diff options
Diffstat (limited to 'drivers/char/mxser.c')
| -rw-r--r-- | drivers/char/mxser.c | 2757 |
1 files changed, 0 insertions, 2757 deletions
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c deleted file mode 100644 index dd9d75351cd..00000000000 --- a/drivers/char/mxser.c +++ /dev/null @@ -1,2757 +0,0 @@ -/* - * mxser.c -- MOXA Smartio/Industio family multiport serial driver. - * - * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). - * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com> - * - * This code is loosely based on the 1.8 moxa driver which is based on - * Linux serial driver, written by Linus Torvalds, Theodore T'so and - * others. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on - * www.moxa.com. - * - Fixed x86_64 cleanness - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/bitops.h> -#include <linux/slab.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> - -#include "mxser.h" - -#define MXSER_VERSION "2.0.5" /* 1.14 */ -#define MXSERMAJOR 174 - -#define MXSER_BOARDS 4 /* Max. boards */ -#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ -#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) -#define MXSER_ISR_PASS_LIMIT 100 - -/*CheckIsMoxaMust return value*/ -#define MOXA_OTHER_UART 0x00 -#define MOXA_MUST_MU150_HWID 0x01 -#define MOXA_MUST_MU860_HWID 0x02 - -#define WAKEUP_CHARS 256 - -#define UART_MCR_AFE 0x20 -#define UART_LSR_SPECIAL 0x1E - -#define PCI_DEVICE_ID_POS104UL 0x1044 -#define PCI_DEVICE_ID_CB108 0x1080 -#define PCI_DEVICE_ID_CP102UF 0x1023 -#define PCI_DEVICE_ID_CP112UL 0x1120 -#define PCI_DEVICE_ID_CB114 0x1142 -#define PCI_DEVICE_ID_CP114UL 0x1143 -#define PCI_DEVICE_ID_CB134I 0x1341 -#define PCI_DEVICE_ID_CP138U 0x1380 - - -#define C168_ASIC_ID 1 -#define C104_ASIC_ID 2 -#define C102_ASIC_ID 0xB -#define CI132_ASIC_ID 4 -#define CI134_ASIC_ID 3 -#define CI104J_ASIC_ID 5 - -#define MXSER_HIGHBAUD 1 -#define MXSER_HAS2 2 - -/* This is only for PCI */ -static const struct { - int type; - int tx_fifo; - int rx_fifo; - int xmit_fifo_size; - int rx_high_water; - int rx_trigger; - int rx_low_water; - long max_baud; -} Gpci_uart_info[] = { - {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, - {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, - {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} -}; -#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) - -struct mxser_cardinfo { - char *name; - unsigned int nports; - unsigned int flags; -}; - -static const struct mxser_cardinfo mxser_cards[] = { -/* 0*/ { "C168 series", 8, }, - { "C104 series", 4, }, - { "CI-104J series", 4, }, - { "C168H/PCI series", 8, }, - { "C104H/PCI series", 4, }, -/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ - { "CI-132 series", 4, MXSER_HAS2 }, - { "CI-134 series", 4, }, - { "CP-132 series", 2, }, - { "CP-114 series", 4, }, -/*10*/ { "CT-114 series", 4, }, - { "CP-102 series", 2, MXSER_HIGHBAUD }, - { "CP-104U series", 4, }, - { "CP-168U series", 8, }, - { "CP-132U series", 2, }, -/*15*/ { "CP-134U series", 4, }, - { "CP-104JU series", 4, }, - { "Moxa UC7000 Serial", 8, }, /* RC7000 */ - { "CP-118U series", 8, }, - { "CP-102UL series", 2, }, -/*20*/ { "CP-102U series", 2, }, - { "CP-118EL series", 8, }, - { "CP-168EL series", 8, }, - { "CP-104EL series", 4, }, - { "CB-108 series", 8, }, -/*25*/ { "CB-114 series", 4, }, - { "CB-134I series", 4, }, - { "CP-138U series", 8, }, - { "POS-104UL series", 4, }, - { "CP-114UL series", 4, }, -/*30*/ { "CP-102UF series", 2, }, - { "CP-112UL series", 2, }, -}; - -/* driver_data correspond to the lines in the structure above - see also ISA probe function before you change something */ -static struct pci_device_id mxser_pcibrds[] = { - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, - { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, - { } -}; -MODULE_DEVICE_TABLE(pci, mxser_pcibrds); - -static unsigned long ioaddr[MXSER_BOARDS]; -static int ttymajor = MXSERMAJOR; - -/* Variables for insmod */ - -MODULE_AUTHOR("Casper Yang"); -MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, ulong, NULL, 0); -MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); -module_param(ttymajor, int, 0); -MODULE_LICENSE("GPL"); - -struct mxser_log { - int tick; - unsigned long rxcnt[MXSER_PORTS]; - unsigned long txcnt[MXSER_PORTS]; -}; - -struct mxser_mon { - unsigned long rxcnt; - unsigned long txcnt; - unsigned long up_rxcnt; - unsigned long up_txcnt; - int modem_status; - unsigned char hold_reason; -}; - -struct mxser_mon_ext { - unsigned long rx_cnt[32]; - unsigned long tx_cnt[32]; - unsigned long up_rxcnt[32]; - unsigned long up_txcnt[32]; - int modem_status[32]; - - long baudrate[32]; - int databits[32]; - int stopbits[32]; - int parity[32]; - int flowctrl[32]; - int fifo[32]; - int iftype[32]; -}; - -struct mxser_board; - -struct mxser_port { - struct tty_port port; - struct mxser_board *board; - - unsigned long ioaddr; - unsigned long opmode_ioaddr; - int max_baud; - - int rx_high_water; - int rx_trigger; /* Rx fifo trigger level */ - int rx_low_water; - int baud_base; /* max. speed */ - int type; /* UART type */ - - int x_char; /* xon/xoff character */ - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - - unsigned char stop_rx; - unsigned char ldisc_stop_rx; - - int custom_divisor; - unsigned char err_shadow; - - struct async_icount icount; /* kernel counters for 4 input interrupts */ - int timeout; - - int read_status_mask; - int ignore_status_mask; - int xmit_fifo_size; - int xmit_head; - int xmit_tail; - int xmit_cnt; - - struct ktermios normal_termios; - - struct mxser_mon mon_data; - - spinlock_t slock; -}; - -struct mxser_board { - unsigned int idx; - int irq; - const struct mxser_cardinfo *info; - unsigned long vector; - unsigned long vector_mask; - - int chip_flag; - int uart_type; - - struct mxser_port ports[MXSER_PORTS_PER_BOARD]; -}; - -struct mxser_mstatus { - tcflag_t cflag; - int cts; - int dsr; - int ri; - int dcd; -}; - -static struct mxser_board mxser_boards[MXSER_BOARDS]; -static struct tty_driver *mxvar_sdriver; -static struct mxser_log mxvar_log; -static int mxser_set_baud_method[MXSER_PORTS + 1]; - -static void mxser_enable_must_enchance_mode(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr |= MOXA_MUST_EFR_EFRB_ENABLE; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -#ifdef CONFIG_PCI -static void mxser_disable_must_enchance_mode(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} -#endif - -static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK0; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(value, baseio + MOXA_MUST_XON1_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK0; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_set_must_fifo_value(struct mxser_port *info) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(info->ioaddr + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); - - efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK1; - - outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); - outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); - outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); - outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); - outb(oldlcr, info->ioaddr + UART_LCR); -} - -static void mxser_set_must_enum_value(unsigned long baseio, u8 value) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK2; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(value, baseio + MOXA_MUST_ENUM_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -#ifdef CONFIG_PCI -static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_BANK_MASK; - efr |= MOXA_MUST_EFR_BANK2; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} -#endif - -static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_TX_MASK; - efr |= MOXA_MUST_EFR_SF_TX1; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_TX_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - efr |= MOXA_MUST_EFR_SF_RX1; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) -{ - u8 oldlcr; - u8 efr; - - oldlcr = inb(baseio + UART_LCR); - outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); - - efr = inb(baseio + MOXA_MUST_EFR_REGISTER); - efr &= ~MOXA_MUST_EFR_SF_RX_MASK; - - outb(efr, baseio + MOXA_MUST_EFR_REGISTER); - outb(oldlcr, baseio + UART_LCR); -} - -#ifdef CONFIG_PCI -static int __devinit CheckIsMoxaMust(unsigned long io) -{ - u8 oldmcr, hwid; - int i; - - outb(0, io + UART_LCR); - mxser_disable_must_enchance_mode(io); - oldmcr = inb(io + UART_MCR); - outb(0, io + UART_MCR); - mxser_set_must_xon1_value(io, 0x11); - if ((hwid = inb(io + UART_MCR)) != 0) { - outb(oldmcr, io + UART_MCR); - return MOXA_OTHER_UART; - } - - mxser_get_must_hardware_id(io, &hwid); - for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ - if (hwid == Gpci_uart_info[i].type) - return (int)hwid; - } - return MOXA_OTHER_UART; -} -#endif - -static void process_txrx_fifo(struct mxser_port *info) -{ - int i; - - if ((info->type == PORT_16450) || (info->type == PORT_8250)) { - info->rx_trigger = 1; - info->rx_high_water = 1; - info->rx_low_water = 1; - info->xmit_fifo_size = 1; - } else - for (i = 0; i < UART_INFO_NUM; i++) - if (info->board->chip_flag == Gpci_uart_info[i].type) { - info->rx_trigger = Gpci_uart_info[i].rx_trigger; - info->rx_low_water = Gpci_uart_info[i].rx_low_water; - info->rx_high_water = Gpci_uart_info[i].rx_high_water; - info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; - break; - } -} - -static unsigned char mxser_get_msr(int baseaddr, int mode, int port) -{ - static unsigned char mxser_msr[MXSER_PORTS + 1]; - unsigned char status = 0; - - status = inb(baseaddr + UART_MSR); - - mxser_msr[port] &= 0x0F; - mxser_msr[port] |= status; - status = mxser_msr[port]; - if (mode) - mxser_msr[port] = 0; - - return status; -} - -static int mxser_carrier_raised(struct tty_port *port) -{ - struct mxser_port *mp = container_of(port, struct mxser_port, port); - return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; -} - -static void mxser_dtr_rts(struct tty_port *port, int on) -{ - struct mxser_port *mp = container_of(port, struct mxser_port, port); - unsigned long flags; - - spin_lock_irqsave(&mp->slock, flags); - if (on) - outb(inb(mp->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); - else - outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), - mp->ioaddr + UART_MCR); - spin_unlock_irqrestore(&mp->slock, flags); -} - -static int mxser_set_baud(struct tty_struct *tty, long newspd) -{ - struct mxser_port *info = tty->driver_data; - int quot = 0, baud; - unsigned char cval; - - if (!info->ioaddr) - return -1; - - if (newspd > info->max_baud) - return -1; - - if (newspd == 134) { - quot = 2 * info->baud_base / 269; - tty_encode_baud_rate(tty, 134, 134); - } else if (newspd) { - quot = info->baud_base / newspd; - if (quot == 0) - quot = 1; - baud = info->baud_base/quot; - tty_encode_baud_rate(tty, baud, baud); - } else { - quot = 0; - } - - info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); - info->timeout += HZ / 50; /* Add .02 seconds of slop */ - - if (quot) { - info->MCR |= UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - } else { - info->MCR &= ~UART_MCR_DTR; - outb(info->MCR, info->ioaddr + UART_MCR); - return 0; - } - - cval = inb(info->ioaddr + UART_LCR); - - outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ - - outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ - outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ - outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ - -#ifdef BOTHER - if (C_BAUD(tty) == BOTHER) { - quot = info->baud_base % newspd; - quot *= 8; - if (quot % newspd > newspd / 2) { - quot /= newspd; - quot++; - } else - quot /= newspd; - - mxser_set_must_enum_value(info->ioaddr, quot); - } else -#endif - mxser_set_must_enum_value(info->ioaddr, 0); - - return 0; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static int mxser_change_speed(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct mxser_port *info = tty->driver_data; - unsigned cflag, cval, fcr; - int ret = 0; - unsigned char status; - - cflag = tty->termios->c_cflag; - if (!info->ioaddr) - return ret; - - if (mxser_set_baud_method[tty->index] == 0) - mxser_set_baud(tty, tty_get_baud_rate(tty)); - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - case CS8: - cval = 0x03; - break; - default: - cval = 0x00; - break; /* too keep GCC shut... */ - } - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; - - if ((info->type == PORT_8250) || (info->type == PORT_16450)) { - if (info->board->chip_flag) { - fcr = UART_FCR_ENABLE_FIFO; - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - mxser_set_must_fifo_value(info); - } else - fcr = 0; - } else { - fcr = UART_FCR_ENABLE_FIFO; - if (info->board->chip_flag) { - fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; - mxser_set_must_fifo_value(info); - } else { - switch (info->rx_trigger) { - case 1: - fcr |= UART_FCR_TRIGGER_1; - break; - case 4: - fcr |= UART_FCR_TRIGGER_4; - break; - case 8: - fcr |= UART_FCR_TRIGGER_8; - break; - default: - fcr |= UART_FCR_TRIGGER_14; - break; - } - } - } - - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - info->MCR &= ~UART_MCR_AFE; - if (cflag & CRTSCTS) { - info->port.flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - if ((info->type == PORT_16550A) || (info->board->chip_flag)) { - info->MCR |= UART_MCR_AFE; - } else { - status = inb(info->ioaddr + UART_MSR); - if (tty->hw_stopped) { - if (status & UART_MSR_CTS) { - tty->hw_stopped = 0; - if (info->type != PORT_16550A && - !info->board->chip_flag) { - outb(info->IER & ~UART_IER_THRI, - info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - tty_wakeup(tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - tty->hw_stopped = 1; - if ((info->type != PORT_16550A) && - (!info->board->chip_flag)) { - info->IER &= ~UART_IER_THRI; - outb(info->IER, info->ioaddr + - UART_IER); - } - } - } - } - } else { - info->port.flags &= ~ASYNC_CTS_FLOW; - } - outb(info->MCR, info->ioaddr + UART_MCR); - if (cflag & CLOCAL) { - info->port.flags &= ~ASYNC_CHECK_CD; - } else { - info->port.flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - outb(info->IER, info->ioaddr + UART_IER); - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; - - if (I_IGNBRK(tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(tty)) { - info->ignore_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - info->read_status_mask |= - UART_LSR_OE | - UART_LSR_PE | - UART_LSR_FE; - } - } - if (info->board->chip_flag) { - mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); - mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); - if (I_IXON(tty)) { - mxser_enable_must_rx_software_flow_control( - info->ioaddr); - } else { - mxser_disable_must_rx_software_flow_control( - info->ioaddr); - } - if (I_IXOFF(tty)) { - mxser_enable_must_tx_software_flow_control( - info->ioaddr); - } else { - mxser_disable_must_tx_software_flow_control( - info->ioaddr); - } - } - - - outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ - outb(cval, info->ioaddr + UART_LCR); - - return ret; -} - -static void mxser_check_modem_status(struct tty_struct *tty, - struct mxser_port *port, int status) -{ - /* update input line counters */ - if (status & UART_MSR_TERI) - port->icount.rng++; - if (status & UART_MSR_DDSR) - port->icount.dsr++; - if (status & UART_MSR_DDCD) - port->icount.dcd++; - if (status & UART_MSR_DCTS) - port->icount.cts++; - port->mon_data.modem_status = status; - wake_up_interruptible(&port->port.delta_msr_wait); - - if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { - if (status & UART_MSR_DCD) - wake_up_interruptible(&port->port.open_wait); - } - - if (port->port.flags & ASYNC_CTS_FLOW) { - if (tty->hw_stopped) { - if (status & UART_MSR_CTS) { - tty->hw_stopped = 0; - - if ((port->type != PORT_16550A) && - (!port->board->chip_flag)) { - outb(port->IER & ~UART_IER_THRI, - port->ioaddr + UART_IER); - port->IER |= UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - tty_wakeup(tty); - } - } else { - if (!(status & UART_MSR_CTS)) { - tty->hw_stopped = 1; - if (port->type != PORT_16550A && - !port->board->chip_flag) { - port->IER &= ~UART_IER_THRI; - outb(port->IER, port->ioaddr + - UART_IER); - } - } - } - } -} - -static int mxser_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long page; - unsigned long flags; - - page = __get_free_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - spin_lock_irqsave(&info->slock, flags); - - if (!info->ioaddr || !info->type) { - set_bit(TTY_IO_ERROR, &tty->flags); - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - info->port.xmit_buf = (unsigned char *) page; - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in mxser_change_speed()) - */ - if (info->board->chip_flag) - outb((UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); - else - outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - - /* - * At this point there's no way the LSR could still be 0xFF; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (inb(info->ioaddr + UART_LSR) == 0xff) { - spin_unlock_irqrestore(&info->slock, flags); - if (capable(CAP_SYS_ADMIN)) { - set_bit(TTY_IO_ERROR, &tty->flags); - return 0; - } else - return -ENODEV; - } - - /* - * Clear the interrupt registers. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - /* - * Now, initialize the UART - */ - outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ - info->MCR = UART_MCR_DTR | UART_MCR_RTS; - outb(info->MCR, info->ioaddr + UART_MCR); - - /* - * Finally, enable interrupts - */ - info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - - if (info->board->chip_flag) - info->IER |= MOXA_MUST_IER_EGDAI; - outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ - - /* - * And clear the interrupt registers again for luck. - */ - (void) inb(info->ioaddr + UART_LSR); - (void) inb(info->ioaddr + UART_RX); - (void) inb(info->ioaddr + UART_IIR); - (void) inb(info->ioaddr + UART_MSR); - - clear_bit(TTY_IO_ERROR, &tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - mxser_change_speed(tty, NULL); - spin_unlock_irqrestore(&info->slock, flags); - - return 0; -} - -/* - * This routine will shutdown a serial port - */ -static void mxser_shutdown_port(struct tty_port *port) -{ - struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long flags; - - spin_lock_irqsave(&info->slock, flags); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->port.delta_msr_wait); - - /* - * Free the xmit buffer, if necessary - */ - if (info->port.xmit_buf) { - free_page((unsigned long) info->port.xmit_buf); - info->port.xmit_buf = NULL; - } - - info->IER = 0; - outb(0x00, info->ioaddr + UART_IER); - - /* clear Rx/Tx FIFO's */ - if (info->board->chip_flag) - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | - MOXA_MUST_FCR_GDA_MODE_ENABLE, - info->ioaddr + UART_FCR); - else - outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - info->ioaddr + UART_FCR); - - /* read data port to reset things */ - (void) inb(info->ioaddr + UART_RX); - - - if (info->board->chip_flag) - SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); - - spin_unlock_irqrestore(&info->slock, flags); -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int mxser_open(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info; - int line; - - line = tty->index; - if (line == MXSER_PORTS) - return 0; - if (line < 0 || line > MXSER_PORTS) - return -ENODEV; - info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; - if (!info->ioaddr) - return -ENODEV; - - tty->driver_data = info; - return tty_port_open(&info->port, tty, filp); -} - -static void mxser_flush_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - char fcr; - unsigned long flags; - - - spin_lock_irqsave(&info->slock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - fcr = inb(info->ioaddr + UART_FCR); - outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), - info->ioaddr + UART_FCR); - outb(fcr, info->ioaddr + UART_FCR); - - spin_unlock_irqrestore(&info->slock, flags); - - tty_wakeup(tty); -} - - -static void mxser_close_port(struct tty_port *port) -{ - struct mxser_port *info = container_of(port, struct mxser_port, port); - unsigned long timeout; - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->IER &= ~UART_IER_RLSI; - if (info->board->chip_flag) - info->IER &= ~MOXA_MUST_RECV_ISR; - - outb(info->IER, info->ioaddr + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } -} - -/* - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - */ -static void mxser_close(struct tty_struct *tty, struct file *filp) -{ - struct mxser_port *info = tty->driver_data; - struct tty_port *port = &info->port; - - if (tty->index == MXSER_PORTS || info == NULL) - return; - if (tty_port_close_start(port, tty, filp) == 0) - return; - mutex_lock(&port->mutex); - mxser_close_port(port); - mxser_flush_buffer(tty); - mxser_shutdown_port(port); - clear_bit(ASYNCB_INITIALIZED, &port->flags); - mutex_unlock(&port->mutex); - /* Right now the tty_port set is done outside of the close_end helper - as we don't yet have everyone using refcounts */ - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); -} - -static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - int c, total = 0; - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->port.xmit_buf) - return 0; - - while (1) { - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - - memcpy(info->port.xmit_buf + info->xmit_head, buf, c); - spin_lock_irqsave(&info->slock, flags); - info->xmit_head = (info->xmit_head + c) & - (SERIAL_XMIT_SIZE - 1); - info->xmit_cnt += c; - spin_unlock_irqrestore(&info->slock, flags); - - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - (info->board->chip_flag)) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + - UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return total; -} - -static int mxser_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (!info->port.xmit_buf) - return 0; - - if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) - return 0; - - spin_lock_irqsave(&info->slock, flags); - info->port.xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= SERIAL_XMIT_SIZE - 1; - info->xmit_cnt++; - spin_unlock_irqrestore(&info->slock, flags); - if (!tty->stopped) { - if (!tty->hw_stopped || - (info->type == PORT_16550A) || - info->board->chip_flag) { - spin_lock_irqsave(&info->slock, flags); - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - spin_unlock_irqrestore(&info->slock, flags); - } - } - return 1; -} - - -static void mxser_flush_chars(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - unsigned long flags; - - if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || - (tty->hw_stopped && info->type != PORT_16550A && - !info->board->chip_flag)) - return; - - spin_lock_irqsave(&info->slock, flags); - - outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); - info->IER |= UART_IER_THRI; - outb(info->IER, info->ioaddr + UART_IER); - - spin_unlock_irqrestore(&info->slock, flags); -} - -static int mxser_write_room(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - int ret; - - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - return ret < 0 ? 0 : ret; -} - -static int mxser_chars_in_buffer(struct tty_struct *tty) -{ - struct mxser_port *info = tty->driver_data; - return info->xmit_cnt; -} - -/*</ |