diff options
Diffstat (limited to 'drivers/bcma')
| -rw-r--r-- | drivers/bcma/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/bcma/Makefile | 3 | ||||
| -rw-r--r-- | drivers/bcma/bcma_private.h | 11 | ||||
| -rw-r--r-- | drivers/bcma/core.c | 75 | ||||
| -rw-r--r-- | drivers/bcma/driver_chipcommon.c | 14 | ||||
| -rw-r--r-- | drivers/bcma/driver_chipcommon_pmu.c | 6 | ||||
| -rw-r--r-- | drivers/bcma/driver_pci.c | 64 | ||||
| -rw-r--r-- | drivers/bcma/driver_pci_host.c | 14 | ||||
| -rw-r--r-- | drivers/bcma/host_pci.c | 53 | ||||
| -rw-r--r-- | drivers/bcma/main.c | 14 | ||||
| -rw-r--r-- | drivers/bcma/sprom.c | 171 |
11 files changed, 428 insertions, 8 deletions
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig index 353781b5b78..ae0a02e1b80 100644 --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -13,6 +13,11 @@ config BCMA Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture. +# Support for Block-I/O. SELECT this from the driver that needs it. +config BCMA_BLOCKIO + bool + depends on BCMA + config BCMA_HOST_PCI_POSSIBLE bool depends on BCMA && PCI = y @@ -22,6 +27,12 @@ config BCMA_HOST_PCI bool "Support for BCMA on PCI-host bus" depends on BCMA_HOST_PCI_POSSIBLE +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" + depends on BCMA && MIPS + help + PCI core hostmode operation (external PCI bus). + config BCMA_DEBUG bool "BCMA debugging" depends on BCMA diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile index 0d56245bcb7..a2161cceafb 100644 --- a/drivers/bcma/Makefile +++ b/drivers/bcma/Makefile @@ -1,6 +1,7 @@ -bcma-y += main.o scan.o core.o +bcma-y += main.o scan.o core.o sprom.o bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o obj-$(CONFIG_BCMA) += bcma.o diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 2f72e9c585f..e02ff21835c 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -13,16 +13,23 @@ struct bcma_bus; /* main.c */ -extern int bcma_bus_register(struct bcma_bus *bus); -extern void bcma_bus_unregister(struct bcma_bus *bus); +int bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); /* scan.c */ int bcma_bus_scan(struct bcma_bus *bus); +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + #ifdef CONFIG_BCMA_HOST_PCI /* host_pci.c */ extern int __init bcma_host_pci_init(void); extern void __exit bcma_host_pci_exit(void); #endif /* CONFIG_BCMA_HOST_PCI */ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + #endif diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c index ced379f7b37..4a04a49cc06 100644 --- a/drivers/bcma/core.c +++ b/drivers/bcma/core.c @@ -19,7 +19,7 @@ bool bcma_core_is_enabled(struct bcma_device *core) } EXPORT_SYMBOL_GPL(bcma_core_is_enabled); -static void bcma_core_disable(struct bcma_device *core, u32 flags) +void bcma_core_disable(struct bcma_device *core, u32 flags) { if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) return; @@ -31,6 +31,7 @@ static void bcma_core_disable(struct bcma_device *core, u32 flags) bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); udelay(1); } +EXPORT_SYMBOL_GPL(bcma_core_disable); int bcma_core_enable(struct bcma_device *core, u32 flags) { @@ -49,3 +50,75 @@ int bcma_core_enable(struct bcma_device *core, u32 flags) return 0; } EXPORT_SYMBOL_GPL(bcma_core_enable); + +void bcma_core_set_clockmode(struct bcma_device *core, + enum bcma_clkmode clkmode) +{ + u16 i; + + WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON && + core->id.id != BCMA_CORE_PCIE && + core->id.id != BCMA_CORE_80211); + + switch (clkmode) { + case BCMA_CLKMODE_FAST: + bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); + udelay(64); + for (i = 0; i < 1500; i++) { + if (bcma_read32(core, BCMA_CLKCTLST) & + BCMA_CLKCTLST_HAVEHT) { + i = 0; + break; + } + udelay(10); + } + if (i) + pr_err("HT force timeout\n"); + break; + case BCMA_CLKMODE_DYNAMIC: + pr_warn("Dynamic clockmode not supported yet!\n"); + break; + } +} +EXPORT_SYMBOL_GPL(bcma_core_set_clockmode); + +void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on) +{ + u16 i; + + WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ); + WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST); + + if (on) { + bcma_set32(core, BCMA_CLKCTLST, req); + for (i = 0; i < 10000; i++) { + if ((bcma_read32(core, BCMA_CLKCTLST) & status) == + status) { + i = 0; + break; + } + udelay(10); + } + if (i) + pr_err("PLL enable timeout\n"); + } else { + pr_warn("Disabling PLL not supported yet!\n"); + } +} +EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); + +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; + else + return BCMA_DMA_TRANSLATION_DMA32_CMT; + default: + pr_err("DMA translation unknown for host %d\n", + core->bus->hosttype); + } + return BCMA_DMA_TRANSLATION_NONE; +} +EXPORT_SYMBOL(bcma_core_dma_translation); diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c index 5d4848a3d18..851e05bc948 100644 --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c @@ -23,6 +23,9 @@ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) { + u32 leddc_on = 10; + u32 leddc_off = 90; + if (cc->core->id.rev >= 11) cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); @@ -38,6 +41,17 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) bcma_pmu_init(cc); if (cc->capabilities & BCMA_CC_CAP_PCTL) pr_err("Power control not implemented!\n"); + + if (cc->core->id.rev >= 16) { + if (cc->core->bus->sprom.leddc_on_time && + cc->core->bus->sprom.leddc_off_time) { + leddc_on = cc->core->bus->sprom.leddc_on_time; + leddc_off = cc->core->bus->sprom.leddc_off_time; + } + bcma_cc_write32(cc, BCMA_CC_GPIOTIMER, + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } } /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c index b4eb33524eb..fcc63db0ce7 100644 --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -53,6 +53,7 @@ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) max_msk = 0xFFFF; break; case 43224: + case 43225: break; default: pr_err("PMU resource config unknown for device 0x%04X\n", @@ -74,6 +75,7 @@ void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) case 0x4313: case 0x4331: case 43224: + case 43225: break; default: pr_err("PMU switch/regulators init unknown for device " @@ -96,11 +98,13 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc) if (bus->chipinfo.rev == 0) { pr_err("Workarounds for 43224 rev 0 not fully " "implemented\n"); - bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); } else { bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); } break; + case 43225: + break; default: pr_err("Workarounds unknown for device 0x%04X\n", bus->chipinfo.id); diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index 1acc30263f2..25f3ddf3382 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -157,7 +157,69 @@ static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) * Init. **************************************************/ -void bcma_core_pci_init(struct bcma_drv_pci *pc) +static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) { bcma_pcicore_serdes_workaround(pc); } + +static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +{ + struct bcma_bus *bus = pc->core->bus; + u16 chipid_top; + + chipid_top = (bus->chipinfo.id & 0xFF00); + if (chipid_top != 0x4700 && + chipid_top != 0x5300) + return false; + +#ifdef CONFIG_SSB_DRIVER_PCICORE + if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) + return false; +#endif /* CONFIG_SSB_DRIVER_PCICORE */ + +#if 0 + /* TODO: on BCMA we use address from EROM instead of magic formula */ + u32 tmp; + return !mips_busprobe32(tmp, (bus->mmio + + (pc->core->core_index * BCMA_CORE_SIZE))); +#endif + + return true; +} + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + bcma_core_pci_hostmode_init(pc); +#else + pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + } else { + bcma_core_pci_clientmode_init(pc); + } +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, + bool enable) +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; + int err; + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) + goto out; + + coremask = BIT(core->core_index) << 8; + if (enable) + tmp |= coremask; + else + tmp &= ~coremask; + + err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); + +out: + return err; +} +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c new file mode 100644 index 00000000000..eb332b75ce8 --- /dev/null +++ b/drivers/bcma/driver_pci_host.c @@ -0,0 +1,14 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/bcma/bcma.h> + +void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) +{ + pr_err("No support for PCI core in hostmode yet\n"); +} diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c index 471a04013fe..ac4bc626c14 100644 --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -65,6 +65,54 @@ static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, iowrite32(value, core->bus->mmio + offset); } +#ifdef CONFIG_BCMA_BLOCKIO +void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + ioread8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + ioread16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + ioread32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} + +void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + iowrite8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + iowrite16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + iowrite32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} +#endif + static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) { if (core->bus->mapped_core != core) @@ -87,6 +135,10 @@ const struct bcma_host_ops bcma_host_pci_ops = { .write8 = bcma_host_pci_write8, .write16 = bcma_host_pci_write16, .write32 = bcma_host_pci_write32, +#ifdef CONFIG_BCMA_BLOCKIO + .block_read = bcma_host_pci_block_read, + .block_write = bcma_host_pci_block_write, +#endif .aread32 = bcma_host_pci_aread32, .awrite32 = bcma_host_pci_awrite32, }; @@ -175,6 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index be52344ed19..873e2e4ac55 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -7,6 +7,7 @@ #include "bcma_private.h" #include <linux/bcma/bcma.h> +#include <linux/slab.h> MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); @@ -89,6 +90,8 @@ static int bcma_register_cores(struct bcma_bus *bus) switch (bus->hosttype) { case BCMA_HOSTTYPE_PCI: core->dev.parent = &bus->host_pci->dev; + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; break; case BCMA_HOSTTYPE_NONE: case BCMA_HOSTTYPE_SDIO: @@ -144,6 +147,15 @@ int bcma_bus_register(struct bcma_bus *bus) bcma_core_pci_init(&bus->drv_pci); } + /* Try to get SPROM */ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); + } else if (err) { + pr_err("Failed to get SPROM: %d\n", err); + return -ENOENT; + } + /* Register found cores */ bcma_register_cores(bus); @@ -151,13 +163,11 @@ int bcma_bus_register(struct bcma_bus *bus) return 0; } -EXPORT_SYMBOL_GPL(bcma_bus_register); void bcma_bus_unregister(struct bcma_bus *bus) { bcma_unregister_cores(bus); } -EXPORT_SYMBOL_GPL(bcma_bus_unregister); int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) { diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c new file mode 100644 index 00000000000..8b5b7856abe --- /dev/null +++ b/drivers/bcma/sprom.c @@ -0,0 +1,171 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" + +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_regs.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +#define SPOFF(offset) ((offset) / sizeof(u16)) + +/************************************************** + * R/W ops. + **************************************************/ + +static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) +{ + int i; + for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) + sprom[i] = bcma_read16(bus->drv_cc.core, + offset + (i * 2)); +} + +/************************************************** + * Validation. + **************************************************/ + +static inline u8 bcma_crc8(u8 crc, u8 data) +{ + /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ + static const u8 t[] = { + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, + }; + return t[crc ^ data]; +} + +static u8 bcma_sprom_crc(const u16 *sprom) +{ + int word; + u8 crc = 0xFF; + + for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { + crc = bcma_crc8(crc, sprom[word] & 0x00FF); + crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); + } + crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); + crc ^= 0xFF; + + return crc; +} + +static int bcma_sprom_check_crc(const u16 *sprom) +{ + u8 crc; + u8 expected_crc; + u16 tmp; + + crc = bcma_sprom_crc(sprom); + tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; + expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; + if (crc != expected_crc) + return -EPROTO; + + return 0; +} + +static int bcma_sprom_valid(const u16 *sprom) +{ + u16 revision; + int err; + + err = bcma_sprom_check_crc(sprom); + if (err) + return err; + + revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; + if (revision != 8 && revision != 9) { + pr_err("Unsupported SPROM revision: %d\n", revision); + return -ENOENT; + } + + return 0; +} + +/************************************************** + * SPROM extraction. + **************************************************/ + +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ + u16 v; + int i; + + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ + u16 offset; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + + if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) + return -ENOENT; + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!sprom) + return -ENOMEM; + + /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). + * According to brcm80211 this applies to cards with PCIe rev >= 6 + * TODO: understand this condition and use it */ + offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : + BCMA_CC_SPROM_PCIE6; + bcma_sprom_read(bus, offset, sprom); + + err = bcma_sprom_valid(sprom); + if (err) + goto out; + + bcma_sprom_extract_r8(bus, sprom); + +out: + kfree(sprom); + return err; +} |