diff options
Diffstat (limited to 'drivers/char/cd1865.h')
| -rw-r--r-- | drivers/char/cd1865.h | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/drivers/char/cd1865.h b/drivers/char/cd1865.h new file mode 100644 index 00000000000..9940966e7a1 --- /dev/null +++ b/drivers/char/cd1865.h @@ -0,0 +1,263 @@ +/* + * linux/drivers/char/cd1865.h -- Definitions relating to the CD1865 + * for the Specialix IO8+ multiport serial driver. + * + * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) + * + * Specialix pays for the development and support of this driver. + * Please DO contact io8-linux@specialix.co.uk if you require + * support. + * + * This driver was developped in the BitWizard linux device + * driver service. If you require a linux device driver for your + * product, please contact devices@BitWizard.nl for a quote. + * + */ + +/* + * Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards. + */ + + +/* Values of choice for Interrupt ACKs */ +/* These values are "obligatory" if you use the register based + * interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865 + * databook */ +#define SX_ACK_MINT 0x75 /* goes to PILR1 */ +#define SX_ACK_TINT 0x76 /* goes to PILR2 */ +#define SX_ACK_RINT 0x77 /* goes to PILR3 */ + +/* Chip ID (is used when chips ar daisy chained.) */ +#define SX_ID 0x10 + +/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */ + +#define CD186x_NCH 8 /* Total number of channels */ +#define CD186x_TPC 16 /* Ticks per character */ +#define CD186x_NFIFO 8 /* TX FIFO size */ + + +/* Global registers */ + +#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */ +#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */ +#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */ +#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */ +#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */ +#define CD186x_CAR 0x64 /* Channel Access Register */ +#define CD186x_SRSR 0x65 /* Channel Access Register */ +#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */ +#define CD186x_PPRH 0x70 /* Prescaler Period Register High */ +#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */ +#define CD186x_RDR 0x78 /* Receiver Data Register */ +#define CD186x_RCSR 0x7a /* Receiver Character Status Register */ +#define CD186x_TDR 0x7b /* Transmit Data Register */ +#define CD186x_EOIR 0x7f /* End of Interrupt Register */ +#define CD186x_MRAR 0x75 /* Modem Request Acknowledge register */ +#define CD186x_TRAR 0x76 /* Transmit Request Acknowledge register */ +#define CD186x_RRAR 0x77 /* Receive Request Acknowledge register */ +#define CD186x_SRCR 0x66 /* Service Request Configuration register */ + +/* Channel Registers */ + +#define CD186x_CCR 0x01 /* Channel Command Register */ +#define CD186x_IER 0x02 /* Interrupt Enable Register */ +#define CD186x_COR1 0x03 /* Channel Option Register 1 */ +#define CD186x_COR2 0x04 /* Channel Option Register 2 */ +#define CD186x_COR3 0x05 /* Channel Option Register 3 */ +#define CD186x_CCSR 0x06 /* Channel Control Status Register */ +#define CD186x_RDCR 0x07 /* Receive Data Count Register */ +#define CD186x_SCHR1 0x09 /* Special Character Register 1 */ +#define CD186x_SCHR2 0x0a /* Special Character Register 2 */ +#define CD186x_SCHR3 0x0b /* Special Character Register 3 */ +#define CD186x_SCHR4 0x0c /* Special Character Register 4 */ +#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */ +#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */ +#define CD186x_MCR 0x12 /* Modem Change Register */ +#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */ +#define CD186x_MSVR 0x28 /* Modem Signal Value Register */ +#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */ +#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */ +#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */ +#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */ +#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */ +#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */ + + +/* Global Interrupt Vector Register (R/W) */ + +#define GIVR_ITMASK 0x07 /* Interrupt type mask */ +#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */ +#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */ +#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */ +#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */ + + +/* Global Interrupt Channel Register (R/W) */ + +#define GICR_CHAN 0x1c /* Channel Number Mask */ +#define GICR_CHAN_OFF 2 /* Channel Number shift */ + + +/* Channel Address Register (R/W) */ + +#define CAR_CHAN 0x07 /* Channel Number Mask */ +#define CAR_A7 0x08 /* A7 Address Extension (unused) */ + + +/* Receive Character Status Register (R/O) */ + +#define RCSR_TOUT 0x80 /* Rx Timeout */ +#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ +#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ +#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ +#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ +#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ +#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ +#define RCSR_BREAK 0x08 /* Break has been detected */ +#define RCSR_PE 0x04 /* Parity Error */ +#define RCSR_FE 0x02 /* Frame Error */ +#define RCSR_OE 0x01 /* Overrun Error */ + + +/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ + +#define CCR_HARDRESET 0x81 /* Reset the chip */ + +#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ + +#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ +#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ +#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ + +#define CCR_SSCH1 0x21 /* Send Special Character 1 */ + +#define CCR_SSCH2 0x22 /* Send Special Character 2 */ + +#define CCR_SSCH3 0x23 /* Send Special Character 3 */ + +#define CCR_SSCH4 0x24 /* Send Special Character 4 */ + +#define CCR_TXEN 0x18 /* Enable Transmitter */ +#define CCR_RXEN 0x12 /* Enable Receiver */ + +#define CCR_TXDIS 0x14 /* Disable Transmitter */ +#define CCR_RXDIS 0x11 /* Disable Receiver */ + + +/* Interrupt Enable Register (R/W) */ + +#define IER_DSR 0x80 /* Enable interrupt on DSR change */ +#define IER_CD 0x40 /* Enable interrupt on CD change */ +#define IER_CTS 0x20 /* Enable interrupt on CTS change */ +#define IER_RXD 0x10 /* Enable interrupt on Receive Data */ +#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ +#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ +#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ +#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ + + +/* Channel Option Register 1 (R/W) */ + +#define COR1_ODDP 0x80 /* Odd Parity */ +#define COR1_PARMODE 0x60 /* Parity Mode mask */ +#define COR1_NOPAR 0x00 /* No Parity */ +#define COR1_FORCEPAR 0x20 /* Force Parity */ +#define COR1_NORMPAR 0x40 /* Normal Parity */ +#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ +#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ +#define COR1_1SB 0x00 /* 1 Stop Bit */ +#define COR1_15SB 0x04 /* 1.5 Stop Bits */ +#define COR1_2SB 0x08 /* 2 Stop Bits */ +#define COR1_CHARLEN 0x03 /* Character Length */ +#define COR1_5BITS 0x00 /* 5 bits */ +#define COR1_6BITS 0x01 /* 6 bits */ +#define COR1_7BITS 0x02 /* 7 bits */ +#define COR1_8BITS 0x03 /* 8 bits */ + + +/* Channel Option Register 2 (R/W) */ + +#define COR2_IXM 0x80 /* Implied XON mode */ +#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ +#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ +#define COR2_LLM 0x10 /* Local Loopback Mode */ +#define COR2_RLM 0x08 /* Remote Loopback Mode */ +#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ +#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ +#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ + + +/* Channel Option Register 3 (R/W) */ + +#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ +#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ +#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ +#define COR3_SCDE 0x10 /* Special Character Detection Enable */ +#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ + + +/* Channel Control Status Register (R/O) */ + +#define CCSR_RXEN 0x80 /* Receiver Enabled */ +#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ +#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ +#define CCSR_TXEN 0x08 /* Transmitter Enabled */ +#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ +#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ + + +/* Modem Change Option Register 1 (R/W) */ + +#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ +#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ +#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ +#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ +#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ + + +/* Modem Change Option Register 2 (R/W) */ + +#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ +#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ +#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ + +/* Modem Change Register (R/W) */ + +#define MCR_DSRCHG 0x80 /* DSR Changed */ +#define MCR_CDCHG 0x40 /* CD Changed */ +#define MCR_CTSCHG 0x20 /* CTS Changed */ + + +/* Modem Signal Value Register (R/W) */ + +#define MSVR_DSR 0x80 /* Current state of DSR input */ +#define MSVR_CD 0x40 /* Current state of CD input */ +#define MSVR_CTS 0x20 /* Current state of CTS input */ +#define MSVR_DTR 0x02 /* Current state of DTR output */ +#define MSVR_RTS 0x01 /* Current state of RTS output */ + + +/* Escape characters */ + +#define CD186x_C_ESC 0x00 /* Escape character */ +#define CD186x_C_SBRK 0x81 /* Start sending BREAK */ +#define CD186x_C_DELAY 0x82 /* Delay output */ +#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */ + +#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */ +#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */ +#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */ + + + +#define SRCR_PKGTYPE 0x80 +#define SRCR_REGACKEN 0x40 +#define SRCR_DAISYEN 0x20 +#define SRCR_GLOBPRI 0x10 +#define SRCR_UNFAIR 0x08 +#define SRCR_AUTOPRI 0x02 +#define SRCR_PRISEL 0x01 + + |