diff options
Diffstat (limited to 'drivers/char/rio/map.h')
| -rw-r--r-- | drivers/char/rio/map.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/char/rio/map.h b/drivers/char/rio/map.h new file mode 100644 index 00000000000..400645a1ff2 --- /dev/null +++ b/drivers/char/rio/map.h @@ -0,0 +1,103 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : map.h +** SID : 1.2 +** Last Modified : 11/6/98 11:34:11 +** Retrieved : 11/6/98 11:34:21 +** +** ident @(#)map.h 1.2 +** +** ----------------------------------------------------------------------------- +*/ + +#ifndef __rio_map_h__ +#define __rio_map_h__ + +#ifdef SCCS_LABELS +static char *_map_h_sccs_ = "@(#)map.h 1.2"; +#endif + +/* +** mapping structure passed to and from the config.rio program to +** determine the current topology of the world +*/ + +#define MAX_MAP_ENTRY 17 +#define TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS) +#define MAX_NAME_LEN 32 + +struct Map +{ + uint HostUniqueNum; /* Supporting hosts unique number */ + uint RtaUniqueNum; /* Unique number */ + /* + ** The next two IDs must be swapped on big-endian architectures + ** when using a v2.04 /etc/rio/config with a v3.00 driver (when + ** upgrading for example). + */ + ushort ID; /* ID used in the subnet */ + ushort ID2; /* ID of 2nd block of 8 for 16 port */ + ulong Flags; /* Booted, ID Given, Disconnected */ + ulong SysPort; /* First tty mapped to this port */ + struct Top Topology[LINKS_PER_UNIT]; /* ID connected to each link */ + char Name[MAX_NAME_LEN]; /* Cute name by which RTA is known */ +}; + +/* +** Flag values: +*/ +#define RTA_BOOTED 0x00000001 +#define RTA_NEWBOOT 0x00000010 +#define MSG_DONE 0x00000020 +#define RTA_INTERCONNECT 0x00000040 +#define RTA16_SECOND_SLOT 0x00000080 +#define BEEN_HERE 0x00000100 +#define SLOT_TENTATIVE 0x40000000 +#define SLOT_IN_USE 0x80000000 + +/* +** HostUniqueNum is the unique number from the host card that this RTA +** is to be connected to. +** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO +** if the slot in the table is unused. If it is the same as the HostUniqueNum +** then this slot represents a host card. +** Flags contains current boot/route state info +** SysPort is a value in the range 0-504, being the number of the first tty +** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8. +** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor +** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256, +** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511 +** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an +** unused slot/unknown ID etc. +** The Topology array contains the ID of the unit connected to each of the +** four links on this unit. The entry will be 0xFFFF if NOTHING is connected +** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link. +** The Name field is a null-terminated string, upto 31 characters, containing +** the 'cute' name that the sysadmin/users know the RTA by. It is permissible +** for this string to contain any character in the range \040 to \176 inclusive. +** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The +** special character '%' IS allowable, and needs no special action. +** +*/ + +#endif |