diff options
Diffstat (limited to 'drivers/char/ftape/lowlevel/ftape-ctl.c')
| -rw-r--r-- | drivers/char/ftape/lowlevel/ftape-ctl.c | 896 |
1 files changed, 0 insertions, 896 deletions
diff --git a/drivers/char/ftape/lowlevel/ftape-ctl.c b/drivers/char/ftape/lowlevel/ftape-ctl.c deleted file mode 100644 index 5d7c1ce92d5..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-ctl.c +++ /dev/null @@ -1,896 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.c,v $ - * $Revision: 1.4 $ - * $Date: 1997/11/11 14:37:44 $ - * - * This file contains the non-read/write ftape functions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - */ - -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/mman.h> - -#include <linux/ftape.h> -#include <linux/qic117.h> -#include <asm/uaccess.h> -#include <asm/io.h> - -/* ease porting between pre-2.4.x and later kernels */ -#define vma_get_pgoff(v) ((v)->vm_pgoff) - -#include "../lowlevel/ftape-tracing.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/ftape-bsm.h" - -/* Global vars. - */ -ftape_info ftape_status = { -/* vendor information */ - { 0, }, /* drive type */ -/* data rates */ - 500, /* used data rate */ - 500, /* drive max rate */ - 500, /* fdc max rate */ -/* drive selection, either FTAPE_SEL_A/B/C/D */ - -1, /* drive selection */ -/* flags set after decode the drive and tape status */ - 0, /* formatted */ - 1, /* no tape */ - 1, /* write protected */ - 1, /* new tape */ -/* values of last queried drive/tape status and error */ - {{0,}}, /* last error code */ - {{0,}}, /* drive status, configuration, tape status */ -/* cartridge geometry */ - 20, /* tracks_per_tape */ - 102, /* segments_per_track */ -/* location of header segments, etc. */ - -1, /* used_header_segment */ - -1, /* header_segment_1 */ - -1, /* header_segment_2 */ - -1, /* first_data_segment */ - -1, /* last_data_segment */ -/* the format code as stored in the header segment */ - fmt_normal, /* format code */ -/* the default for the qic std: unknown */ - -1, -/* is tape running? */ - idle, /* runner_state */ -/* is tape reading/writing/verifying/formatting/deleting */ - idle, /* driver state */ -/* flags fatal hardware error */ - 1, /* failure */ -/* history record */ - { 0, } /* history record */ -}; - -int ftape_segments_per_head = 1020; -int ftape_segments_per_cylinder = 4; -int ftape_init_drive_needed = 1; /* need to be global for ftape_reset_drive() - * in ftape-io.c - */ - -/* Local vars. - */ -static const vendor_struct vendors[] = QIC117_VENDORS; -static const wakeup_method methods[] = WAKEUP_METHODS; - -const ftape_info *ftape_get_status(void) -{ -#if defined(STATUS_PARANOYA) - static ftape_info get_status; - - get_status = ftape_status; - return &get_status; -#else - return &ftape_status; /* maybe return only a copy of it to assure - * read only access - */ -#endif -} - -static int ftape_not_operational(int status) -{ - /* return true if status indicates tape can not be used. - */ - return ((status ^ QIC_STATUS_CARTRIDGE_PRESENT) & - (QIC_STATUS_ERROR | - QIC_STATUS_CARTRIDGE_PRESENT | - QIC_STATUS_NEW_CARTRIDGE)); -} - -int ftape_seek_to_eot(void) -{ - int status; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); - while ((status & QIC_STATUS_AT_EOT) == 0) { - if (ftape_not_operational(status)) { - TRACE_EXIT -EIO; - } - TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_FORWARD, - ftape_timeout.rewind,&status),); - } - TRACE_EXIT 0; -} - -int ftape_seek_to_bot(void) -{ - int status; - TRACE_FUN(ft_t_any); - - TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); - while ((status & QIC_STATUS_AT_BOT) == 0) { - if (ftape_not_operational(status)) { - TRACE_EXIT -EIO; - } - TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_REVERSE, - ftape_timeout.rewind,&status),); - } - TRACE_EXIT 0; -} - -static int ftape_new_cartridge(void) -{ - ft_location.track = -1; /* force seek on first access */ - ftape_zap_read_buffers(); - ftape_zap_write_buffers(); - return 0; -} - -int ftape_abort_operation(void) -{ - int result = 0; - int status; - TRACE_FUN(ft_t_flow); - - if (ft_runner_status == running) { - TRACE(ft_t_noise, "aborting runner, waiting"); - - ft_runner_status = do_abort; - /* set timeout so that the tape will run to logical EOT - * if we missed the last sector and there are no queue pulses. - */ - result = ftape_dumb_stop(); - } - if (ft_runner_status != idle) { - if (ft_runner_status == do_abort) { - TRACE(ft_t_noise, "forcing runner abort"); - } - TRACE(ft_t_noise, "stopping tape"); - result = ftape_stop_tape(&status); - ft_location.known = 0; - ft_runner_status = idle; - } - ftape_reset_buffer(); - ftape_zap_read_buffers(); - ftape_set_state(idle); - TRACE_EXIT result; -} - -static int lookup_vendor_id(unsigned int vendor_id) -{ - int i = 0; - - while (vendors[i].vendor_id != vendor_id) { - if (++i >= NR_ITEMS(vendors)) { - return -1; - } - } - return i; -} - -static void ftape_detach_drive(void) -{ - TRACE_FUN(ft_t_any); - - TRACE(ft_t_flow, "disabling tape drive and fdc"); - ftape_put_drive_to_sleep(ft_drive_type.wake_up); - fdc_catch_stray_interrupts(1); /* one always comes */ - fdc_disable(); - fdc_release_irq_and_dma(); - fdc_release_regions(); - TRACE_EXIT; -} - -static void clear_history(void) -{ - ft_history.used = 0; - ft_history.id_am_errors = - ft_history.id_crc_errors = - ft_history.data_am_errors = - ft_history.data_crc_errors = - ft_history.overrun_errors = - ft_history.no_data_errors = - ft_history.retries = - ft_history.crc_errors = - ft_history.crc_failures = - ft_history.ecc_failures = - ft_history.corrected = - ft_history.defects = - ft_history.rewinds = 0; -} - -static int ftape_activate_drive(vendor_struct * drive_type) -{ - int result = 0; - TRACE_FUN(ft_t_flow); - - /* If we already know the drive type, wake it up. - * Else try to find out what kind of drive is attached. - */ - if (drive_type->wake_up != unknown_wake_up) { - TRACE(ft_t_flow, "enabling tape drive and fdc"); - result = ftape_wakeup_drive(drive_type->wake_up); - if (result < 0) { - TRACE(ft_t_err, "known wakeup method failed"); - } - } else { - wake_up_types method; - const ft_trace_t old_tracing = TRACE_LEVEL; - if (TRACE_LEVEL < ft_t_flow) { - SET_TRACE_LEVEL(ft_t_bug); - } - - /* Try to awaken the drive using all known methods. - * Lower tracing for a while. - */ - for (method=no_wake_up; method < NR_ITEMS(methods); ++method) { - drive_type->wake_up = method; -#ifdef CONFIG_FT_TWO_DRIVES - /* Test setup for dual drive configuration. - * /dev/rft2 uses mountain wakeup - * /dev/rft3 uses colorado wakeup - * Other systems will use the normal scheme. - */ - if ((ft_drive_sel < 2) || - (ft_drive_sel == 2 && method == FT_WAKE_UP_1) || - (ft_drive_sel == 3 && method == FT_WAKE_UP_2)) { - result=ftape_wakeup_drive(drive_type->wake_up); - } else { - result = -EIO; - } -#else - result = ftape_wakeup_drive(drive_type->wake_up); -#endif - if (result >= 0) { - TRACE(ft_t_warn, "drive wakeup method: %s", - methods[drive_type->wake_up].name); - break; - } - } - SET_TRACE_LEVEL(old_tracing); - - if (method >= NR_ITEMS(methods)) { - /* no response at all, cannot open this drive */ - drive_type->wake_up = unknown_wake_up; - TRACE(ft_t_err, "no tape drive found !"); - result = -ENODEV; - } - } - TRACE_EXIT result; -} - -static int ftape_get_drive_status(void) -{ - int result; - int status; - TRACE_FUN(ft_t_flow); - - ft_no_tape = ft_write_protected = 0; - /* Tape drive is activated now. - * First clear error status if present. - */ - do { - result = ftape_ready_wait(ftape_timeout.reset, &status); - if (result < 0) { - if (result == -ETIME) { - TRACE(ft_t_err, "ftape_ready_wait timeout"); - } else if (result == -EINTR) { - TRACE(ft_t_err, "ftape_ready_wait aborted"); - } else { - TRACE(ft_t_err, "ftape_ready_wait failed"); - } - TRACE_EXIT -EIO; - } - /* Clear error condition (drive is ready !) - */ - if (status & QIC_STATUS_ERROR) { - unsigned int error; - qic117_cmd_t command; - - TRACE(ft_t_err, "error status set"); - result = ftape_report_error(&error, &command, 1); - if (result < 0) { - TRACE(ft_t_err, - "report_error_code failed: %d", result); - /* hope it's working next time */ - ftape_reset_drive(); - TRACE_EXIT -EIO; - } else if (error != 0) { - TRACE(ft_t_noise, "error code : %d", error); - TRACE(ft_t_noise, "error command: %d", command); - } - } - if (status & QIC_STATUS_NEW_CARTRIDGE) { - unsigned int error; - qic117_cmd_t command; - const ft_trace_t old_tracing = TRACE_LEVEL; - SET_TRACE_LEVEL(ft_t_bug); - - /* Undocumented feature: Must clear (not present!) - * error here or we'll fail later. - */ - ftape_report_error(&error, &command, 1); - - SET_TRACE_LEVEL(old_tracing); - TRACE(ft_t_info, "status: new cartridge"); - ft_new_tape = 1; - } else { - ft_new_tape = 0; - } - FT_SIGNAL_EXIT(_DONT_BLOCK); - } while (status & QIC_STATUS_ERROR); - - ft_no_tape = !(status & QIC_STATUS_CARTRIDGE_PRESENT); - ft_write_protected = (status & QIC_STATUS_WRITE_PROTECT) != 0; - if (ft_no_tape) { - TRACE(ft_t_warn, "no cartridge present"); - } else { - if (ft_write_protected) { - TRACE(ft_t_noise, "Write protected cartridge"); - } - } - TRACE_EXIT 0; -} - -static void ftape_log_vendor_id(void) -{ - int vendor_index; - TRACE_FUN(ft_t_flow); - - ftape_report_vendor_id(&ft_drive_type.vendor_id); - vendor_index = lookup_vendor_id(ft_drive_type.vendor_id); - if (ft_drive_type.vendor_id == UNKNOWN_VENDOR && - ft_drive_type.wake_up == wake_up_colorado) { - vendor_index = 0; - /* hack to get rid of all this mail */ - ft_drive_type.vendor_id = 0; - } - if (vendor_index < 0) { - /* Unknown vendor id, first time opening device. The - * drive_type remains set to type found at wakeup - * time, this will probably keep the driver operating - * for this new vendor. - */ - TRACE(ft_t_warn, "\n" - KERN_INFO "============ unknown vendor id ===========\n" - KERN_INFO "A new, yet unsupported tape drive is found\n" - KERN_INFO "Please report the following values:\n" - KERN_INFO " Vendor id : 0x%04x\n" - KERN_INFO " Wakeup method : %s\n" - KERN_INFO "And a description of your tape drive\n" - KERN_INFO "to "THE_FTAPE_MAINTAINER"\n" - KERN_INFO "==========================================", - ft_drive_type.vendor_id, - methods[ft_drive_type.wake_up].name); - ft_drive_type.speed = 0; /* unknown */ - } else { - ft_drive_type.name = vendors[vendor_index].name; - ft_drive_type.speed = vendors[vendor_index].speed; - TRACE(ft_t_info, "tape drive type: %s", ft_drive_type.name); - /* scan all methods for this vendor_id in table */ - while(ft_drive_type.wake_up != vendors[vendor_index].wake_up) { - if (vendor_index < NR_ITEMS(vendors) - 1 && - vendors[vendor_index + 1].vendor_id - == - ft_drive_type.vendor_id) { - ++vendor_index; - } else { - break; - } - } - if (ft_drive_type.wake_up != vendors[vendor_index].wake_up) { - TRACE(ft_t_warn, "\n" - KERN_INFO "==========================================\n" - KERN_INFO "wakeup type mismatch:\n" - KERN_INFO "found: %s, expected: %s\n" - KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n" - KERN_INFO "==========================================", - methods[ft_drive_type.wake_up].name, - methods[vendors[vendor_index].wake_up].name); - } - } - TRACE_EXIT; -} - -void ftape_calc_timeouts(unsigned int qic_std, - unsigned int data_rate, - unsigned int tape_len) -{ - int speed; /* deci-ips ! */ - int ff_speed; - int length; - TRACE_FUN(ft_t_any); - - /* tape transport speed - * data rate: QIC-40 QIC-80 QIC-3010 QIC-3020 - * - * 250 Kbps 25 ips n/a n/a n/a - * 500 Kbps 50 ips 34 ips 22.6 ips n/a - * 1 Mbps n/a 68 ips 45.2 ips 22.6 ips - * 2 Mbps n/a n/a n/a 45.2 ips - * - * fast tape transport speed is at least 68 ips. - */ - switch (qic_std) { - case QIC_TAPE_QIC40: - speed = (data_rate == 250) ? 250 : 500; - break; - case QIC_TAPE_QIC80: - speed = (data_rate == 500) ? 340 : 680; - break; - case QIC_TAPE_QIC3010: - speed = (data_rate == 500) ? 226 : 452; - break; - case QIC_TAPE_QIC3020: - speed = (data_rate == 1000) ? 226 : 452; - break; - default: - TRACE(ft_t_bug, "Unknown qic_std (bug) ?"); - speed = 500; - break; - } - if (ft_drive_type.speed == 0) { - unsigned long t0; - static int dt = 0; /* keep gcc from complaining */ - static int first_time = 1; - - /* Measure the time it takes to wind to EOT and back to BOT. - * If the tape length is known, calculate the rewind speed. - * Else keep the time value for calculation of the rewind - * speed later on, when the length _is_ known. - * Ask for a report only when length and speed are both known. - */ - if (first_time) { - ftape_seek_to_bot(); - t0 = jiffies; - ftape_seek_to_eot(); - ftape_seek_to_bot(); - dt = (int) (((jiffies - t0) * FT_USPT) / 1000); - if (dt < 1) { - dt = 1; /* prevent div by zero on failures */ - } - first_time = 0; - TRACE(ft_t_info, - "trying to determine seek timeout, got %d msec", - dt); - } - if (tape_len != 0) { - ft_drive_type.speed = - (2 * 12 * tape_len * 1000) / dt; - TRACE(ft_t_warn, "\n" - KERN_INFO "==========================================\n" - KERN_INFO "drive type: %s\n" - KERN_INFO "delta time = %d ms, length = %d ft\n" - KERN_INFO "has a maximum tape speed of %d ips\n" - KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n" - KERN_INFO "==========================================", - ft_drive_type.name, dt, tape_len, - ft_drive_type.speed); - } - } - /* Handle unknown length tapes as very long ones. We'll - * determine the actual length from a header segment later. - * This is normal for all modern (Wide,TR1/2/3) formats. - */ - if (tape_len <= 0) { - TRACE(ft_t_noise, - "Unknown tape length, using maximal timeouts"); - length = QIC_TOP_TAPE_LEN; /* use worst case values */ - } else { - length = tape_len; /* use actual values */ - } - if (ft_drive_type.speed == 0) { - ff_speed = speed; - } else { - ff_speed = ft_drive_type.speed; - } - /* time to go from bot to eot at normal speed (data rate): - * time = (1+delta) * length (ft) * 12 (inch/ft) / speed (ips) - * delta = 10 % for seek speed, 20 % for rewind speed. - */ - ftape_timeout.seek = (length * 132 * FT_SECOND) / speed; - ftape_timeout.rewind = (length * 144 * FT_SECOND) / (10 * ff_speed); - ftape_timeout.reset = 20 * FT_SECOND + ftape_timeout.rewind; - TRACE(ft_t_noise, "timeouts for speed = %d, length = %d\n" - KERN_INFO "seek timeout : %d sec\n" - KERN_INFO "rewind timeout: %d sec\n" - KERN_INFO "reset timeout : %d sec", - speed, length, - (ftape_timeout.seek + 500) / 1000, - (ftape_timeout.rewind + 500) / 1000, - (ftape_timeout.reset + 500) / 1000); - TRACE_EXIT; -} - -/* This function calibrates the datarate (i.e. determines the maximal - * usable data rate) and sets the global variable ft_qic_std to qic_std - * - */ -int ftape_calibrate_data_rate(unsigned int qic_std) -{ - int rate = ft_fdc_rate_limit; - int result; - TRACE_FUN(ft_t_flow); - - ft_qic_std = qic_std; - - if (ft_qic_std == -1) { - TRACE_ABORT(-EIO, ft_t_err, - "Unable to determine data rate if QIC standard is unknown"); - } - - /* Select highest rate supported by both fdc and drive. - * Start with highest rate supported by the fdc. - */ - while (fdc_set_data_rate(rate) < 0 && rate > 250) { - rate /= 2; - } - TRACE(ft_t_info, - "Highest FDC supported data rate: %d Kbps", rate); - ft_fdc_max_rate = rate; - do { - result = ftape_set_data_rate(rate, ft_qic_std); - } while (result == -EINVAL && (rate /= 2) > 250); - if (result < 0) { - TRACE_ABORT(-EIO, ft_t_err, "set datarate failed"); - } - ft_data_rate = rate; - TRACE_EXIT 0; -} - -static int ftape_init_drive(void) -{ - int status; - qic_model model; - unsigned int qic_std; - unsigned int data_rate; - TRACE_FUN(ft_t_flow); - - ftape_init_drive_needed = 0; /* don't retry if this fails ? */ - TRACE_CATCH(ftape_report_raw_drive_status(&status),); - if (status & QIC_STATUS_CARTRIDGE_PRESENT) { - if (!(status & QIC_STATUS_AT_BOT)) { - /* Antique drives will get here after a soft reset, - * modern ones only if the driver is loaded when the - * tape wasn't rewound properly. - */ - /* Tape should be at bot if new cartridge ! */ - ftape_seek_to_bot(); - } - if (!(status & QIC_STATUS_REFERENCED)) { - TRACE(ft_t_flow, "starting seek_load_point"); - TRACE_CATCH(ftape_command_wait(QIC_SEEK_LOAD_POINT, - ftape_timeout.reset, - &status),); - } - } - ft_formatted = (status & QIC_STATUS_REFERENCED) != 0; - if (!ft_formatted) { - TRACE(ft_t_warn, "Warning: tape is not formatted !"); - } - - /* report configuration aborts when ftape_tape_len == -1 - * unknown qic_std is okay if not formatted. - */ - TRACE_CATCH(ftape_report_configuration(&model, - &data_rate, - &qic_std, - &ftape_tape_len),); - - /* Maybe add the following to the /proc entry - */ - TRACE(ft_t_info, "%s drive @ %d Kbps", - (model == prehistoric) ? "prehistoric" : - ((model == pre_qic117c) ? "pre QIC-117C" : - ((model == post_qic117b) ? "post QIC-117B" : - "post QIC-117D")), data_rate); - - if (ft_formatted) { - /* initialize ft_used_data_rate to maximum value - * and set ft_qic_std - */ - TRACE_CATCH(ftape_calibrate_data_rate(qic_std),); - if (ftape_tape_len == 0) { - TRACE(ft_t_info, "unknown length QIC-%s tape", - (ft_qic_std == QIC_TAPE_QIC40) ? "40" : - ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : - ((ft_qic_std == QIC_TAPE_QIC3010) - ? "3010" : "3020"))); - } else { - TRACE(ft_t_info, "%d ft. QIC-%s tape", ftape_tape_len, - (ft_qic_std == QIC_TAPE_QIC40) ? "40" : - ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : - ((ft_qic_std == QIC_TAPE_QIC3010) - ? "3010" : "3020"))); - } - ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); - /* soft write-protect QIC-40/QIC-80 cartridges used with a - * Colorado T3000 drive. Buggy hardware! - */ - if ((ft_drive_type.vendor_id == 0x011c6) && - ((ft_qic_std == QIC_TAPE_QIC40 || - ft_qic_std == QIC_TAPE_QIC80) && - !ft_write_protected)) { - TRACE(ft_t_warn, "\n" - KERN_INFO "The famous Colorado T3000 bug:\n" - KERN_INFO "%s drives can't write QIC40 and QIC80\n" - KERN_INFO "cartridges but don't set the write-protect flag!", - ft_drive_type.name); - ft_write_protected = 1; - } - } else { - /* Doesn't make too much sense to set the data rate - * because we don't know what to use for the write - * precompensation. - * Need to do this again when formatting the cartridge. - */ - ft_data_rate = data_rate; - ftape_calc_timeouts(QIC_TAPE_QIC40, - data_rate, - ftape_tape_len); - } - ftape_new_cartridge(); - TRACE_EXIT 0; -} - -static void ftape_munmap(void) -{ - int i; - TRACE_FUN(ft_t_flow); - - for (i = 0; i < ft_nr_buffers; i++) { - ft_buffer[i]->mmapped = 0; - } - TRACE_EXIT; -} - -/* Map the dma buffers into the virtual address range given by vma. - * We only check the caller doesn't map non-existent buffers. We - * don't check for multiple mappings. - */ -int ftape_mmap(struct vm_area_struct *vma) -{ - int num_buffers; - int i; - TRACE_FUN(ft_t_flow); - - if (ft_failure) { - TRACE_EXIT -ENODEV; - } - if (!(vma->vm_flags & (VM_READ|VM_WRITE))) { - TRACE_ABORT(-EINVAL, ft_t_err, "Undefined mmap() access"); - } - if (vma_get_pgoff(vma) != 0) { - TRACE_ABORT(-EINVAL, ft_t_err, "page offset must be 0"); - } - if ((vma->vm_end - vma->vm_start) % FT_BUFF_SIZE != 0) { - TRACE_ABORT(-EINVAL, ft_t_err, - "size = %ld, should be a multiple of %d", - vma->vm_end - vma->vm_start, - FT_BUFF_SIZE); - } - num_buffers = (vma->vm_end - vma->vm_start) / FT_BUFF_SIZE; - if (num_buffers > ft_nr_buffers) { - TRACE_ABORT(-EINVAL, - ft_t_err, "size = %ld, should be less than %d", - vma->vm_end - vma->vm_start, - ft_nr_buffers * FT_BUFF_SIZE); - } - if (ft_driver_state != idle) { - /* this also clears the buffer states - */ - ftape_abort_operation(); - } else { - ftape_reset_buffer(); - } - for (i = 0; i < num_buffers; i++) { - unsigned long pfn; - - pfn = virt_to_phys(ft_buffer[i]->address) >> PAGE_SHIFT; - TRACE_CATCH(remap_pfn_range(vma, vma->vm_start + - i * FT_BUFF_SIZE, - pfn, - FT_BUFF_SIZE, - vma->vm_page_prot), - _res = -EAGAIN); - TRACE(ft_t_noise, "remapped dma buffer @ %p to location @ %p", - ft_buffer[i]->address, - (void *)(vma->vm_start + i * FT_BUFF_SIZE)); - } - for (i = 0; i < num_buffers; i++) { - memset(ft_buffer[i]->address, 0xAA, FT_BUFF_SIZE); - ft_buffer[i]->mmapped++; - } - TRACE_EXIT 0; -} - -static void ftape_init_driver(void); /* forward declaration */ - -/* OPEN routine called by kernel-interface code - */ -int ftape_enable(int drive_selection) -{ - TRACE_FUN(ft_t_any); - - if (ft_drive_sel == -1 || ft_drive_sel != drive_selection) { - /* Other selection than last time - */ - ftape_init_driver(); - } - ft_drive_sel = FTAPE_SEL(drive_selection); - ft_failure = 0; - TRACE_CATCH(fdc_init(),); /* init & detect fdc */ - TRACE_CATCH(ftape_activate_drive(&ft_drive_type), - fdc_disable(); - fdc_release_irq_and_dma(); - fdc_release_regions()); - TRACE_CATCH(ftape_get_drive_status(), ftape_detach_drive()); - if (ft_drive_type.vendor_id == UNKNOWN_VENDOR) { - ftape_log_vendor_id(); - } - if (ft_new_tape) { - ftape_init_drive_needed = 1; - } - if (!ft_no_tape && ftape_init_drive_needed) { - TRACE_CATCH(ftape_init_drive(), ftape_detach_drive()); - } - ftape_munmap(); /* clear the mmap flag */ - clear_history(); - TRACE_EXIT 0; -} - -/* release routine called by the high level interface modules - * zftape or sftape. - */ -void ftape_disable(void) -{ - int i; - TRACE_FUN(ft_t_any); - - for (i = 0; i < ft_nr_buffers; i++) { - if (ft_buffer[i]->mmapped) { - TRACE(ft_t_noise, "first byte of buffer %d: 0x%02x", - i, *ft_buffer[i]->address); - } - } - if (sigtestsetmask(¤t->pending.signal, _DONT_BLOCK) && - !(sigtestsetmask(¤t->pending.signal, _NEVER_BLOCK)) && - ftape_tape_running) { - TRACE(ft_t_warn, - "Interrupted by fatal signal and tape still running"); - ftape_dumb_stop(); - ftape_abort_operation(); /* it's annoying */ - } else { - ftape_set_state(idle); - } - ftape_detach_drive(); - if (ft_history.used) { - TRACE(ft_t_info, "== Non-fatal errors this run: =="); - TRACE(ft_t_info, "fdc isr statistics:\n" - KERN_INFO " id_am_errors : %3d\n" - KERN_INFO " id_crc_errors : %3d\n" - KERN_INFO " data_am_errors : %3d\n" - KERN_INFO " data_crc_errors : %3d\n" - KERN_INFO " overrun_errors : %3d\n" - KERN_INFO " no_data_errors : %3d\n" - KERN_INFO " retries : %3d", - ft_history.id_am_errors, ft_history.id_crc_errors, - ft_history.data_am_errors, ft_history.data_crc_errors, - ft_history.overrun_errors, ft_history.no_data_errors, - ft_history.retries); - if (ft_history.used & 1) { - TRACE(ft_t_info, "ecc statistics:\n" - KERN_INFO " crc_errors : %3d\n" - KERN_INFO " crc_failures : %3d\n" - KERN_INFO " ecc_failures : %3d\n" - KERN_INFO " sectors corrected: %3d", - ft_history.crc_errors, ft_history.crc_failures, - ft_history.ecc_failures, ft_history.corrected); - } - if (ft_history.defects > 0) { - TRACE(ft_t_warn, "Warning: %d media defects!", - ft_history.defects); - } - if (ft_history.rewinds > 0) { - TRACE(ft_t_info, "tape motion statistics:\n" - KERN_INFO "repositions : %3d", - ft_history.rewinds); - } - } - ft_failure = 1; - TRACE_EXIT; -} - -static void ftape_init_driver(void) -{ - TRACE_FUN(ft_t_flow); - - ft_drive_type.vendor_id = UNKNOWN_VENDOR; - ft_drive_type.speed = 0; - ft_drive_type.wake_up = unknown_wake_up; - ft_drive_type.name = "Unknown"; - - ftape_timeout.seek = 650 * FT_SECOND; - ftape_timeout.reset = 670 * FT_SECOND; - ftape_timeout.rewind = 650 * FT_SECOND; - ftape_timeout.head_seek = 15 * FT_SECOND; - ftape_timeout.stop = 5 * FT_SECOND; - ftape_timeout.pause = 16 * FT_SECOND; - - ft_qic_std = -1; - ftape_tape_len = 0; /* unknown */ - ftape_current_command = 0; - ftape_current_cylinder = -1; - - ft_segments_per_track = 102; - ftape_segments_per_head = 1020; - ftape_segments_per_cylinder = 4; - ft_tracks_per_tape = 20; - - ft_failure = 1; - - ft_formatted = 0; - ft_no_tape = 1; - ft_write_protected = 1; - ft_new_tape = 1; - - ft_driver_state = idle; - - ft_data_rate = - ft_fdc_max_rate = 500; - ft_drive_max_rate = 0; /* triggers set_rate_test() */ - - ftape_init_drive_needed = 1; - - ft_header_segment_1 = -1; - ft_header_segment_2 = -1; - ft_used_header_segment = -1; - ft_first_data_segment = -1; - ft_last_data_segment = -1; - - ft_location.track = -1; - ft_location.known = 0; - - ftape_tape_running = 0; - ftape_might_be_off_track = 1; - - ftape_new_cartridge(); /* init some tape related variables */ - ftape_init_bsm(); - TRACE_EXIT; -} |