbuf; - int nextbuf; - - curbuf = buf; - bleft = len; - while (bleft > 0) { - /* - * If there is no space left in the current buffer, we have - * filled everything up, so return. If we filled the previous - * buffer we would already have moved to the next one. - */ - if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) { - hvlog ("\n\rviocons: No overflow buffer available for memcpy().\n"); - pi->bufferOverflow++; - pi->overflowMessage = 1; - break; - } - - /* - * Turn on the "used" bit for this buffer. If it's already on, - * that's fine. - */ - set_bit(pi->curbuf, &pi->used); - - /* - * See if this buffer has been allocated. If not, allocate it. - */ - if (pi->buffer[pi->curbuf] == NULL) { - pi->buffer[pi->curbuf] = - kmalloc(VIOCHAR_MAX_DATA, GFP_ATOMIC); - if (pi->buffer[pi->curbuf] == NULL) { - hvlog("\n\rviocons: kmalloc failed allocating spaces for buffer %d.", - pi->curbuf); - break; - } - } - - /* Figure out how much we can copy into this buffer. */ - if (bleft < (VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf])) - curlen = bleft; - else - curlen = VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf]; - - /* Copy the data into the buffer. */ - memcpy(pi->buffer[pi->curbuf] + pi->bufferBytes[pi->curbuf], - curbuf, curlen); - - pi->bufferBytes[pi->curbuf] += curlen; - curbuf += curlen; - bleft -= curlen; - - /* - * Now see if we've filled this buffer. If not then - * we'll try to use it again later. If we've filled it - * up then we'll advance the curbuf to the next in the - * circular queue. - */ - if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) { - nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF; - /* - * Move to the next buffer if it hasn't been used yet - */ - if (test_bit(nextbuf, &pi->used) == 0) - pi->curbuf = nextbuf; - } - } - return len - bleft; -} - -/* - * Send pending data - * - * NOTE: Don't use printk in here because it gets nastily recursive. - * hvlog can be used to log to the hypervisor buffer - */ -static void send_buffers(struct port_info *pi) -{ - HvLpEvent_Rc hvrc; - int nextbuf; - struct viocharlpevent *viochar; - unsigned long flags; - - spin_lock_irqsave(&consolelock, flags); - - viochar = (struct viocharlpevent *) - vio_get_event_buffer(viomajorsubtype_chario); - - /* Make sure we got a buffer */ - if (viochar == NULL) { - hvlog("\n\rviocons: Can't get viochar buffer in sendBuffers()."); - spin_unlock_irqrestore(&consolelock, flags); - return; - } - - if (pi->used == 0) { - hvlog("\n\rviocons: in sendbuffers(), but no buffers used.\n"); - vio_free_event_buffer(viomajorsubtype_chario, viochar); - spin_unlock_irqrestore(&consolelock, flags); - return; - } - - /* - * curbuf points to the buffer we're filling. We want to - * start sending AFTER this one. - */ - nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF; - - /* - * Loop until we find a buffer with the used bit on - */ - while (test_bit(nextbuf, &pi->used) == 0) - nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF; - - initDataEvent(viochar, pi->lp); - - /* - * While we have buffers with data, and our send window - * is open, send them - */ - while ((test_bit(nextbuf, &pi->used)) && - ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { - viochar->len = pi->bufferBytes[nextbuf]; - viochar->event.xCorrelationToken = pi->seq++; - viochar->event.xSizeMinus1 = - offsetof(struct viocharlpevent, data) + viochar->len; - - memcpy(viochar->data, pi->buffer[nextbuf], viochar->len); - - hvrc = HvCallEvent_signalLpEvent(&viochar->event); - if (hvrc) { - /* - * MUST unlock the spinlock before doing a printk - */ - vio_free_event_buffer(viomajorsubtype_chario, viochar); - spin_unlock_irqrestore(&consolelock, flags); - - printk(VIOCONS_KERN_WARN - "error sending event! return code %d\n", - (int)hvrc); - return; - } - - /* - * clear the used bit, zero the number of bytes in - * this buffer, and move to the next buffer - */ - clear_bit(nextbuf, &pi->used); - pi->bufferBytes[nextbuf] = 0; - nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF; - } - - /* - * If we have emptied all the buffers, start at 0 again. - * this will re-use any allocated buffers - */ - if (pi->used == 0) { - pi->curbuf = 0; - - if (pi->overflowMessage) - pi->overflowMessage = 0; - - if (pi->tty) { - tty_wakeup(pi->tty); - } - } - - vio_free_event_buffer(viomajorsubtype_chario, viochar); - spin_unlock_irqrestore(&consolelock, flags); -} - -/* - * Our internal writer. Gets called both from the console device and - * the tty device. the tty pointer will be NULL if called from the console. - * Return total number of bytes "written". - * - * NOTE: Don't use printk in here because it gets nastily recursive. hvlog - * can be used to log to the hypervisor buffer - */ -static int internal_write(struct port_info *pi, const char *buf, size_t len) -{ - HvLpEvent_Rc hvrc; - size_t bleft; - size_t curlen; - const char *curbuf; - unsigned long flags; - struct viocharlpevent *viochar; - - /* - * Write to the hvlog of inbound data are now done prior to - * calling internal_write() since internal_write() is only called in - * the event that an lp event path is active, which isn't the case for - * logging attempts prior to console initialization. - * - * If there is already data queued for this port, send it prior to - * attempting to send any new data. - */ - if (pi->used) - send_buffers(pi); - - spin_lock_irqsave(&consolelock, flags); - - viochar = vio_get_event_buffer(viomajorsubtype_chario); - if (viochar == NULL) { - spin_unlock_irqrestore(&consolelock, flags); - hvlog("\n\rviocons: Can't get vio buffer in internal_write()."); - return -EAGAIN; - } - initDataEvent(viochar, pi->lp); - - curbuf = buf; - bleft = len; - - while ((bleft > 0) && (pi->used == 0) && - ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { - if (bleft > VIOCHAR_MAX_DATA) - curlen = VIOCHAR_MAX_DATA; - else - curlen = bleft; - - viochar->event.xCorrelationToken = pi->seq++; - memcpy(viochar->data, curbuf, curlen); - viochar->len = curlen; - viochar->event.xSizeMinus1 = - offsetof(struct viocharlpevent, data) + curlen; - - hvrc = HvCallEvent_signalLpEvent(&viochar->event); - if (hvrc) { - hvlog("viocons: error sending event! %d\n", (int)hvrc); - goto out; - } - curbuf += curlen; - bleft -= curlen; - } - - /* If we didn't send it all, buffer as much of it as we can. */ - if (bleft > 0) - bleft -= buffer_add(pi, curbuf, bleft); -out: - vio_free_event_buffer(viomajorsubtype_chario, viochar); - spin_unlock_irqrestore(&consolelock, flags); - return len - bleft; -} - -static struct port_info *get_port_data(struct tty_struct *tty) -{ - unsigned long flags; - struct port_info *pi; - - spin_lock_irqsave(&consolelock, flags); - if (tty) { - pi = (struct port_info *)tty->driver_data; - if (!pi || viotty_paranoia_check(pi, tty->name, - "get_port_data")) { - pi = NULL; - } - } else - /* - * If this is the console device, use the lp from - * the first port entry - */ - pi = &port_info[0]; - spin_unlock_irqrestore(&consolelock, flags); - return pi; -} - -/* - * Initialize the common fields in a charLpEvent - */ -static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp) -{ - struct HvLpEvent *hev = &viochar->event; - - memset(viochar, 0, sizeof(struct viocharlpevent)); - - hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK | - HV_LP_EVENT_INT; - hev->xType = HvLpEvent_Type_VirtualIo; - hev->xSubtype = viomajorsubtype_chario | viochardata; - hev->xSourceLp = HvLpConfig_getLpIndex(); - hev->xTargetLp = lp; - hev->xSizeMinus1 = sizeof(struct viocharlpevent); - hev->xSourceInstanceId = viopath_sourceinst(lp); - hev->xTargetInstanceId = viopath_targetinst(lp); -} - -/* - * early console device write - */ -static void viocons_write_early(struct console *co, const char *s, unsigned count) -{ - hvlogOutput(s, count); -} - -/* - * console device write - */ -static void viocons_write(struct console *co, const char *s, unsigned count) -{ - int index; - int begin; - struct port_info *pi; - - static const char cr = '\r'; - - /* - * Check port data first because the target LP might be valid but - * simply not active, in which case we want to hvlog the output. - */ - pi = get_port_data(NULL); - if (pi == NULL) { - hvlog("\n\rviocons_write: unable to get port data."); - return; - } - - hvlogOutput(s, count); - - if (!viopath_isactive(pi->lp)) - return; - - /* - * Any newline character found will cause a - * carriage return character to be emitted as well. - */ - begin = 0; - for (index = 0; index < count; index++) { - if (s[index] == '\n') { - /* - * Newline found. Print everything up to and - * including the newline - */ - internal_write(pi, &s[begin], index - begin + 1); - begin = index + 1; - /* Emit a carriage return as well */ - internal_write(pi, &cr, 1); - } - } - - /* If any characters left to write, write them now */ - if ((index - begin) > 0) - internal_write(pi, &s[begin], index - begin); -} - -/* - * Work out the device associate with this console - */ -static struct tty_driver *viocons_device(struct console *c, int *index) -{ - *index = c->index; - return viotty_driver; -} - -/* - * console device I/O methods - */ -static struct console viocons_early = { - .name = "viocons", - .write = viocons_write_early, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static struct console viocons = { - .name = "viocons", - .write = viocons_write, - .device = viocons_device, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * TTY Open method - */ -static int viotty_open(struct tty_struct *tty, struct file *filp) -{ - int port; - unsigned long flags; - struct port_info *pi; - - port = tty->index; - - if ((port < 0) || (port >= VTTY_PORTS)) - return -ENODEV; - - spin_lock_irqsave(&consolelock, flags); - - pi = &port_info[port]; - /* If some other TTY is already connected here, reject the open */ - if ((pi->tty) && (pi->tty != tty)) { - spin_unlock_irqrestore(&consolelock, flags); - printk(VIOCONS_KERN_WARN - "attempt to open device twice from different ttys\n"); - return -EBUSY; - } - tty->driver_data = pi; - pi->tty = tty; - spin_unlock_irqrestore(&consolelock, flags); - - return 0; -} - -/* - * TTY Close method - */ -static void viotty_close(struct tty_struct *tty, struct file *filp) -{ - unsigned long flags; - struct port_info *pi; - - spin_lock_irqsave(&consolelock, flags); - pi = (struct port_info *)tty->driver_data; - - if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_close")) { - spin_unlock_irqrestore(&consolelock, flags); - return; - } - if (tty->count == 1) - pi->tty = NULL; - spin_unlock_irqrestore(&consolelock, flags); -} - -/* - * TTY Write method - */ -static int viotty_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct port_info *pi; - - pi = get_port_data(tty); - if (pi == NULL) { - hvlog("\n\rviotty_write: no port data."); - return -ENODEV; - } - - if (viochar_is_console(pi)) - hvlogOutput(buf, count); - - /* - * If the path to this LP is closed, don't bother doing anything more. - * just dump the data on the floor and return count. For some reason - * some user level programs will attempt to probe available tty's and - * they'll attempt a viotty_write on an invalid port which maps to an - * invalid target lp. If this is the case then ignore the - * viotty_write call and, since the viopath isn't active to this - * partition, return count. - */ - if (!viopath_isactive(pi->lp)) - return count; - - return internal_write(pi, buf, count); -} - -/* - * TTY put_char method - */ -static int viotty_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct port_info *pi; - - pi = get_port_data(tty); - if (pi == NULL) - return 0; - - /* This will append '\r' as well if the char is '\n' */ - if (viochar_is_console(pi)) - hvlogOutput(&ch, 1); - - if (viopath_isactive(pi->lp)) - internal_write(pi, &ch, 1); - return 1; -} - -/* - * TTY write_room method - */ -static int viotty_write_room(struct tty_struct *tty) -{ - int i; - int room = 0; - struct port_info *pi; - unsigned long flags; - - spin_lock_irqsave(&consolelock, flags); - pi = (struct port_info *)tty->driver_data; - if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_write_room")) { - spin_unlock_irqrestore(&consolelock, flags); - return 0; - } - - /* If no buffers are used, return the max size. */ - if (pi->used == 0) { - spin_unlock_irqrestore(&consolelock, flags); - return VIOCHAR_MAX_DATA * VIOCHAR_NUM_BUF; - } - - /* - * We retain the spinlock because we want to get an accurate - * count and it can change on us between each operation if we - * don't hold the spinlock. - */ - for (i = 0; ((i < VIOCHAR_NUM_BUF) && (room < VIOCHAR_MAX_DATA)); i++) - room += (VIOCHAR_MAX_DATA - pi->bufferBytes[i]); - spin_unlock_irqrestore(&consolelock, flags); - - if (room > VIOCHAR_MAX_DATA) - room = VIOCHAR_MAX_DATA; - return room; -} - -/* - * TTY chars_in_buffer method - */ -static int viotty_chars_in_buffer(struct tty_struct *tty) -{ - return 0; -} - -static int viotty_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - /* - * the ioctls below read/set the flags usually shown in the leds - * don't use them - they will go away without warning - */ - case KDGETLED: - case KDGKBLED: - return put_user(0, (char *)arg); - - case KDSKBLED: - return 0; - } - /* FIXME: WTF is this being called for ??? */ - lock_kernel(); - ret = n_tty_ioctl(tty, file, cmd, arg); - unlock_kernel(); - return ret; -} - -/* - * Handle an open charLpEvent. Could be either interrupt or ack - */ -static void vioHandleOpenEvent(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - u8 port = cevent->virtual_device; - struct port_info *pi; - int reject = 0; - - if (hvlpevent_is_ack(event)) { - if (port >= VTTY_PORTS) - return; - - spin_lock_irqsave(&consolelock, flags); - /* Got the lock, don't cause console output */ - - pi = &port_info[port]; - if (event->xRc == HvLpEvent_Rc_Good) { - pi->seq = pi->ack = 0; - /* - * This line allows connections from the primary - * partition but once one is connected from the - * primary partition nothing short of a reboot - * of linux will allow access from the hosting - * partition again without a required iSeries fix. - */ - pi->lp = event->xTargetLp; - } - - spin_unlock_irqrestore(&consolelock, flags); - if (event->xRc != HvLpEvent_Rc_Good) - printk(VIOCONS_KERN_WARN - "handle_open_event: event->xRc == (%d).\n", - event->xRc); - - if (event->xCorrelationToken != 0) { - atomic_t *aptr= (atomic_t *)event->xCorrelationToken; - atomic_set(aptr, 1); - } else - printk(VIOCONS_KERN_WARN - "weird...got open ack without atomic\n"); - return; - } - - /* This had better require an ack, otherwise complain */ - if (!hvlpevent_need_ack(event)) { - printk(VIOCONS_KERN_WARN "viocharopen without ack bit!\n"); - return; - } - - spin_lock_irqsave(&consolelock, flags); - /* Got the lock, don't cause console output */ - - /* Make sure this is a good virtual tty */ - if (port >= VTTY_PORTS) { - event->xRc = HvLpEvent_Rc_SubtypeError; - cevent->subtype_result_code = viorc_openRejected; - /* - * Flag state here since we can't printk while holding - * a spinlock. - */ - reject = 1; - } else { - pi = &port_info[port]; - if ((pi->lp != HvLpIndexInvalid) && - (pi->lp != event->xSourceLp)) { - /* - * If this is tty is already connected to a different - * partition, fail. - */ - event->xRc = HvLpEvent_Rc_SubtypeError; - cevent->subtype_result_code = viorc_openRejected; - reject = 2; - } else { - pi->lp = event->xSourceLp; - event->xRc = HvLpEvent_Rc_Good; - cevent->subtype_result_code = viorc_good; - pi->seq = pi->ack = 0; - reject = 0; - } - } - - spin_unlock_irqrestore(&consolelock, flags); - - if (reject == 1) - printk(VIOCONS_KERN_WARN "open rejected: bad virtual tty.\n"); - else if (reject == 2) - printk(VIOCONS_KERN_WARN - "open rejected: console in exclusive use by another partition.\n"); - - /* Return the acknowledgement */ - HvCallEvent_ackLpEvent(event); -} - -/* - * Handle a close charLpEvent. This should ONLY be an Interrupt because the - * virtual console should never actually issue a close event to the hypervisor - * because the virtual console never goes away. A close event coming from the - * hypervisor simply means that there are no client consoles connected to the - * virtual console. - * - * Regardless of the number of connections masqueraded on the other side of - * the hypervisor ONLY ONE close event should be called to accompany the ONE - * open event that is called. The close event should ONLY be called when NO - * MORE connections (masqueraded or not) exist on the other side of the - * hypervisor. - */ -static void vioHandleCloseEvent(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - u8 port = cevent->virtual_device; - - if (hvlpevent_is_int(event)) { - if (port >= VTTY_PORTS) { - printk(VIOCONS_KERN_WARN - "close message from invalid virtual device.\n"); - return; - } - - /* For closes, just mark the console partition invalid */ - spin_lock_irqsave(&consolelock, flags); - /* Got the lock, don't cause console output */ - - if (port_info[port].lp == event->xSourceLp) - port_info[port].lp = HvLpIndexInvalid; - - spin_unlock_irqrestore(&consolelock, flags); - printk(VIOCONS_KERN_INFO "close from %d\n", event->xSourceLp); - } else - printk(VIOCONS_KERN_WARN - "got unexpected close acknowlegement\n"); -} - -/* - * Handle a config charLpEvent. Could be either interrupt or ack - */ -static void vioHandleConfig(struct HvLpEvent *event) -{ - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - - HvCall_writeLogBuffer(cevent->data, cevent->len); - - if (cevent->data[0] == 0x01) - printk(VIOCONS_KERN_INFO "window resized to %d: %d: %d: %d\n", - cevent->data[1], cevent->data[2], - cevent->data[3], cevent->data[4]); - else - printk(VIOCONS_KERN_WARN "unknown config event\n"); -} - -/* - * Handle a data charLpEvent. - */ -static void vioHandleData(struct HvLpEvent *event) -{ - struct tty_struct *tty; - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - struct port_info *pi; - int index; - int num_pushed; - u8 port = cevent->virtual_device; - - if (port >= VTTY_PORTS) { - printk(VIOCONS_KERN_WARN "data on invalid virtual device %d\n", - port); - return; - } - - /* - * Hold the spinlock so that we don't take an interrupt that - * changes tty between the time we fetch the port_info - * pointer and the time we paranoia check. - */ - spin_lock_irqsave(&consolelock, flags); - pi = &port_info[port]; - - /* - * Change 05/01/2003 - Ryan Arnold: If a partition other than - * the current exclusive partition tries to send us data - * events then just drop them on the floor because we don't - * want his stinking data. He isn't authorized to receive - * data because he wasn't the first one to get the console, - * therefore he shouldn't be allowed to send data either. - * This will work without an iSeries fix. - */ - if (pi->lp != event->xSourceLp) { - spin_unlock_irqrestore(&consolelock, flags); - return; - } - - tty = pi->tty; - if (tty == NULL) { - spin_unlock_irqrestore(&consolelock, flags); - printk(VIOCONS_KERN_WARN "no tty for virtual device %d\n", - port); - return; - } - - if (tty->magic != TTY_MAGIC) { - spin_unlock_irqrestore(&consolelock, flags); - printk(VIOCONS_KERN_WARN "tty bad magic\n"); - return; - } - - /* - * Just to be paranoid, make sure the tty points back to this port - */ - pi = (struct port_info *)tty->driver_data; - if (!pi || viotty_paranoia_check(pi, tty->name, "vioHandleData")) { - spin_unlock_irqrestore(&consolelock, flags); - return; - } - spin_unlock_irqrestore(&consolelock, flags); - - /* - * Change 07/21/2003 - Ryan Arnold: functionality added to - * support sysrq utilizing ^O as the sysrq key. The sysrq - * functionality will only work if built into the kernel and - * then only if sysrq is enabled through the proc filesystem. - */ - num_pushed = 0; - for (index = 0; index < cevent->len; index++) { - /* - * Will be optimized away if !CONFIG_MAGIC_SYSRQ: - */ - if (sysrq_on()) { - /* 0x0f is the ascii character for ^O */ - if (cevent->data[index] == '\x0f') { - vio_sysrq_pressed = 1; - /* - * continue because we don't want to add - * the sysrq key into the data string. - */ - continue; - } else if (vio_sysrq_pressed) { - handle_sysrq(cevent->data[index], tty); - vio_sysrq_pressed = 0; - /* - * continue because we don't want to add - * the sysrq sequence into the data string. - */ - continue; - } - } - /* - * The sysrq sequence isn't included in this check if - * sysrq is enabled and compiled into the kernel because - * the sequence will never get inserted into the buffer. - * Don't attempt to copy more data into the buffer than we - * have room for because it would fail without indication. - */ - if(tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL) == 0) { - printk(VIOCONS_KERN_WARN "input buffer overflow!\n"); - break; - } - num_pushed++; - } - - if (num_pushed) - tty_flip_buffer_push(tty); -} - -/* - * Handle an ack charLpEvent. - */ -static void vioHandleAck(struct HvLpEvent *event) -{ - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - unsigned long flags; - u8 port = cevent->virtual_device; - - if (port >= VTTY_PORTS) { - printk(VIOCONS_KERN_WARN "data on invalid virtual device\n"); - return; - } - - spin_lock_irqsave(&consolelock, flags); - port_info[port].ack = event->xCorrelationToken; - spin_unlock_irqrestore(&consolelock, flags); - - if (port_info[port].used) - send_buffers(&port_info[port]); -} - -/* - * Handle charLpEvents and route to the appropriate routine - */ -static void vioHandleCharEvent(struct HvLpEvent *event) -{ - int charminor; - - if (event == NULL) - return; - - charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; - switch (charminor) { - case viocharopen: - vioHandleOpenEvent(event); - break; - case viocharclose: - vioHandleCloseEvent(event); - break; - case viochardata: - vioHandleData(event); - break; - case viocharack: - vioHandleAck(event); - break; - case viocharconfig: - vioHandleConfig(event); - break; - default: - if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - } -} - -/* - * Send an open event - */ -static int send_open(HvLpIndex remoteLp, void *sem) -{ - return HvCallEvent_signalLpEventFast(remoteLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_chario | viocharopen, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(remoteLp), - viopath_targetinst(remoteLp), - (u64)(unsigned long)sem, VIOVERSION << 16, - 0, 0, 0, 0); -} - -static const struct tty_operations serial_ops = { - .open = viotty_open, - .close = viotty_close, - .write = viotty_write, - .put_char = viotty_put_char, - .write_room = viotty_write_room, - .chars_in_buffer = viotty_chars_in_buffer, - .ioctl = viotty_ioctl, -}; - -static int __init viocons_init2(void) -{ - atomic_t wait_flag; - int rc; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -ENODEV; - - /* +2 for fudge */ - rc = viopath_open(HvLpConfig_getPrimaryLpIndex(), - viomajorsubtype_chario, VIOCHAR_WINDOW + 2); - if (rc) - printk(VIOCONS_KERN_WARN "error opening to primary %d\n", rc); - - if (viopath_hostLp == HvLpIndexInvalid) - vio_set_hostlp(); - - /* - * And if the primary is not the same as the hosting LP, open to the - * hosting lp - */ - if ((viopath_hostLp != HvLpIndexInvalid) && - (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) { - printk(VIOCONS_KERN_INFO "open path to hosting (%d)\n", - viopath_hostLp); - rc = viopath_open(viopath_hostLp, viomajorsubtype_chario, - VIOCHAR_WINDOW + 2); /* +2 for fudge */ - if (rc) - printk(VIOCONS_KERN_WARN - "error opening to partition %d: %d\n", - viopath_hostLp, rc); - } - - if (vio_setHandler(viomajorsubtype_chario, vioHandleCharEvent) < 0) - printk(VIOCONS_KERN_WARN - "error seting handler for console events!\n"); - - /* - * First, try to open the console to the hosting lp. - * Wait on a semaphore for the response. - */ - atomic_set(&wait_flag, 0); - if ((viopath_isactive(viopath_hostLp)) && - (send_open(viopath_hostLp, (void *)&wait_flag) == 0)) { - printk(VIOCONS_KERN_INFO "hosting partition %d\n", - viopath_hostLp); - while (atomic_read(&wait_flag) == 0) - mb(); - atomic_set(&wait_flag, 0); - } - - /* - * If we don't have an active console, try the primary - */ - if ((!viopath_isactive(port_info[0].lp)) && - (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) && - (send_open(HvLpConfig_getPrimaryLpIndex(), (void *)&wait_flag) - == 0)) { - printk(VIOCONS_KERN_INFO "opening console to primary partition\n"); - while (atomic_read(&wait_flag) == 0) - mb(); - } - - /* Initialize the tty_driver structure */ - viotty_driver = alloc_tty_driver(VTTY_PORTS); - viotty_driver->owner = THIS_MODULE; - viotty_driver->driver_name = "vioconsole"; - viotty_driver->name = "tty"; - viotty_driver->name_base = 1; - viotty_driver->major = TTY_MAJOR; - viotty_driver->minor_start = 1; - viotty_driver->type = TTY_DRIVER_TYPE_CONSOLE; - viotty_driver->subtype = 1; - viotty_driver->init_termios = tty_std_termios; - viotty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; - tty_set_operations(viotty_driver, &serial_ops); - - if (tty_register_driver(viotty_driver)) { - printk(VIOCONS_KERN_WARN "couldn't register console driver\n"); - put_tty_driver(viotty_driver); - viotty_driver = NULL; - } - - unregister_console(&viocons_early); - register_console(&viocons); - - return 0; -} - -static int __init viocons_init(void) -{ - int i; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -ENODEV; - - printk(VIOCONS_KERN_INFO "registering console\n"); - for (i = 0; i < VTTY_PORTS; i++) { - port_info[i].lp = HvLpIndexInvalid; - port_info[i].magic = VIOTTY_MAGIC; - } - HvCall_setLogBufferFormatAndCodepage(HvCall_LogBuffer_ASCII, 437); - add_preferred_console("viocons", 0, NULL); - register_console(&viocons_early); - return 0; -} - -console_initcall(viocons_init); -module_init(viocons_init2); |