diff options
Diffstat (limited to 'drivers/char/toshiba.c')
| -rw-r--r-- | drivers/char/toshiba.c | 532 |
1 files changed, 532 insertions, 0 deletions
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c new file mode 100644 index 00000000000..58e21fe4426 --- /dev/null +++ b/drivers/char/toshiba.c @@ -0,0 +1,532 @@ +/* toshiba.c -- Linux driver for accessing the SMM on Toshiba laptops + * + * Copyright (c) 1996-2001 Jonathan A. Buzzard (jonathan@buzzard.org.uk) + * + * Valuable assistance and patches from: + * Tom May <tom@you-bastards.com> + * Rob Napier <rnapier@employees.org> + * + * Fn status port numbers for machine ID's courtesy of + * 0xfc02: Scott Eisert <scott.e@sky-eye.com> + * 0xfc04: Steve VanDevender <stevev@efn.org> + * 0xfc08: Garth Berry <garth@itsbruce.net> + * 0xfc0a: Egbert Eich <eich@xfree86.org> + * 0xfc10: Andrew Lofthouse <Andrew.Lofthouse@robins.af.mil> + * 0xfc11: Spencer Olson <solson@novell.com> + * 0xfc13: Claudius Frankewitz <kryp@gmx.de> + * 0xfc15: Tom May <tom@you-bastards.com> + * 0xfc17: Dave Konrad <konrad@xenia.it> + * 0xfc1a: George Betzos <betzos@engr.colostate.edu> + * 0xfc1b: Munemasa Wada <munemasa@jnovel.co.jp> + * 0xfc1d: Arthur Liu <armie@slap.mine.nu> + * 0xfc5a: Jacques L'helgoualc'h <lhh@free.fr> + * 0xfcd1: Mr. Dave Konrad <konrad@xenia.it> + * + * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING + * + * This code is covered by the GNU GPL and you are free to make any + * changes you wish to it under the terms of the license. However the + * code has the potential to render your computer and/or someone else's + * unusable. Please proceed with care when modifying the code. + * + * Note: Unfortunately the laptop hardware can close the System Configuration + * Interface on it's own accord. It is therefore necessary for *all* + * programs using this driver to be aware that *any* SCI call can fail at + * *any* time. It is up to any program to be aware of this eventuality + * and take appropriate steps. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The information used to write this driver has been obtained by reverse + * engineering the software supplied by Toshiba for their portable computers in + * strict accordance with the European Council Directive 92/250/EEC on the legal + * protection of computer programs, and it's implementation into English Law by + * the Copyright (Computer Programs) Regulations 1992 (S.I. 1992 No.3233). + * + */ + +#define TOSH_VERSION "1.11 26/9/2001" +#define TOSH_DEBUG 0 + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/miscdevice.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <linux/init.h> +#include <linux/stat.h> +#include <linux/proc_fs.h> + +#include <linux/toshiba.h> + +#define TOSH_MINOR_DEV 181 + +static int tosh_id = 0x0000; +static int tosh_bios = 0x0000; +static int tosh_date = 0x0000; +static int tosh_sci = 0x0000; +static int tosh_fan = 0; + +static int tosh_fn = 0; + +module_param(tosh_fn, int, 0); + + +static int tosh_ioctl(struct inode *, struct file *, unsigned int, + unsigned long); + + +static struct file_operations tosh_fops = { + .owner = THIS_MODULE, + .ioctl = tosh_ioctl, +}; + +static struct miscdevice tosh_device = { + TOSH_MINOR_DEV, + "toshiba", + &tosh_fops +}; + +/* + * Read the Fn key status + */ +#ifdef CONFIG_PROC_FS +static int tosh_fn_status(void) +{ + unsigned char scan; + unsigned long flags; + + if (tosh_fn!=0) { + scan = inb(tosh_fn); + } else { + local_irq_save(flags); + outb(0x8e, 0xe4); + scan = inb(0xe5); + local_irq_restore(flags); + } + + return (int) scan; +} +#endif + + +/* + * For the Portage 610CT and the Tecra 700CS/700CDT emulate the HCI fan function + */ +static int tosh_emulate_fan(SMMRegisters *regs) +{ + unsigned long eax,ecx,flags; + unsigned char al; + + eax = regs->eax & 0xff00; + ecx = regs->ecx & 0xffff; + + /* Portage 610CT */ + + if (tosh_id==0xfccb) { + if (eax==0xfe00) { + /* fan status */ + local_irq_save(flags); + outb(0xbe, 0xe4); + al = inb(0xe5); + local_irq_restore(flags); + regs->eax = 0x00; + regs->ecx = (unsigned int) (al & 0x01); + } + if ((eax==0xff00) && (ecx==0x0000)) { + /* fan off */ + local_irq_save(flags); + outb(0xbe, 0xe4); + al = inb(0xe5); + outb(0xbe, 0xe4); + outb (al | 0x01, 0xe5); + local_irq_restore(flags); + regs->eax = 0x00; + regs->ecx = 0x00; + } + if ((eax==0xff00) && (ecx==0x0001)) { + /* fan on */ + local_irq_save(flags); + outb(0xbe, 0xe4); + al = inb(0xe5); + outb(0xbe, 0xe4); + outb(al & 0xfe, 0xe5); + local_irq_restore(flags); + regs->eax = 0x00; + regs->ecx = 0x01; + } + } + + /* Tecra 700CS/CDT */ + + if (tosh_id==0xfccc) { + if (eax==0xfe00) { + /* fan status */ + local_irq_save(flags); + outb(0xe0, 0xe4); + al = inb(0xe5); + local_irq_restore(flags); + regs->eax = 0x00; + regs->ecx = al & 0x01; + } + if ((eax==0xff00) && (ecx==0x0000)) { + /* fan off */ + local_irq_save(flags); + outb(0xe0, 0xe4); + al = inb(0xe5); + outw(0xe0 | ((al & 0xfe) << 8), 0xe4); + local_irq_restore(flags); + regs->eax = 0x00; + regs->ecx = 0x00; + } + if ((eax==0xff00) && (ecx==0x0001)) { + /* fan on */ + local_irq_save(flags); + outb(0xe0, 0xe4); + al = inb(0xe5); + outw(0xe0 | ((al | 0x01) << 8), 0xe4); + local_irq_restore(flags); + regs->eax = 0x00; + regs->ecx = 0x01; + } + } + + return 0; +} + + +/* + * Put the laptop into System Management Mode + */ +int tosh_smm(SMMRegisters *regs) +{ + int eax; + + asm ("# load the values into the registers\n\t" \ + "pushl %%eax\n\t" \ + "movl 0(%%eax),%%edx\n\t" \ + "push %%edx\n\t" \ + "movl 4(%%eax),%%ebx\n\t" \ + "movl 8(%%eax),%%ecx\n\t" \ + "movl 12(%%eax),%%edx\n\t" \ + "movl 16(%%eax),%%esi\n\t" \ + "movl 20(%%eax),%%edi\n\t" \ + "popl %%eax\n\t" \ + "# call the System Management mode\n\t" \ + "inb $0xb2,%%al\n\t" + "# fill out the memory with the values in the registers\n\t" \ + "xchgl %%eax,(%%esp)\n\t" + "movl %%ebx,4(%%eax)\n\t" \ + "movl %%ecx,8(%%eax)\n\t" \ + "movl %%edx,12(%%eax)\n\t" \ + "movl %%esi,16(%%eax)\n\t" \ + "movl %%edi,20(%%eax)\n\t" \ + "popl %%edx\n\t" \ + "movl %%edx,0(%%eax)\n\t" \ + "# setup the return value to the carry flag\n\t" \ + "lahf\n\t" \ + "shrl $8,%%eax\n\t" \ + "andl $1,%%eax\n" \ + : "=a" (eax) + : "a" (regs) + : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); + + return eax; +} + + +static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, + unsigned long arg) +{ + SMMRegisters regs; + SMMRegisters __user *argp = (SMMRegisters __user *)arg; + unsigned short ax,bx; + int err; + + if (!argp) + return -EINVAL; + + if (copy_from_user(®s, argp, sizeof(SMMRegisters))) + return -EFAULT; + + switch (cmd) { + case TOSH_SMM: + ax = regs.eax & 0xff00; + bx = regs.ebx & 0xffff; + /* block HCI calls to read/write memory & PCI devices */ + if (((ax==0xff00) || (ax==0xfe00)) && (bx>0x0069)) + return -EINVAL; + + /* do we need to emulate the fan ? */ + if (tosh_fan==1) { + if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) { + err = tosh_emulate_fan(®s); + break; + } + } + err = tosh_smm(®s); + break; + default: + return -EINVAL; + } + + if (copy_to_user(argp, ®s, sizeof(SMMRegisters))) + return -EFAULT; + + return (err==0) ? 0:-EINVAL; +} + + +/* + * Print the information for /proc/toshiba + */ +#ifdef CONFIG_PROC_FS +static int tosh_get_info(char *buffer, char **start, off_t fpos, int length) +{ + char *temp; + int key; + + temp = buffer; + key = tosh_fn_status(); + + /* Arguments + 0) Linux driver version (this will change if format changes) + 1) Machine ID + 2) SCI version + 3) BIOS version (major, minor) + 4) BIOS date (in SCI date format) + 5) Fn Key status + */ + + temp += sprintf(temp, "1.1 0x%04x %d.%d %d.%d 0x%04x 0x%02x\n", + tosh_id, + (tosh_sci & 0xff00)>>8, + tosh_sci & 0xff, + (tosh_bios & 0xff00)>>8, + tosh_bios & 0xff, + tosh_date, + key); + + return temp-buffer; +} +#endif + + +/* + * Determine which port to use for the Fn key status + */ +static void tosh_set_fn_port(void) +{ + switch (tosh_id) { + case 0xfc02: case 0xfc04: case 0xfc09: case 0xfc0a: case 0xfc10: + case 0xfc11: case 0xfc13: case 0xfc15: case 0xfc1a: case 0xfc1b: + case 0xfc5a: + tosh_fn = 0x62; + break; + case 0xfc08: case 0xfc17: case 0xfc1d: case 0xfcd1: case 0xfce0: + case 0xfce2: + tosh_fn = 0x68; + break; + default: + tosh_fn = 0x00; + break; + } + + return; +} + + +/* + * Get the machine identification number of the current model + */ +static int tosh_get_machine_id(void) +{ + int id; + SMMRegisters regs; + unsigned short bx,cx; + unsigned long address; + + id = (0x100*(int) isa_readb(0xffffe))+((int) isa_readb(0xffffa)); + + /* do we have a SCTTable machine identication number on our hands */ + + if (id==0xfc2f) { + + /* start by getting a pointer into the BIOS */ + + regs.eax = 0xc000; + regs.ebx = 0x0000; + regs.ecx = 0x0000; + tosh_smm(®s); + bx = (unsigned short) (regs.ebx & 0xffff); + + /* At this point in the Toshiba routines under MS Windows + the bx register holds 0xe6f5. However my code is producing + a different value! For the time being I will just fudge the + value. This has been verified on a Satellite Pro 430CDT, + Tecra 750CDT, Tecra 780DVD and Satellite 310CDT. */ +#if TOSH_DEBUG + printk("toshiba: debugging ID ebx=0x%04x\n", regs.ebx); +#endif + bx = 0xe6f5; + + /* now twiddle with our pointer a bit */ + + address = 0x000f0000+bx; + cx = isa_readw(address); + address = 0x000f0009+bx+cx; + cx = isa_readw(address); + address = 0x000f000a+cx; + cx = isa_readw(address); + + /* now construct our machine identification number */ + + id = ((cx & 0xff)<<8)+((cx & 0xff00)>>8); + } + + return id; +} + + +/* + * Probe for the presence of a Toshiba laptop + * + * returns and non-zero if unable to detect the presence of a Toshiba + * laptop, otherwise zero and determines the Machine ID, BIOS version and + * date, and SCI version. + */ +static int tosh_probe(void) +{ + int i,major,minor,day,year,month,flag; + unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 }; + SMMRegisters regs; + + /* extra sanity check for the string "TOSHIBA" in the BIOS because + some machines that are not Toshiba's pass the next test */ + + for (i=0;i<7;i++) { + if (isa_readb(0xfe010+i)!=signature[i]) { + printk("toshiba: not a supported Toshiba laptop\n"); + return -ENODEV; + } + } + + /* call the Toshiba SCI support check routine */ + + regs.eax = 0xf0f0; + regs.ebx = 0x0000; + regs.ecx = 0x0000; + flag = tosh_smm(®s); + + /* if this is not a Toshiba laptop carry flag is set and ah=0x86 */ + + if ((flag==1) || ((regs.eax & 0xff00)==0x8600)) { + printk("toshiba: not a supported Toshiba laptop\n"); + return -ENODEV; + } + + /* if we get this far then we are running on a Toshiba (probably)! */ + + tosh_sci = regs.edx & 0xffff; + + /* next get the machine ID of the current laptop */ + + tosh_id = tosh_get_machine_id(); + + /* get the BIOS version */ + + major = isa_readb(0xfe009)-'0'; + minor = ((isa_readb(0xfe00b)-'0')*10)+(isa_readb(0xfe00c)-'0'); + tosh_bios = (major*0x100)+minor; + + /* get the BIOS date */ + + day = ((isa_readb(0xffff5)-'0')*10)+(isa_readb(0xffff6)-'0'); + month = ((isa_readb(0xffff8)-'0')*10)+(isa_readb(0xffff9)-'0'); + year = ((isa_readb(0xffffb)-'0')*10)+(isa_readb(0xffffc)-'0'); + tosh_date = (((year-90) & 0x1f)<<10) | ((month & 0xf)<<6) + | ((day & 0x1f)<<1); + + + /* in theory we should check the ports we are going to use for the + fn key detection (and the fan on the Portage 610/Tecra700), and + then request them to stop other drivers using them. However as + the keyboard driver grabs 0x60-0x6f and the pic driver grabs + 0xa0-0xbf we can't. We just have to live dangerously and use the + ports anyway, oh boy! */ + + /* do we need to emulate the fan? */ + + if ((tosh_id==0xfccb) || (tosh_id==0xfccc)) + tosh_fan = 1; + + return 0; +} + +int __init tosh_init(void) +{ + int retval; + /* are we running on a Toshiba laptop */ + + if (tosh_probe()!=0) + return -EIO; + + printk(KERN_INFO "Toshiba System Managment Mode driver v" + TOSH_VERSION"\n"); + + /* set the port to use for Fn status if not specified as a parameter */ + if (tosh_fn==0x00) + tosh_set_fn_port(); + + /* register the device file */ + retval = misc_register(&tosh_device); + if(retval < 0) + return retval; + +#ifdef CONFIG_PROC_FS + /* register the proc entry */ + if(create_proc_info_entry("toshiba", 0, NULL, tosh_get_info) == NULL){ + misc_deregister(&tosh_device); + return -ENOMEM; + } +#endif + + return 0; +} + +#ifdef MODULE +int init_module(void) +{ + return tosh_init(); +} + +void cleanup_module(void) +{ + /* remove the proc entry */ + + remove_proc_entry("toshiba", NULL); + + /* unregister the device file */ + + misc_deregister(&tosh_device); +} +#endif + +MODULE_LICENSE("GPL"); +MODULE_PARM_DESC(tosh_fn, "User specified Fn key detection port"); +MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>"); +MODULE_DESCRIPTION("Toshiba laptop SMM driver"); +MODULE_SUPPORTED_DEVICE("toshiba"); + |