diff options
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r-- | drivers/bluetooth/Kconfig | 12 | ||||
-rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
-rw-r--r-- | drivers/bluetooth/bcm203x.c | 3 | ||||
-rw-r--r-- | drivers/bluetooth/bpa10x.c | 2 | ||||
-rw-r--r-- | drivers/bluetooth/btmrvl_debugfs.c | 2 | ||||
-rw-r--r-- | drivers/bluetooth/btmrvl_drv.h | 5 | ||||
-rw-r--r-- | drivers/bluetooth/btmrvl_main.c | 5 | ||||
-rw-r--r-- | drivers/bluetooth/btmrvl_sdio.c | 111 | ||||
-rw-r--r-- | drivers/bluetooth/btusb.c | 13 | ||||
-rw-r--r-- | drivers/bluetooth/dtl1_cs.c | 2 | ||||
-rw-r--r-- | drivers/bluetooth/hci_ath.c | 235 | ||||
-rw-r--r-- | drivers/bluetooth/hci_bcsp.c | 4 | ||||
-rw-r--r-- | drivers/bluetooth/hci_h4.c | 107 | ||||
-rw-r--r-- | drivers/bluetooth/hci_ldisc.c | 20 | ||||
-rw-r--r-- | drivers/bluetooth/hci_ll.c | 6 | ||||
-rw-r--r-- | drivers/bluetooth/hci_uart.h | 15 |
16 files changed, 361 insertions, 182 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 058fbccf2f5..02deef42492 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -58,6 +58,18 @@ config BT_HCIUART_BCSP Say Y here to compile support for HCI BCSP protocol. +config BT_HCIUART_ATH3K + bool "Atheros AR300x serial support" + depends on BT_HCIUART + help + HCIATH3K (HCI Atheros AR300x) is a serial protocol for + communication between host and Atheros AR300x Bluetooth devices. + This protocol enables AR300x chips to be enabled with + power management support. + Enable this if you have Atheros AR300x serial Bluetooth device. + + Say Y here to compile support for HCI UART ATH3K protocol. + config BT_HCIUART_LL bool "HCILL protocol support" depends on BT_HCIUART diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 7e5aed59812..71bdf13287c 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -26,4 +26,5 @@ hci_uart-y := hci_ldisc.o hci_uart-$(CONFIG_BT_HCIUART_H4) += hci_h4.o hci_uart-$(CONFIG_BT_HCIUART_BCSP) += hci_bcsp.o hci_uart-$(CONFIG_BT_HCIUART_LL) += hci_ll.o +hci_uart-$(CONFIG_BT_HCIUART_ATH3K) += hci_ath.o hci_uart-objs := $(hci_uart-y) diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index b0c84c19f44..8b1b643a519 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -224,7 +224,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id BT_DBG("firmware data %p size %zu", firmware->data, firmware->size); - data->fw_data = kmalloc(firmware->size, GFP_KERNEL); + data->fw_data = kmemdup(firmware->data, firmware->size, GFP_KERNEL); if (!data->fw_data) { BT_ERR("Can't allocate memory for firmware image"); release_firmware(firmware); @@ -234,7 +234,6 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id return -ENOMEM; } - memcpy(data->fw_data, firmware->data, firmware->size); data->fw_size = firmware->size; data->fw_sent = 0; diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index d945cd12433..751b338d904 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -62,7 +62,7 @@ struct hci_vendor_hdr { __u8 type; __le16 snum; __le16 dlen; -} __attribute__ ((packed)); +} __packed; static int bpa10x_recv(struct hci_dev *hdev, int queue, void *buf, int count) { diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c index b50b41d97a7..54739b08c30 100644 --- a/drivers/bluetooth/btmrvl_debugfs.c +++ b/drivers/bluetooth/btmrvl_debugfs.c @@ -216,7 +216,7 @@ static const struct file_operations btmrvl_gpiogap_fops = { static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) { - struct btmrvl_private *priv = (struct btmrvl_private *) file->private_data; + struct btmrvl_private *priv = file->private_data; char buf[16]; long result, ret; diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h index bed0ba63023..90bda50dc44 100644 --- a/drivers/bluetooth/btmrvl_drv.h +++ b/drivers/bluetooth/btmrvl_drv.h @@ -76,6 +76,7 @@ struct btmrvl_private { int (*hw_host_to_card) (struct btmrvl_private *priv, u8 *payload, u16 nb); int (*hw_wakeup_firmware) (struct btmrvl_private *priv); + int (*hw_process_int_status) (struct btmrvl_private *priv); spinlock_t driver_lock; /* spinlock used by driver */ #ifdef CONFIG_DEBUG_FS void *debugfs_data; @@ -118,13 +119,13 @@ struct btmrvl_cmd { __le16 ocf_ogf; u8 length; u8 data[4]; -} __attribute__ ((packed)); +} __packed; struct btmrvl_event { u8 ec; /* event counter */ u8 length; u8 data[4]; -} __attribute__ ((packed)); +} __packed; /* Prototype of global function */ diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index ee37ef0caee..0d32ec82e9b 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -502,14 +502,17 @@ static int btmrvl_service_main_thread(void *data) spin_lock_irqsave(&priv->driver_lock, flags); if (adapter->int_count) { adapter->int_count = 0; + spin_unlock_irqrestore(&priv->driver_lock, flags); + priv->hw_process_int_status(priv); } else if (adapter->ps_state == PS_SLEEP && !skb_queue_empty(&adapter->tx_queue)) { spin_unlock_irqrestore(&priv->driver_lock, flags); adapter->wakeup_tries++; priv->hw_wakeup_firmware(priv); continue; + } else { + spin_unlock_irqrestore(&priv->driver_lock, flags); } - spin_unlock_irqrestore(&priv->driver_lock, flags); if (adapter->ps_state == PS_SLEEP) continue; diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index df0773ebd9e..dcc2a6ec23f 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -47,6 +47,7 @@ * module_exit function is called. */ static u8 user_rmmod; +static u8 sdio_ireg; static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = { .helper = "sd8688_helper.bin", @@ -83,10 +84,10 @@ static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat) *dat = 0; fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret); + if (ret) + return -EIO; - if (!ret) - fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret); - + fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret); if (ret) return -EIO; @@ -216,7 +217,7 @@ static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card) tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN); - tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL); + tmphlprbuf = kzalloc(tmphlprbufsz, GFP_KERNEL); if (!tmphlprbuf) { BT_ERR("Unable to allocate buffer for helper." " Terminating download"); @@ -224,8 +225,6 @@ static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card) goto done; } - memset(tmphlprbuf, 0, tmphlprbufsz); - helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN); /* Perform helper data transfer */ @@ -318,7 +317,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card) BT_DBG("Downloading FW image (%d bytes)", firmwarelen); tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN); - tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL); + tmpfwbuf = kzalloc(tmpfwbufsz, GFP_KERNEL); if (!tmpfwbuf) { BT_ERR("Unable to allocate buffer for firmware." " Terminating download"); @@ -326,8 +325,6 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card) goto done; } - memset(tmpfwbuf, 0, tmpfwbufsz); - /* Ensure aligned firmware buffer */ fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN); @@ -555,78 +552,79 @@ exit: return ret; } -static int btmrvl_sdio_get_int_status(struct btmrvl_private *priv, u8 * ireg) +static int btmrvl_sdio_process_int_status(struct btmrvl_private *priv) { - int ret; - u8 sdio_ireg = 0; + ulong flags; + u8 ireg; struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; - *ireg = 0; - - sdio_ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret); - if (ret) { - BT_ERR("sdio_readb: read int status register failed"); - ret = -EIO; - goto done; - } - - if (sdio_ireg != 0) { - /* - * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS - * Clear the interrupt status register and re-enable the - * interrupt. - */ - BT_DBG("sdio_ireg = 0x%x", sdio_ireg); - - sdio_writeb(card->func, ~(sdio_ireg) & (DN_LD_HOST_INT_STATUS | - UP_LD_HOST_INT_STATUS), - HOST_INTSTATUS_REG, &ret); - if (ret) { - BT_ERR("sdio_writeb: clear int status register " - "failed"); - ret = -EIO; - goto done; - } - } + spin_lock_irqsave(&priv->driver_lock, flags); + ireg = sdio_ireg; + sdio_ireg = 0; + spin_unlock_irqrestore(&priv->driver_lock, flags); - if (sdio_ireg & DN_LD_HOST_INT_STATUS) { + sdio_claim_host(card->func); + if (ireg & DN_LD_HOST_INT_STATUS) { if (priv->btmrvl_dev.tx_dnld_rdy) BT_DBG("tx_done already received: " - " int_status=0x%x", sdio_ireg); + " int_status=0x%x", ireg); else priv->btmrvl_dev.tx_dnld_rdy = true; } - if (sdio_ireg & UP_LD_HOST_INT_STATUS) + if (ireg & UP_LD_HOST_INT_STATUS) btmrvl_sdio_card_to_host(priv); - *ireg = sdio_ireg; - - ret = 0; + sdio_release_host(card->func); -done: - return ret; + return 0; } static void btmrvl_sdio_interrupt(struct sdio_func *func) { struct btmrvl_private *priv; - struct hci_dev *hcidev; struct btmrvl_sdio_card *card; + ulong flags; u8 ireg = 0; + int ret; card = sdio_get_drvdata(func); - if (card && card->priv) { - priv = card->priv; - hcidev = priv->btmrvl_dev.hcidev; + if (!card || !card->priv) { + BT_ERR("sbi_interrupt(%p) card or priv is " + "NULL, card=%p\n", func, card); + return; + } - if (btmrvl_sdio_get_int_status(priv, &ireg)) - BT_ERR("reading HOST_INT_STATUS_REG failed"); - else - BT_DBG("HOST_INT_STATUS_REG %#x", ireg); + priv = card->priv; + + ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret); + if (ret) { + BT_ERR("sdio_readb: read int status register failed"); + return; + } + + if (ireg != 0) { + /* + * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS + * Clear the interrupt status register and re-enable the + * interrupt. + */ + BT_DBG("ireg = 0x%x", ireg); - btmrvl_interrupt(priv); + sdio_writeb(card->func, ~(ireg) & (DN_LD_HOST_INT_STATUS | + UP_LD_HOST_INT_STATUS), + HOST_INTSTATUS_REG, &ret); + if (ret) { + BT_ERR("sdio_writeb: clear int status register failed"); + return; + } } + + spin_lock_irqsave(&priv->driver_lock, flags); + sdio_ireg |= ireg; + spin_unlock_irqrestore(&priv->driver_lock, flags); + + btmrvl_interrupt(priv); } static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card) @@ -930,6 +928,7 @@ static int btmrvl_sdio_probe(struct sdio_func *func, /* Initialize the interface specific function pointers */ priv->hw_host_to_card = btmrvl_sdio_host_to_card; priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw; + priv->hw_process_int_status = btmrvl_sdio_process_int_status; if (btmrvl_register_hdev(priv)) { BT_ERR("Register hdev failed!"); diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 5d9cc53bd64..d22ce3cc611 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -59,6 +59,9 @@ static struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, + /* Apple iMac11,1 */ + { USB_DEVICE(0x05ac, 0x8215) }, + /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800) }, @@ -146,6 +149,7 @@ static struct usb_device_id blacklist_table[] = { #define BTUSB_BULK_RUNNING 1 #define BTUSB_ISOC_RUNNING 2 #define BTUSB_SUSPENDING 3 +#define BTUSB_DID_ISO_RESUME 4 struct btusb_data { struct hci_dev *hdev; @@ -179,7 +183,6 @@ struct btusb_data { unsigned int sco_num; int isoc_altsetting; int suspend_count; - int did_iso_resume:1; }; static int inc_tx(struct btusb_data *data) @@ -807,7 +810,7 @@ static void btusb_work(struct work_struct *work) int err; if (hdev->conn_hash.sco_num > 0) { - if (!data->did_iso_resume) { + if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { err = usb_autopm_get_interface(data->isoc); if (err < 0) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); @@ -815,7 +818,7 @@ static void btusb_work(struct work_struct *work) return; } - data->did_iso_resume = 1; + set_bit(BTUSB_DID_ISO_RESUME, &data->flags); } if (data->isoc_altsetting != 2) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); @@ -836,10 +839,8 @@ static void btusb_work(struct work_struct *work) usb_kill_anchored_urbs(&data->isoc_anchor); __set_isoc_interface(hdev, 0); - if (data->did_iso_resume) { - data->did_iso_resume = 0; + if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) usb_autopm_put_interface(data->isoc); - } } } diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index ef044d55cb2..cbe9e44a42e 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -104,7 +104,7 @@ typedef struct { u8 type; u8 zero; u16 len; -} __attribute__ ((packed)) nsh_t; /* Nokia Specific Header */ +} __packed nsh_t; /* Nokia Specific Header */ #define NSHL 4 /* Nokia Specific Header Length */ diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c new file mode 100644 index 00000000000..6a160c17ea9 --- /dev/null +++ b/drivers/bluetooth/hci_ath.c @@ -0,0 +1,235 @@ +/* + * Atheros Communication Bluetooth HCIATH3K UART protocol + * + * HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's + * power management protocol extension to H4 to support AR300x Bluetooth Chip. + * + * Copyright (c) 2009-2010 Atheros Communications Inc. + * + * Acknowledgements: + * This file is based on hci_h4.c, which was written + * by Maxim Krasnyansky and Marcel Holtmann. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/errno.h> +#include <linux/ioctl.h> +#include <linux/skbuff.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "hci_uart.h" + +struct ath_struct { + struct hci_uart *hu; + unsigned int cur_sleep; + + struct sk_buff_head txq; + struct work_struct ctxtsw; +}; + +static int ath_wakeup_ar3k(struct tty_struct *tty) +{ + struct termios settings; + int status = tty->driver->ops->tiocmget(tty, NULL); + + if (status & TIOCM_CTS) + return status; + + /* Disable Automatic RTSCTS */ + n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); + settings.c_cflag &= ~CRTSCTS; + n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + + /* Clear RTS first */ + status = tty->driver->ops->tiocmget(tty, NULL); + tty->driver->ops->tiocmset(tty, NULL, 0x00, TIOCM_RTS); + mdelay(20); + + /* Set RTS, wake up board */ + status = tty->driver->ops->tiocmget(tty, NULL); + tty->driver->ops->tiocmset(tty, NULL, TIOCM_RTS, 0x00); + mdelay(20); + + status = tty->driver->ops->tiocmget(tty, NULL); + + n_tty_ioctl_helper(tty, NULL, TCGETS, (unsigned long)&settings); + settings.c_cflag |= CRTSCTS; + n_tty_ioctl_helper(tty, NULL, TCSETS, (unsigned long)&settings); + + return status; +} + +static void ath_hci_uart_work(struct work_struct *work) +{ + int status; + struct ath_struct *ath; + struct hci_uart *hu; + struct tty_struct *tty; + + ath = container_of(work, struct ath_struct, ctxtsw); + + hu = ath->hu; + tty = hu->tty; + + /* verify and wake up controller */ + if (ath->cur_sleep) { + status = ath_wakeup_ar3k(tty); + if (!(status & TIOCM_CTS)) + return; + } + + /* Ready to send Data */ + clear_bit(HCI_UART_SENDING, &hu->tx_state); + hci_uart_tx_wakeup(hu); +} + +/* Initialize protocol */ +static int ath_open(struct hci_uart *hu) +{ + struct ath_struct *ath; + + BT_DBG("hu %p", hu); + + ath = kzalloc(sizeof(*ath), GFP_ATOMIC); + if (!ath) + return -ENOMEM; + + skb_queue_head_init(&ath->txq); + + hu->priv = ath; + ath->hu = hu; + + INIT_WORK(&ath->ctxtsw, ath_hci_uart_work); + + return 0; +} + +/* Flush protocol data */ +static int ath_flush(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&ath->txq); + + return 0; +} + +/* Close protocol */ +static int ath_close(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&ath->txq); + + cancel_work_sync(&ath->ctxtsw); + + hu->priv = NULL; + kfree(ath); + + return 0; +} + +#define HCI_OP_ATH_SLEEP 0xFC04 + +/* Enqueue frame for transmittion */ +static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb) +{ + struct ath_struct *ath = hu->priv; + + if (bt_cb(skb)->pkt_type == HCI_SCODATA_PKT) { + kfree_skb(skb); + return 0; + } + + /* + * Update power management enable flag with parameters of + * HCI sleep enable vendor specific HCI command. + */ + if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { + struct hci_command_hdr *hdr = (void *)skb->data; + + if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP) + ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE]; + } + + BT_DBG("hu %p skb %p", hu, skb); + + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + + skb_queue_tail(&ath->txq, skb); + set_bit(HCI_UART_SENDING, &hu->tx_state); + + schedule_work(&ath->ctxtsw); + + return 0; +} + +static struct sk_buff *ath_dequeue(struct hci_uart *hu) +{ + struct ath_struct *ath = hu->priv; + + return skb_dequeue(&ath->txq); +} + +/* Recv data */ +static int ath_recv(struct hci_uart *hu, void *data, int count) +{ + if (hci_recv_stream_fragment(hu->hdev, data, count) < 0) + BT_ERR("Frame Reassembly Failed"); + + return count; +} + +static struct hci_uart_proto athp = { + .id = HCI_UART_ATH3K, + .open = ath_open, + .close = ath_close, + .recv = ath_recv, + .enqueue = ath_enqueue, + .dequeue = ath_dequeue, + .flush = ath_flush, +}; + +int __init ath_init(void) +{ + int err = hci_uart_register_proto(&athp); + + if (!err) + BT_INFO("HCIATH3K protocol initialized"); + else + BT_ERR("HCIATH3K protocol registration failed"); + + return err; +} + +int __exit ath_deinit(void) +{ + return hci_uart_unregister_proto(&athp); +} diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 42d69d4de05..9c5b2dc38e2 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -739,7 +739,7 @@ static struct hci_uart_proto bcsp = { .flush = bcsp_flush }; -int bcsp_init(void) +int __init bcsp_init(void) { int err = hci_uart_register_proto(&bcsp); @@ -751,7 +751,7 @@ int bcsp_init(void) return err; } -int bcsp_deinit(void) +int __exit bcsp_deinit(void) { return hci_uart_unregister_proto(&bcsp); } diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c index 3f038f5308a..7b8ad93e2c3 100644 --- a/drivers/bluetooth/hci_h4.c +++ b/drivers/bluetooth/hci_h4.c @@ -151,107 +151,8 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) /* Recv data */ static int h4_recv(struct hci_uart *hu, void *data, int count) { - struct h4_struct *h4 = hu->priv; - register char *ptr; - struct hci_event_hdr *eh; - struct hci_acl_hdr *ah; - struct hci_sco_hdr *sh; - register int len, type, dlen; - - BT_DBG("hu %p count %d rx_state %ld rx_count %ld", - hu, count, h4->rx_state, h4->rx_count); - - ptr = data; - while (count) { - if (h4->rx_count) { - len = min_t(unsigned int, h4->rx_count, count); - memcpy(skb_put(h4->rx_skb, len), ptr, len); - h4->rx_count -= len; count -= len; ptr += len; - - if (h4->rx_count) - continue; - - switch (h4->rx_state) { - case H4_W4_DATA: - BT_DBG("Complete data"); - - hci_recv_frame(h4->rx_skb); - - h4->rx_state = H4_W4_PACKET_TYPE; - h4->rx_skb = NULL; - continue; - - case H4_W4_EVENT_HDR: - eh = hci_event_hdr(h4->rx_skb); - - BT_DBG("Event header: evt 0x%2.2x plen %d", eh->evt, eh->plen); - - h4_check_data_len(h4, eh->plen); - continue; - - case H4_W4_ACL_HDR: - ah = hci_acl_hdr(h4->rx_skb); - dlen = __le16_to_cpu(ah->dlen); - - BT_DBG("ACL header: dlen %d", dlen); - - h4_check_data_len(h4, dlen); - continue; - - case H4_W4_SCO_HDR: - sh = hci_sco_hdr(h4->rx_skb); - - BT_DBG("SCO header: dlen %d", sh->dlen); - - h4_check_data_len(h4, sh->dlen); - continue; - } - } - - /* H4_W4_PACKET_TYPE */ - switch (*ptr) { - case HCI_EVENT_PKT: - BT_DBG("Event packet"); - h4->rx_state = H4_W4_EVENT_HDR; - h4->rx_count = HCI_EVENT_HDR_SIZE; - type = HCI_EVENT_PKT; - break; - - case HCI_ACLDATA_PKT: - BT_DBG("ACL packet"); - h4->rx_state = H4_W4_ACL_HDR; - h4->rx_count = HCI_ACL_HDR_SIZE; - type = HCI_ACLDATA_PKT; - break; - - case HCI_SCODATA_PKT: - BT_DBG("SCO packet"); - h4->rx_state = H4_W4_SCO_HDR; - h4->rx_count = HCI_SCO_HDR_SIZE; - type = HCI_SCODATA_PKT; - break; - - default: - BT_ERR("Unknown HCI packet type %2.2x", (__u8)*ptr); - hu->hdev->stat.err_rx++; - ptr++; count--; - continue; - }; - - ptr++; count--; - - /* Allocate packet */ - h4->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); - if (!h4->rx_skb) { - BT_ERR("Can't allocate mem for new packet"); - h4->rx_state = H4_W4_PACKET_TYPE; - h4->rx_count = 0; - return -ENOMEM; - } - - h4->rx_skb->dev = (void *) hu->hdev; - bt_cb(h4->rx_skb)->pkt_type = type; - } + if (hci_recv_stream_fragment(hu->hdev, data, count) < 0) + BT_ERR("Frame Reassembly Failed"); return count; } @@ -272,7 +173,7 @@ static struct hci_uart_proto h4p = { .flush = h4_flush, }; -int h4_init(void) +int __init h4_init(void) { int err = hci_uart_register_proto(&h4p); @@ -284,7 +185,7 @@ int h4_init(void) return err; } -int h4_deinit(void) +int __exit h4_deinit(void) { return hci_uart_unregister_proto(&h4p); } diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 76a1abb8f21..998833d93c1 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -210,7 +210,6 @@ static int hci_uart_close(struct hci_dev *hdev) static int hci_uart_send_frame(struct sk_buff *skb) { struct hci_dev* hdev = (struct hci_dev *) skb->dev; - struct tty_struct *tty; struct hci_uart *hu; if (!hdev) { @@ -222,7 +221,6 @@ static int hci_uart_send_frame(struct sk_buff *skb) return -EBUSY; hu = (struct hci_uart *) hdev->driver_data; - tty = hu->tty; BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len); @@ -397,6 +395,9 @@ static int hci_uart_register_dev(struct hci_uart *hu) if (!reset) set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks); + if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags)) + set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); + if (hci_register_dev(hdev) < 0) { BT_ERR("Can't register HCI device"); hci_free_dev(hdev); @@ -477,6 +478,15 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, return hu->hdev->id; return -EUNATCH; + case HCIUARTSETFLAGS: + if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) + return -EBUSY; + hu->hdev_flags = arg; + break; + + case HCIUARTGETFLAGS: + return hu->hdev_flags; + default: err = n_tty_ioctl_helper(tty, file, cmd, arg); break; @@ -542,6 +552,9 @@ static int __init hci_uart_init(void) #ifdef CONFIG_BT_HCIUART_LL ll_init(); #endif +#ifdef CONFIG_BT_HCIUART_ATH3K + ath_init(); +#endif return 0; } @@ -559,6 +572,9 @@ static void __exit hci_uart_exit(void) #ifdef CONFIG_BT_HCIUART_LL ll_deinit(); #endif +#ifdef CONFIG_BT_HCIUART_ATH3K + ath_deinit(); +#endif /* Release tty registration of line discipline */ if ((err = tty_unregister_ldisc(N_HCI))) diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c index fb8445c7365..38595e782d0 100644 --- a/drivers/bluetooth/hci_ll.c +++ b/drivers/bluetooth/hci_ll.c @@ -74,7 +74,7 @@ enum hcill_states_e { struct hcill_cmd { u8 cmd; -} __attribute__((packed)); +} __packed; struct ll_struct { unsigned long rx_state; @@ -517,7 +517,7 @@ static struct hci_uart_proto llp = { .flush = ll_flush, }; -int ll_init(void) +int __init ll_init(void) { int err = hci_uart_register_proto(&llp); @@ -529,7 +529,7 @@ int ll_init(void) return err; } -int ll_deinit(void) +int __exit ll_deinit(void) { return hci_uart_unregister_proto(&llp); } diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index 50113db06b9..99fb35239d1 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -31,15 +31,20 @@ #define HCIUARTSETPROTO _IOW('U', 200, int) #define HCIUARTGETPROTO _IOR('U', 201, int) #define HCIUARTGETDEVICE _IOR('U', 202, int) +#define HCIUARTSETFLAGS _IOW('U', 203, int) +#define HCIUARTGETFLAGS _IOR('U', 204, int) /* UART protocols */ -#define HCI_UART_MAX_PROTO 5 +#define HCI_UART_MAX_PROTO 6 #define HCI_UART_H4 0 #define HCI_UART_BCSP 1 #define HCI_UART_3WIRE 2 #define HCI_UART_H4DS 3 #define HCI_UART_LL 4 +#define HCI_UART_ATH3K 5 + +#define HCI_UART_RAW_DEVICE 0 struct hci_uart; @@ -57,6 +62,7 @@ struct hci_uart { struct tty_struct *tty; struct hci_dev *hdev; unsigned long flags; + unsigned long hdev_flags; struct hci_uart_proto *proto; void *priv; @@ -66,7 +72,7 @@ struct hci_uart { spinlock_t rx_lock; }; -/* HCI_UART flag bits */ +/* HCI_UART proto flag bits */ #define HCI_UART_PROTO_SET 0 /* TX states */ @@ -91,3 +97,8 @@ int bcsp_deinit(void); int ll_init(void); int ll_deinit(void); #endif + +#ifdef CONFIG_BT_HCIUART_ATH3K +int ath_init(void); +int ath_deinit(void); +#endif |