diff options
Diffstat (limited to 'drivers/atm/uPD98401.h')
| -rw-r--r-- | drivers/atm/uPD98401.h | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/drivers/atm/uPD98401.h b/drivers/atm/uPD98401.h new file mode 100644 index 00000000000..0ab36503a4b --- /dev/null +++ b/drivers/atm/uPD98401.h @@ -0,0 +1,292 @@ +/* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */ + +/* Written 1995 by Werner Almesberger, EPFL LRC */ + + +#ifndef DRIVERS_ATM_uPD98401_H +#define DRIVERS_ATM_uPD98401_H + + +#define MAX_CRAM_SIZE (1 << 18) /* 2^18 words */ +#define RAM_INCREMENT 1024 /* check in 4 kB increments */ + +#define uPD98401_PORTS 0x24 /* probably more ? */ + + +/* + * Commands + */ + +#define uPD98401_OPEN_CHAN 0x20000000 /* open channel */ +#define uPD98401_CHAN_ADDR 0x0003fff8 /* channel address */ +#define uPD98401_CHAN_ADDR_SHIFT 3 +#define uPD98401_CLOSE_CHAN 0x24000000 /* close channel */ +#define uPD98401_CHAN_RT 0x02000000 /* RX/TX (0 TX, 1 RX) */ +#define uPD98401_DEACT_CHAN 0x28000000 /* deactivate channel */ +#define uPD98401_TX_READY 0x30000000 /* TX ready */ +#define uPD98401_ADD_BAT 0x34000000 /* add batches */ +#define uPD98401_POOL 0x000f0000 /* pool number */ +#define uPD98401_POOL_SHIFT 16 +#define uPD98401_POOL_NUMBAT 0x0000ffff /* number of batches */ +#define uPD98401_NOP 0x3f000000 /* NOP */ +#define uPD98401_IND_ACC 0x00000000 /* Indirect Access */ +#define uPD98401_IA_RW 0x10000000 /* Read/Write (0 W, 1 R) */ +#define uPD98401_IA_B3 0x08000000 /* Byte select, 1 enable */ +#define uPD98401_IA_B2 0x04000000 +#define uPD98401_IA_B1 0x02000000 +#define uPD98401_IA_B0 0x01000000 +#define uPD98401_IA_BALL 0x0f000000 /* whole longword */ +#define uPD98401_IA_TGT 0x000c0000 /* Target */ +#define uPD98401_IA_TGT_SHIFT 18 +#define uPD98401_IA_TGT_CM 0 /* - Control Memory */ +#define uPD98401_IA_TGT_SAR 1 /* - uPD98401 registers */ +#define uPD98401_IA_TGT_PHY 3 /* - PHY device */ +#define uPD98401_IA_ADDR 0x0003ffff + +/* + * Command Register Status + */ + +#define uPD98401_BUSY 0x80000000 /* SAR is busy */ +#define uPD98401_LOCKED 0x40000000 /* SAR is locked by other CPU */ + +/* + * Indications + */ + +/* Normal (AAL5) Receive Indication */ +#define uPD98401_AAL5_UINFO 0xffff0000 /* user-supplied information */ +#define uPD98401_AAL5_UINFO_SHIFT 16 +#define uPD98401_AAL5_SIZE 0x0000ffff /* PDU size (in _CELLS_ !!) */ +#define uPD98401_AAL5_CHAN 0x7fff0000 /* Channel number */ +#define uPD98401_AAL5_CHAN_SHIFT 16 +#define uPD98401_AAL5_ERR 0x00008000 /* Error indication */ +#define uPD98401_AAL5_CI 0x00004000 /* Congestion Indication */ +#define uPD98401_AAL5_CLP 0x00002000 /* CLP (>= 1 cell had CLP=1) */ +#define uPD98401_AAL5_ES 0x00000f00 /* Error Status */ +#define uPD98401_AAL5_ES_SHIFT 8 +#define uPD98401_AAL5_ES_NONE 0 /* No error */ +#define uPD98401_AAL5_ES_FREE 1 /* Receiver free buf underflow */ +#define uPD98401_AAL5_ES_FIFO 2 /* Receiver FIFO overrun */ +#define uPD98401_AAL5_ES_TOOBIG 3 /* Maximum length violation */ +#define uPD98401_AAL5_ES_CRC 4 /* CRC error */ +#define uPD98401_AAL5_ES_ABORT 5 /* User abort */ +#define uPD98401_AAL5_ES_LENGTH 6 /* Length violation */ +#define uPD98401_AAL5_ES_T1 7 /* T1 error (timeout) */ +#define uPD98401_AAL5_ES_DEACT 8 /* Deactivated with DEACT_CHAN */ +#define uPD98401_AAL5_POOL 0x0000001f /* Free buffer pool number */ + +/* Raw Cell Indication */ +#define uPD98401_RAW_UINFO uPD98401_AAL5_UINFO +#define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT +#define uPD98401_RAW_HEC 0x000000ff /* HEC */ +#define uPD98401_RAW_CHAN uPD98401_AAL5_CHAN +#define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT + +/* Transmit Indication */ +#define uPD98401_TXI_CONN 0x7fff0000 /* Connection Number */ +#define uPD98401_TXI_CONN_SHIFT 16 +#define uPD98401_TXI_ACTIVE 0x00008000 /* Channel remains active */ +#define uPD98401_TXI_PQP 0x00007fff /* Packet Queue Pointer */ + +/* + * Directly Addressable Registers + */ + +#define uPD98401_GMR 0x00 /* General Mode Register */ +#define uPD98401_GSR 0x01 /* General Status Register */ +#define uPD98401_IMR 0x02 /* Interrupt Mask Register */ +#define uPD98401_RQU 0x03 /* Receive Queue Underrun */ +#define uPD98401_RQA 0x04 /* Receive Queue Alert */ +#define uPD98401_ADDR 0x05 /* Last Burst Address */ +#define uPD98401_VER 0x06 /* Version Number */ +#define uPD98401_SWR 0x07 /* Software Reset */ +#define uPD98401_CMR 0x08 /* Command Register */ +#define uPD98401_CMR_L 0x09 /* Command Register and Lock/Unlock */ +#define uPD98401_CER 0x0a /* Command Extension Register */ +#define uPD98401_CER_L 0x0b /* Command Ext Reg and Lock/Unlock */ + +#define uPD98401_MSH(n) (0x10+(n)) /* Mailbox n Start Address High */ +#define uPD98401_MSL(n) (0x14+(n)) /* Mailbox n Start Address High */ +#define uPD98401_MBA(n) (0x18+(n)) /* Mailbox n Bottom Address */ +#define uPD98401_MTA(n) (0x1c+(n)) /* Mailbox n Tail Address */ +#define uPD98401_MWA(n) (0x20+(n)) /* Mailbox n Write Address */ + +/* GMR is at 0x00 */ +#define uPD98401_GMR_ONE 0x80000000 /* Must be set to one */ +#define uPD98401_GMR_SLM 0x40000000 /* Address mode (0 word, 1 byte) */ +#define uPD98401_GMR_CPE 0x00008000 /* Control Memory Parity Enable */ +#define uPD98401_GMR_LP 0x00004000 /* Loopback */ +#define uPD98401_GMR_WA 0x00002000 /* Early Bus Write Abort/RDY */ +#define uPD98401_GMR_RA 0x00001000 /* Early Read Abort/RDY */ +#define uPD98401_GMR_SZ 0x00000f00 /* Burst Size Enable */ +#define uPD98401_BURST16 0x00000800 /* 16-word burst */ +#define uPD98401_BURST8 0x00000400 /* 8-word burst */ +#define uPD98401_BURST4 0x00000200 /* 4-word burst */ +#define uPD98401_BURST2 0x00000100 /* 2-word burst */ +#define uPD98401_GMR_AD 0x00000080 /* Address (burst resolution) Disable */ +#define uPD98401_GMR_BO 0x00000040 /* Byte Order (0 little, 1 big) */ +#define uPD98401_GMR_PM 0x00000020 /* Bus Parity Mode (0 byte, 1 word)*/ +#define uPD98401_GMR_PC 0x00000010 /* Bus Parity Control (0even,1odd) */ +#define uPD98401_GMR_BPE 0x00000008 /* Bus Parity Enable */ +#define uPD98401_GMR_DR 0x00000004 /* Receive Drop Mode (0drop,1don't)*/ +#define uPD98401_GMR_SE 0x00000002 /* Shapers Enable */ +#define uPD98401_GMR_RE 0x00000001 /* Receiver Enable */ + +/* GSR is at 0x01, IMR is at 0x02 */ +#define uPD98401_INT_PI 0x80000000 /* PHY interrupt */ +#define uPD98401_INT_RQA 0x40000000 /* Receive Queue Alert */ +#define uPD98401_INT_RQU 0x20000000 /* Receive Queue Underrun */ +#define uPD98401_INT_RD 0x10000000 /* Receiver Deactivated */ +#define uPD98401_INT_SPE 0x08000000 /* System Parity Error */ +#define uPD98401_INT_CPE 0x04000000 /* Control Memory Parity Error */ +#define uPD98401_INT_SBE 0x02000000 /* System Bus Error */ +#define uPD98401_INT_IND 0x01000000 /* Initialization Done */ +#define uPD98401_INT_RCR 0x0000ff00 /* Raw Cell Received */ +#define uPD98401_INT_RCR_SHIFT 8 +#define uPD98401_INT_MF 0x000000f0 /* Mailbox Full */ +#define uPD98401_INT_MF_SHIFT 4 +#define uPD98401_INT_MM 0x0000000f /* Mailbox Modified */ + +/* VER is at 0x06 */ +#define uPD98401_MAJOR 0x0000ff00 /* Major revision */ +#define uPD98401_MAJOR_SHIFT 8 +#define uPD98401_MINOR 0x000000ff /* Minor revision */ + +/* + * Indirectly Addressable Registers + */ + +#define uPD98401_IM(n) (0x40000+(n)) /* Scheduler n I and M */ +#define uPD98401_X(n) (0x40010+(n)) /* Scheduler n X */ +#define uPD98401_Y(n) (0x40020+(n)) /* Scheduler n Y */ +#define uPD98401_PC(n) (0x40030+(n)) /* Scheduler n P, C, p and c */ +#define uPD98401_PS(n) (0x40040+(n)) /* Scheduler n priority and status */ + +/* IM contents */ +#define uPD98401_IM_I 0xff000000 /* I */ +#define uPD98401_IM_I_SHIFT 24 +#define uPD98401_IM_M 0x00ffffff /* M */ + +/* PC contents */ +#define uPD98401_PC_P 0xff000000 /* P */ +#define uPD98401_PC_P_SHIFT 24 +#define uPD98401_PC_C 0x00ff0000 /* C */ +#define uPD98401_PC_C_SHIFT 16 +#define uPD98401_PC_p 0x0000ff00 /* p */ +#define uPD98401_PC_p_SHIFT 8 +#define uPD98401_PC_c 0x000000ff /* c */ + +/* PS contents */ +#define uPD98401_PS_PRIO 0xf0 /* Priority level (0 high, 15 low) */ +#define uPD98401_PS_PRIO_SHIFT 4 +#define uPD98401_PS_S 0x08 /* Scan - must be 0 (internal) */ +#define uPD98401_PS_R 0x04 /* Round Robin (internal) */ +#define uPD98401_PS_A 0x02 /* Active (internal) */ +#define uPD98401_PS_E 0x01 /* Enabled */ + +#define uPD98401_TOS 0x40100 /* Top of Stack Control Memory Address */ +#define uPD98401_SMA 0x40200 /* Shapers Control Memory Start Address */ +#define uPD98401_PMA 0x40201 /* Receive Pool Control Memory Start Address */ +#define uPD98401_T1R 0x40300 /* T1 Register */ +#define uPD98401_VRR 0x40301 /* VPI/VCI Reduction Register/Recv. Shutdown */ +#define uPD98401_TSR 0x40302 /* Time-Stamp Register */ + +/* VRR is at 0x40301 */ +#define uPD98401_VRR_SDM 0x80000000 /* Shutdown Mode */ +#define uPD98401_VRR_SHIFT 0x000f0000 /* VPI/VCI Shift */ +#define uPD98401_VRR_SHIFT_SHIFT 16 +#define uPD98401_VRR_MASK 0x0000ffff /* VPI/VCI mask */ + +/* + * TX packet descriptor + */ + +#define uPD98401_TXPD_SIZE 16 /* descriptor size (in bytes) */ + +#define uPD98401_TXPD_V 0x80000000 /* Valid bit */ +#define uPD98401_TXPD_DP 0x40000000 /* Descriptor (1) or Pointer (0) */ +#define uPD98401_TXPD_SM 0x20000000 /* Single (1) or Multiple (0) */ +#define uPD98401_TXPD_CLPM 0x18000000 /* CLP mode */ +#define uPD98401_CLPM_0 0 /* 00 CLP = 0 */ +#define uPD98401_CLPM_1 3 /* 11 CLP = 1 */ +#define uPD98401_CLPM_LAST 1 /* 01 CLP unless last cell */ +#define uPD98401_TXPD_CLPM_SHIFT 27 +#define uPD98401_TXPD_PTI 0x07000000 /* PTI pattern */ +#define uPD98401_TXPD_PTI_SHIFT 24 +#define uPD98401_TXPD_GFC 0x00f00000 /* GFC pattern */ +#define uPD98401_TXPD_GFC_SHIFT 20 +#define uPD98401_TXPD_C10 0x00040000 /* insert CRC-10 */ +#define uPD98401_TXPD_AAL5 0x00020000 /* AAL5 processing */ +#define uPD98401_TXPD_MB 0x00010000 /* TX mailbox number */ +#define uPD98401_TXPD_UU 0x0000ff00 /* CPCS-UU */ +#define uPD98401_TXPD_UU_SHIFT 8 +#define uPD98401_TXPD_CPI 0x000000ff /* CPI */ + +/* + * TX buffer descriptor + */ + +#define uPD98401_TXBD_SIZE 8 /* descriptor size (in bytes) */ + +#define uPD98401_TXBD_LAST 0x80000000 /* last buffer in packet */ + +/* + * TX VC table + */ + +/* 1st word has the same structure as in a TX packet descriptor */ +#define uPD98401_TXVC_L 0x80000000 /* last buffer */ +#define uPD98401_TXVC_SHP 0x0f000000 /* shaper number */ +#define uPD98401_TXVC_SHP_SHIFT 24 +#define uPD98401_TXVC_VPI 0x00ff0000 /* VPI */ +#define uPD98401_TXVC_VPI_SHIFT 16 +#define uPD98401_TXVC_VCI 0x0000ffff /* VCI */ +#define uPD98401_TXVC_QRP 6 /* Queue Read Pointer is in word 6 */ + +/* + * RX free buffer pools descriptor + */ + +#define uPD98401_RXFP_ALERT 0x70000000 /* low water mark */ +#define uPD98401_RXFP_ALERT_SHIFT 28 +#define uPD98401_RXFP_BFSZ 0x0f000000 /* buffer size, 64*2^n */ +#define uPD98401_RXFP_BFSZ_SHIFT 24 +#define uPD98401_RXFP_BTSZ 0x00ff0000 /* batch size, n+1 */ +#define uPD98401_RXFP_BTSZ_SHIFT 16 +#define uPD98401_RXFP_REMAIN 0x0000ffff /* remaining batches in pool */ + +/* + * RX VC table + */ + +#define uPD98401_RXVC_BTSZ 0xff000000 /* remaining free buffers in batch */ +#define uPD98401_RXVC_BTSZ_SHIFT 24 +#define uPD98401_RXVC_MB 0x00200000 /* RX mailbox number */ +#define uPD98401_RXVC_POOL 0x001f0000 /* free buffer pool number */ +#define uPD98401_RXVC_POOL_SHIFT 16 +#define uPD98401_RXVC_UINFO 0x0000ffff /* user-supplied information */ +#define uPD98401_RXVC_T1 0xffff0000 /* T1 timestamp */ +#define uPD98401_RXVC_T1_SHIFT 16 +#define uPD98401_RXVC_PR 0x00008000 /* Packet Reception, 1 if busy */ +#define uPD98401_RXVC_DR 0x00004000 /* FIFO Drop */ +#define uPD98401_RXVC_OD 0x00001000 /* Drop OAM cells */ +#define uPD98401_RXVC_AR 0x00000800 /* AAL5 or raw cell; 1 if AAL5 */ +#define uPD98401_RXVC_MAXSEG 0x000007ff /* max number of segments per PDU */ +#define uPD98401_RXVC_REM 0xfffe0000 /* remaining words in curr buffer */ +#define uPD98401_RXVC_REM_SHIFT 17 +#define uPD98401_RXVC_CLP 0x00010000 /* CLP received */ +#define uPD98401_RXVC_BFA 0x00008000 /* Buffer Assigned */ +#define uPD98401_RXVC_BTA 0x00004000 /* Batch Assigned */ +#define uPD98401_RXVC_CI 0x00002000 /* Congestion Indication */ +#define uPD98401_RXVC_DD 0x00001000 /* Dropping incoming cells */ +#define uPD98401_RXVC_DP 0x00000800 /* like PR ? */ +#define uPD98401_RXVC_CURSEG 0x000007ff /* Current Segment count */ + +/* + * RX lookup table + */ + +#define uPD98401_RXLT_ENBL 0x8000 /* Enable */ + +#endif |