diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 1 | ||||
-rw-r--r-- | drivers/ata/Makefile | 1 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 11 | ||||
-rw-r--r-- | drivers/ata/ahci.h | 1 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 16 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 11 | ||||
-rw-r--r-- | drivers/ata/libata-sff.c | 4 | ||||
-rw-r--r-- | drivers/ata/pata_cmd64x.c | 6 | ||||
-rw-r--r-- | drivers/ata/pata_legacy.c | 15 | ||||
-rw-r--r-- | drivers/ata/pata_winbond.c | 282 | ||||
-rw-r--r-- | drivers/ata/sata_dwc_460ex.c | 6 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 44 |
12 files changed, 87 insertions, 311 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 65e3e270837..11ec911016c 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -828,6 +828,7 @@ config PATA_SAMSUNG_CF config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" depends on ISA && EXPERIMENTAL + select PATA_LEGACY help Support for the Winbond W83759A controller on Vesa Local Bus systems. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 158eaa961b1..d5df04a395c 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -89,7 +89,6 @@ obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o -obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o obj-$(CONFIG_PATA_PXA) += pata_pxa.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fe75d8befc3..013727b2041 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -60,6 +60,7 @@ enum board_ids { board_ahci, board_ahci_ign_iferr, board_ahci_nosntf, + board_ahci_yes_fbs, /* board IDs for specific chipsets in alphabetical order */ board_ahci_mcp65, @@ -132,6 +133,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_yes_fbs] = + { + AHCI_HFLAGS (AHCI_HFLAG_YES_FBS), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, /* by chipsets */ [board_ahci_mcp65] = { @@ -362,6 +371,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + { PCI_DEVICE(0x1b4b, 0x9123), + .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 7113c572447..474427b6f99 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -209,6 +209,7 @@ enum { link offline */ AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */ AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */ + AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */ /* ap->flags bits */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 81e772a94d5..666850d31df 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -430,6 +430,12 @@ void ahci_save_initial_config(struct device *dev, cap &= ~HOST_CAP_SNTF; } + if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) { + dev_printk(KERN_INFO, dev, + "controller can do FBS, turning on CAP_FBS\n"); + cap |= HOST_CAP_FBS; + } + if (force_port_map && port_map != force_port_map) { dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n", port_map, force_port_map); @@ -2036,9 +2042,15 @@ static int ahci_port_start(struct ata_port *ap) u32 cmd = readl(port_mmio + PORT_CMD); if (cmd & PORT_CMD_FBSCP) pp->fbs_supported = true; - else + else if (hpriv->flags & AHCI_HFLAG_YES_FBS) { + dev_printk(KERN_INFO, dev, + "port %d can do FBS, forcing FBSCP\n", + ap->port_no); + pp->fbs_supported = true; + } else dev_printk(KERN_WARNING, dev, - "The port is not capable of FBS\n"); + "port %d is not capable of FBS\n", + ap->port_no); } if (pp->fbs_supported) { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 7ef7c4f216f..c035b3d041e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5111,15 +5111,18 @@ void ata_qc_issue(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_ACTIVE; ap->qc_active |= 1 << qc->tag; - /* We guarantee to LLDs that they will have at least one + /* + * We guarantee to LLDs that they will have at least one * non-zero sg if the command is a data command. */ - BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); + if (WARN_ON_ONCE(ata_is_data(prot) && + (!qc->sg || !qc->n_elem || !qc->nbytes))) + goto sys_err; if (ata_is_dma(prot) || (ata_is_pio(prot) && (ap->flags & ATA_FLAG_PIO_DMA))) if (ata_sg_setup(qc)) - goto sg_err; + goto sys_err; /* if device is sleeping, schedule reset and abort the link */ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { @@ -5136,7 +5139,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) goto err; return; -sg_err: +sys_err: qc->err_mask |= AC_ERR_SYSTEM; err: ata_qc_complete(qc); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 674c1436491..3b82d8ef76f 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2735,10 +2735,6 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - /* see ata_dma_blacklisted() */ - BUG_ON((ap->flags & ATA_FLAG_PIO_POLLING) && - qc->tf.protocol == ATAPI_PROT_DMA); - /* defer PIO handling to sff_qc_issue */ if (!ata_is_dma(qc->tf.protocol)) return ata_sff_qc_issue(qc); diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 9f5da1c7454..905ff76d3cb 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -121,14 +121,8 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m if (pair) { struct ata_timing tp; - ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); - if (pair->dma_mode) { - ata_timing_compute(pair, pair->dma_mode, - &tp, T, 0); - ata_timing_merge(&tp, &t, &t, ATA_TIMING_SETUP); - } } } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 9df1ff7e1ea..eaf194138f2 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -44,6 +44,9 @@ * Specific support is included for the ht6560a/ht6560b/opti82c611a/ * opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A * + * Support for the Winbond 83759A when operating in advanced mode. + * Multichip mode is not currently supported. + * * Use the autospeed and pio_mask options with: * Appian ADI/2 aka CLPD7220 or AIC25VL01. * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with @@ -135,12 +138,18 @@ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ static int qdi; /* Set to probe QDI controllers */ -static int winbond; /* Set to probe Winbond controllers, - give I/O port if non standard */ static int autospeed; /* Chip present which snoops speed changes */ static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ +#ifdef PATA_WINBOND_VLB_MODULE +static int winbond = 1; /* Set to probe Winbond controllers, + give I/O port if non standard */ +#else +static int winbond; /* Set to probe Winbond controllers, + give I/O port if non standard */ +#endif + /** * legacy_probe_add - Add interface to probe list * @port: Controller port @@ -1297,6 +1306,7 @@ MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for legacy ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("pata_winbond"); module_param(probe_all, int, 0); module_param(autospeed, int, 0); @@ -1305,6 +1315,7 @@ module_param(ht6560b, int, 0); module_param(opti82c611a, int, 0); module_param(opti82c46x, int, 0); module_param(qdi, int, 0); +module_param(winbond, int, 0); module_param(pio_mask, int, 0); module_param(iordy_mask, int, 0); diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c deleted file mode 100644 index 6d8619b6f67..00000000000 --- a/drivers/ata/pata_winbond.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * pata_winbond.c - Winbond VLB ATA controllers - * (C) 2006 Red Hat - * - * Support for the Winbond 83759A when operating in advanced mode. - * Multichip mode is not currently supported. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> -#include <linux/platform_device.h> - -#define DRV_NAME "pata_winbond" -#define DRV_VERSION "0.0.3" - -#define NR_HOST 4 /* Two winbond controllers, two channels each */ - -struct winbond_data { - unsigned long config; - struct platform_device *platform_dev; -}; - -static struct ata_host *winbond_host[NR_HOST]; -static struct winbond_data winbond_data[NR_HOST]; -static int nr_winbond_host; - -#ifdef MODULE -static int probe_winbond = 1; -#else -static int probe_winbond; -#endif - -static DEFINE_SPINLOCK(winbond_lock); - -static void winbond_writecfg(unsigned long port, u8 reg, u8 val) -{ - unsigned long flags; - spin_lock_irqsave(&winbond_lock, flags); - outb(reg, port + 0x01); - outb(val, port + 0x02); - spin_unlock_irqrestore(&winbond_lock, flags); -} - -static u8 winbond_readcfg(unsigned long port, u8 reg) -{ - u8 val; - - unsigned long flags; - spin_lock_irqsave(&winbond_lock, flags); - outb(reg, port + 0x01); - val = inb(port + 0x02); - spin_unlock_irqrestore(&winbond_lock, flags); - - return val; -} - -static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct winbond_data *winbond = ap->host->private_data; - int active, recovery; - u8 reg; - int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); - - reg = winbond_readcfg(winbond->config, 0x81); - - /* Get the timing data in cycles */ - if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ - ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); - else - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; - recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; - timing = (active << 4) | recovery; - winbond_writecfg(winbond->config, timing, reg); - - /* Load the setup timing */ - - reg = 0x35; - if (adev->class != ATA_DEV_ATA) - reg |= 0x08; /* FIFO off */ - if (!ata_pio_need_iordy(adev)) - reg |= 0x02; /* IORDY off */ - reg |= (clamp_val(t.setup, 0, 3) << 6); - winbond_writecfg(winbond->config, timing + 1, reg); -} - - -static unsigned int winbond_data_xfer(struct ata_device *dev, - unsigned char *buf, unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; - - if (ata_id_has_dword_io(dev->id)) { - if (rw == READ) - ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - - if (unlikely(slop)) { - __le32 pad; - if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); - } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } - buflen += 4 - slop; - } - } else - buflen = ata_sff_data_xfer(dev, buf, buflen, rw); - - return buflen; -} - -static struct scsi_host_template winbond_sht = { - ATA_PIO_SHT(DRV_NAME), -}; - -static struct ata_port_operations winbond_port_ops = { - .inherits = &ata_sff_port_ops, - .sff_data_xfer = winbond_data_xfer, - .cable_detect = ata_cable_40wire, - .set_piomode = winbond_set_piomode, -}; - -/** - * winbond_init_one - attach a winbond interface - * @type: Type to display - * @io: I/O port start - * @irq: interrupt line - * @fast: True if on a > 33Mhz VLB - * - * Register a VLB bus IDE interface. Such interfaces are PIO and we - * assume do not support IRQ sharing. - */ - -static __init int winbond_init_one(unsigned long port) -{ - struct platform_device *pdev; - u8 reg; - int i, rc; - - reg = winbond_readcfg(port, 0x81); - reg |= 0x80; /* jumpered mode off */ - winbond_writecfg(port, 0x81, reg); - reg = winbond_readcfg(port, 0x83); - reg |= 0xF0; /* local control */ - winbond_writecfg(port, 0x83, reg); - reg = winbond_readcfg(port, 0x85); - reg |= 0xF0; /* programmable timing */ - winbond_writecfg(port, 0x85, reg); - - reg = winbond_readcfg(port, 0x81); - - if (!(reg & 0x03)) /* Disabled */ - return -ENODEV; - - for (i = 0; i < 2 ; i ++) { - unsigned long cmd_port = 0x1F0 - (0x80 * i); - unsigned long ctl_port = cmd_port + 0x206; - struct ata_host *host; - struct ata_port *ap; - void __iomem *cmd_addr, *ctl_addr; - - if (!(reg & (1 << i))) - continue; - - pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - rc = -ENOMEM; - host = ata_host_alloc(&pdev->dev, 1); - if (!host) - goto err_unregister; - ap = host->ports[0]; - - rc = -ENOMEM; - cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); - ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); - if (!cmd_addr || !ctl_addr) - goto err_unregister; - - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); - - ap->ops = &winbond_port_ops; - ap->pio_mask = ATA_PIO4; - ap->flags |= ATA_FLAG_SLAVE_POSS; - ap->ioaddr.cmd_addr = cmd_addr; - ap->ioaddr.altstatus_addr = ctl_addr; - ap->ioaddr.ctl_addr = ctl_addr; - ata_sff_std_ports(&ap->ioaddr); - - /* hook in a private data structure per channel */ - host->private_data = &winbond_data[nr_winbond_host]; - winbond_data[nr_winbond_host].config = port; - winbond_data[nr_winbond_host].platform_dev = pdev; - - /* activate */ - rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0, - &winbond_sht); - if (rc) - goto err_unregister; - - winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev); - } - - return 0; - - err_unregister: - platform_device_unregister(pdev); - return rc; -} - -/** - * winbond_init - attach winbond interfaces - * - * Attach winbond IDE interfaces by scanning the ports it may occupy. - */ - -static __init int winbond_init(void) -{ - static const unsigned long config[2] = { 0x130, 0x1B0 }; - - int ct = 0; - int i; - - if (probe_winbond == 0) - return -ENODEV; - - /* - * Check both base addresses - */ - - for (i = 0; i < 2; i++) { - if (probe_winbond & (1<<i)) { - int ret = 0; - unsigned long port = config[i]; - - if (request_region(port, 2, "pata_winbond")) { - ret = winbond_init_one(port); - if (ret <= 0) - release_region(port, 2); - else ct+= ret; - } - } - } - if (ct != 0) - return 0; - return -ENODEV; -} - -static __exit void winbond_exit(void) -{ - int i; - - for (i = 0; i < nr_winbond_host; i++) { - ata_host_detach(winbond_host[i]); - release_region(winbond_data[i].config, 2); - platform_device_unregister(winbond_data[i].platform_dev); - } -} - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("low-level driver for Winbond VL ATA"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -module_init(winbond_init); -module_exit(winbond_exit); - -module_param(probe_winbond, int, 0); - diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index ea24c1e51be..6cf57c5c2b5 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -1459,7 +1459,7 @@ static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag) { struct scatterlist *sg = qc->sg; struct ata_port *ap = qc->ap; - u32 dma_chan; + int dma_chan; struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); int err; @@ -1588,7 +1588,7 @@ static const struct ata_port_info sata_dwc_port_info[] = { }, }; -static int sata_dwc_probe(struct of_device *ofdev, +static int sata_dwc_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct sata_dwc_device *hsdev; @@ -1702,7 +1702,7 @@ error_out: return err; } -static int sata_dwc_remove(struct of_device *ofdev) +static int sata_dwc_remove(struct platform_device *ofdev) { struct device *dev = &ofdev->dev; struct ata_host *host = dev_get_drvdata(dev); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 9463c71dd38..81982594a01 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1898,19 +1898,25 @@ static void mv_bmdma_start(struct ata_queued_cmd *qc) * LOCKING: * Inherited from caller. */ -static void mv_bmdma_stop(struct ata_queued_cmd *qc) +static void mv_bmdma_stop_ap(struct ata_port *ap) { - struct ata_port *ap = qc->ap; void __iomem *port_mmio = mv_ap_base(ap); u32 cmd; /* clear start/stop bit */ cmd = readl(port_mmio + BMDMA_CMD); - cmd &= ~ATA_DMA_START; - writelfl(cmd, port_mmio + BMDMA_CMD); + if (cmd & ATA_DMA_START) { + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); + } +} - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + mv_bmdma_stop_ap(qc->ap); } /** @@ -1934,8 +1940,21 @@ static u8 mv_bmdma_status(struct ata_port *ap) reg = readl(port_mmio + BMDMA_STATUS); if (reg & ATA_DMA_ACTIVE) status = ATA_DMA_ACTIVE; - else + else if (reg & ATA_DMA_ERR) status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + else { + /* + * Just because DMA_ACTIVE is 0 (DMA completed), + * this does _not_ mean the device is "done". + * So we should not yet be signalling ATA_DMA_INTR + * in some cases. Eg. DSM/TRIM, and perhaps others. + */ + mv_bmdma_stop_ap(ap); + if (ioread8(ap->ioaddr.altstatus_addr) & ATA_BUSY) + status = 0; + else + status = ATA_DMA_INTR; + } return status; } @@ -1995,6 +2014,9 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) switch (tf->protocol) { case ATA_PROT_DMA: + if (tf->command == ATA_CMD_DSM) + return; + /* fall-thru */ case ATA_PROT_NCQ: break; /* continue below */ case ATA_PROT_PIO: @@ -2094,6 +2116,8 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) if ((tf->protocol != ATA_PROT_DMA) && (tf->protocol != ATA_PROT_NCQ)) return; + if (tf->command == ATA_CMD_DSM) + return; /* use bmdma for this */ /* Fill in Gen IIE command request block */ if (!(tf->flags & ATA_TFLAG_WRITE)) @@ -2289,6 +2313,12 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) switch (qc->tf.protocol) { case ATA_PROT_DMA: + if (qc->tf.command == ATA_CMD_DSM) { + if (!ap->ops->bmdma_setup) /* no bmdma on GEN_I */ + return AC_ERR_OTHER; + break; /* use bmdma for this */ + } + /* fall thru */ case ATA_PROT_NCQ: mv_start_edma(ap, port_mmio, pp, qc->tf.protocol); pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK; |